THE DURAMAX GETS MAJOR UPGRADES 😎

[@TheJoshRed]

Yo Dan. I highly recommend replacing the seal on that 3rd brake light. i can see from the video that its toast... The top portion for SURE. I'd hate to see that nice new interior get soaked. This is coming from 18 years of auto glass experience. I cant even count how many times truck owners came back to shop complaining about a leak after we replaced their glass. A quick diagnosis almost always led us to the third brake light seal. I doubt you'll be able to get JUST the seal. You usually have to buy the whole tail light. But I'd just remove the old foam seal crap with a scraper, and use a thin strip of butyl tape. works like a charm I totally love all your videos man!

[@GhostlyDelinquent]

everyone should like this to get it to top so dan can see

[@_Drewpy]

Aye quick question, what if my shit didn’t even come with a seal from factory ?

[@baileymacquarrie1313]

lilbryant504 flex seal

[@ravensurge4024]

lilbryant504 you drive a Chevy? That sounds like a common Silverado problem

[@ravensurge4024]

lilbryant504 also if your truck is fairly new I would recommend going back to the dealership to get that sorted out

[@gittyupalice96]

I just wanted to take a moment, for the opportunity to personally thank you Dan. Thank you so very much for cleaning that god dam center console finally. Its been driving me crazy since the first time I saw this truck appear on the channel. Again, thank you. lol

[@drewurquhart4275]

gittyupalice96 holy shit I thought I was the only one. That has been pissing me off for weeks now😂

[@makinwaves8147]

Clean ass interior... DIRTY ASS CENTER CONSOLE?!?!?!

[@IAMTHECABOOSE]

Anyone else notice how Dan's views boosted the past few months? We all enjoy Happy Dan

[@bikelifegriffgriffin4627]

William Ricard n now he’s over a mil subs ya buddy killinum dan

[@Andrew-wh1yq]

Dad’s growing up. Had to come back to read the comments, lol.

[@TyFlin]

Been waiting on this since the last episode, lovin’ the Dually series.

[@V36_j]

xDifficultRaven same

[@stdennis19]

Really can't tell you how much I look forward to these builds, specifically this one. Dan as "just a guy" going through all these steps into handling this stuff is more entertaining than almost every other Build/custom tv show/web series.

[@gabi-sw8zw]

DIESEL DAN IS Back!! Iv been waiting all week for this video!

[@largenloud9744]

what about motovloger Dan

[@bryanjames5090]

Yesss same here

[@shaneherrington1718]

I was a car audio installer for many years trick for you on running and taping multiple wires. First put wires in drill and vise twist the wires together by chucking them into drill and spin wires together. Trick when removing from drill hood wires in hand and let them spin back slowly. You will get it! Your skills have came so far from the kid that sharpied his bike back in the day.

[@jackreece123]

Shane Herrington You read my mind

[@marz8853]

what do you mean by put them into drill and vise twist the wires together?

[@jackreece123]

Marzifyy put 2 wires in the end of a drill and close the chuck where it clamps them both. Then, hole the other end of the wires and the drill will twist the wires together making it all neat. Google it I’m sure you’ll find pics

[@marz8853]

jackreece123 thank you!

[@ryanhammond3388]

I didn’t know dan made movies Just kidding the longer your videos are the better

[@alexrudachyk6385]

Lol

[@beeeeeeeeeepo]

I haven't ever really looked forward to a video coming out on KZbin before. With that said, every single one of these videos in this series is extremely engaging, and I look forward to every single one. This is the quality content KZbin was made for, good shit Dan.

[@makinwaves8147]

where the FUCK is my super suit this is a very well spoken (written) comment, and a very true one at that.

[@badbezerker1921]

Hey Dan, I just wanted to let you know that as somebody that only likes bikes and high end cars(literally only ever thought about trucks in order to haul my bikes lol). I absolutely love this series. I’ve watched every episode from start to end and I really appreciate your work man. Thank you for the videos!

[@calebknutson9019]

Dan, when you're wiring up more lightbars and things of the sort to that one switch Relays will be your best friend. They're not too complicated and are definitely worth the extra few bucks.

[@Rellsrides]

Caleb Knutson absolutely and they’ll be brighter

[@calebknutson9019]

Probably not a noticeable amount but measurable. They will prevent voltage drop and not very much current has to flow through that switch in the cab to activate the relay, which is a huge plus. One could just jump a fuse in the cab and it would save alot of headache with wiring.

[@capntom6410]

That grommet you used for the leds bed lights, looks a lot like a sunroof drain

[@JDority]

Tom Donahue yep that’s a sunroof drain lol

[@theshortbus6126]

that's exactly what it is....

[@kirulasilva5141]

THIS is the definition of customization. Two thumbs up 👍🏽👍🏽

[@alexlerman1792]

Danny Tacoma done grew up. Danny Dually 😂

[@CMFSXN]

Daily Browser Dually Danny the short gay lesbian😆 is that still a thing?

