The devil broke my 3d printer

ESSENTIAL EQUIPMENT: www.blackmagic...
JOIN the "FELLOWSHIP" on PATREON: bit.ly/JoinTheB...
OFFICIAL BMC MERCH: bit.ly/BMCmerch
#BlackMagicCraft #Episode263 #idolsoftorment
HUGE THANKS ARCHVILLAIN GAMES FOR SPONSORING THIS VIDEO! CHECK THEM OUT : bit.ly/AVBMC
In this video I deal withe the results of a broken 3d printer. Somehow I still ended up with enough of the awesome model on the failed prints to turn it into some amazing terrain for my game IDOLS of TORMENT.
If you want to stay up to date on the development of my game you can join the mailer on www.idolsoftor...
---------------------------------------------------------------------
➳ www.blackmagicc...
➳ Facebook: goo.gl/hvNgQL
➳ Join the Tabletop Crafters Guild: goo.gl/RMMqoh

[@BlackMagicCraftOfficial]

HUGE THANKS *ARCHVILLAIN GAMES* FOR SPONSORING THIS VIDEO! *CHECK THEM OUT* : bit.ly/AVBMC So.....anyone know how I managed to actually break the screen? Because I'm still not entirely sure.

[@craft-o-matic2377]

Looks incredible Jeremy!

[@burleyman101]

I had a very similar failure a while back. Pretty sure it was just because I had the plate too tight to the screen after a leveling and it was putting too much pressure on the screen. Worked for a while but the repeated nature of printing caused it to fail eventually. I could actually hear the glass creaking and groaning every time the plate went down but I totally didn't associate it with what was happening. I thought it was the FEP popping as the print was releasing. Stupid. Good news is that replacing the screen was relatively painless.

[@XTr3m3b4sh]

There was probably a bit of resin from a previous failed print still in the tank. When the buildplate descended to print the first layer, it pressed the chunk of resin into the screen and cracked it. Don't worry, sometimes the screen just breaks from overheating or something and there is no indication except for massive chunks of cured resin on your build plate :)

[@christianoneal4787]

Jeremy, have you ever looked into Montana Gold Spray Paints? They sell a marble effect that you can just rattle can onto a model after you paint it. Looks awesome. It sprays in the marble veins for you in a random pattern.

[@robdunkel1056]

The sad thing is you will never be able to print thin pieces like that on purpose.

[@forgotn42]

I dig the contrast between the hellish figures and the heavenly figures. My favorite part is how their color palettes were inverted from the norm, since it's usually the angels that are all white and pure with the dark and messy appearance for the devils. It adds a lot to the worldbuilding to have them swapped and shows some of the chaos that erupted when heaven and hell collapsed into each other.

[@JP_Idols_of_Torment]

I wish I could hit like twice on this.

[@IBAGVincentDrake]

I broke my Mars screen like this once, it was a small bit of a failed print that had stuck to the FEP no more then 1mm or less of material, but that extra thickness was enough that when I started the next print, crack. now I always check with a scraper if there is any loose material at the bottom of the vat and relevel the plate every dozen prints.

[@demon1103]

yeah, that's what I do, I tend to need to stir up the resin in the vat before printing anyway, so while I do that I check the bottom if possible.

[@MrBizteck]

Yes my mars is cracked in the top corner..... Ive been very lazy to replace.

[@KilgoreVoid]

I guess that screen wasn’t all it was cracked up to be.

[@BlackMagicCraftOfficial]

Thanks dad!

[@TougherLoki]

I laughed so hard my sides split!

[@algorithm_acolyte]

DOHOHOHOHOHO

[@____________838]

That just doesn’t line up.

[@DaleTrevors]

I enjoy the catchy title :) Btw there's a very high chance that you'll read this comment, so I want to tell you that you're an inspiration, Jeremy :) I always look forward to your videos! Love your style & all!

[@HacksawsHobbyBunker]

That's the most metal thing I have seen crafted so far. You keep raising the bar...totally looking forward to whats to come. Cheers!

[@sindarpeacheyeisacommie8688]

I totally dig that you didn't toss the messed up figure. Instead, you took it as a challenge made something new and unique and completely your own.

[@sergioazevedo4267]

From chaos to triumph... That base is incredible! You could take any mini, throw it on top, and it'll look infinitely cooler because of it. Awesome job as always!

