The Hottest Amazon Foam Cannon In 2024! (BEAR FORCE Foam Cannon)

[@johnneidert5777]

Bought one several months ago. Trim the tube as need3d to allow the weighted ball to fall to the front or wherever you want it to fall. Decent enough, its still in third place behind my MJJC Pro V2 and Griots Brilliant Finish so far as performance is concerned. No jank in mine.

[@JamieTheCleaner]

O trim the tube good tips 💪🧼

[@altillman1448]

Guaranteed everyone experiences the foam cannon upper portion of the clear adjuster knob and lower screw on clear cap cracking like all the other clear plastic upper/lower models on the market. Something about the clear plastic uppers formulation for parts that come in contact with the metal upper screw or lower fitting piece cause it to become brittle after repeated use. I've had 3 different versions i.e. Raincovo, Bear Force, and Power Town. Ended up frankensteining these specific upper parts from other cheap models that were not translucent and have no further issue. All of the ones I purchased function and work just as good as an $80+ foam cannon using an electric Active VE52 pressure washer.

[@davidbram]

AR blue for the win!

[@cebasmb8250]

All you need is a good pressure washer now 😆 🤣

[@snaky115]

Optimistic question - Can you disassemble and show the foam maker replacement procedure on video for this newer Bear Force cannon?? The older model's foam maker bit cannot be unscrewed no matter what i tried. 🙃 (I probably accidentally corrosion welded it shut after a bad weekend)

[@barrybij8079]

Im disappointed you were not reviewing a wheel cleaner😂

[@JamieTheCleaner]

😂

[@micklioune1080]

I prefer the AOCISKA Foam Cannon; effective, inexpensive, and beautiful

[@wescat2]

All clear. For that price wouldn't care.

[@Ecdetails]

He said jank send that back bro - mine is sooo good haha 😂

[@JamieTheCleaner]

I always get the janky version bruh 🫠💪

[@Ecdetails]

@@JamieTheCleaner send that trash back looks like griots before I fixed it

[@DetailsNMe]

😂

[@wescat2]

@@EcdetailsWhat did you do to fix yours? Mine is underwhelming.

[@RCdetails203]

@@wescat2 what pressure washer are you using? I got the little ryobi 1800psi and my bear force didn’t foam that good with the 1.25 orifice but once I swapped a 1.10 in it it foamed up really good check the short video on my page of it paired with Adams mega foam

[@charlesbrasington7599]

The back piece is suppose to adjust vertical and horizontal! The tension on it is really hard

[@JamieTheCleaner]

Alright I’ll keep playing with it and loosen it up lol

[@onrdetailingnews802]

You got that Kia telluride clean in the cut 😅

[@user-nv5sv4jb7b]

That aluminum step you are using for a table, could you show us more and tell us where we can get one . Thanks.

[@flecky74]

The spray pattern does adjust from horizontal to vertical its just super stiff, thought i was going to break mine until it eventually moved. Still trying to get best results out of mine think i will try the 1.1mm next. Great value for money cannon and looks great on the shelf. Thx for the review.

[@JamieTheCleaner]

Alright thanks 👍 Yeah I might go ahead and try the 1.1 trim the tube some and this thing should be golden

[@esadetails]

Can you please do a video on how to fix the MJJC foam cannon. I have V3 and its acting funny too. I changed the filters and cleaned. I ran some Green Star through it so it can clean but still not throwing out the suds.

[@nickwarren5800]

Yes Jamie do this video. I have a V3 with no issues at all but would love to see it broken down with a before and after spray test

[@user-yh8hx6wr9f]

loving these quickfire reviews Jamie, keep up the great work! also, are you still using P&S absolute as a drying aid? I'm really tempted to try it out (only as a drying aid, i never do rinseless washing as water is never an issue in my country) after watching your short on it

[@JamieTheCleaner]

Yep my go to drying aid 💪🧼

[@user-yh8hx6wr9f]

@@JamieTheCleaner good stuff man, i'll get some ordered today :) thanks

[@Enthusiast_detailing]

So far my favorite foam cannon is the sooprinse foam cannon for $20

[@DetailingMadeSimple]

Great review Jamie! Foamed good but not great! Definitely better than most foam cannons other sell at a $50 price point. There’s some Jank to it ☠️🤣

[@FredShramovich]

Not bad for a back up or for a wheel and tire dedicated cannon.

