The Evo VIII Rebuild | Ep.18

[@jamesemcclure]

In Ep. 6 at 2:59 you removed all the shift pins with the gears at the same time. In this episode you inserted them individually after the gears were set in place. Perhaps this helps explain why the transmission is not working correctly. It would suggest the springs and balls don't align correctly to receive the pins if the gears are in place.

[@BrokePremiere]

I hope the transmission works out! This thing is by far the most beautiful one I’ve ever seen! I can’t wait to see it put back in! Gonna look killer!

[@tomswindler64]

Ask for help ,you’ve done everything right,don’t worry about your ego it happens just move on 👍👍👍😎😎😎

[@jimmadonna1436]

I have a PROFOUND RESPECT FOR you. You seem to never give up or give in. Your Brothers are the same way.

[@NZBallBag]

I have been watching his brothers hilux build. He is real chill too.

[@mikef2492]

Hey you may be stuck but know a hell of a lot more about transmissions then before! You got this

[@jimmadonna1436]

Look at that wire chafing issue. I can't believe that she hasn't been left hanging somewhere. Thanks for fixing her car. If she brought it to a shop, they probably rip her off!

[@ivaninzunzaa]

My favorite time of the day💪🏼

[@angushouston8763]

How do you stay so calm?? 5 hours!! I lose my mind

[@sypora2069]

he loves what he is doing just doesn’t think about the time because it makes him happy.

[@Ethanmcrooks]

@@sypora2069 I like it too but damn. I’d start chucking shit

[@ruisilva3317]

He loves doing it and the fact that it isn't his daily helps a lot. If it was his daily and the only way he can travel then he would probably be big mad. Specially if he had to travel to a job as well

[@jonathanxtapia]

On the blue Subie - what i did on my track one that I used to have, You can undue all clips underneath, it will have enough slack where you can move the whole harness towards you and above and then zip tie it. You wont have to worry about the wheel hitting the harness again.

[@nodollarinc9948]

Im not a transmission expert but Ive had a few apart, make sure the rods are on the right hole, also make sure the grooves on the rods are facing the right way, Take the little balls back out and make sure they are all the same diameter. Dumb little things like that can give you a lot of trouble. Try not to jam the rods 2 hard as it will create imperfections on the hole and that can also fuck it up. They should slide in with ease. You got this!!

[@tabryis]

my brother you're not useless. some things are just beyond us sometimes, never consider yourself useless. compared to the shortcomings i have, IM useless compared to your skills as a mechanic.

[@itsGewch]

I think back to the abandoned Evo and how you kept looking for the potential problems and it ended up being something so small. Keep at it D, you’ll figure it out

[@themilkmanbear3786]

You'll figure it out bro, on that transmission. keep crushing

[@LeonNaude111]

Rule 101: don't fix something that isn't broken😉

[@tonior3574]

Wish I had the chance to just learn to do things you do by working with you honestly. Love your vids and I’ve recently come across your channel. You’re mad talented bro

[@95theRasmus]

You're such an inspiration Devin, honestly. Keep up the great content im loving it.

[@RyanSampsonRPh]

That is frustrating but keep at it, you will figure it out (like you always do)!!

[@Jdm2005sti]

Loved the e85 too but not enough stations in the state of Washington like oregon and California. Gl with the evo transmission hopefully gets back to shifting like oem 🙏🏽🤙🏽

[@TheHDInstinct]

The brake caliper compressor too will work you just have to set it on the brake the correct way, im not sure i could walk you through it with words but look up video on the product and watch how they use it. You could also need a double caliber compressor in which case it looks just like that but double sided and same advice implies. Love the work keep it up

[@saber2299]

Question. Have you try to contact guy you sold your black sti how the sti is running. I remeber his mom drove it back were ever they came from hehe??

[@thomasmurphy5906]

I'm 100% sure you are going to resolve the issue 💯

[@lelethuquwe9213]

bro am learning a lot of staff from your contents, keep on showing more.

