The BEST Tesla Screen Swivel Tilt | Model 3 🔥 Model Y | OEM Look❗️Easy Install

No more ugly fabric wrap and velcro behind the screen! Only custom molded pieces that fit the dash perfectly. Check out this Tesla Screen Tilt / Swivel by bomely for your tesla model 3 or tesla model Y ! Share the screen with your passenger by turning it to the left or take in the full view on the driver side by turning it to the right! Step by step video shows how to install this new tilt / rotate screen which could not be an easier.
See MORE Accessories❗️👉🏻 evanmichiels.c...
$1000 OFF your Tesla Here 👉🏻 ts.la/evan87711
_____________________________________________________________________
Screen Swivel Mount for Model 3 or Model Y 👉🏻 amzn.to/3iegDac
Screwdriver Set 👉🏻 amzn.to/3gKMaRb
Drive Socket Set 👉🏻 amzn.to/3e2V2jp
Trim Removal Tool 👉🏻 amzn.to/3t1flC4
Join me on Mint where I am saving a ton on wireless. Plans start at just $15 bucks, and include high speed data, plus unlimited talk and text 👉🏻 fbuy.me/pTCXi
_____________________________________________________________________
AuTailors Floor Mats (Model 3)👉🏻 amzn.to/35Uxh8T (Model Y) 👉🏻 amzn.to/3lSFuA6
Want to see MORE Tesla Model 3 and Y Accessories?! 👉🏻 • New Accessories!! 🚗 Te...
Want a Tesla? | ⚡️Get FREE Supercharger Miles! 👉🏻 ts.la/evan87711
The Best Tesla Screen Swivel Tilt | Model 3 🔥 Model Y | OEM Look❗️Easy Install
#teslamodel3 #teslamodely #teslascreenswivel

[@EMtesla1]

*See MORE Accessories* ❗️👉🏻 evanmichiels.com/general-2 $1000 OFF your Tesla Here 👉🏻 ts.la/evan87711 Screen Swivel Mount for Model 3 or Model Y 👉🏻 amzn.to/3iegDac Screwdriver Set 👉🏻 amzn.to/3gKMaRb Drive Socket Set 👉🏻 amzn.to/3e2V2jp Trim Removal Tool 👉🏻 amzn.to/3t1flC4 AuTailors Floor Mats (Model 3)👉🏻 amzn.to/35Uxh8T (Model Y) 👉🏻 amzn.to/3lSFuA6 Join me on Mint where I am saving a ton on wireless⚠ Plans start at just $15 bucks! , and include high speed data, plus unlimited talk and text 👉🏻fbuy.me/rVUZd

[@mitchellbarnow1709]

$90.00 off with the discount code! Has anyone gotten the Amazon no fee credit card to receive $150 Amazon gift card??

[@NickM-vx8xn]

Great vid very professional Would this work for a late 2022 Tesla y made out of china model? Also, does your discount code still work and if it does I couldn’t find it below…

[@EMtesla1]

@@NickM-vx8xn yes it should work on your 2022 model y… If the code still works, it should be auto attached on the link in the description.

[@NickM-vx8xn]

@@EMtesla1 thanks Evan! ⚡️

[@NickM-vx8xn]

@@EMtesla1 damn they must have taken your discount code away 😩

[@AHuntley]

I bought a tesla model 3 2 weeks ago and have no interest in having a swivel screen, but this video was very well done. Why did I watch it? Out of curiosity. I stayed for the whole video because it was done well.

[@volcomsocom]

What a perfect tutorial video. No BS, straight to the point, and great camera work. Thanks!

[@EMtesla1]

Thank you!

[@robloxfan4271]

Tesla should put this on as standard in the model 3 and y

[@peterkn2]

I've heard that the new model S has a mount that was partially designed to swivel with motors! So, there's hope that future Teslas will have an automatic swiveling screen.