[@JamieTheCleaner]

For sure 💪🧼

[@ChiGalKMcAcura]

I was thinking same. I did grab an MJJC for my intro to foam town.

[@DAT-TEXAS-DUDE]

I have a bearforce foam cannon but the first ones made . I got mine 4 years ago and its a frost white looking color still you can see the chemicals

[@kristofferpence]

I tried one from Astro AI. Comes with a 1.0MM orifice, homely pretty shocked for the price!

[@jamescharlton924]

I have the MJC one il stick with that

[@MyGuyKirby]

You had me at the start, who needs instructions….

[@hippopotimusstew]

Don’t forget to use code Jamie10 at your mom’s house

[@JamieTheCleaner]

😂

[@onrdetailingnews802]

Great 👍video buddy tfs 👍

[@RCdetails203]

Mine came with 1.25 and 1.40 for some reason…once i put a 1.10 in it put out some really thick foam I put up a short on my page of me using it with Adams mega foam

[@thesamsquatch5224]

Bear force is a pretty good cannon for the price, I think Eddie got a better rendition

[@seashackf1]

I think we may have reached peak foam cannon. MTM still a favorite despite its ugly bottle. Griots may be better, but I’m not a fan of the insert to control dilution. I would prefer a dial like the others. I do like the option for a small mouth bottle on the GG so I can use different size water bottles and have multiple for different soaps. The MJJC may have better foam than the MTM, but only because it uses more product. That clear bottle with it owns thread is a hard no. You have to buy from them when it breaks and a clear hard plastic bottle will break. Thanks for testing all these so we can be happy with what we already have and save our money by not chasing something better, which it may not be.

[@pantac4493]

You don’t have to use insert (metering tip) on the Griots, it’s an option if you want undiluted soap in bottle so you don’t have to mix it

[@trevorgwelch7412]

Rolls Royce use liquid Ivory body wash shampoo . Try it 😊

[@brokentradgedy]

Lol I remember cars with keav reviewed this and I was about to get it until I saw it going for 40 bucks and just bought the MJJC v3 instead if I was spending that kind of money

[@wescat2]

Bearforce was $26 till the KZbin rounds. It'll be $70 by next week 🤣It's good for what it is. Stainless is a bit more, but worth it for a backup or Alkaline only since it foams thin.

[@JamieTheCleaner]

Dang $26 is definitely epic

[@TMCHL]

Got it from Temu for £2 must say well worth it 😂👍💥

[@Rohit.Kapoor]

Bro, what kind of gloves are u wearing..nitrile?

[@JamieTheCleaner]

Yes harbor freight 9 mil 👍

[@Rohit.Kapoor]

Thanks

[@LasseJohannsen1]

My cap broked after few washes …. To thin plastic they use😵

[@AmirAbdullah]

Bear force is so hit and miss for me , some products are great and some just are built real bad.

[@1stfrompuertorico568]

Nice!!!

[@JeepJL]

It sounds a little... Don't know how to explain it... Weird.

[@JamieTheCleaner]

Yeah

[@justinschuyler]

I can’t get behind these cheap Chinese foam cannons. Or even expensive Chinese ones like MJJC lol

[@pantac4493]

Copied design is more accurate, many official products are made in China

[@DAT-TEXAS-DUDE]

Which ones do you have or what country do you support if not products from china😊

[@justinschuyler]

@@DAT-TEXAS-DUDE I use the MTM Hydro. Also, there’s a huge difference between companies developing products and having them manufactured in china and chinese companies blatantly ripping off other companies’ products.

[@Weakest_Bulgarian]

Was thinking of getting until I saw the lid part leaking like a spigot. Hard pass