[@bradymarsh123]

to push the calliper piston back in use a C clamp so it has even pressure and won’t scratch the calliper as bad or at all

[@jay-gf7qk]

I’m not familiar with this platform but with transmissions that I have worked on when you take out the pivot shaft and take it apart you wanna put it back together exactly the same way it came out

[@NINE9XX]

You're a big inspiration holmes!

[@laser-sj]

Cold starting problems is 100% a tune/map issue. Tuning for power is easy.... making it civilised when not sending it is where the skill is 😁

[@GLTCHEAD]

I ain’t gonna lie that red eye bring back memories....and it fits you

[@CraigShanks1]

Brake Piston wind back tool! Scissors jack works a dream try it out!

[@allanmuhoro1240]

Never a dull moment watching your videos

[@Anfurnyy]

The reason that e85 starts better is probably some sort of post start/ cranking fuel enrichment. Usually just a tune change

[@5h1naw0ng53]

Try looking up a ratcheting brake caliper press, works great

[@houstonbrown9529]

There is a gas station in Spokane maverick 1019 E Francis Ave, Spokane, Washington

[@houstonbrown9529]

That has E85

[@gregforeman5530]

Bolt the transmission back together and add fluid it’s dry. Fill it and it should be ok you have checked everything dozens of times. It’s been sitting without any fluids and not turning it’s going to act different then when it has all the fluids and turning

[@jeremyhamilton387]

That's sad to hear, there are e85 pumps everywhere here in Colorado Springs. So close to 400k subs tho! Keep up the grind!

[@WTH3129]

Look into and find a ratcheting caliper piston tool.

[@EJ257IHI]

Why did the WRX need another engine? Did the oil pickup tube fail?

[@Motorcyclefan17]

Large c clamp works great on calipers

[@ryanmacurdy5869]

Fitment industries put you in there video like two days ago.

[@joedoherty100]

Louis transmission on Monroe st can help you if needed. Great transmission repair shop!!

[@ryanmacurdy5869]

We've all been waiting for E in Spokane. 7 gas stations in a whole state isn't enough.

[@jibrilarmy1864]

Bro'are you iron man?i seen non stop work did by you'.that a great work bro.

[@MrZimmaframe]

won't them wires just rub through again if the car isn't raised up a bit on the front or change position so they don't rub?

[@austinn2008]

Lisle 29100 pad spreader is one you looking for.

[@ryanpsti]

I have an 04 STi. Any thoughts on a major rattle coming from the trunk or wing? I’ve tightened the wing. Mainly when I hit bumps.

[@_Machine631_]

At this point you tried your best with the trans. I wouldn't see it as a Loss for you. Because you learned. Once a shop fixes it they can tell you what the issue was and you can learn from that.

[@damourssteeven]

Are the balls and springs the same size ? Maybe mesure them 🤷 love the evo builds man 👍

[@abdullahzahid7962]

Love from Pakistan ❤️

[@sandman2257]

Going wide on the Subie? Chubby Subby?

[@tonitakave9775]

We on LESSSSSSSGO

[@mysmidget01]

Are the shift rods back in the right spot? is there 2 that are close and just maybe swapped into to the wrong place just a thought

[@craigerss123]

We need more subie days

[@jamarhall6378]

Don't feel bad there not one where I live at in NJ all of them r like hour and more away

[@filmesvelozes.top.10..hort36]

FILMES. VELOZES. TOP. 10 👍😃📣🚩🚩NO. BRASIL 🚩🚩👍👍😆📣💶💴 O. JOGO. VIROU.

[@aaronbutton598]

Here in Utah where I'm at the only e85 station is a hour away

[@no_lft_shft]

Bro I'm kind of digging those Steelies on that Hawkeye lol

[@hypedennis82]

Try to push them in with a big screw driver before u take out the old pads

[@JohnDoe-uk7jy]

Need help with wiring? South Main Auto and Pine Hollow Diagnostics on youtube are some good sources.