[@eusouocara23]

Hey there! Great video with ditailed instructions! Literally just finished installing this product with your vid.! Couple pointers that were missed in your video... * Make sure you put the screen on screen cleaning mode. I popped my funk on accident. * for 2021 models the temp sensor is screwed on. Not clipped. * The included hexagon screws will also work with a T-30 bit. Those screws also go in at an angle. So don't try to put them straight in. You'll have a hard time threading them. Very happy with the install and looks and functions great!

[@keyplayermark]

Here is my comment. 2022 tessie model 3. I ordered this swivel and installed it this morning. My only complaint were that the ads in your youtube were ridiculous. Following along and right at a critical point was the stupid ad popping up. The included instructions are typical in being garbage. If it was not for your video, it would have been frustrating. Your videos are excellently done and easy to follow. It was difficult getting the connector off the monitor, I could see people getting frustrated and damaging it. I would stress things like that a bit more. Well done.

[@EMtesla1]

I would Highly recommend youtube premium.

[@aronghe]

Thanks so much for this detailed vid. Worked perfectly on my 2021 MY LR. I’m so impressed by your photography skills! Also, kudos on being the brave one to blaze the trail for the rest of us 😅

[@laronda10]

I originally hated the design how they implemented the screen and this literally is making me rethink that now

[@teslatalk42069]

Tech forums is way smoother in its operation. People may not like the sleeve but who the hell looks back there anyway. Function is key to this product.

[@EMtesla1]

Hmm guess I never tried his... this is one is very smooth... have you tried this new one?

[@mitchellbarnow1709]

@@EMtesla1 Excellent feedback, Evan! Personally, I have a real problem with the Tech Forum guy’s attitude towards subscriber’s comments that he doesn’t agree with, including my own.

[@tarizzolo]

Does anyone know if they make a rotating mount that doesn't lower the screen? I'm not a fan of lowering the screen an inch and a half for swiveling.

[@Soulstrings0629]

Do you have any tips for running some wires for an illuminated dash strip from this area down to the passenger foot well? Do I have to take the entire center console out for their to be a pathway?

[@davidmordor]

This is by far the best one I’ve seen. Cleaner look. Thanks! 👍

[@EMtesla1]

Thank you

[@afzalnak]

Thank you for the great video, as it was lot easier to follow your video instead of relying on the instructions provided in the box. It took me over an hour to complete the installation. Mostly because of the tight screws and trying to use the provided tools, which made it very difficult.

[@Cole-ft4rr]

Got mine for $6 at a thrift store brand new!!!!! Just installed, thanks for the vid!

[@mowcowbell]

Wow, that should be the way it comes from the Tesla factory! Nice job, great detail shots.

[@EMtesla1]

Thank you sir !

[@ginaboyd255]

Did you power down the screen before the install?

[@ginaboyd255]

Are Bromley and Teslamize the same company. The products look identical and the box they come in is identical as well.

[@EMtesla1]

Not sure… and yes I powered down the screen, however it appears it turned back on when I was just about to remove it.

[@rickcraig1]

Just installed mine your instructions were spot on giving you five stars thanks

[@EMtesla1]

Thank you!

[@AlienwareHuy]

How long did this take you?

[@mrmangoguavaguyabano]

Very nice installation video. Your presentation gives me confidence that i can install the kit on my model y. Thank you so much!

[@nipprzewlocka]

Ive now got the problem that something move on my screen as if there was a loose connection

[@Amunra-h4x]

like it, however, with screen wire moving with screen, don't we risk the harness getting damaged ( sooner or later). would have been better to give an intermediate ( flexible and disposible ) connector cable.

[@verynick]

Wow, I didn’t know that’s possible good job!. I would like to see the long term review on this. There’s an interview of Elon regarding to this - he didn’t want to make it adjustable due to reliability.

[@Naglfar]

I was thinking the same thing, this looks awesome, but I thought, what about the cable being bent back and forth, how long will that last.

[@davidaponte118]

Just installed the kit in my 21 Y and it looks fantastic. Easy and perfect step by step directions. Looks just like it OEM. Definitely recommend

[@EMtesla1]

Awesome!

