*THE DEMON 2.0* How to Build an Electric Skateboard 38MPH - 30 Miles Range - 7,000W

OUR NEW KIT: propulsionboards.com/products...
The cost of this Board is:
Street: $1999.99
All Terrain: Street: $1999.99
Street + All Terrain: $2,199.99
HERE IS THE NEW PROGRAMMING VIDEO: • How to Program the Dem...
- Here is our website: electric-skateboard-parts.mys...
- You can buy a Kit that has all the parts to make one here:
electric-skateboard-parts.mys...
- You can buy this as a complete board here:
electric-skateboard-parts.mys...
- You can find the Complete Mechanical Kit here:
electric-skateboard-parts.mys...
You can find our All Terrain Kit here:
electric-skateboard-parts.mys...
- Check out our parts list to our boards: electric-skateboard-parts.mys...
Support us: / diyesk8builders
- Follow our Instagram @diyesk8builders
- Follow our Newsletter: eepurl.com/hcO2Hb
0:00 Riding Footage
0:48 Introduction
1:35 Drive Train Assembly
9:25 Deck-Enclosure Assembly
13:06 Electronics
18:28 VESC Programming (OLD)
21:50 Finished Product
22:36 Conclusion

[@elpabloncho]

# Drive Train 1:36 Motor mounts 1:54 Motors 4:43 Motor pulley 5:20 Belt 5:27 Wheel pulley 5:50 Wheels 6:15 Bearings # Deck and Enclosure 9:32 Deck 9:56 Enclosure 11:17 Grip tape # Electronics 13:14 ESC 13:46 TX/RX 14:19 Battery

[@NeedWeedJiLLpiLLz]

hi , can i use the Flipsky VX2 Pro Remote on Enertion Raptor 2 ?

[@Gargamel0086]

I've checked out all kinds of eskate content but this is the first time that I got seriously hyped for an eskate, as an experienced skater who rides a drop-trough this looks like it rides like a real 'normal' drop-through longboard.

[@AbosoluteAltitudes]

I feel like a drop of thread lock on most bolts would prevent a lot of headaches later on. I build and fly a lot of drones and RC planes, no thread lock and it’s guaranteed to have parts vibrate loose. I’ve been thinking about ordering a kit to build my own. I’m a big DIYer and this looks like a ton of fun. I’ve fixed up a few lift boards and other lower quality brands for other people. Fun to ride but would like longer ride and higher top speed than the ones I’ve worked on.

[@josephfloreal9782]

Very nice Board Love what you guys do👍👍

[@grady92]

I can't wait to buy the entire kit

[@diegoortiz1911]

Don't all the custom parts makes it to where you have to buy any and everything from him. So the means if something breaks or messes up you cant go to a board shop or any other seller. I mean the wheels, battery, and remote don't and more even come with the kit

[@grady92]

No u can get parts from where ever you want there interchangeable u can buy all the parts from somewhere else if u wanted

[@dontdowhatido6503]

My skateboard is the same setup but different deck and trucks. Have my motor settings at 100amps and battery at 120amps. I can push thos amps because I use 6000mah 12s lipos 60c

[@kraeber5610]

I may have to buy those belt motors those things look crazy

[@DIYesk8Builders]

Yeah they are pretty awesome!

[@kracksmith4ejm1]

i like this how long is the bamboo board from top to bottom

[@coryroute5942]

Can I ask why you used double kingpin trucks instead of reverse kingpin trucks? You would get a lot more stability out of RKPs and you can tune the bushings to the way you want it to ride much easier.

[@DIYesk8Builders]

Very true and valid points. We just like the feeling of the dkp's!

[@robbiesharp311]

Turning bro but the wobble factor.

[@hello22361]

What is the height of the enclosure above ground?

[@benwhite7005]

how fat are you?

[@beozzie690]

Awesome board... can’t believe the price for the kit versus the completed one.. just mad

[@0rig1n54]

Dude this is hella awesome but also way too expensive for me

[@MUCKFOOT⁶⁶⁶]

get a job

[@Zentao420]

@@MUCKFOOT⁶⁶⁶ people got bills and kids man. This is an expensive fucking hobby.