[@IggyHernandez]

Yasss finally another vid!

[@tradeMark182]

My boy

[@victorgarica22]

Devin's the best

[@SinEvo9]

Would you ever move to Texas dev?

[@ryanjones6251]

Just about to go to sleep aswel looks like it'll need to wait

[@MrPyorii]

We need E85 IN Tri- Citys too!

[@meitsme6]

Sounds like you should open your own station with an e85 pump

[@ivaninzunzaa]

10:29 played it off like nothing happened haha

[@bfighter125]

Slow chant, GTR, GTR, GTR, GTR, GTR!

[@carsforlife2464]

U should get some milwaukee impact wrench. They will make your life way easier

[@maple_syrup_boy_1175]

Is that X for sale?

[@bennims8746]

Can’t wait til devin gets a GTR

[@insaneoutcast3627]

Yup, I would’ve hammered that thing after 5 hours 🤣

[@dylanbrooner9836]

I knew you were getting a subie i love you bro❤ Edit: Nvm😪

[@sypora2069]

i wish

[@Castiel_Pr]

👍🏻

[@kurtabo208]

More. Subaru. Content. 👏

[@samandarburkhanov]

Lol when he realized that new tool doesn’t work for this type of brake 😂

[@matthewryan8364]

Look for a ratcheting caliper spreader, I saw them on amazing for $40ish life saver for real I got mine while working in an auto shop and it is a life saver

[@zaidcapone]

ma maan

[@reborn9508]

Hey fam!

[@jascal8437]

you dont think you bent a shiter rod? Love the evo content

[@jorge5032]

I feel like a Supra is coming or something like supercar just like drew

[@subaruadventures]

had to laugh, will use a towel so i dont scratch the surface. lol

[@keithmccormick1161]

You can figure it out man...

[@mikelewer]

Devin, my daughter is 4 months old and when we watch you at night she smiles like crazy at you. Gunna have to beat men away with a stick later in life because of you. 😂

[@acef_performance8416]

Vacuum leak on the Subaru

[@ut748]

I've asked Maverik to start carrying it numerous times, always no was the response from them. I don't know why. We used to have one up by you, now nothing.

[@vintilaandrei8091]

The Evo 8 rebuilt

[@kevincintron5615]

Build a WRX broo ❤️

[@victorveleta5064]

You should open up your own gas station and have e85

[@Adrenalinedrivenmedia]

Hit up Bryan and Steve at Atomic Race Works.........

[@AmandaRaeJean]

oh my lanta. 5 hours? my hubby would of lost his shit at hour 2

[@brockshouse4893]

Like the video so our man can buy another pair of pants

[@Smokingaces808]

Like for your ripped jeans 🤙🏼

[@jimvalerio6647]

I'm sure it's something ez let's all wait and see lol it happens

[@fs0c1ety_bs92]

bro that subie needs mags help her

[@andys_evo8]

“The man who asks a question is a fool For a minute. The man who does not as is a fool For life” I think you should get some proper advice on that transmission. You’ve already smashed it and left your comfort zone so far behind with this build. There is no shame in admitting defeat, especially with something as complex and important as a transmission.

[@andrewbraga8896]

Subie

[@Grooove_e]

Here in WI we have E85 all over the place. Lot of people with FlexFuel vehicles here for some reason Edit: Isn't every car a point A to point B car? Even it its on a track you want to go from start (a) to finish (b). Some cars just do it quicker than others

[@superloudublin4787]

You look like jocko willink.

[@marcruales8050]

Now you have to do a “how much a KZbinr makes for 400k subs...” you didn’t do the last one now you gotta do it this time

[@itsjustdylxn4896]

Noti gang gang

[@mikeb5105]

Face it we all knew this would happen- should have never started making this a SEMA build. Can’t say anyone is surprised

[@juangouveia8098]

what a hater!