THE FOX OF 50 SHADES : PREPPING THE PEOPLES FOX FOR PRIMER

We're getting closer to paint! In this video we will be taking the door panels off, removing window trim and pulling some dents PDR style!
LINK TO SHIRTS teespring.com/stores/brew2l
SUPPORT THE CHANNEL BY USING THIS LINK ANYTIME YOU NEED ANYTHING FROM LMR👇
LINK TO LMR HOMEPAGE latemodelres.to/BREW2L
Send mail to: P.O. BOX 900 Ashford, AL 36312
You can order all your Amazon needs through this link while supporting the channel amzn.to/2KvzVEl
INSTAGRAM / brew2l
BREW2L MUSIC: Music For Gear Heads open.spotify.com/user/1271816...

[@MarreroBuilt]

Can you please let me know if i should scrap my fox? i have so much rust and no one wants to help me fix it (Weld it) mainly in the inner fender parts i have contacted many people and they don't want to work on it im hopeless i have videos on this account and awesome videos! i watch all of em. Thank you.

[@miltonwood5932]

Lmr sells inner fender aprons. Buy a set, drill out the spot welds and put it back in and weld it

[@bobfalfa76]

ricardo m Don't ever let not knowing how to do something make you scrap a car. If you need a particular skill to get your project where you want and invision it, learn it. It'll open up a ton of new possibilities for you and future projects. Learning to weld is key, don't give up.

[@BREW2LFOXBODY]

I know it’s tough not having help. Before I scraped it, I would at least try to fox it myself. A $100 welder from harbor freight can do what you need. KZbin and google the hell out of it. Anything can be saved if you want to put the work into it. Hope you can find a way to save your fox! Please keep us posted. I’ll pin this comment in hopes that someone around your area sees it and can help. 👍

[@4eyefox]

Well its rough but it's a start to learn. I would say getting a doner car might help your cause. I had an 83 and its hatch was rusted and I'm glad I got rid of it and bought my 86.

[@TheLostSoA]

+1 on busting out the welder and trying to save it. If it's already rusted as bad as it sounds hit Google, KZbin, books, etc. on rust repair and use it as a learning experience, what else do you got to lose? If you can fix it you've got real pride into it and experience from it. If you're not able to save it, it might be time to think about scrapping it, or maybe find a clean roller and swap the good stuff out. Either way, good luck with whatever you decide man, really.

[@calikev3528]

How too videos are the best

[@lupemontanez2017]

AWESOME...AWESOME INFORMATION. LOVE THIS FOX CHANNEL.

[@BREW2LFOXBODY]

🙏😎

[@briandubbeld5665]

Don't apologize for this video! I enjoy your videos because you are covering very important things on your how to videos 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍man you guys are really doing great job

[@BREW2LFOXBODY]

Thanks brother 🤟

[@black88lx]

Bro this is seriously such great content. This isn’t about how to restore a classic Fox body mustang back to museum quality original condition. This is an average joes “how to” on how to attain a beautiful car that will command the respect of your peers and give you something to be proud of. All while doing so incredibly affordably! Keep it up man. This is a lot of work , not only to take the footage and teach this. But to edit this , and create this and consistently post this , its just incredible man. This is great for the hobby and I love watching your journey. Just motivates me to get started on restoring my first car 😎. My 88 Gt. I really can’t wait to see your car done man. I wish you lived closer so I could helpb

[@BREW2LFOXBODY]

I appreciate the kind words 🙏 it’s definitely not the easiest thing to juggle everything but comments like yours keep me motivated ✊ thank you for your support 🤙

[@lifewithanxietyeveryday5897]

I really want to build a fox one day can't wait to see this one done

[@elmostong1865]

That PDR is BadAss! Great job

[@BREW2LFOXBODY]

Thanks 🙏

[@kennethelliott2267]

Man it moving along!! And never mad about how to videos. Even if I already know there someone out there that don’t. 👍👍

[@BREW2LFOXBODY]

Thanks brother 👌

[@JDWorkshop-wn9tt]

Always good info on here

[@FoxcastMedia]

The how-to videos are awesome, best way to learn. She's coming along brother!

[@BREW2LFOXBODY]

Thanks brother 💯🙏

[@appalachianfoxbodysaaronau3257]

Caleb I came through your neck of the woods Sunday on the way back home from Memphis. If you would have been there I would have stopped and seen you.

[@FoxcastMedia]

Aaron Autry Man I wanted to hang out brother, hope you made it back safe. We will link up soon

[@appalachianfoxbodysaaronau3257]

Mama says that door channel molding is the devil!

[@BREW2LFOXBODY]

Exactly! ☝️💯 👿

[@GearHead704]

You've got to remind Andrew like I keep having to remind myself that it's just BREW2L now, not BREW2L Vlogs 🤣

[@BREW2LFOXBODY]

GearHead704 He won’t ever learn.. lmao 😂

[@mustangmarty8491]

Man BREW2L, I don't know if you know how much you help us, for me i really appreciate it 👍 And i hope you keep making these videos because it gives me thing's to watch during my day. Keep'em coming. 🇺🇸

[@allenlane5018]

Can’t wait to see the paint on it.

[@braquemathson1991]

Solid video! Keep’em comin!

[@mustanlab302]

Weld up that antenna hole

[@MorbidThrasher666]

I need that pdr for my bottom of my door from a stupid shopping cart from my old job that hit my door.

[@BREW2LFOXBODY]

The kit I got works really good.

