The Essential Guide On Installing Supermoto Wheels (KTM EXC)

[@TheSam123281]

best video with information I've found so far. Thanks!

[@forresttorix4747]

Awesome video. Thank you for your time and knowledge

[@SteveReynolds-w2e]

Great video and well filmed. I have just bought KKE motard wheels and want to know if road tyres can be put straight on or do I need to do anything to the wheels to make sure they hold air

[@BKcycles]

Should be able to just put them straight on!

[@MariosSaketos]

3:40 are those orange you call bearings,spacers?so you can fit a big tyre?because I put on my wrf450 2009 a 150/60 and it is slightly rubbing on the side .I've seen people recommending to offset the rear wheel or put spacers for the sprocket.

[@mikei50]

Great info video on super moto change over.

[@faiththemissingpeace6168]

Great vid brother. Quick question, any tips on getting the front brake caliper on the 320mm rotor? What a pain!! Thanks!!

[@MotoBrando]

Hey for your front wheel are the wheel spacers the same for your dirt tire and the supermoto? Like are they interchangeable if u let’s say lost a set?

[@TheMocard]

to avoid the chain issues.. just have the chain setup so it's towards the front of your setup on dirt wheels.. and then you have lots of space to tighten with the smaller sprocket on the street setup.. I don't change my chain.. just swap wheels and front fender :)

[@7-v4z]

Choice ,what size sprockets are your running brother

[@rickyonwheels48]

good stuff. hope i can be doing this to my bike soon

[@dirtman5997]

Hello great Vid, just wondering if you used the 4.25 rear wheel or the 5.00? After riding these do you have any recommendations before I order mine? I think I want the 5's unless there's a good reason why I shouldn't. I'm run a 130/90/18 Motoz now so I'm 98% sure they'll fit. Thanks for any help

[@BKcycles]

Those wheels are 4.25, I've never ran a 5" rear but I've heard they're better suited for track because they have better grip around corners but less manoeuvrability. Good luck!

[@TheMocard]

I run a 5".. it's tricky to get over the rear break caliper but still do-able.. 2018 - 500

[@michaell.colavecchio8717]

Where did u get the rims?

[@BKcycles]

I bought them second hand, but you can get a set on the KKE website or ebay

[@johnwick5612]

Thank you bro great video🤝🏻

[@joshpoli1654]

Hi, I am wondering what size your rear rim was ?

[@BKcycles]

Rear dirt rim is 18" and supermoto rim is 17"

[@idklol-v5y]

@@BKcycles you put 1882 for your speedo would that be the same for all 17 inch rims?

[@bluemeanie6395]

Why aren't you using a cush drive hub? A lot of shock will be transferred directly to your gearbox.

[@TheMocard]

They have cush drive built into the clutch.. I've put 33,000kms on my 2018 500 with Supermoto wheels and never had a problem.. and I do ride it !

[@idklol-v5y]

@@TheMocard does that go for dirtbikes like husqvarna too?

[@TheMocard]

@@idklol-v5yi believe it’s the same on Husky’s

[@idklol-v5y]

@@TheMocard thanks man, cus im literally thinking of getting cush drive hubs on my smpros but i suppose theres no point if the clutch got it aready

[@TheMocard]

@@idklol-v5y I have 35,000kms on my 18 500.. and never had a problem.. 80% supermoto setup for those km's .. save your money for tires :D