The Easiest Way To Wash + Clay + Wax | THE RAG COMPANY

Yvan Lacroix of Optimum Polymer Technologies is in the TRC studio to show just how easily you can wash, clay & wax your car in the most efficient way possible!
_______________________________________________
PRODUCTS USED:
Optimum No-Rinse: www.theragcomp...
Optimum Car Wax: www.theragcomp...
Opti-Seal: www.theragcomp...
Big Red Sponge: www.theragcomp...
Ultra-Clay Towel: www.theragcomp...
Ultra-Clay Mitt: www.theragcomp...
Edgeless 365 Towel: www.theragcomp...
Double Twistress Drying Towel: www.theragcomp...
________________________________________________
SHOW INFO:
Host: Levi Gates
Guest: Yvan Lacroix
Recorded by: Dane Hennen, Anthony Fisher
Edited by: Tim O'Brien
_____________________________
www.TheRagComp...
Content provided courtesy of The Rag Company ©2018

[@DeathByLaBamba]

Walter White is really taking this car wash business serious.

[@NasryNazir]

😅😅 W.W, My Shining Star.

[@ManuelLopez-qf3cn]

🤣😂🤣😂🤣

[@ManuelLopez-qf3cn]

Mr Heisenberg 🤣

[@Amor1990]

Not even close

[@GDavis49]

What blend of microfiber is Yvan’s bow tie?

[@bernieharaldson5665]

For a typical exterior detail does this method replace the need for a power buffer?

[@LacroixCruiser]

Bernie Haraldson no

[@carbonconnection2480]

Levi, I’ve been on the fence about the clay mitt... the more I see it used the more I think I need to get out of my old ways/ old school thinking. Does this completely replace using clay bars?

[@Sherukka]

This is like a more soft claybar so you will need clay on some bad cases

[@briandraper7630]

Aaron Corley yes the clay mitt replaces a clay bar. Much faster and more efficient. I have a medium and a fine grade clay mitt from chemical guys that works great. I use ONR as my lubricant after I wash and decontaminate the car. So easy. Then I just run the clay mitt on a grit guard at the bottom of a bucket of clean water and wring out then start the next section

[@carbonconnection2480]

@@briandraper7630 I tried them, I perfer my clay

[@Mike_Spina]

@Yvan Lacroix, i was wondering, there a specific way to clean the clay mitt? i will be using it on occasion and not in a shop environment. Do we just rinse the mittbwith water after the car is done, wring it out and let air dry? thank you!

[@smb1014]

Mike Spina Let it soak in a bucket of ONR diluted at the standard dilution of 256:1. Refresh the ONR every few months if you wash your car every few weeks.

[@JEFFDEWILLE]

Just standard ONR dilution? Not clay bar dilution?

[@ethanblan435]

Standard is fine

[@roadhouseguy]

Can I use Optimum Car Wax as a drying aid weekly or should I use Optimum Quick Detailer as a maintenance wash drying aid. I already have wax on my car and like the water beading performance of my wax. However it’s nice to add a bit of pop when you’re doing your weekly wash. What do you think?

[@brendancaldwell5376]

Definitely the most efficient and safe way to wash/clay/wax your vehicle. I've used this method professionally for a few months on many vehicles without a single scratch. It's so easy, and so amazing! Thanks guys!

[@taylorthrall7321]

Is any polishing required? I don't have a machine polisher

[@2of2DCH]

The clip around the 1:03 mark really shows how much weight Yvan has lost. Well done sir!

[@LacroixCruiser]

2of2DCH thank you, weight loss is a side effect of being healthy.

[@kokoloko12398]

@@LacroixCruiser Congrats Yvan! Best from France ❤️

[@Sherukka]

Wadester P. Coletrain No, it is only temporary...

[@jezzie1965]

Yvan Lacroix side effect of being ill as well

[@cptcosmo]

@@jezzie1965 Yvan does not look ill to me. Quite the opposite. Keep up the hard work, Yvan. The Battle of the Bulge is not easy. Congrats!