[@coreymoseley6710]

Should just strip that roof with some 80 on a buffer then go back over it with 180 then 320 on a DA since it's got spray paint on it, but either way great video man

[@BREW2LFOXBODY]

The spray paint has been sanded off, the blue paint underneath is good on the roof. The sides of the car were not that way.. that paint was gummy for some reason.

[@kevinneves1796]

right on she's getting there for your quarter glass put 2" tape from the inside lay paper from the out side take a razor cut access paper off right along the opening just looks much cleaner and the fresh paint wont hurt

[@BREW2LFOXBODY]

Back masking 👌 that’s probably what I’m going to do. In the hatch too.

[@kevinneves1796]

@@BREW2LFOXBODY ya us Canadians call it back taping lol man ive been so busy havent touched my fox in over 2 months

[@BREW2LFOXBODY]

Hopefully you can get some free time soon brother!

[@BackyardBMX73]

Hell yeah! Makin progress!

[@Raptor_428]

Great video you should do videos for LMR 👍

[@BREW2LFOXBODY]

Lol, we are actually doing a video on a product for them tomorrow 👌

[@nothanks5652]

93 they changed the plug layout for some stupid reason they don't have the two plugs for the windows and door locks so it makes pulling the arm rests a bit more of a PITA.

[@BREW2LFOXBODY]

Really? I had no clue. I’ll have to research that. Thanks for the heads up 🤟

[@nothanks5652]

both of the 93's I've owned over the years didn't have them. May have been changed in 92 but not sure. all ways pissed me off when I had to pull the panel. you have to unscrew the switch connection to the armrest. since they don't have plugs.

[@appalachianfoxbodysaaronau3257]

Some of the 93’s do and some don’t. I had two that were totally different. One was like the style you are talking about and the other was like this older style. Both were 93 but one was a notch and other a GT.

[@mikegay8511]

Progress! I've seen that dent puller on Facebook. I want now since you got that. Where can I get mines?

[@Dedow8TheMCPimp]

Love this channel

[@gregcook96]

Looks good ,one step closer focus on the prize 👍👍

[@thunderbizcuitj5.018]

Awesome content! Keep on keeping on!

[@bobfalfa76]

Always great info man, I hope some of the younger guys pay attention, they can learn a lot by watching you👍

[@BREW2LFOXBODY]

Thanks brother

[@RPJs-Cuisine]

Excellent video brother!!! I will be doing the same sooner than later. I work at a Body Shop, but zero Foxbodys come in. So all this info is very valuable! 👍 BTW, i sent u a Foxbody Video via e-mail. Dont wanna sound like a groupy. But excited for u to watch it and get a reply. Good Stuff Broski!

[@BREW2LFOXBODY]

Thank you, I’ll check it out

[@albundy7239]

How to is a very important video to make. Putting it all back on is the most important video to make lol

[@BREW2LFOXBODY]

Agreed thank you

[@ejsvt2956]

Moving right along! Where did the dent puller come from?

[@ezcondition]

on rusty headed screws, place the screw driver in position and use a small hammer to give it a wack. it usually shocks things free and the screw will come out easy. i do that to ever suspect looking screw or bolt head. i'm the type that tries to save ever nut, bolt, clip, screw, wire looms etc.

[@foxbodyradicalrag5411]

Great video, your moving right along on this project

[@cheesegratercheesehead6133]

cool to see dent puller in action. hope u and drew keep it up, love the stuff u guys do

[@ryanpatrick3347]

Hold up Andrew I think the man does know what he is talking about that's why we watch lol. Looking good guys keep up the good work 👍👍👍

[@BREW2LFOXBODY]

Yeah Andrew ☝️😊

[@SL10VIC84]

Love your videos man!

[@joedirt7589]

Always in the first hour

[@scottpenegor1523]

Ahhhhhh primer. The point in the project you feel your getting somewhere.....then it shows you where more work is needed.😪

[@danawoodall8106]

Do you like the SVO foxbodys

[@BREW2LFOXBODY]

Love them

[@chidrole]

👍🇨🇦

[@joshua_irving93]

Coming along good, I'm sending a package out for you and Andrew today, I'll message u the tracking number on Instagram

[@mikej5131]

Lookin good.. Have you decided on an engine yet?

[@BREW2LFOXBODY]

Still on the fence... but I do have something in mind.

[@bryanroupe8646]

Hey look its ET 🤣 JK

[@zaneriley316]

You should stick with that mustache. Definitely makes you look distinguished.

[@BREW2LFOXBODY]

☝️😎😂😂😂😂

[@joeyrolle6568]

I see you stopped showing the viewers what your spending on parts for this "budget build" because its gone way south of "budget". According to this video you've got two brand new front fenders and a brand new front bumper coming for this car and whatever else you plan to buy brand new for this car. Ive been following this build and I can certainly say you never showed or even mentioned what you paid for these items but I can assure you its certainly not "budget". Long story short here....restoring these cars or even making them looking presentable is certainly not "budget" by any means unless the car is already in great shape when you purchase it. This just shows that you can save a few bucks when taking on a project of this magnitude by doing your own work but when it comes to having to buy new parts certainly nothing "budget" there. So much for this being a "budget build". You also never showed or even mentioned what you paid for the cobra body kit. Last time i checked there is nothing "budget" about purchasing a cobra bodykit for ANY mustang, no matter whether its second hand or brand new. Nice try buddy but even a blind man can see this is NOT a "budget build". Nice work so far however.

[@BREW2LFOXBODY]

The budget has slipped some, not going to lie. But it’s still within the range of a budget built imo. Like you said, nothing is cheap when buying parts. I’ll look at me receipts and talk about it in an upcoming video. FYI though.... I’m not intentionally withholding information from anyone.