[@jacobkonkel6793]

I love the Plague City builds because I'm all about 40k but, by far, your Torment builds are my favorite. I love the clutter and the over usage of bits as debris and scattered items. I'm a visual learner and seeing this terrain makes me want to dive into the world and lore.

[@ricks5756]

Parts of those "failures" would make interesting elements in a cyberpunk/steampunk/future like diorama. I personally love how they turned out like that :) Great work on your set piece, looks very good !

[@happythejuggler]

I've got a mortar and pestle that I grind those little pastels in, and then I put them in little vials. It took an afternoon to grind down one of those pastel sets into an equal amount of vials of pigment powders. love it!

[@CronosVids]

When you blur the lines between hobby and art, you know you’re onto something great. Excellent work!

[@matalbot84]

I totally feel your pain... My printer had an issue a few months ago and I replaced the screen. Now I am starting to see a bit of an area where the screen is beginning to fail on one side... But i love to see your determination to turn Lemons into lemonade.... I have been watching you since the inception of your channel... Keep up the great work you are an inspiration.

[@ocalicreek]

First off, you were one of the first channels I found that dragged me into the mini-painting world, and I am always glad when I see another video. Now.....that resin flew off and hurt your finger. Good thing it wasn't your EYES! Why not wear some eye protection next time? Cracked screens can be replaced. Damaged retinas? Not so simple. I want to continue watching your videos. Take care of your body so you can keep on making them! Oh, and this project turned out to be SPECTACULAR! The best part was seeing how excited you got over transforming a failure into a feature. Rock on.

[@BlackMagicCraftOfficial]

Because my hand was protecting my eyes :) I also was using the tired and true turn away and close eyes technique at the same time. Honestly I'm pretty good about eye protection (I had a scratched retina while I was working in trades and it's awful) but this situation there was really no risk to the eyes.

[@ocalicreek]

@@BlackMagicCraftOfficial As long as you feel safe, you know your limits. And yeah, you are usually really great about demonstrating safety in the shop whether it is fumes, cutting, skin protection, etc. so thanks for that. Oh, and I've used that "squint and clip" myself on occasion...

[@drizzt102]

This is the mark of a truly fully passionate and involved craftsperson and it translates to GMing to. Things don't go as planned. Oh well. You don't throw it out. You don't walk away. You go "Okay lets pivot what can I do with what I got." Turned out awesome man well done!!

[@prestonp.1867]

"...remnants of both for reasons that'll be explained in the book..." Well now I'm even more interested than I already was. Great build! Keep up the amazing work.

[@Karrot001]

another great build J, love the extra lore for the game, heaven and hell both falling in on themselves? awesome, cant say ive heard that idea before. keep up the good work and high spirits. :)

[@thevosk]

sooo ... im new here ... and i want to say i saw this on my "recommended because i watch Devil May Cry 5" .... this hobby looks truly EPIC, tyvm for the introduction (and for once, praise the algorithm!)

[@lemonardodavinci4138]

turning a failure into a success is what makes a player into a king! Beautiful piece and I enjoyed the different pick of background music in this one.

[@hauptsacheeinkanal3515]

Do u what music he used??? Would love to use it for dnd :D

[@Walican132]

I love that you painted the foam steps back to the foam color.

[@WeShallLoveOn]

Oh yeah it not having legs actually adds to the creepiness and terror a lot. Like is this statue just ethereally floating like an angel.

[@euansmith3699]

Gilbert's foam cutting jigs are so creative. That staircase came out so well. I like how you turned lemons into lemonade with this build. The oil washes really are the icing on an awesome cake with this piece.

[@steampunk8036]

As always, I get inspiration and learn new techniques from you, Jeremy. I'm currently on an XPS foam project with a "monster hunter" theme. It's a triangular-shaped building and I'm going to use some of your wash techniques that I learned in this video on hit. Thanks again, brother! -Rick, USMC

[@alphanaut14]

I used to do marble dips with spray paint on water (multiple sprays/colors)- then dipping the piece in. A Malachite statue this way might look fantastic. When you said marble, that's where my thoughts went.

[@Harbinger1776]

So happy you revisited your Torment project!

[@pistol0grip0pump]

5:23 - I legitimately thought that was a bloody sandwich for a moment there lmao 🤦‍♂️ 😅😂

[@marykayryan7891]

I LOVE that you made do with the broken pieces you had. I myself use a lot of small found objects. Amazing what is on the ground if one is looking. You're right. It is a very cool piece.