[@Zentao420]

Check out the possway T3. 499+ shipping. I am not affiliated with them, but I'm always trying to keep up with the best wallet friendly boards 👍

[@Brennen_Nisporic]

Premium power premium price. Well worth the diy

[@Jason-TheChad-Muska_circa1995]

@@Zentao420 That is true especially in Joe Biden's economy. I went from being able to purchase a $5000 Bajaboard to the present Where I am struggling to even build my own budget board for like $1,500. Then there's the fact that I've lost about 40-50% of my 401k and then about 60 to 70% of all of my crypto investments. But of course 60-100 million Americans have a mental condition known as "TDS" which if you're not familiar is called "Trump Derangement Syndrome". Oh and I'm not being hyperbolic, It is actually a real disorder and I actually used to suffer from it as well. But sadly these types of people cannot put their ego and pride aside and admit that they screwed up and made the wrong choice. So now you have hundreds of millions of people that now have to suffer the ramifications of The actions of a large group of buffoons. Oh and those ramifications are felt not just domestically but globally as well. You can say what you want about the previous president and that's fine. However a year and a half ago we didn't have Russia invading Ukraine and we weren't in a proxy war with Russia via Ukraine and NATO to fight our battles. Oh and we certainly didn't have China encircling Taiwan and So far within the last 10 days have flown over 30 fighter jets over top of their defensive airspace nor did we see China firing live rounds right off of the coast of their island. Sadly all of the idiots who voted for this buffoon who's currently in office will do so again because they're mindless cult members who are brainwashed by propaganda and know absolutely nothing about government, economics or the entire history of the political parties involved. Hell it goes even beyond that. They really have no knowledge of really anything That matters. But hey they can tell you their favorite rapper and all of the names of the Kardashians. So as I said previously, you now have millions upon millions of people who have to suffer hardship as a result we can do nothing to help or stop the fact that we are staring down the barrel of world war 3 as well as the collapse of our own country as well. Oh and all so that we didn't have to listen to the orange man put out any divisive tweets anymore that were mean and hurt So many people's feelings. Get your ass out and vote in November. Owen whatever you do don't f****** vote Democrat. I did so for about 22-23 years. November 2021 in Virginia was the first time I voted Republican and I will never vote Democrat again. I think it's time that we pass a law where individuals can only vote in this country if they're able to place within a certain parameter of an IQ test.

[@kevinhorstmann1435]

Now one with two motor in the front and two in the back... that could climb some serious hills...

[@DIYesk8Builders]

Would have some serious torque, but the range would suffer quite a bit

[@davidlchirino]

This is the one (Hub motors): www.meepoboard.com/collections/electric-skateboards/products/awd-pro

[@brandonbennett9128]

Can you please do a review on the battery?I purchased one from you but my diy board is still in the process of being made, So I have yet to test it. How is it compared to a 12 S3P 18650 and a 12s4 P 18650 pack? Thanks.

[@chrisd6381]

It's pretty easy to look up the specs on the cells and compare watt hours and totall wattage output. Do a side by side w Samsung 30q's and 40t's and you'll get the info you need (keeping in mind a 4p and 3p configuration respectively).

[@twanskys]

you should have the male connector on the battery, its less likely to short

[@milkman3107]

I LOVE THIS

[@khaliltheking]

Hi did you guys have experience sending full board kit to Europe? I like your offering but feel the shipping price 200$, possible delays and risk of paying 20% VAT too much to take.

[@DIYesk8Builders]

We are sending our first boards and kits to Europe later this week. It definitely makes everything quite a bit more expensive shipping it all that way.

[@khaliltheking]

@@DIYesk8Builders ok I'll contact you guys in 3 weeks time to have a update of what to expect.

[@DIYesk8Builders]

sounds good!

[@garogercade7850]

Really great video! Thanks!

[@casobank]

I’m going to build this kit with these changes: Hi5ber Undertaker Deck: $275 Abec 11 BigZigs HD: $65 Bones Swiss Ceramics: $165 Eovan 12S4P Battery: $569 My hopes with these changes is that I can achieve an even higher stable amp output for higher speeds and increased range with the batteries 48000mah capacity. Increased efficiency is seen with the Bones Swiss bearings to extend rolling distance and rotational resistance. This efficiency and range is also increased through the lightweight carbon fiber deck by Hi5ber. The wheels are just personal preference. The price increases to around $2300 to build after taxes and shipping including and other small bits to get the build together. Please let me know if you see and flaws in my logic or part choices! :)

[@DIYesk8Builders]

I would not get those wheels as they do not have any spokes. You will need some wheels with spokes. The smallest that I would use are 83mm. Something to note about the Eovan pack is that while it has fantastic range, the current output is not that high compared to some other packs, meaning you will not get quite as much power. Otherwise, looks like a great plan!

