The Best Way to Power your Bass Shakers!

MORE INFORMATION:
www.parts-express.com/promo/da...
www.parts-express.com/--300-785
The Dayton Audio BSA-200 high power bass shaker amplifier is designed and built specifically to power tactile transducers but works equally as well as a dedicated subwoofer amplifier. Its small form factor makes it perfect for tight spaces, while the included brackets allow for vertical or horizontal mounting. The frequency and balance knobs let you dial in the desired crossover point and output, giving you total control over your set-up.
The Dayton Audio BSA-200 is rated at 110 watts RMS per channel into 2 ohms. In bridged mono mode, both amplifier channels are combined for high-power monaural output. The amplifier is rated at 230 watts RMS into a single 4 ohm load when bridged.
Manual and automatic on/off modes allow easy integration into automated systems and saves power when not in use. 5V USB power output is designed for use with the Dayton Audio Wave-Link wireless system (not included). The Wave-Link system can link up to 5 receivers per transmitter giving you ultimate flexibility with remote mounting options.
SOCIAL MEDIA:
Follow us on-
Twitter:
/ parts_express
Facebook:
/ parts.express
Instagram:
/ parts_express
Subscribe:
kzbin.info...

[@tatsumaru12345]

If you've never tried them...bass shakers are a must for headphone users! Super neat for home theater though.. My aura bass shaker was smoking during fury road, because i had 300w rms going to it xD

[@310shadow310]

Would it be possible to use these two items along with a smart phone for sound? I need something to help me feel the vibrations of relaxing music as i sleep. I have anxiety and ptsd and having relaxing sounds helps me but its the vibrations from those sounds that i really need.

[@bassblaster505]

would make a good subwoofer amp. but of course i want to know whats inside of it.

[@MrSuperman258401]

Nice, this comes up so much in my HT group

[@liquidshadow95]

How do I send a flat subwoofer signal after running audyssey? I have a Denon X3300W and two subs using each of the LFE channels. I assume I need to send the shakers an uneq'd signal but i dont know how given my setup. All 7 channels of speaker outputs are being used as well. Thanks in advance.

[@allysonprincess]

I have an old QSC RMX 2450 amplifier, I have been wanting to use it for a bass shaker to enhance my immersion. Question is though will my amplifier be sufficient.

[@kilgoretrout4461]

Yes.

[@kilgoretrout4461]

Also, you might blow the shit out of them depending on what you have. Most require pretty low wattage.

[@VicBeatz]

Is it possible to hook up my TV audio to this and my soundbar as well?

[@PartsExpressOfficial]

If both have proper outputs needed, yes it would work.

[@chrisjohnson261]

How many bass shakers can I connect this too at 1 time? Need to know if I require just one or 2 of these.

[@PartsExpressOfficial]

It was built to power 4, but here is the power output readings: Output power: 110 watts RMS per channel @ 2 ohms, 230 watts RMS @ 4 ohms ( minimum impedance) bridged mono

[@emmanuellafrance538]

@@PartsExpressOfficial If i plug 2 BST-1 on it pluggin at 110W should it work because right now nothing is happening on the BST-1

[@PartsExpressOfficial]

@@emmanuellafrance538 reach out to our techs to get an answer on this type of question. To get technical information about our products: Email: [e-mail] Phone: [phone] Hours 8am-6pm M-F EST / Closed Sat & Sun

[@thedude4795]

@@PartsExpressOfficial 230 watts RMS divided with 4 (speakers), am i understanding that correct?

[@bassturd792]

Why is there a wired remote in 2018?

[@Googaliemoogalie]

if it were wireless or bluetooth it would probably introduce noise in LFE. if it were an IR remote for people using bass shakers, they'd have the unit probably behind them or under a couch. so Yea wire remote seems sensible

[@asyouwish9567]

Why the hell do you need four aurasounds on a single seat. That's not even going to be pleasurable.

[@blakecutrell9907]

massage chair?

[@asyouwish9567]

@@blakecutrell9907 LOL good one.

[@emailatomic]

It makes me question the quality of the amp that you are mounting four bass shakers to a single seat. That's ridiculous. It just means you believe in overkill without practical benefit. You couldn't have talked me out of this amp in a worse way.

[@mafosa8519]

This is “good stuff” here!... I have there amp plate. Works great! Ugly as hell though! Larry

[@PartsExpressOfficial]

thank you!

[@jfleckp]

"Watch this video here" and arrow points to nothing

[@sphincterSplasher]

50 hz? It needs to be 5 hz.

[@seansmith4440]

50? What's the point then? All the good bass is under 50hz. Buttkicker FTW at 7hz

[@DanB0yD]

This is the low pass...