[@bstewartexecutivecarcare6953]

I started using ONR about a month ago to start practicing for when I have to shut off my hose. I figured if it didn't work out I could still go back and wash using traditional methods. I have been quite impressed with the ease of use and using the wax how it leaves a nice shine and slickness to the paint. Now does it get into all the nooks and spaces that a hose or power washer would? No. Does it add scratches to the finish? I think it isn't any more harmful than using a micro fiber wash mitt as long as you follow the proper technique. I use a light colored micro fiber towel so I can see how much dirt I'm picking up. Using a 16x16 inch towel I get 8 sides and if my car is dirty it takes 2 towels. To summarize I think this is a very good product that has plenty of uses, but won't completely replace the traditional wash method. I like it and will use it throughout the winter months with confidence that I'm still keeping my car clean.

[@Sherukka]

B Stewart ExecutiveCarCare The Big Red Sponge is actually much safer, look at for example Apex videos which shows how bad the microfibre ones release the dirt in comparison with BRS.

[@a.k1311]

If Ivan is in, im Watching the vid.. great to see you Ivan🤙🏽

[@sportscarnut]

Love Optimum products and Mr. Lacroix presentations. Great stuff!

[@iKone911]

background music is not necessary

[@iKone911]

@@theragcompany And now will buy clay towel instead of clay bar in the future. ;)

[@logopneumatika]

Levi is the best. Other KZbinrs in this industry obsess over their six-figure Porches and Beamers while Levi-who teaches them how it’s all done-is putting a junkyard hood on his pickup. Thanks for keeping it in the real world, Levi!

[@LacroixCruiser]

JR Harris so true, Levi is justifiably proud of his Elantra and truck. His resources go into his family, not showing off to the world. You can have as much fun in a Ford as a Ferrari, you can have as much pride in a Silverado as a Silver Cloud.

[@logopneumatika]

yvan lacroix - Profound and poetic!

[@MasterOfShine]

@@logopneumatika Thanks JR!! Yeah, I'm a cheap date! But Yvan is spot on, I work for my family to make them comfortable.

[@logopneumatika]

Levi Gates - Just keep being you!

[@fatashreviews5670]

No trees around that junkyard hood (that the clay mitt didnt remove) that hood hadent been there long.

[@martinharman574]

I love these videos with Levi & Yvan, like a dynamic double act. Really helpful, great

[@madwax1360]

Will be doing this process tomorrow morning....can't wait!

[@anw0625]

Do you have to use the ONR or can you use the spray wax as a lubricant for the clay mitt?

[@stnkpalm]

The Optimum website says, "Do not soak in liquid." when referring to the Ultra Clay Towel and Mitt. In this video they are clearly soaking in the ONR bucket. The website also says, " Do not squeeze or wring out." but Yvan squeezes it out over the bucket shortly after 2:20. Are the instructions correct?

[@AlE-kc7yw]

Yvan did that because he wasn't actually using it on the car. He was just using it to show it to the audience....and he didn't want it just dripping all over the place....and it was a very light wring

[@beardedg500]

Yes the instructions are correct they are just using them wrong, in the long run, the towel and mitt has less life

[@motomuscl3]

I’ve yet to find a clay towel, mitt, sponge that doesn’t marr paint!

[@shelmadinegalloway2480]

*🌅Brilliant🌞we appreciate your share🗺& Time showing us😇More ways of Becoming Better👍🏾*

[@JonFFavale]

Mr. ONR. "I like the stuff" 🤣

[@MyGuyKirby]

Now that was one dirty hood, glad Levi is still planning to do more magic. Speaking of magic, ONR is proving itself on my test car. Gotta trust the man, Yvan, who keeps washing cars 🚗 in a bow tie.

[@LacroixCruiser]

thomkirby thank you, and trust me the bow tie is much better for the eyes than a speedo...

[@MyGuyKirby]

yvan lacroix oh please then do keep the bow tie! You have lost lots of weight and should be proud of that accomplishment, no speedo please.

[@reddarin]

@@LacroixCruiser lol

[@awzup57]

I just picked up one of these clay towels. Im pretty excited to try it out, I just hope its not too fine to be able to clay my wifes daily and still benfit from it being faster.

[@briandraper7630]

Anthony Zupanek chemical guys has a nice medium grade clay mitt it’s perfect

[@mercorey3258]

Such BS. The hood is in mint condition. Anyone can wet a hood and throw dirt/sand on it and let it dry to make it look like that. The hood is shining with just water rinse off.

[@LacroixCruiser]

Mercorey LoL, there are a few other videos featuring this hood, it’s far from mint.

[@mercorey3258]

It’s pretty dam close to being in mint condition.