[@tonysmoot3712]

I love the videos where you just go with it and build. Still love the tutorials, but these ones feel more like just hanging out with you while making stuff, and it's great. Can't wait for IoT to drop!!

[@Salic1231]

Awesome video! The Torment videos are my favorite and I love it when you combine them with models from AV games

[@sindarpeacheyeisacommie8688]

Your next idol of torment: paint it as though it were made from a single piece of turquoise. Bronze, marble, turquoise. Make the statuary in Hell follow a kind of color code.

[@Lykon]

I think that missing supports (or not strong enough supports) caused the errors. Those errors created a blob in those spots, and those blobs put pressure on the LCD. Always triple check your supports.

[@emmacarter6109]

I love the way you pivot when you hit an obstacle - something I aspire to.

[@Mr_Feyshade]

If you want to try airbrushing marble, 'Artis Opus' made a video on using dryer sheets or baby wipes to get the veiny patterns. He did it for his Slannesh demon army. That Baphomet statue is f'kin metal as HELL!

[@mericanadian101]

I really love how you take something that didn't turn out 100% the way you originally wanted, and make it something (possibly) even better!

[@RainMakeR_Workshop]

Huh, so two KZbinrs are coming out with their own Hell themed skirmish game. Black Magic Craft with "Idols of Torment" and Tabletop Minions with "Reign in Hell". Sweet.

[@notreallydavid]

It's the End of Days. Or something.

[@AVspectre]

Both come by it naturally as an area of interest. Perhaps there will be some overlap in being able to use terrain for both etc :)

[@HerrMatom]

man this looks so awesome i frickin love it. The only Detail i personally would have liked are a ton of candles on the stairs like a "makeshift" Altar of sorts or a Magnet of some crazed worshippers or something like that. The Candles, for me, would reinforce that feeling of something godly, worth of praying to but in this case its a Prince of Hell, which is neat.

[@joek600]

''Take these broken wings And learn to fly again Learn to live so free'' this should be the soundtrack of this video lol

[@marcuswelbymd7881]

Love that magic of the first undercoat! Everything just meshes together inside all different. Well done, looking forward to IoT.

[@Bluecadet1987]

I have to say the chalk pastel tip blew my mind slightly. Thanks for another great video!

[@dodgethejester9553]

I love that green black oil wash, I'm doing the forge world raven guard primarch corvus corax model and i wanted his armor to look like old graveyard stone and his wings and jetpack to be oxidised copper or brass,this is so much better looking, I'm definitely going to incorporate this old stone look into his armour, it was brilliant inspiration thank you for it ✌️, Savage looking

[@bettsdn]

This is one of the more metal creations you have made. And that is saying something.

[@zedgathegreat9122]

I'd love to see more on the chalk brushing. That looks like an amazing trick, but wasn't able to grasp everything by watching. Is there a final layer to hold the chalk in place after brushing it on? Despite that, this is another amazing build. I love the gold horns and rod. They really seem to tie the whole thing together while being such a small detail.

[@BlackMagicCraftOfficial]

I leave the chalk dust as a final step. You CAN lock it in more with a clear coat or even with a spray of alchohol. But this will change the look to appear slightly less dry and dusty.

[@michaelsorensen7567]

Not sure if you went back to any of the older Torment vids to see the chalk there? Might help with seeing it better

[@OkayHobbyTime]

That turned out awesome. Love the colours!

[@londoncreative]

Watching you cut up the foam to make steps made me jealous - I posted my video on Sunday about the trials and pains I went through trying to get a couple of sheets of XPS Foam in the UK, you can buy it from craft shops but it is soo expensive and amazon uk only sells 5mm sheets. I checked out your suggestions on the shop, hoping maybe you knew something I was missing, but no luck. So if you want a cringe or stare in shock at what ended up happening (and I do credit you in the video) it's up to view on my channel now. Cheers Nic

[@rcornejo911]

I know Orcus is the centerpiece of the AVG Tome of Demons Vol. II set. But that Adramal is easily my favorite part of the collection. What you've done with it is amazing. Sorry that it cost you a screen in the process.

[@Codex_of_Wisdom]

Been really living up to your channel name lately. Very appropriate mini to have broken your printer. Made for a good title and an awesome mini. Small fails are often the biggest successes!

