The "Cheaper" Parts To LS Swap A 67-69 Camaro Or A 68-74 Nova.

In this video I show you guys the cheaper route to getting an LS engine and transmission bolted into your 67-69 Camaro or 68-74 Nova. Along with the main parts needed to get it running!
If you have any questions PLEASE watch my other videos in case those answer your questions!
SUBSCRIBE AND FOLLOW ME.
Facebook-Krusty Classics Garage
Instagram- KrustyCuda

[@fallofthezombies1379]

Nova Omega Ventura Apollo

[@bobbylittle7686]

The ict swap brackets are not Chinese. They are made in Wichita ks for anyone wanting American made product.

[@alonzofloyd8140]

Nice tips Bro, keep up the work.

[@timrios7543]

GREAT video.... lots of good information!! Keep cool brother.

[@davidlozano2344]

I want to do a 1981 el Camino is it a big difference between the Camaro with the line up on the engine and transmission? Also where would I get a drive line to fit first build

[@squarebodybuilder]

Straing at a 70 Nova and a lq4/4l80e in my driveway for a year.. Thanks for making these videos. I need to just go out and do it.

[@CutlassVibes]

Good video! Keep up the good work!

[@invisableobserver]

Made in USA by chinese employees? Even though the U.S. has stricter regulations, no one really regulates them anymore unless they could profit from it. Unfortunately the ID tags on harnesses fade quickly, at least that one has bigger fonts. Do you have any recommendations on low cost stainless headers? Just noticed I have an exhaust leak. I could use the OEM trans crossmember out of Camaro/Nova so I raise my exausts.Thank you for posting this info.

[@Kir_jbg]

Tryin to find a clean body from 1960 to 1985 and want to swap an LS. Ppl tell me it’s easy and it’s cheap but when I was doing research when I got outta high school in 2019 I found it to be expensive. I was a JDM dude by default cause of this cause I wanted something cheap an easy but now you’re giving me hope cause I don’t like Hondas like I like classics.

[@Gregorybridgewater]

Nice 1at gen Dodge! Great videos, going to do a swap soon once we find the right project and your videos show all the parts and suggestions that keep cost in check for the budget, but yet keep people from buying junk that make the swap harder.

[@EmidioHolguin]

Heck ya bro. Your videos help out a lot. Appreciate it

[@crcor2572]

Great video. Thanks.

[@nathan4658]

'Promosm' 🙏

[@stephanmatthews6494]

Hey Krusty I live in Temple and I am currently looking for a gen 3 5.3 or 6.0 LS that I need for a swap . Is there a junk yard in our area that you would recommend ? Or do you have or know of 1 for sale ?

[@krustyclassicsgarage]

I got mine from Troy's auto salvage in Troy. Pricey and you only get a long block but they come with a 3 month warranty

[@stephanmatthews6494]

Thanks for speedy reply . Great vids I will check them out. Appreciate it !

[@swartzkoft7886]

Would it be possible to swap a 2015 5.3 into a 2006 chevy silverado please let me know

[@krustyclassicsgarage]

Yes. Just going to cost a good chunk of change as that's an LT engine and the swap parts are more expensive.

[@swartzkoft7886]

@krustyclassicsgarage ok thank you for answering any chance you know where I can get the parts like wire harness

[@stevehowell4425]

Hi, great video! Thanks for the help! I'm doing my 1st 69 Camaro. Appreciate the part #s. Do you know if the speed engineering headers will work with a factory air box? The only other LS swap I've done was on a 68 C-10. I used vintage air on it, but I didn't like the fan motor noise.Thanks again!

[@krustyclassicsgarage]

They should work. Air box shouldn't effect the headers

[@stevehowell4425]

Thanks, just worried about the clearance on the passengers rear. I know the factory big blocks had a different box because they were wider than a SB. Do they clear the steering box OK?@@krustyclassicsgarage

[@krustyclassicsgarage]

@stevehowell4425 yes but I believe the big block heads were taller so I'd assume the LS heads being shorter may make up for the difference? And yes, they clear the gear box. If you watch my other videos of the swap you'll see all of it.

[@stevehowell4425]

Will do! Thanks again!!!@@krustyclassicsgarage

[@cannonballmodelshop2240]

Very good info! Have you ever swapped a ls into a sn95 mustang?

[@krustyclassicsgarage]

I have not

[@Brandon_obs_ls]

@@krustyclassicsgarageI just subscribed I have a firebird I wanna do an ls swap what harness do u recommend

[@arnw7933]

I have a 72 nova and happen to have a 5.3 vortec iorn block aluminum heads in the garage my brother gave to me for free . Im about to pull the trigger and do this swap. My stock rear end has a block in it making it fully locked witch is dreadful to drive . Any suggestions on witch new rear end i should get .

[@krustyclassicsgarage]

All dependent on what you want to do with the car

[@arnw7933]

@@krustyclassicsgarage daily driver with some pep in the step

[@krustyclassicsgarage]

@@arnw7933 I'd get a legit rear end shop to swap in a set of 3:73s with a locker of some sort or just a basic posi set up. Or maybe 3:55 to keep the rpms slightly lower for a driver. But 3:73 will give you the pep while keeping the rpms somewhat lower.

[@boogiehound]

Use the 8.5" ten bolt housing you have now. Swap out the 28 spline carrier for a 30 spline posi or locker. Aftermarket 30 spine axles and gear ratio of your choice. If you are mostly driving on the street I would go with something in a 3 area. 3.08 - 3.73.

[@ChrisDavis-ng1xv]

What’s up my man thats gonna be really nice cause you do good work also I have a question trying to figure out how to wire my fans in with the extra wires that are loose on the Amazon wiring harness so I can run them through ECU can you help me I lost my instructions that came with the harness I remember you used the same wiring harness yo you used and one of your videos it’s the one that has the extra plugs on the driver side of the vehicle

[@krustyclassicsgarage]

I will have to look

[@ChrisDavis-ng1xv]

@@krustyclassicsgarage ok thank you

[@Brandon_obs_ls]

@@krustyclassicsgaragewhat oil pan is that how much it cost u have a link

[@MOE13576]

This dude reminds me of Mac Miller. 😂(no hate)

[@krustyclassicsgarage]

I've been told I look like him quite a few times. But Aaron Rodgers, from what I've been told 1000 times is my twin, lol

[@MOE13576]

@@krustyclassicsgarage I can see that. Hahaha. I've been watching your obs videos. Hopefully you do another one soon. Subscribed !

[@wadebonhomme2142]

Once again very helpful going through the parts being used before starting the install 👍