[@mrtz2796]

Na hes just dually dan now... he grew up from tacoma danny to dually daddy😂

[@kevinhenson5942]

I didn't expect you to go nearly this in depth with this project, or put out this much content. You're doing a good job, man. I'd go as far as to say I'm proud of you. Keep it up.

[@Deke1]

When you're done with all the mods to the truck, are you going to give a complete breakdown on the total cost of doing it all..

[@tangodrizzle]

Gonna be easily over 80k Thats with the price of the truck im guessing he got it for 50k

[@ScarfaceTM123456789]

William Leonard idk about 50k. It probably has a salvage title

[@SnifferSock]

@@tangodrizzle 80k is a high. New tires and a bed aren't cheap but he's getting a hookup on a lot of stuff. Most of the smaller mods are done for 100s of dollars not thousands anyway.

[@JohnDoe-nz6bk]

William Leonard not 50 with a salvage title. He said he got it cheap, Im guessing 20 grand!

[@ghibbz5960]

John Doe I agree with you the truck wasn’t in that good of shape when he got it

[@timjacobsmedia]

This is legit my favorite build series on KZbin. It is so refreshing seeing someone doing the work themselves, instead of throwing money around to have this stuff done. Keep it up Dan!!

[@BigmoneyMando]

This truck used to be a welding rig truck for the pipeline and Odessa Texas. I used to see it all the time.

[@DannyRice01]

Nice. How badly abused was it for the interior to be like that?

[@black07rr]

Any rig truck takes abuse from pipeline welding, lots of mud, sand, clay, the areas where pipelines are put in are in the middle of nowhere, some trucks need pulled to location by dozers if it’s been raining or the welds are up the side of a mountain

[@black07rr]

And some pipeliners aren’t worried about their trucks, they make 6k a week on some jobs, they buy a truck, setup up, beat the piss out of it and buy another🤷🏼‍♂️

[@DannyRice01]

@@black07rr Probably crashed it himself then to claim a new one

[@BigmoneyMando]

You can also tell because there is soapstone in the glovebox

[@owenspalding971]

Tip: Switched power can be jumpered to the constant power before the switch rather than running a third wire all the way to the battery.

[@TheRnzr]

pretty sure that "grommet" you used to run the wire into the cab is a sunroof drain....

[@Redchew10]

Should’ve done Klearz Amber reflector replacements while you had the headlights apart

[@CLEETUS_BMM]

I don’t give a shit what anyone thinks, Dan is a damn artist when it comes to this shit. You learn from your mistakes and overcome every time and the stuff looks great dude! Loving the series!

[@UnholyPastaRolly]

Dude I stay anticipating your new videos. Not even a truck guy. started here for the bikes, then the cars, I love what you're doing with the truck! Its awesome watching this machine come together!

[@markwalker6692]

Feeling cute, might watch a Do it With Dan video, IDK.

[@aFullGrownTuna]

Honestly, these are the only 40 min videos I'll watch start to finish. Awesome series Dan!

[@johnengland2491]

This is one of my favorite KZbin series in a long time. I appreciate all the attention to detail with all your work you're putting into this build without putting in a bunch of filler scenes. I just really hope you don't keep the interior a mix of black and brown lol

[@TheMrDubstepic]

This is what I subscribe to people for. The DIY content that everyone can try for their first time just like you are. Doing it all on camera and taking the time to video it and tell us your experience. I don't even have a truck but the content is very interesting and I like to see builds where you aren't taking it to a shop for someone else to do everything.

[@yamaha8599]

Love this build man. You’re building your truck the way YOU want it. Keep at it. I look forward to every video on the duramax. Can’t wait to see the finished product.

[@korbenvasko]

I f*cking love these videos! You get to see so many different things and so much progression in the truck build. Cant wait to see the complete product!!!!! Dan is the man!

[@corndawg0024]

Even a 40 minute video isn’t long enough. Love watching dan work. I do things very similar.

[@027yuvraj]

This dude has worked so hard and the channel has grown so much. Love how he is trying to do different things everyday. Way to go dan ♥️

[@Miss__Victoria]

Dan: Puts zip ties on bolt for mixing. *Nasa wants to know your location* lol

[@hutchalmighty3490]

Put a camper shell on it! It would look sick after good wrap job!

[@lukepedulla3359]

My favorite series on youtube right now. Keep the great videos coming!

[@mike15101]

Honestly dan... this is one of my most favorite build series on youtube ever. thanks for the content brother

[@tonyevansjr]

Love the super long videos 👌🏽 I can just turn it on and kick back for a while

[@brandonsteffenhauser]

Awesome work on the bed lighting. This is a future project for my truck as well. Seeing you do it reaffirms the approach I want to take. Looks great!