[@HeroesBosses]

Not gonna lie, I just came here to read the crazy comments :) Was not disappointed.

[@photogfrank2146]

This is really a sweet-ass piece! I love the base and the way you damaged and added rubble to the steps! It looks like your airbrushing has come a long way as well! Two thumbs up!

[@AxDhan]

totally and absuletly not clickbait xD, Im sorry that it broke, as any tool, its part of the experience

[@dukerottingface]

DAMN THAT'S SICK! Excellent piece and I think the devil's hand definitely broke your printer to make this broken statue look evil af

[@dukewellington9308]

That is awesome. Well done on being able to have the vision of making something amazing out of something that most people would have just broken down and thrown it away.

[@bspcyclist]

Awesome job Jeremy! Way to turn lemons in to lemonade! I am constantly inspired by your channel.

[@jeanmalo7173]

I really love watching you build and paint your "dioramas"...it's actually giving me incentive to try out my airbrush for the first time...stay safe!

[@Christopher_Gibbons]

Yeah, the manufacturers don't like to advertise it, but because of the way the print is basically ripped off the screen a few hundred times per model, those screens are more or less a consumable. If mechanical stress doesn't get them, the lcd itself will fail after about 200-800 hours of printing. The manufacturer might sell a replacement, or you can ask on Reddit. They are usually just normal lcd's made by sharp.

[@reinaldorodrigues8425]

Your description of the realm being a mix of Holy & Profane iconography kinda reminds me of the Pandemonium Fortress from Diablo 3, it is a place who's been passing trough the hands of both the High Heavens and the Burning Hell, so it get a mixed archytecture from both factions as well 🤔

[@Sallivan4eg]

Man, music on this video is ultra good! So good that its refreshing after identical tracks all over youtube.

[@Tonz_of_Fun]

I like the headcanon for this piece I have. From what you said; that torment is heaven and hell crashed together. This statue is actually from the heaven side but has been re-purposed by the current denizens.

[@chrischristiansen6204]

The lack of legs makes it make even more otherworldly.

[@dusreev7085]

The most badass way to save a failed print I've seen to date! This is why I always come back to watch your content!!

[@tryckstergaming2031]

Not gonna lie, I joined Archvilain patreon in December and got my 3D printer in January and I don't regret it. Amazing sculp, so easy to use, amazing support. Also sorry for your printer... Really cool piece you made tho!!!!

[@reddoggarage7706]

Nice recovery from a bad event. Sounds like your game comes in the time between the Rapture and the Second Coming.

[@keng.2468]

Wow! This is a great piece. I love how you improvised and turned a negative with the 3D printing into a positive! Well done!

[@charmedimsure8852]

Cant wait to try Idols of Torment mysel! Build looks awesome.

[@Madbamlooted]

“And I’m not one to give up” just goes at that print hahaha

[@okayminiatures7573]

Resin is tough stuff. I can definitely relate to the pain of breaking off pieces of a 3d print. Also, nice work on this build. Looking forward to the kickstarter

[@kevinuller]

Really like this piece. Looks great! Where did you find the music in this video? It really set a chill hobby mood.

[@makeshiftminis9090]

When things go wrong in crafting and yet you still managed to make something great out of it I am reminded of a line from a silly old movie. From the Ashes of disaster grow the Roses of success.

[@Red-ie2tz]

I love your work so much! so evocative! The atmosphere you have made with this inspires me to make terrain and to play your new game! I love that you add all the little extra details to break the flat areas to add more textures. Did you purposley make pantagons to link in with pentagrams with the whole demonic theme or have I been watching too much supernatural? Cant wait to play Idols of torment!

[@BlackMagicCraftOfficial]

Lol, I did!

[@evanhughes7609]

Terrific rescue there!

[@goblincavecrafting]

LOVE what you did with this one, and the music was ON POINT TOO! All the best with the new Torment project too.

[@metalgearbas4]

Hi man, I see you have an absolutely amazing workspace! Would you mind sharing how you deal with the Resin-fumes/smells? I have a resin-printer in my workspace as well, but I'm not sure how to deal with the fumes when I'm working there.. Thanks! Keep up the great work :D

[@tomkilger9854]

I saw that Goobertown video in the background lol! Awesome work as usual!