[@cristinacamero3733]

I bought mine and I'm hesitant to install it... the metal part doesn't swivel, do you have to unscrew it?

[@davidaponte118]

Are you sure it's not swiveling, it should but it's not gonna swivel easily. You don't have to unscrew it, it's all individual parts that are plug and play

[@AlienwareHuy]

How long did this take you?

[@makerspace533]

Very helpful video! Has anyone figured out that extra piece of plastic that comes with some kits? It looks like a shim and has holes that line up with the mounting holes.

[@EMtesla1]

They started shipping this with the kit to fill in the possible gap on the top of the mount. Mine didn’t have a large noticeable gap though.

[@damianlee389]

Great video! Very detailed, and easy to follow. Well done. A 2021 Model Y has me, and although it is clearly a different vehicle in the video, the install was still almost exactly the same. The one difference I noticed was mine was a 30 Torx instead of a 25. Regardless, thanks for a superb tutorial!

[@EMtesla1]

Thank you!

[@bitspieces3885]

This morning I received the swivel mount kit you are showing in this video. And this afternoon I installed it into my new 2021 Tesla Model 3 LR. It looks beautiful when Installed. You gave us clear, step by step instructions that made the installation go smoothly. So thank you for that! Also, I am very happy with the high quality of the component materials. They fit together nicely to give a clean OEM look. Can’t say enough good stuff about this excellent Swivel Mount. It’s an investment that I’ll enjoy for many years to come from the perfect viewing angle as adjusted to my liking.

[@EMtesla1]

Thank you !!

[@sagigamil460]

Can you please share a link? The one in the description is unavailable :(

[@EMtesla1]

The link works on my end.. what country are you from?

[@sagigamil460]

@@EMtesla1 Israel

[@EMtesla1]

This is probably why... they may not ship it to your country.

[@jakethunder6752]

Hello. Can you send me the link of that screen protector? Thx

[@hectorrivera66]

Great video. This will be the first mod on my 23 Model 3.

[@EMtesla1]

Right on!

[@garyvs.carsmore4607]

A fantastic video. The instructions that came with the kit are atrocious! I was sending it back and then came across your video. Thank you! Gary

[@EMtesla1]

Thanks !

[@mitchellbarnow1709]

Evan, I am really impressed! What a great looking kit and you don't have to buy it from the guy that I have a problem with! I was surprised that they didn't have you power off the screen first. I watched Hanshow's installation video and the man used pliers on the edges of his bolts, even though he had the proper socket wrenches with him. Thank you so much for being the first Tesla channel to bring this awesome product to the market!

[@cristinacamero3733]

That's a good question do you have to power off the car or The screen? Im planning on installing it tomorrow

[@sirspuki]

Looks super nice! But im always scared of these selfmade things that i will lose the warranty!

[@altf449]

They can't void your warranty I don't think unless that they can prove that the item you added/modified caused the problem.

[@justSTUMBLEDupon]

@@altf449 they can and will void your warranty. They are known for doing that with any alterations or self repairs.

[@corporatehousing5452]

I seriously doubt this would void any warranty.

[@piko3058]

I don't have a Tesla. I sumhow enjoying this

[@1976jhall]

Why is this not standard…. For sure worth the upgrade. Glad I found the video.

[@sophis17]

bought it, installed it 7/20/21 watching your video, GREAT JOB and instructions

[@EMtesla1]

Thank you

[@sophis17]

@@EMtesla1 try to use your code for another one (my daughter M3). but Amazon won’t allowed, do you have another code?

[@EMtesla1]

The one on my video is the only one I have. The code is probably a one time use… if you have another amazon account the code will probably work on that.

[@sophis17]

@@EMtesla1 thanks …will use my daughter acct. there u go again being helpful!!!!

[@barriewhite9733]

Great vid thank you. But you made it look too easy just fitted mine RHD UK model 3. Would had really struggled without you r vid.