[@MyWorldAsDylan]

Great build 🔥🤙

[@malereyes7695]

Great video! I gotta ask though... Why the DKP trucks? Aren’t they unstable at higher speeds? Full disclosure I’ve never ridden them. Is there an option for non DKP? Regardless the board looks stellar.

[@DIYesk8Builders]

Thank you, yes so I definitely feel that people make the speed wobbles on dkp's out to be a lot worse than they actually are. While they are not as stable as other options, they still handle high speeds just fine in my opinon. Definitely a valid point though!

[@acekeianar]

Well, looks like I've got a new project. EDIT: I gotta ask, how does the BKB Duo stack up? EDIT 2: For the enclosure... After the wires are snug, couldn't you flex seal or plasti-dip a seal? Just for some sort of water proofing?

[@6-carboxydetrahydropterin-485]

BKB Duo has absolutely NO competition. Demon 2.0 makes it look like a complete joke in terms of power, acceleration, torque, and speed. Mine arrived a few days ago and it’s just so powerful and perfect. Far more superior than my Verreal RS & friends Evolve GTR

[@DIYesk8Builders]

Personally I have never tried it. The duo looks like an incredible board too, but the demon has larger motors and bigger battery. Both boards will also have a different feel as we use dip and they have single kingpin.

[@acekeianar]

@@6-carboxydetrahydropterin-485 thanks bro. I'm looking for a new board and 30 miles of range seems too good to be true. Also, this 2.0 just looks sexy as all hell.

[@acekeianar]

@@DIYesk8Builders Thanks for the Video, I know what I'm getting for Christmas :D

[@lucesniper343]

Got a couple of questions. Can the Boardnamics motor mount work with the standard DKP 3 hole mount? I know this is a longshot but is also possible to mount the motors facing forward with DKP trucks. I know the middle kingpin would be in the way and the motor mounts that come with DKPs hole alignments most likely don't work but I'm way too into hiding my motors under my deck. I think it would work with some longer motor mounts to possible extend ahead of the middle kingpin.

[@DIYesk8Builders]

Hi, not sure about the boardnamics mount - I have seen that somewhere though. Also not sure about the inward mounting as we have never done that. I think there is a place that might called Janaux but I'm not sure

[@pikachu_3311]

The board is absolutely incredible I love it but my only complaint is I can see the screws through the grip tape and there is a clicking noise wich is really annoying when riding...😟

[@pikachu_3311]

@Nicholas Cooke I went through everything and I just can't figure out what it is...

[@jackmaley8]

What has the range been like for you

[@pikachu_3311]

@@jackmaley8 I usually get between 25 and 27 miles

[@jackmaley8]

@@pikachu_3311 that's great. Did you figure out the clicking noise?

[@pikachu_3311]

@@jackmaley8 nope

[@markhouck5258]

Thank You! 😊

[@caramelhuman7300]

Lmao when I read the stupid comments I cringe so hard 😂 "no way it goes past 30mph" or "fake" lmao sometimes I forget people are real life stupid when it comes to anything tech related

[@Jcslim138]

I have a question, I have a exway pro does 29mph but I can only get about 11-15 miles while having fun. Can I buy one of these enclosures and add the battery pack in parallel to the stock one ? So it’ll double my range or more ?

[@DIYesk8Builders]

That would probably be a pretty difficult mod

[@Jcslim138]

@@DIYesk8Builders that’s what I was guessing. Might need to just make a DIY from one of your builds, being 220lbs kills my battery’s.

[@DIYesk8Builders]

I would totally recommend it

[@jeremyfagergren]

just used your website. It's cheaper to buy the individual parts for the AT build than buying the "complete" kit for the AT. Maybe review your site and prices?

[@DIYesk8Builders]

I just did the calculations and it costs $1803.93 to buy all the parts separately and the kit costs $1699.99... and that excludes the wheel pulleys and belts...

[@tnecvol75]

@@DIYesk8Builders Even if buying separately were cheaper, I’d pay a premium for the work you have already done to simplify the project. Thanks for the research and great video!

[@TacEsk8]

Fire dude, awesome video

[@DIYesk8Builders]

Glad you enjoyed!

[@TacEsk8]

@@DIYesk8Builders ill try to follow along this build over the winter. You guys are awesome, keep up the great work. Ever thought about doing scooters?