[@scasimir1000]

Since you play d&d you can take the ones that are partially melted and make it seem like it was trying to come through a portal and failed Midway

[@c4darkmane616]

loving the dramatic montage music

[@nihlarts5266]

you should really get a magnetic bed for your prints, it makes really easy to remove and maintain the printer

[@industrialillusions22]

i currently use the Anycubic Mono X and i was curious what youre setting are in regards to lift speeds and exposure times and support setting etc ? I'm trying to experiment with a bunch of different settings to get the best prints but i also don't want to go in wild and blind with my settings, I've already wasted so much Resin as it is ! :)

[@BDZman1069]

That came out awesome!!!! I 'm going to try that technique with the oil washes on my next projects and see how they turn out.

[@jakesells2379]

the no legs thing actually looks pretty sick.

[@MonkeyJedi99]

Yay! The video is in the vein of my suggestion to the community post! (Recovering from a failure) I am not so conceited as to think it was only me who was responsible. I'm just psyched that I was in the right lane.

[@garrettmorgan4430]

love the base, adding some more candles to the base and playing with some object source lighting would be cool

[@BlackMagicCraftOfficial]

Yea, did that on many of the other pieces. Had no more candles though, and….well….a broken printer. Otherwise would have done more for sure.

[@Coltain476]

Love it. Great to see what you can do with what otherwise would have been a failed print.

[@Bluecho4]

Necessity may be the mother of invention, but Accidental Fuckups is the _father._ Sometimes, mistakes can lead to the most creative output.

[@Krooked_Teeth]

Really dug the music at 9:10

[@HLSnake]

Awesome piece! The stairs made me think of the final level of the deep dungeon side area in FFT. My wife wants to know what the music is that starts round 17:55 for the reveal :D

[@Maestria00]

Hey Jeremy, are you doing your own music? Because I think you really nailed it for this one. I really like the vibe as it really fits the theme and what is going on. Good job on the edit!

[@pedroauter2759]

That looks amazing!!!!!! Loved the paint job and the base :D also, do you have a video painting and setting the terrain for that other demon you already did?

[@BlackMagicCraftOfficial]

Yup, there are three videos in a series covering the other terrain built in this set. There is a playlist on my channel.

[@riverdelavidawilliams9624]

5:25 wait a minute, is that another goobertown cameo?

[@haruka6844]

you should totally make like a massive boss event with a huge peice !

[@SecretRedBeard]

As soon as I saw those prints I knew exactly what happened. My heart goes out to you, its so disappointing for that to happen lol

[@SecretRedBeard]

If you contact the Photon people, they may be able to fix the screen for you, or send you a new one! As for breaking it, what likely happened is there was a minuscule bit of debris, yeah. The photon pushes down hard

[@BlackMagicCraftOfficial]

Got a replacement machine in my hands less than 7 days after it broke :) Back up and running!

[@SecretRedBeard]

@@BlackMagicCraftOfficial Let's gooo!

[@PuckCurtis]

The piano piece here is really good. If that's you on the keyboard, this is me digitally fist-bumping you for awesomeness.

[@sleepyatnoon]

Hey, been enjoying your videos for a while now. Keep it up! When you cut the model it seems way too hard, indicating you might be overexposing your prints. I have the same printer and recently reduced from 4.5 to 3 seconds and the print quality improved dramatically. You should check out VOG's settings vid, most helpful

[@alvarodiaz290]

Honestly, I think it's one of your best creations. Awesome!!

[@geekfreak69]

Absolutely incredible terrain piece and the miniature is awesome. Specially as the issue with your printer. Mind Blowing…

[@Walican132]

I need that pigment powder step explained more. What did you buy and use? Beginner friendly?

[@AVspectre]

Really striking piece. Always cool to see the build that results from unforeseen circumstances. :)

[@sysop224]

That, Sir, is the closest thing to magic I have ever seen! Just - WOW!

[@dadsrcworkbench1322]

I use failed prints for kit bashing or paint test dummies. Great video.

[@jacobsteeley3909]

This video style was enjoyable in an interesting way, it seemed a little more raw than normal in some areas but with a little more focused in others. Keep up the great work Jeremy!

[@BlackMagicCraftOfficial]

Thanks!

[@bn-auric79]

0:21 you mean a hell of a start?

[@ElNick09]

talk about turning lemons into lemonade! That looks great, very cool to hear your games progressing!