[@LacroixCruiser]

Mercorey have a look at this video, you will see a few frames that show that this truly is a junkyard hood. kzbin.info/www/bejne/mYWpc6SNZ51sn6c

[@danielsolomon1710]

Try do this in Malaysia with our nasty weather you will get tons of watermark and our UV ray is crazy the clear coat will be damage very badly and good luck doing it without polish

[@jackdale9249]

HI The best ever is to use Bilt Hamber clay fr the UK they have their own clay mine! avail in S, M, H grades it is so pure they say and it is TRUE! you can use just plain water for lube ! ! try it let me know what you think? and update your video with w/an addendum ? thx Jack

[@boofstien2]

Love Yvan, he gave me the confidence to give ONR a try and it really has saved me all much time and money. Levi, (love you too) Does the rag company have approved distributors in the UK?

[@LacroixCruiser]

boof gaming Clean and Shiny

[@ripster9713]

More interior stuff plz

[@truthseekerKJV]

That hood was not sitting in a junkyard as most junk cars do. That hood was lightly dusted with some dirt after it was detailed. These guys are full of crap and lying through their teeth about what they're telling you.

[@joeortiz7499]

Actual cleaning starts at 7:15

[@scottturner864]

Great job on the weight loss Yvan!

[@joaolopes3038]

ainda nao consigo entender como passar uma esponja em cima de um carro sujo vai limpar e nao arranhar o carro.....queria muito experimentar mas tenho medo dos riscos na pintura...

[@milanjurich1526]

It really is that easy!

[@codyfrancis4474]

Incapsulating and emulsifying lol sounds like snake oil term to me lol

[@lindsayj135]

Too much dribble, too slow, don't need all the ins and outs, just get on with the job

[@DiHandley]

That hood has to be the best I’ve ever seen in a junk yard.

[@Audittr2108]

Two of the nicest guys in detailing!

[@rogermendez7266]

Hack job. Great lubrication on the bucket and sponge. but just can't seem to try it at a daily Actually Real world STREET DETAILING and not in a shop nicely Cool and with ac lol 🤣 Something WILSON auto Detailing would do. lol

[@josequiroz4605]

If only stores near me carried this products. I would be buying them. But nobody seems to carry here in phoenix arizona.

[@markklotz3675]

jose quiroz Amazon

[@ThePeak64]

Thanks for an informative video. I like the amount of detail that you go into, it is however spoilt to a small extent by the background music that can at times be intrusive especially at the point where you demonstrate the credit card trick on the surface. I am now going to go and buy a clay mitt to use with my ONR (fantastic product) Keep the videos coming guys👍

[@Jesus92GP]

HI ! My question is : microfiber towel leaves scratches ? 😢

[@theragcompany]

Bad quality and/or improperly-used ones certainly can 👍

[@jamalcole1985]

No paint correction(compound/polish) on a junkyard hood?

[@DETAILINGDETAILING-hb7bj]

Question could l just spray the wax on the towel/mitt or only just one spray on panel?

[@LacroixCruiser]

215DETAILING 215DETAILING it’s best to spray on the panels and spread from there.

[@MSRez95]

Does washing car with ONR remove old detail spray sealants or spray waxes previously used on car?? Or any quick detailers for that matter??

[@LacroixCruiser]

M S no, Optimum No Rinse(ONR) removes dirt, not protection.

[@user-gn6yf3wf6e]

Ok good podac. Ea my job car polishing. Bahrain.

[@boeingt7236]

At 0:21 he has that look of" "Put some respek on my name."

[@paj1015]

Why that annoying background-music? You can't hear the difference on dirty or the clean surface.

[@2busytv166]

I would be very interested in how you can do a full process of ceramic coating. Can you use onr and wash-decontaminate then compound+polish followed by ceramic coating? Just with onr and your solutions without having to use a pressure washer

[@King_drew]

Question, when, in this process would you apply iron remover?

[@tk104]

Use the iron remover as your clay lubricant instead of the car wax. Rinse off the iron remover then clean the surface with ONR again then wax and/or seal as desired.

[@alaury13]

I normally do a quick wash to take the dirt off, follow up with a foam application with a clay mit, dry the car and then wax it. I’m mobile so to me that’s the quickest and best way to wash, clay, wax when you’re on the go.

[@Alexander060278]

Is it possible to use the Optimum Spray Wax after washing with Optimum no Rinse Wash and Wax? Someone tested it?