[@DIYesk8Builders]

Thank you! We have not but we have been working on a electric mini bike and DIY OW

[@TacEsk8]

@@DIYesk8Builders thats really nice

[@ar9maker]

Focbox Unity has push to start mode. Is that usable in this board?

[@DIYesk8Builders]

We currently do not use it, but theoretically yes

[@chrisd6381]

Absolutely is but you would want to throw a loop key in there as a safety precaution.

[@speedmonkeyadams8985]

I have a build but I want the 7 inch wheels with the small wheel pulley!! Have any ideas? I planned on just getting some 3d printed?

[@elis.1522]

i don’t think he’ll say anything to help you make your own... he wants that revenue from the $2k board

[@davidmiller4758]

I wonder if that enclosure will fit the bkn duo type r 12s5p battery.

[@DIYesk8Builders]

I think that battery is too thick for our board unfortunately

[@zpepe]

Beautiful eboard guys. Any chance we can hear the loudness of it on the street?

[@DIYesk8Builders]

Yes it will be in the update video!

[@Mr-E.]

@@DIYesk8Builders I second zpepe on requesting the sound of the motors while riding, would appreciate it!

[@Ndrewcow]

Hey sorry to take time out of your day ik you're super busy I was just wondering I want to buy a lycaon gr battery to replace the battery on my Wowgo 2s. The specs for the lycaon battery are 18650 cells in 10S3P 36V 7.5Ah 270Wh and for the wowgo which I want to replace are 36V 10S2P. I want the range of the lycaon battery to upgrade my current board and was wondering if using the lycaon battery which is more powerful (about 15 km more range) will fry my esc, motors or anything and was wondering if the battery is compatible. If you do take time to respond thank you so much and if not thanks anyways love the vids, got a new sub!

[@aleksvan5035]

As long as they're the same voltage battery, it'll be fine. So yes it'll be ok to do the battery swap

[@WorldwideDarts]

What a beast!!

[@innismendoza]

😈❤️ Much love/ Support guys can't wait to build me one. Please stay safe guys :)

[@MILLERS066]

With a deck this low do you find the enclosure scraping on turns?

[@DIYesk8Builders]

Never had this as an issue

[@milkman3107]

am i able to switch the wheels with off road wheels?

[@DIYesk8Builders]

Yes, it's super easy - takes around 10 minutes

[@jacobboone568]

when ive tried to setup my flipsky 4.20 vesc the acceleration and brakes are just too powerful, would that be in the amp setting for motors? Also for some reason with the hall sensors plugged into the vesc only one motor is running sensored and the other isnt which causes one wheel to spin and the sensorless one to just stutter unless i push it forward then it spins normally, do you know why it wont run sensored? Last thing, when i hold a speed at like 10mph the boards keeps on accelerating even though im not pushing the throttle any higher?

[@yourmom8739]

U must make the vsec know that the trigger is a speed set not an accelerator. And accelerator will continue to accelerate.

[@jamesanderson-cj1qy]

Could i be able to use all terrain wheels for this kind of project?

[@DIYesk8Builders]

Yes absolutely!

[@ericsoto1891]

I am building a board. Would you recommend using double kingpin trucks with using such big motors? I've been told to use regular trucks. Your opinion?

[@DIYesk8Builders]

Either one works great! We like the dip because they make it easier to serve but they are not as stable at high speeds

[@henryvrugteveen1960]

are the pulley covers not useless now? they only cover the belt part that is the tightest so it wont really protect from debree getting in

[@DIYesk8Builders]

The reason that this is done is to allow for one set of belt covers to work for street and AT. It is not ideal on street, but works great for AT, where debris are most likely to get in

[@theviralvideos3563]

So cool👍😎

[@moblin625]

Is their any way to add a waterborne surf adapter to this board build?

[@NightKidBrandon]

It has double king pins already for maximum carve lol

[@piersonbrice4674]

Awesome video! What changed your guys mind on using the focbox unity over the flipsky dual 6.6 plus?

[@DIYesk8Builders]

We thought that it would be a better option for this build because of its reliability and the stuff that it comes with like the built in bluetooth module

[@gccasareno23]

Hello, I'm planning to purchase the focbox from you guys. Did you say it has 4mm connectors? Because I've read somewhere it says 3mm?