[@KWB902]

Installed this in my 2020 model Y and find the door were you lay your phones hits the bottom of the mount and interfers with it opening all the way and the mount lowered the screen enough that it now that it hits my knee. Not happy with the design.

[@coporofrito]

Nice floor mats btw

[@EMtesla1]

Link for these in the description

[@Rick9482]

Really nice video but lower kills it for me! I subscribed.

[@terica6862]

I actually feel like I can do this. I'm ordering now!!

[@sal08ly]

Looking for the Model Y sensor plate that you will not require if you install on a Model 3.

[@Adam-cy9su]

Does it lower screen top by any amount? Others do which drops the speedo down and in line of steering whee obscuring it

[@Stone815]

If they could make it so apps could be used while driving id get this. Passenger could swivel and watch apps while I'm driving.

[@jeffreyguo3086]

But then u can’t read the speedometer

[@Nick2JZ]

Hi, you went straight to removing the screen......do we need to power off the car kinda like unplug the car 12v battery in a ICE car? Thanks!

[@EMtesla1]

I did not power off the car... no.

[@chuckswasheranddryerrepair963]

Same install on 22?

[@skyserf]

2:00 A lot of assembled in Mexico stickers there.

[@EMtesla1]

just like everything else we us in the US.

[@skyserf]

@@EMtesla1 Not everything.

[@EMtesla1]

Lol ok man.

[@johndoejntify]

Thanks to your video, the process went smoothly. 👍👌

[@kylec.4687]

After having this for awhile, how do you deal with the charger tray cover rattling against the plastic? Mine can’t fully open, it rests on the plastic from the swivel mount.

[@EMtesla1]

If you have some rattling, try out some felt tape.

[@michaellauffenburger]

I like that carbon fiber dash cover. Do you have a link for that?

[@EMtesla1]

amzn.to/3oZBL6g

[@karenfore7149]

The guy at the Tesla dealership said this would void your warranty. Anyone know if that is true?

[@EMtesla1]

This is what I found on tesla's instruction manual page 176 and this is for (ALL Accessories not just a screen mount)... WARNING: Installing non-approved parts and accessories, or performing non-approved modifications, can affect the performance of Model 3 and the safety of its occupants. Any damage caused by using or installing non-approved parts, or by performing non-approved modifications, is not covered by the warranty. WARNING: Tesla does not accept liability for death, personal injury or damage that occurs if you use or install non-approved accessories or make non-approved modifications.

[@davidrcook8126]

Excellent video...Thank you

[@TheKingOfBellerose]

Got my New Y this past Wed. Had to do this second, screen protector and Matts were first .Just Installed the kit...the real pain was getting the Thermostat under the screen and try to pull the plug, way too fragile from me to pull, so I left it and just unscrewed it from the original mount. Took about an hour, from planning and referred to this video which is great~great. Don't think I would attempt without it. Pricey hardware yes but what sold me instantly was the housing behind the screen, looks OEM for sure. Thumbs Up. Those other mounts look cheap behind the screen..

[@angelinsurancesc]

Great Video....I used your link and purchased one....btw no need for extra tools they are included the 10mm the 25mm hex and screwdrivers and pry tools...thanks again and it looks factory.

[@Itsjack66]

I’ve always said they need this and the model s need to be able to go landscape for Netflix and KZbin

[@Motham51]

Does the left side of the screen get obscured by the steering wheel?

[@EMtesla1]

No sir! Nor does get near my leg when driving.

[@Motham51]

@@EMtesla1 OK, thanks Evan.

[@utrimque]

if your screen doesn’t turn back on you need to do a hard reset, hold the 2 scroll buttons on the steering wheel for a bout 2 mins. The screen should come on with the Tesla logo, then let go of the scroll buttons. The screen will turn off again then the logo will reappear.

[@frankbommentre590]

Understanding that the phone tray door opens about 3/4 of the way on older consoles, does that limited opening make it more difficult when inserting/removing larger phones (e.g. iPhone 12 Pro Max) from the wireless charging pad?