[@stnkpalm]

Has something happened to the Optimum Clay Mitt and Clay Towel? They seem to have disappeared from the Optimum and Rag Company websites.

[@bigozzie75]

How many cars can be cleaned with one 5 gallon bucket of ONR and BRS before it has to be changed? ( the ONR) Thank you!

[@Siwulam]

Great video

[@laurafelicetti3569]

Can these product be use on ceramics coated cars? I hate to ruin shine and coating after spending all that money on my vette. I have been using car pro reload and echo h2o for protection of coating.

[@freddymiguelponce]

What ONR bucket mean?

[@freddymiguelponce]

@@theragcompany Thank you!

[@Gunnvulcan]

The new ultra clay rag is the only OPT product ive ever been disappointed with. I can work a panels for as long as i like and the clay doesnt seem to ever remove any contamination. Its not sticky at all, like other clay rags ive used before.

[@garyrafiq9561]

Why are you using a terry towel instead of a microfiber towel to wipe and dry? Doesn't the terry towel leave scratches on the surface?

[@ericsanchez7388]

What camera was used at 1:14?

[@Gnetbird]

I know they say a clay towel is better. You notice the surface was not completely cleaned? The dirt and Contaminates we're not completely removed completely? That is because it takes a lot of scrubing on the surface with a clay towel. A clay bar is a lot faster and better for the paint. I use a clay bar if I want to to do things right.

[@josephirey4660]

Watching this guy remove dirt is tough. At this rate he'll be done next month detailing a half a hood

[@kristofferpence]

So are these discontinued? Still use mine, but cannot find them anywhere anymore when it comes time to replace it

[@King_drew]

All that is needed to keep clay towel clean, dip it in the bucket after each panel. Boom, done lol.

[@markaraujo06]

i'll wear my working uniform plus apron sometimes dust mask added no suits or bow ties.

[@92F0XBody]

This is for Mr. Gates or Mr. Lacroix. I have seen this process done many times and it sounds great. BUT, in the event there is road film on the panel (Very likely because driving through the rain happens often) what is the proper process? The car wax would just mix with the slurry of road film on the panel. What I personally do is spray a degreaser on the panel before using the ONR. Would you use power clean?

[@LacroixCruiser]

302QuestSwap “Road Film” for the most part is an urban legend invented to sell you more products. Unless you only wash your vehicle once per year you have nothing to fear. TRC can link to a car Levi and I washed with Optimum No Rinse(ONR) that had not been washed in over a year. With that said if you wish to prewash with Optimum Power Clean please feel free to do so.

[@LacroixCruiser]

302QuestSwap here is the link kzbin.info/www/bejne/e6KYaoibp5Zqqsk

[@92F0XBody]

I respect your opinion and stance on numerous things. Road film is something that always made sense to me because all of the oils and fluids on the road get sprayed on your vehicle and typically aren’t water soluble which is why I didn’t think ONR (or even soap and water) would remove it from the surface.

[@LacroixCruiser]

Simply try a section of the vehicle with Optimum No Rinse(ONR), if you feel it isn’t clean enough then by all means get out your IK foamer and have some fun with Optimum Power Clean at 5/1. That said you will be surprised what Optimum No Rinse(ONR) can and will dissolve. The best area you can use to test is your windows, it’s very easy to see if there are any film after cleaning.

[@Jeeper1378]

Yvan Lacroix hmmm FIRST time hearing this.

[@josephsloan5270]

Impressive demonstration, and product.

[@DefensorFortis]

It would be neat to see a GoPro on the bottom of the bucket to show how the dirt is settling

[@renegarcia7591]

To each their own but I’m not a fan I want to see foam and suds and I want to see the gunk on my clay bar

[@stephenbissett3280]

How often should you do this on a Gloss Coated vehicle?

[@LacroixCruiser]

Stephen Bissett once a year

[@LoveLikeaHurricane]

Does this clay towel need to be “prepped on glass” like other clay towels?

[@GoTMLGo1967]

If I keep an regular clay mitt clean, could I still use it with ONR?

[@dien2no423]

Do you have a kit that includes the essentials for a newbie?

[@karloshaz9847]

You can tell the hood it's been wax and shine before he uses the red sponge.