[@DIYesk8Builders]

It had mt60 connectors

[@TheLozzm]

Impressive build 👌. With VX2 remote how does it choose 3 speed modes and what are they on your build ?can these be programmed custom or come standard

[@DIYesk8Builders]

It comes standard and all it does is change the acceleration of the board off the line.

[@ronreede9402]

looking at the parts list I don't see a charger. Is one included or available?

[@DIYesk8Builders]

Yes there is a charger included

[@ronreede9402]

@@DIYesk8Builders ordered my kit

[@piersonbrice4674]

Did you guys use the 12s3p 40T pack from chibatterysystems? I have a 12s9p 40T from them, and it Sags a lot for some reason. I contacted them and they said that would be normal. I thought that would not be the case because of the 40T cells.

[@DIYesk8Builders]

Ours is made by another manufacturer. 40T cell really should not have too much sag though

[@enjoyesk8978]

It shouldn’t sag. They probably didn’t use enough wire or nickel strip for series connections.

[@piersonbrice4674]

@@enjoyesk8978 That could be the case. Here is a quick video of my battery showing some strips. instagram.com/p/CFzwAjQpjB_/ It looks like they but a lot on. Could it maybe be a programming issue in vesc tool?

[@enjoyesk8978]

@@piersonbrice4674 yes absolutely

[@enjoyesk8978]

@@piersonbrice4674 what are you using for a vesc?

[@Brennen_Nisporic]

I’m planning on doing a very similar build to this one using a similar deck. The trucks I will be using are the caliber 2.0 trucks and I’m curious what the largest size motors I can fit on there without them touching. I’m planning on doing dual 6355 motors because I’m pretty confident I’ll be able to fit those no problem. I’ve never built a belt drive board before so I’m happy to take some advice. I’m a 180 lbs rider and there aren’t hills where I live but I would still like to be able to climb hills when I take the board out of town.

[@DIYesk8Builders]

Dual 6355 on standard caliber trucks will fit with a 12 mm belt setup, but it very very tight on 15mm - maybe won't even fit.

[@Brennen_Nisporic]

Okay good to know. The pulley and belt kit I was looking is a 15mm belt

[@DIYesk8Builders]

you could also use extended caliber truck clones if you want more hangar space. But yeah, 12mm is the way to go w/ dual 6355. I think 15mm is possible, but it very VERY tight

[@Brennen_Nisporic]

I ended up using flipsky double kingpin trucks. I think I’m more a fan of the single kingpin trucks so I might switch them out. Any recommendations for single kingpin trucks and any deck recommendations?

[@noahclauss205]

its hard to tell but the part by the water looks like portland is that correct

[@DIYesk8Builders]

Yes!

[@labeebahmad1807]

For long range and good speed is hub motor good or belt motors ? ( beginners in e board)

[@DIYesk8Builders]

They are both really good but for hubs you can get stuck with a limited choice of wheel where as the belt you can have virtually any wheel option

[@krishnansrinivasan830]

Nice & Thanks Sir :) Do you ship to India ?

[@DIYesk8Builders]

Unfortunately we do not ship complete board or batteries to India. We can ship parts though!

[@krishnansrinivasan830]

@@DIYesk8Builders Thank you so much :)

[@nameno544]

Damn now I have to find a full face helmet

[@DIYesk8Builders]

lol kzbin.info/www/bejne/jWalXmdrbL5rpbs

[@nameno544]

@@DIYesk8Builders kzbin.info/www/bejne/iWqTZ5adiamGgK8

[@DIYesk8Builders]

wow thats terrible

[@jimkazmer951]

How do you charge the battery? The charging plug was left inside the enclosure. Do you have to open the enclosure to charge the battery?

[@DIYesk8Builders]

No the charge port threads through the hole in the enclosure and comes out on the outside. It's charged just like any other esk8, just plug in the DC charger and you're good to go

[@thadschrader8218]

Want to build a 45 mph 20 to 30 mile board can you help me

[@DIYesk8Builders]

Hi, email us at [e-mail]!

[@apriljoymagistrado131]

where to buy the foc box unity esc?

[@DIYesk8Builders]

I would not recommend buying it now. They have lost their quality

[@Devdidthat]

I get that you DIY but what's the point if it's that expensive! Anybody can buy a meepo nls pro(650$ us)factory warranty liability 35 mph top speed hub motor though not hating just trying to understand!