[@EMtesla1]

Correct it opens about 3/4 of the way… it will limit your view of the phone when it’s on the dock, but I do not have any difficulty placing or removing my phone (iPhone pro max) from the dock.

[@AdrienneAJ]

So I just installed my swivel screen. Only thing that I don’t like is…I had to remove the storage under the screen. 😢😢

[@EMtesla1]

what storage did you have?

[@ahmedfakher5658]

Does this void the warranty?

[@everythingpony]

100% it does

[@jakesta11]

No it does not. Anything goes wrong just change parts back to OEM

[@ChrisFerrell]

Does it lower the screen much from the original position? It looks like the screen might be lowered slightly but I was trying to get an idea of by just how much it’s lowered. Thanks!

[@EMtesla1]

Yes slightly… please checkout my update video on this found under my channel :)

[@robgage8100]

Great tutorial , thankyou

[@JZainbear]

Fantastic install. This is the cleanest option yet. My only concern is eventually the wires in the wiring harness will shear internally from the back and forth motion. Hopefully not for many thousand cycles. If I were to get one this would be it for sure.

[@liveandletlive2894]

🤣

[@utrimque]

2022 model temperature control is different. I just shoved it in the hole and covered it with the plastic thing

[@noplayjay2104]

Does this void warranty

[@SoulCal714]

Much cleaner/OEM look compared to the alternatives on the market, and it even lowers it! It would be awesome to get the plastic covers wrapped on alcantara.🤔

[@call3951]

Great video aid for install. My kit had a few issues Wich I was able to work out. But. The console door under the screen CANNOT be open if you move the screen.

[@EMtesla1]

Reallly? Mine will rotate with the door open.

[@call3951]

@@EMtesla1 I have a 2018 Model 3. Maybe why...

[@EMtesla1]

That’s what I have.

[@Meaderf]

How firm is the swivel? Does have a/any locking point(s) throughout the radius of swivel? Does/can it move out of position on its own after a bumpy ride?

[@EMtesla1]

It's very firm.. has several locking positions and will not move not matter how crazy of a driver you are.

[@corporatehousing5452]

It didn’t appear to be firm and I didn’t see any locking points of hear any clicks but I assume the videos audio was dubbed over that and if he says it’s firm that’s more revealing than watching a video and pretending to know how much force he is using.

[@EMtesla1]

Well if you don’t believe me then you better try it out for yourself.

[@PhilT993]

When sitting directly behind the steering wheel, with the screen swivelled all the way towards the driver, does the steering wheel block any of the left side of the screen, from the driver's point of view. In the video, we only see the screen from the centre of the car. Thanks.

[@EMtesla1]

The screen will turn all the way to dash board to accommodate all drivers depending how tall they are. The screen can be set to various angels without it falling out of place while driving, there for not being behind the wheel. Hope this helps !

[@knight2386]

Great tutorial! Are there detents in the hinge that click the screen in to place for each setting (facing driver, centered, facing passenger)?

[@EMtesla1]

Thank you! Also please see my update video on this… kzbin.info/www/bejne/jne6nYmDedqCrM0

[@johnnynguyen8520]

does this make the screen lower or is it in the same exact position?

[@EMtesla1]

slightly lower.

[@lionellhwang5153]

Need to buy a Tesla just to try this out!

[@joystickadamchircop7278]

Do have to shut the screen down before stripping down.

[@EMtesla1]

It's not required but you can certainly do it.

[@HeinzWilhelmGuderian]

now this is awesome. more diy kit is needed

[@JohnMeissen]

The title says "Screen Swivel Tilt", but the video and the link are for a product that only swivels. It doesn't tilt.

[@Ratniko]

it looks so cool, but i would def break those plastic clips off when trying to install this

[@frodedahl3494]

Is this the same as @techforum invented a couple of years ago?