[@markevanado9463]

Your link for the ultra ultra clay mitt leads to the ultra clay bar

[@pjfan173]

I use the double twister with P& S Bead Maker as a drying agent

[@kimijonghighball9626]

I think Maguiar's products do the same. Less $$$ too!

[@monochrom8514]

Teleshopping for car owners... Boring at the best 😴

[@vancouverisland771]

Nope not a believer in your wash clay system.

[@eugeniustheodidactus8890]

I hope you don't charge people for doing that to their car!

[@myoption100]

I use a leaf blower to dry my car few towels for touch up

[@Gunnvulcan]

Whats a reasonable timeframe and price for a service like this and, say, an interior vacuum?

[@victorbocanegra4773]

🤔 I'm so not believing this.

[@andregreen8040]

I’m so agreeing with you.

[@jc4074]

@@andregreen8040 Clay and wax at the same time. No thank you.

[@on-site4094]

I prefer grios products

[@LuisPerez-gz5ci]

Ivan is immortal

[@LacroixCruiser]

blaspHEMI 11 far from it, I’m just old.

[@jerrychanhly]

Bright Yellow, white, bright green, any bright color, not dark blue if you want customer to see dirt. But I hear the pitch.

[@edmundiverson6377]

I don't think it's meant to show customers, but instead to help you see the buildup as you're working. It's a much better product overall when used as directed.

[@meanf1502]

Levi so one spray of that wax for the whole panel

[@andytaylor2321]

Where are the links to purchase the clay towel

[@bigstick346]

And what is O&R???

[@ethanblan435]

It’s ONR it stands for Optimum No Rinse

[@ToddLandholm-ch2ng]

The master at work Yvan is the best!

[@randomnav]

Never trust anyone that wears a bow tie.

[@Jeeper1378]

“Mr ONR” didn’t age well 😆

[@christopherdavis9137]

Is the ultra clay mitt no longer made?

[@Jaden-up3bg]

Love your stuff!! It's working great for me

[@ChriS-mw2yd]

So I don’t need a polisher if I’m planning on clay barring my car?

[@ethanblan435]

Not if you use the right products properly

[@Flywithcraig]

You were using circle movement, I didn't think you should do that?

[@LacroixCruiser]

Craig Heywood you can use the shape you wish, lines, circles, tri-angles, octagons, your choice

[@alanbailey5621]

Making mud pies.

[@dennisthemenance5433]

Being a Handicapped Vet,My Silver Car belongs ot a Monthly Car Was for $25 mo ( I get 20% of) so cost me $20mo and I drive it thru the Soft touch Wash Mode 2x wk up here in Wi. after Blow Drying? I get out with my Spray Wax( Mcguires or Turtle) and Spray the Whole Car down , Including the Windsheild( I Super Clean the Windshield every 3-6 mos) and I don't Wipe it down ! My Lincoln MKZ has 2 Coats of Clear Coat.. And after 11 yrs ( its a 08') it still shines like New, including my Chrome Wheels! Ave of every 2-3 yrs, I have my Fvorite Body shop take care of any Scratches and Nicks.. The Auto Shop that Mainntains it for rme? Wants first Dibs on buying it when I'm ready.. Which will be This Summer, since I'm Getting a Fellow Veterans 2017 Lincoln Contenetial.. He's Going to Go Live with his Daughters Family and Not Driving much Anymore, Selling me His Lincoln for 1/2 the price he paid for it with Inheritance $ ..( $20k) IF you have the ave of 1 hr to hand wash your car? BMG.. but If you make $25 hr on your job? Why? Just Get a Car with Clear Coating and Join a Car Wash Club.. And Once a Month? Get their Premium cleaning that does the Interior and Super Coats the Wheels and Does the Best Tire Shing that will lst a Month. For ave of $35 and Help Keep some guys Employed..!..

[@SuperTuber85]

Could I do a wash clay wax and finish with bead maker? Or do I need something else between wax and bead maker? Thanks!

[@KelvyGoveo]

good question

[@LacroixCruiser]

ketonement if you feel the need yes

[@SibawayhDroid]

12:53 why you didn't flip the card!!!!!!

[@codeseven7057]

Is this better than the clay?

[@JFomo]

Will this clay cloth/mit swirl and mar up my paint?

[@ethanblan435]

Not if it’s used properly

[@rickdff62]

How do you clean the contamination that's left behind in the clay towel?

[@Sherukka]

Nooby Vapor Rinse it in the ONR bucket