[@DIYesk8Builders]

Yeah totally understand! So our board it has a top speed of 38 mph, however we have had some customers tell us that they have gotten to 41 mph. The meepo nls pro only gets 29 mph top speed and 20 miles of range. Our board gets around 30 miles of range. I also would think that the ride feel would be better on ours because of the bigger wheels and that the meepo nls pro has hubs, but we have never ridden one so thats just my thoughts. Also torque is a big thing, but I don't know how quick the meepo nls pro is but ours has really great torque. And for the warranty we also don't have as long of one as they do but we started our business with a different mindset then the other companies and we know what it is like buying skateboards and parts so we offer our live chat and email to everyone so that they can get skateboard help with anything esk8 related even if its not something they bought from us, it can be anything! We want to help out the community and new esk8 riders with everything we know and want to create a great and reliable service for people.

[@Devdidthat]

@@DIYesk8Builders interesting where are you located ? Let's do a comparison (:

[@DIYesk8Builders]

We are in Portland Oregon

[@Devdidthat]

@@DIYesk8Builders Dang I'm in LA

[@mike212916]

How come your wheel pulley doesnt need to be screwed on to the wheel?

[@DIYesk8Builders]

It's a press fit pulley so the wheel pushes it against the hanger, keeping it in place with the bearing

[@johnd9357]

Why is there no range info on the site? Curious how much range this battery gives you?

[@DIYesk8Builders]

If you go to the Demon 2.0 or the kit product page and under the add to cart button there is the description with the specs and what is included

[@WAVMOB]

I thought the ESC FOCBOC unity went out of business ???

[@DIYesk8Builders]

Nope :) Enertion did but the unity is still for sale

[@WAVMOB]

@@DIYesk8Builders where do you get the unity from ?

[@DIYesk8Builders]

From Massive Stator and we also sell them

[@wesleyhudson1818]

How much 4 demon 2 d skateboard

[@DIYesk8Builders]

The Demon 3.0 is currently available for sale! propulsionboards.com/products/demon-3-0-kit?variant=40135090274422

[@yoassgoinhateme]

No plans of making a AT pre built?

[@DIYesk8Builders]

There already is one!

[@yoassgoinhateme]

@@DIYesk8Builders is it on the website?

[@DIYesk8Builders]

Yeah just go to the Demon 2.0 product and then there will be a drop down to select street, AT, or street + AT!

[@scottconover90]

Why 12s3p? Newto esk8 and I’m curious

[@DIYesk8Builders]

Our 12s3p has 40T cells which makes it have the same performance or maybe sometimes better specs than a 12s4p 30Q battery

[@zakmartin9950]

Do you ship to Canada

[@DIYesk8Builders]

At the moment we do not ship completes, but we can ship anything but the battery!

[@nicklegrey987]

@1:43 where did you get those parts from?

[@DIYesk8Builders]

they are sold on our website

[@nicklegrey987]

@@DIYesk8Builders before having a website, where did you guys get the parts?

[@nicklegrey987]

@@DIYesk8Builders can I build it for much cheaper?

[@setumalakar8663]

Vesc program to mobile phone

[@jonnymooney8538]

I’m 225 lbs will that deck be able to handle that power with me on it?

[@DIYesk8Builders]

Yes!

[@prathamsawant2754]

Do you ship to india

[@DIYesk8Builders]

Everything except for the battery

[@adolfomendez5439]

Wow 😳 Build me one please how much.

[@DIYesk8Builders]

You can buy it here: electric-skateboard-parts.myshopify.com/products/the-demon-2-0

[@dexshelton4483]

will you be selling the deck on your website?

[@DIYesk8Builders]

Yes, it's in stock and ready to ship! electric-skateboard-parts.myshopify.com/collections/decks-1/products/bamboo-drop-through-deck

[@kwynton8272]

Why do you use two 75 amp motors if the batery can only suply 95 amps ?

[@enjoyesk8978]

Just because the motors can handle 75 amps doesn’t mean you have to supply that much to them. Most of the time you’re not going to pull many amps unless you’re going up a steep hill

[@kwynton8272]

And do you have any idea on what the current draw is on flat cruising speed?

[@enjoyesk8978]

@@kwynton8272 not nearly what your battery puts or what a motor is capable of handling. Usually from startup you’re pulling more amps and hills can require more current

[@vivi-fe5rj]

Motor amps are not the same as battery amps. It has something to do with erpm, look more into it. Bottom line, 95 battery amps is a lot and won't be the limiting factor in the build.