[@TheTalentedTrout]

Man I respect you so much, there's no way I could ever be arsed to do the fiddly kinda shit you do all the time and you have great attention to detail too.

[@DrCaptainObvious]

This series is sick.

[@leoozwow7234]

I love this series so much!!! I just want to keep seeing more and more content! Great build Dan

[@noahh8253]

Seeing Dan go out of his comfort zone and do this is really awesome. Great job my friend, this build is looking amazing!

[@Aintloudenuff]

The grommet on the back of the cab you thought should have wires I believe is the drain tube for the sunroof to drain water from it not 100% but I would double check to prevent water from coming in but love the build !

[@irocthe85]

This is totally my favorite series you’ve done, thus far.

[@kylepayne2120]

I cannot wait to see this truck done. Keep it up, looks great.

[@jakel2643]

31:19 Hey I couldn’t help but notice you listening to Funhaus Demo Disk haha!

[@logotho7340]

I just can't get enough of this series. I get to the 34 minute mark and I realize "UGH there's only 6 minutes left?" Loving the Dualie content, Dan

[@marz8853]

i LOVE these long videos and i love how he really goes into detail about stuff. i feel like i actually learn stuff from his videos

[@paulwatson4176]

Literally dont even care about motorcycles anymore lol i absolutely love this series. I can't wait to see how bad ass this truck is after you're done with it. Keep doing you bro!

[@awdeveau]

Loving this build! Extremely impressed with the work you have put into this, it's coming together great!

[@xThatGuyLink]

Seriously loving the long-form videos. I know its a lot of work to edit, but the product you are producing is good shit!

[@jacksonj7617]

Man i can not wait to see this beast finished. Loving this videos keep up the great work Dan.

[@joshuaplantan90]

I just wanna say I really appreciate and enjoy Dan's craftsmanship and quality of work

[@JoshJoshua88]

I'm so happy you listened to me about using Mother's! Thank you!

[@caseytodd7632]

I'm watching the view count on these 30+ minute dually videos...Dan is making it rain!! Keep it up, buddy! Your fans love it!

[@jaydenmoore3315]

This build has been awesome I love the truck content one of my favourite builds i have watched keep up the awesome progress can’t wait to see what comes next

[@issolater1]

Did anyone else see Dan spit while singing at 13:54 😂😂 “I can’t fight this feeling!” Lmao

[@Wolfnx]

This series is giving me more confidence to personalize my own car and truck. I approve of your work and would be happy with it if it were from a shop

[@andrewpearson8702]

Big fan of the long form of these videos. Truck is going to look amazing. Probably your best build yet.

[@majorpain3779]

I wonder if that wiring can handle a max load. Idk what kind of current draw you'd get with 11 different devices charging at once but it seems concerning to me. Loving the series though!

[@kennethmatte9008]

Love the work you are putting into this. Also loving the longer videos. You should check into using friction tape in some areas instead of regular electrical tape. You can usually find it the same place you find electrical tape. Lowe’s has it for sure because that’s where I get mine.

[@OnEst_Opinion]

Best thing to watch at the DMV. EVER. Keep em coming homie

[@crazethedave]

That little spark plug and looking boot on the back of the cab is most likely the sunroof drain for excess water that passes through the sunroof glass seal.

[@havokmaster2]

Dan, future referance 1 can of two part 2k clear ( like 25 on amazon) and 600grit wet sand is all you need to repair foggy headlight lenses. Wet Sand to even 600 grit and spray with a can of 2 part one can 2k clear. Comes out perfect for me everytime. Love the truck and enjoy watching your adventures.

[@phatkidd100]

Just gotta say this build series has been my favorite thing you have done, good job man

[@maddog8911capt]

Dude, you are killing it! Do you know how many people send out their lights to get done what you did to them? Keep it up man!

[@gangster60000000]

Just a quick tip, if you want to keep wires nice and tight together put one end of wires in a vice then the other in a drill chuck and then spin to desired tightness then tape a little on each end. Love the vids.

[@holtpierce6815]

Great content Dan, always enjoy your videos. Progress in the gym looks like it's paying off as well. Keep up the good work.

[@McLovin-bz3tl]

Really great things you’re doing to this truck Danny I can’t wait till you and Justin do some crazy design on it, I’d like to see the wrapped camo, or else a nice solid black or white paint job. Seriously keep up the great work Danny.

[@tpow2651]

Great work Dan. Your hard work for our entertainment is appreciated. The truck is coming along amazingly you're doing a great job. #realtalk

[@Jake_915]

This has probably been my favorite build series besides when he first got the Magna back 👌 my man Dan has come a long way

[@ralphralphin]

Job well done sir. For anyone who has done some of this stuff yourself, it ALWAYS turns out to be a longer, harder, more complicated job than you expect in the beginning.This looks like a 60 to 70% redo job from stock, so this truck is really going to be Dan's creation. I just hope you keep it and enjoy your work and effort.

