The Charlie Show /// Episode 249 /// XR10 Pro G2S tuning

[@smalleaglefpv3186]

Thank you for the explanations of all the features. My question is, if you have 40deg timing on the endbell, what should your electronic timing be? Turbo for instance. I guess you would set it at a number, run the car and check your motor temp and then adjust from there?

[@bobbymalta73]

Thank You..

[@timlong856]

Always good info thanks buddy..

[@lawton70]

Does the new esc and firmware fix the double tap reverse bug? The G2 has a bug in the forward brake reverse where if you double tap brake the esc goes immediately into reverse no matter how fast you are going forward. The instructions say the motor must be stopped but you can be going full speed and it will switch to reverse!!!

[@lawton70]

@HOBBYWING Official, any update on this question?

[@wareagleriver7980]

Hello. I have the XR10 Pro Elite G2 ESC. Also have the LED program card. It doesn’t seem to work with this ESC. Only get some red dashes on the display. Do I need the LCD program card instead, or is there a way to use the LED card with this ESC?

[@edgarortiz2743]

I have this problem too!

[@Jut77]

Can u explain the drag brake auto please

[@psychozeros]

Hi. I just got XR10 Pro Elite G2 ESC. Do I still need this Non-Polarity Capacitors (NPC)? What is the impact if I use or not using it?

[@ezveedub238]

Non Polarity caps are not needed, they only offer reverse connection protection where standard caps will blow. I find the one non polarity cap I have tested lower than its rated capacity, so I stick to normal polarity caps for now.

[@StickyGeko]

Are the settings the same on the card as it is via the dongle?

[@petoneves]

Can I run a sensor less motor with this esc and use turbo settings? Thanks

[@HOBBYWINGOfficial]

Sensorless works but you won't get Timing Tuning.

[@YoungBeckham16]

Can you run 3s ??? Just got one and it blinks and doesn’t run motor on 3s… 2s works fine

[@RafaelFerreira-sm4dx]

Teria que ter uma tradução. Para quem é Brasileiro e não entende o inglês

[@j-rc6520]

Can this esc be used with a 2 or 4 pole brushless motor?

[@HOBBYWINGOfficial]

Yes, should work with both, but it's best to use the larger Cap Pack Module "E".

[@manuel39164]

I hope one day the bring A Drag Race tnune for the Xr10 pro

[@AntsRC]

can u program it for blinky mode??

[@Kaspurr84]

by default its in Blinky mode, no timing it will be indicated by the Blinky LED on the unit

[@eskimojoe6564]

I won the hobbywing giveaway and i never got my stuff.

[@HOBBYWINGOfficial]

Please send us an email - [e-mail] with the details of the contest you won and your contact information of course.

[@ProperSkill]

These Hobbywing systems are slow unless you use boost and turbo, then they will melt your battery terminals. Hobbywing sucks, I feel sorry for anybody who buys this crap.