[@enjoyesk8978]

@@kwynton8272 my original build was a dual 5065 motor LG 10S4P 10Ah with 80A output that I put together. I’m running close to 40A to each motor. I’m using a flipsky vesc 4 dual and it’s dialed in nice. Now I’m using 6374 motors and I can run higher amps. I’m building bigger batteries with more current. I’m hoping to start a 12S8P or 10P soon.

[@tbcreative562]

You guys ever considered foam to dampen vibrations?

[@DIYesk8Builders]

We have a new custom seal coming out in late March for the boards. Made from rubber!

[@tbcreative562]

I was meaning foam inside the enclosure, surrounding the battery. As in wedging it in place and allowing for vibrations, I suppose it depends where you ride but perhaps doing a video showing a build a little more suitable to rough terrain, ways to strengthen and make your build more durable?

[@DIYesk8Builders]

Yeah we will definitely consider that, but right now the batteries have a lot of padding already built into them

[@tbcreative562]

Oh true, I hadn't considered that lmao

[@kelvingartei9187]

How long does shipping takes

[@DIYesk8Builders]

lead time is 2-3 weeks, shipping by ups ground takes 4-5 days east coast, 1-3 west coast

[@igotdembombs]

How much does it weigh?

[@DIYesk8Builders]

30-31 pounds

[@alexisperez1226]

Is it water proof?

[@DIYesk8Builders]

no it is not

[@tbcreative562]

Can I use my evolve trucks with this?

[@tbcreative562]

As in are the dimensions the same?

[@DIYesk8Builders]

Yes

[@elpabloncho]

Hey there! which is the motor shaft diameter?

[@DIYesk8Builders]

10mm!

[@elpabloncho]

@@DIYesk8Builders thank you :)

[@mkultra7760]

Sleek/powerful built. Pitty I have to pay cca 30% import tax to EU. which is whooping cca $600 on top that 2k ! And that would be little too much....

[@DIYesk8Builders]

Yes, and we also currently only ship within the US... for now :(

[@302Rmack]

Buy it to a US address, have them ship it to you. Would that save some quid ???

[@mkultra7760]

@@302Rmack import taxes would kill me anyhow ...

[@302Rmack]

@@mkultra7760 sorry to hear that....

[@1dang01]

how much is it

[@DIYesk8Builders]

The prebuilt it $1999.99 or you can buy the kit for $1699.99

[@oscarcollinsiv]

Next time you should try putting the loctite on before you put the bolts in instead of ontop of the heads.......

[@302Rmack]

Anybody figure out the price difference in building it yourself???

[@DIYesk8Builders]

Its $300

[@spyderman478]

much love man that thing is so nasty. I am a fan of everything but the deck. I think that is a personal thing though. I am going to get that mechanical kit for my DIY.

[@DIYesk8Builders]

Thanks! Yeah everyone has their own deck preference. Yeah definitely, its a crazy good set up especially with the ability to easily switch to the AT wheels

[@spyderman478]

@@DIYesk8Builders you didnt have to set limits on the speed for the battery. to legit just rolled with it?

[@funnydumbvideos112]

Great video, but dont really have time for that lol

[@FractalTrades]

hey buddy, my plastic cover(the black batter cover) has been cracking near and around the multiple screws. any chance you can send a new black plastic cover? love th board!

[@FractalTrades]

the enclosure**

[@DIYesk8Builders]

Hi, please send us email to [e-mail]

[@rasoolmuth8451]

I make it

[@andrefortune8278]

Does this bored have a warranty??

[@DIYesk8Builders]

Yes it comes with a free 90 day warranty and a optional 1 year warranty. You can read more about it here: electric-skateboard-parts.myshopify.com/pages/warranty

[@andrefortune8278]

@@DIYesk8Builders does the additional warranty cover the kit or just the pre-built boards

[@DIYesk8Builders]

Unfortunately as of right now it only covers the prebuilt board but all the kits have the free 90 day warranty

[@Masterczulkix]

podjedz tym pod krawężnik :P ahaahaa

[@MadDonJuan]

Why you never show the speed advertised? And I think you should not cover the deck crews because those are vary Bridle and easily break, you will have to replace them all the time. Same thing came on my Verreal RS and is the weakest point on the board. Every one been breaking them. I replaced with 6m×25 black oxide steel screws, problem gone, wonderful tutorial in the build tho...

[@enjoyesk8978]

It will not do 38mph. Closer to 30. I highly doubt that they get the mileage they say either.