[@mitchellbarnow1709]

This design is much better, in my opinion. It’s the same idea, but a much different execution.

[@MrCarCrazy]

Stolen IP.

[@fcbarkor]

Can not You change angle vertically?

[@EMtesla1]

No just horizontally … turn left and right

[@ThatGuyBW]

So it does interfere with the phone door fully opening (2018 Model 3). The door opens enough to be out of the way but it's clearly not fully open and will be a rattle nuisance when driving. It's not enough for me to uninstall I'll just throw some felt on the bottom of the bracket that touches the open door. But just FYI...

[@EMtesla1]

Correct, the door with not fully open which I do not have a problem with as I leave it open 95% of the time anyways. As far as rattling, I hear nothing when driving, maybe because I have a wrap on the lid?

[@lakeatman504]

Do you know if that’s going to mess up your warranty ? I really wanted it but I am scared 😱

[@EMtesla1]

This is what I found on tesla's instruction manual page 176 and this is for (ALL Accessories not just a screen mount)... WARNING: Installing non-approved parts and accessories, or performing non-approved modifications, can affect the performance of Model 3 and the safety of its occupants. Any damage caused by using or installing non-approved parts, or by performing non-approved modifications, is not covered by the warranty. WARNING: Tesla does not accept liability for death, personal injury or damage that occurs if you use or install non-approved accessories or make non-approved modifications.

[@lakeatman504]

@@EMtesla1 thanks 🙂

[@JPatel1995]

Tesla can say whatever they want about what voids their warranties but the Supreme Court magnuson moss act is the law and that says Tesla would have to prove that the modification done caused the damage so if your screen just stops working Tesla would have to prove that the installing of it or the mount itself was directly responsible for the screen not working. Which they couldn’t unless somehow it really was the cause. They can’t just say because you changed your screen mount the screens warranty is voided. www.edmunds.com/auto-warranty/what-voids-your-vehicles-warranty.html

[@lakeatman504]

@@JPatel1995 thanks

[@RyanHaury]

So are they saying that if we damage it ourselves during install it's not covered, but if it breaks on its own unrelated to our install they will fix it under warranty?

[@phamtienquang3804]

I have only one problem with the tesla. Now it is solved.

[@karendonahue65]

What is the brand of the swivel mount and how much!

[@EMtesla1]

its right here amzn.to/3iegDac

[@OptimisticPrime2357]

Where did you get that carbon fiber dashboard wrap/cover? It looks really good!

[@EMtesla1]

right here bit.ly/3PgybjZ (Coupon Code "EVAN") SAVE Money 💰

[@Jeonkwang]

very useful video!!

[@Justbekaws]

Installed my mount with no problem, but now when i drive i get a plastic rattle sound. Im assuming its the face plate behind the mount as it does not “fully” clip in to the dash. Any tips so i don’t go insane?

[@EMtesla1]

I never hear a rattle sound on mine maybe you could apply some felt tape to the clips?

[@Simp1eTrading]

Great video and great channel!

[@glynn36]

Does this bracket tilt up and down as well ??

[@EMtesla1]

on the second version yes...

[@glynn36]

@@EMtesla1 excellent i have just bought one, it came today so it should be the second version. Just about to fit it !! Wish me luck 🍀

[@glynn36]

Ok. So its all fitted, a few snags. 1 it came with all tools included 👍🏻but instead of a 10mm torque bit they give you a spanner 🔧 which is of no use as it is to tight to get to the bolts/screws. 2 The plastic lever is very cheaply made and bends when inserted to remove the very first panel. 3. After installation it all looks good but when screen is tilted all the way to driver it hits the back cover and pulls the cover up slightly. 4. The stage where you remove the temp sensor, on the 2022 model you don’t need to remove the sensor but undo the two screws which is a lot easier and then screw onto the new temp cover. Im happy with the look and will see how i get on with the new position of the screen. The good thing is if you are not happy you can easily put the original back in place. Great video i would not have attempted this without your clear step by step instructions. 👍🏻👍🏻

[@jeffbransky7966]

I noticed bracket was rotated effortlessly to install one of the mounting screws. I bought a bracket kit but I have a big problem so I have not attempted to install it. I think the swivel on mine is so tight I may over stress the screen and damage it when the screen is swiveled in use. There is no way I can swivel my bracket by hand because it is extremely tight so I think it’s defective. What do you think? BTW excellent installation video. Very easy to follow.