[@mattperry5989]

How the hell did I just now stumble upon your channel? Your videos are bad ass! Very nice truck man, I’m diggin this build and can’t wait to see the final product

[@avereemahler1193]

wooooooooooooooooooo i fricking love this build sm i come on here everyday to look if you uploaded and i got super excited when you posted this

[@marthijnvanoorschot7776]

To be honest, I am not really into this kind of builds etc. But when Dan is doing something, no matter what, to me it's always worth watching

[@ashchackal]

I love this truck! Thanks for sharing all the work you put into it!

[@xN07xR341x]

DAMN DAN! This upload has got me pumped like my pre-workout! Great job Killin it!

[@Isaacj-31]

Dan watches Funhaus confirmed!!

[@rileymauck7575]

I’m absolutely loving this series

[@mr.noneofyourbusiness3234]

Not going to lie Dan, I have been "not watching" these vids but for some damn reason I decided to take a peek at this one and I wasn't disapointed. I am almost done rewiring my 99 VT750 after chopping it so all this wiring stuff gets me jazzed. I can't believe I am about to say this because I give ZERO shits for 4 wheel builds but....I actualy want to see how this adventure turns one for you. Good vid man!

[@cknorris3644]

I have those same bed lights. Things are bright!! Also sanding the headlight lenses before polishing makes less work and better end result. I usually sand, rubbing compound, polish and then a clear coat.

[@FreddietheFly]

I appreciate all the hard work you put into making these videos. Good stuff man!

[@jakeblackman5930]

Truck looks good man, I would suggest switching all of your running lights (cab, mirrors) to bright white. It would complete the sick looking light setup

[@diodedynamics]

Great job on this Dan! We're proud to have our products on this build!

[@splashfrank4945]

Love the way he’s making this build series ,one video every couple days but just enough content each video

[@ELDELACHEVY93]

Man im so digging these long vids!!

[@Blight_Knight]

Favorite series of videos you’ve done without a doubt. I’m so excited for this truck and it’s not even mine lol

[@matdiclemente3564]

Hey man, been watching you're videos for a long ass time now and I'm really diggin this truck build. You're doin a really nice job on her.. just a quick tip though, I learned this the hard way. But after polishing the headlights you should be putting on some kind of sealer help to protect from uv rays or else they can start fogging up and oxidizing just after few months. Hopefully you see this and it can save you some time down the road. Keep up the good work and awesome content..

[@matthewmorris9266]

Dan, just a little something for ya in the future. When running multiple wires like for your light bar switch, you can actually take those wires and put them in a drill and spin it. It will give you the tightness of the wires (in a braided form), and will eliminate the need for all that electrical tape.

[@jaydencain4539]

There’s a whole in pasenger side floor board to run wires through

[@braylonmaynard7331]

Jayden Cain Hole** dumbass

[@stevenfortier6436]

Braylon= yeruh Dahyk

[@viciousvulture8068]

This is a lot to do on your own. Proud of how it all turned out so far.

[@kennyb4689]

Favourite video yet. Loved that it was longer

[@Stuub117]

Dan loving these videos keep up the work can’t wait for the final project

[@brandonclevenger9177]

Freakin badass. I've never even remotely been interested in different lighting options before, but this is super cool

[@Jackmarr95]

to make life easier for shrinking inline connectors or sleeved female/male spade connectors go to your local kitchen supply shop and buy a £7(dont know what it charges at the dollar) butane kitchen torch so much quicker and surprisingly easier if you need to work in areas where you need to reduce the radial heat

[@GovernmentName69]

Dan if you put the 3 wires in the end of a drill and the other end of the wires in a vice and hold it tight and spin the drill the wires will form around eachother nicely not needing any tape!

[@stovlsuzuki]

Hey dan if i may share some mechanical advice. Over time the glue on the electric tape you used will age and begin to come loose. Especially when it comes temprature changes like heat or cold. A little trick ive found that helps prevent the tape from coming off is on the ends where the tape begins and ends, put some heat shrink or a zip tie around it. That way when the tape ages, it wont start coming off and exposing the wires your trying to protect. Also id personally like to see you find a way to velcro the under-seat leds to the seats instead of just useing the adhesive strips they come with. That way if for some reason you need to pull out the seats again, you can without ruining the leds adhesive.

[@michaell.cunningham2708]

Looks awesome, Dan! Keep it up. Another great episode in the series.

[@tonyrr3214]

I love the long videos. Very very much enjoyed watching it.

[@mattkacher8056]

Dan you should rgb the roof and mirror lights as well I think it would give the lighting a unique touch don't see it very often

[@Kodiak660]

Looking good Dan! Really enjoying this build!