[@DIYesk8Builders]

@Eric Fical We will be putting out an update video with a speed tests, the sound of the motors(which some people are asking for), reviews that people are making about the Demon 2.0. I don't know why you think that we are over spec'ing the board.

[@enjoyesk8978]

@@DIYesk8Builders it will be interesting to see if it can reach that speed and range. I support your channel and what you do even if there is some exaggeration with speed and range. Also I know there’s a lot of variables like rider weight, wind and riding conditions. I wouldn’t attempt going over 30 with my double kingpin trucks. Way too unstable

[@DIYesk8Builders]

@@enjoyesk8978 Yeah definitely, we will have the specs shown. And apps and stuff to track it and show it to everyone

[@samreason9856]

@@DIYesk8Builders can’t wait for that video how long until you upload it

[@bradenlee5693]

focbox is sold out everywhere

[@DIYesk8Builders]

it is no longer a reliable ESC

[@setumalakar8663]

Vesc program doesn't

[@cabrail100]

1999 on a skateboard really.

[@hihipoo6824]

I mean it makes sense. Most electric longboards that are at that power and range is around that price if not more. The battery alone is expensive on its own. Obviously it would be nicer if it was cheaper but thats the market

[@cabrail100]

@@hihipoo6824 u guess but if u look at e scooters that are less than 1k even 700 for fact and speed range is more . But we have here skateboard which is smaller in size small wheels card board and battery and it cost 2000k sometig is not right here .

[@stevemartini470]

@@cabrail100 cheaper parts cant believe i have to tell you that

[@vivi-fe5rj]

You could make something similar if you're thrift and buy used parts or hop on sales for ~1200. Sure it's more than a scooter, but I don't like the look of scooters and skateboards are more fun to me.

[@hihipoo6824]

@@vivi-fe5rj yeah longboards are more fun imo. But if u scavenge the parts u probably won't be able to hit the speed or range of this model for the 1200. Then again I could be wrong. They're is always someone who sells a part for ridiculously cheap and it's new

[@club_rock]

HELLO I WANT TO MAKE CUSTOM ESKATES. CAN YOU TELL ME THE BEST CHANNELS AND SITES ABOUT DIY ESK8. ⚡️⚡️⚡️⚡️⚡️⚡️⚡️

[@DIYesk8Builders]

Email us at [e-mail] and we can discuss everything

[@eBoard3R]

🤙🏼🤙🏼

[@nickolas416]

Love the work but why is it that kit is the same price as the ore built? I get you need to make money but when buying pre built we are paying for time,energy, and “expertise” , while with the pre built we are paying for the parts that should already have profit margins built Into the price. So why would anyone choose parts over pre built? I know the argument can be made that it’s already a niche market and you need to make money where you can do pushing people to the pre built at a potently higher coast is good but by not letting people have the option of a cheaper alternative you are losing more of that already small group that wants one due to higher price and weird pricing. This is just my thought but it’s your company so you can do what you want.

[@DIYesk8Builders]

Hi, the kit costs $300 cheaper...

[@akshaysawant7987]

Fuckin awesome 😍😍

[@666thebmxkiller]

503

[@mannyechaluce3814]

Chicken legs :D

[@Agent77X]

Everything that is assembled is sold out!

[@DIYesk8Builders]

??

[@Evolve816]

I'd rather spend $1300 for the Miles Phantom, which is my next board, and this is someone who spent $1800 for a Onewheel XR. The Phantom has 30 miles and range and 28 - 30+ mph and cloud wheels. No brainier for me.

[@DIYesk8Builders]

I would love to hear how you like it! Looks like a great board

[@ExQuisiTMotions]

i wouldve rather spent $5k on a lacroix then bought the demon 1.0.

[@Evolve816]

@@ExQuisiTMotions $5k?..... You might as well buy a used car or a motorcycle at that price, but that's just me. $5k is a lot of extra money laying around the house under your couch. Lol

[@ExQuisiTMotions]

@@Evolve816 ya... I have no use for another car. And a motorcycle means higher insurance which I ain’t doin. I’m just much more interested in a bigger battery since my demon 1.0 doesn’t last me even half the amount of time I want to be riding for....I’m also heavy on the throttle so.... I get minimal battery life.

[@Evolve816]

@@ExQuisiTMotions Dang must be nice not to need a car. Lol where I live we don't have a choice. So I definitely feel ya on no extra insurance and maintenance cost. So how fast is your demon and what's the current range?