[@EMtesla1]

I can assure you that once you install the screen onto the mount it will rotate just fine. Turning the bracket with your bare hands will be surely difficult to do.

[@jeffbransky7966]

@@EMtesla1 How about impossible to do even with gloves on? The one I received was like that. In the videos they easily rotate the bracket to install hex screws. Not possible with the one I sent back. I have watched 4 different installation videos to arrive at this claim.

[@EMtesla1]

Hmm… hopefully you got a working one now.

[@bpltakefive7885]

Great video, does this installation invalidate the warranty in anyway?

[@jamessieracki6579]

Does the phone charger door still fully open and clear the screen? (Only a potential issue prior to the 2021 center console refresh...but that's what I've got and I'm curious)

[@EMtesla1]

I have an update video on this under my channel if you can check it out quick. Thanks!

[@tamasdebreczeni5335]

What about the warranty off the car ?

[@ricric9521]

There's a new 360deg 4-way adjustable mount.

[@EMtesla1]

Yes... I just made a video on this. Please see it under my channel.

[@kevinmoore6070]

Rattles on bumps. Noisy. Don't know how to fix it.

[@EMtesla1]

Please make sure the mount is very secure on the bracket when tightening the screws.

[@seadsainoski2515]

Thx for this video I am going to put on my TM3 today. How long did you made it in ?

[@EMtesla1]

About 20 mins to 45 mins

[@mpomerlo]

Does the screen is lower than the original?

[@EMtesla1]

It sits slightly lower, yes

[@vanly2552]

Thanks for the clear step-by-step instruction, and excellent video. Do you need to turn off car power before doing the install?

[@EMtesla1]

Thanks! And just put the car in screen clean mode and you’ll be good.

[@pnwroamers]

The best guide I've seen. I own an elantra though.

[@awesomeforever758]

Super awesome im buying one

[@glynn36]

The only problem i see with this is if the screen 📺 fails and needs replacing. Tesla could refuse to fix/replace because you have tampered with the electric cables voiding the warranty.

[@EMtesla1]

There is no reason the screen would fail unless you drop it during installation.

[@robertorichards]

sorry if answered... does it fit model 3 2021? thanks

[@EMtesla1]

Yes it does

[@utrimque]

Does this work for the model 3 2022??

[@EMtesla1]

Yes, thank you

[@utrimque]

@@EMtesla1 temperature control is different on 2022 models. They’re bolted down to the plastic housing.

[@utrimque]

Also you need to let people know that they may need to do a hard reset on their screen to get it to boot back up. (Hold the scroll buttons down till the screen comes back up once you plug it back)

[@SimuLinksGolf]

if you have one of those phone holders that go over the top of the screen, do you think your phone will hit the dash?

[@EMtesla1]

It will not hit the dash... no

[@aidanaktouf5933]

Hi! Great video, thanks for sharing! Is there a specific way you had to hold the monitor while pushing it back in or anything? Mine is super wobbly vertically, I've tried taking it out and redoing it and it just seems like the bolts are grabbing the bracket to hold it in place, but aren't grabbing anything above that and therefore aren't anchored vertically. The screen wobbles about 20 degrees up and down and is super loose. It's pretty tight horizontally. Thanks!

[@EMtesla1]

Did you put in the 2 screws below the screen after you attach it to the mount? Also use a wrench that you can really tork down on.

[@henzsy1404]

Cool video 😜 Could you advise where we can buy and how much is one set ? Thanks 🙏

[@EMtesla1]

The links are in the description to purchase this. Thank you