The Husqvarna TS354 Garden Tractor. A Long Term Review. 100 hours and 2 years later.

Although I got this tractor for 1/8th of retail, I wanted to revisit this thing to talk about the good and the bad. With Mowing and gardening season right around the corner it seemed like a good time to do so.
Clearly my GT has had a LOT of upgrades to make it a work horse here on the homestead. Over all, I've been pleased with nearly everything. The fuel consumption is lower than with the Briggs engine, and the K66 Transmission has only given me one issue.
These things are not cheap, but if you are in need of a true garden tractor to handle a large yard, then maybe this is the unit for you.
Buy Farpoint Farms Shirts, Mugs, and Stickers Here:
Teespring: farpoint-farms-4.myteespring.co/
Like The Channel? Consider becoming a donor here:
Patreon: www.patreon.com/user?u=10995654
E-mail me here: [e-mail]

[@brad7670]

Keep the garden tractor videos coming. I have 3 larger tractors but love my simplicity sunstar with sleeve hitch for fixing the driveway after a heavy rain. Garden tractors are so much fun.

[@steedandersen]

As a Husqvarna mechanic at a dealership I have had experience with the so called frame weakness. What I usually find is cracks in the frame around the rear axle mounts. This is caused by operators slamming the pedals forward to reverse without coming to a complete stop. I have seen John Deere 165's do the same and they have a MUCH thicker frame. The TS is the tractor I told my father to buy when he needed a new one. P.S. I love your radio videos too.

[@jman490101]

Yeah I agree some ppl just don't understand "it's a tractor not a car or truck". I found the frame work on a Husqvarna and John Deere are about the same but definitely better than a sears. The Husqvarna I have has a 27hp & my neighbors with their John deere garden tractors are jealous. I've pulled several things that their John Deere couldn't but you have a great point.

[@Dboyquicks10]

I also work at a Husqvarna dealer and I believe some of the blame for cracked frames could be from the weight of the deck.

[@rogerthat.9105]

@@jman490101. A Husqvarna is a Sears……. Do your homework, my man. I bought a YT 3000 from sears in 2013 it says Husqvarna built right on the side panel under the seat.

[@Joeverland]

As a brand new owner of the current generation I am relieved to hear about your long term experience, especially with reports circulating about frame issues. Thanks.

[@FarpointFarms]

Thanks for sharing!

[@tkskagen]

Do you ever miss the "Ol' Grey" GT6000? Have you thought of compiling all your Mower Maintenance Video's (Carb Cleaning, Recoil Rope Replacement, Deck Cleaning, Blade Sharpening, ect) into a "Tune-up & Maintenance Video"? Just gather all the "snippets" and maybe add some New Footage! Great for all of your viewers that "can" fix-it themselves... 🖖

[@bigsonslawncare]

She looks like a winner 🏆✔️💯💪🏽

[@meagenb4968]

Awesome! I love the Ag tires. She's held up well. Been well used but also equally important, well cared for...which is the FPF secret sauce you share with us all on every video. One of tbe simple rules of life - if you want nice things you have to take care of them. Thanks, Erik. You and Jenn be well.

[@TekGuy56]

Following your lead, I put a JB Jr. on my TS348xd but I DIY'd a joystick control system so that it acts like a Bobcat (makes it easier for the family to use it). Like many others, I want to thank you for the update and especially for the earlier videos. They were very helpful to me for selecting a lawn tractor and building a practical and cost effective solution for my little homestead.

[@Glenn_123]

Great video Eric thanks for the update!! Keep them coming.

[@tinkmarshino]

I got a husky for mowing my yard and hauling things around.. it has the brigs 22 hp motor. I have had it for for three years now.. never a lick of trouble.. Though I have a bad back and hips and this baby sometimes is like riding a bronc.. just bang and jarring me around.. I am thinking I might try and put some sort of suspension on it this year.. and maybe some better rear tires.. I got it stuck just two days ago doing the first mow of the season.... My fault it was wet and I new better.. Thanks for this "lookie here" video.. It gave me some ideas.. Carry on son.. you really have turned this YT thing into a nice couple of very interesting spots to come and send a little time on the farm with you.. my family owned a ranch when I was younger.. I miss those days..

[@sevenliterbronco]

I've noticed the solenoid clicking noise on my TS354D. I have found that if I flip the switch and it clicks, I need to let tractor move just a bit for the diff lock to lock in place. Like a shift on the fly 4wd system on a truck. I've had no problems disengaging. I appreciate the updates and great info on your channel.

[@Dallas-Rife-UDX-347-Tennessee]

Definitely a Farpoint Farms customized tractor . Glad to see it is working out for your needs on the farm . Great review . 73’s to you Erik

[@FarpointFarms]

Thanks, it does look kinda beefy.

[@buildingalegacypa]

That is a great deal you got on those sleeve hitches. We never had a Johnny Products scoop (which is a an upgrade), but had the Craftsman scoop and was amazed at what we were able to do with ours. Our Kohler V-twin drinks gas also at an alarming rate, we understand what you are talking about. You have some nice upgrades on that tractor. Nice job on the video, keep them coming!

[@FarpointFarms]

Thank you for the kind words, my back is getting better so I am eager to work on more mower videos.

[@jman490101]

I definitely agree. Husqvarna tractors are definitely the way to go. Mine is 6 years old GT48XLSI (discontinued😒) with the same battery, same mowing deck, grass catcher all original belts. Never had a problem with the mowing deck, smart switch, or the 27hp Briggs and Straton engine. I love the locking system for the back tires, drive system (hydro), the smart switch (don't have to worry about losing a key). I've pulled several boats, a boat trailer with tons of wood on it, a swing set over, branches out of a willow tree, 14 cubic ft trailer with big rocks & full of sand. Never going back to craftsman even though I had one that lasted me 18 years. Great video Eric.

[@FarpointFarms]

Thank you- we also had one of the older xlsi(52") and used and abused it- This was our replacement one- they are tough mowers

[@alexking7365]

Morning Eric

[@paulkopacz5051]

I'm waiting at home for mine to be delivered today, they are late. I like the mods you have done and the first thing I'm adding is the wheel spacers, I need the stability on my hill.

[@FarpointFarms]

You'll really like the spacers. I have really enjoyed using this tractor. It's a workhorse!

[@jimmycarter9099]

Nice I got two ford lgt 100 and lgt 145 and I have did a bunch of rigging my ford lgt will hold a 4 box blade never had the money to buy a nice tractor but I am proud of what I got the nice thing is I got about 5 years before retirement new tractor for me hey thanks for a nice video you did well with your tractor

[@FarpointFarms]

Use what you have, that is what a lot of people seem to forget. Make it work for you

[@brianphilbrook5262]

Nice machine. In October last year I sold my husqvarna gth200 with Johnny Bucket Jr and we got a JD 1023e subcompact.

[@veteranveteran9915]

Love it! I have a TS348 💞

[@FarpointFarms]

also a great mower!

[@CrabgrassFarmer]

Thanks, I have this tractor and it's been great. I hope you do a video on changing the differential fluid sometime. I've been scratching my head as to the easiest way to do it.

[@handsofgodd]

seen a video on the tranxaxle assy fluid change, and you had to remove the assembly from the tractor, and they dont have a filter, they say it doesn't need to be changed for 1000 hrs !!!

[@CrabgrassFarmer]

@@handsofgodd Thanks for the reply. Yeah, I couldn't figure out how to do it without a TON of work. Glad to hear they say 1000 hours, or basically the life of the machine.

[@homesteadspirit9209]

On our farm we have about five farm tractors or so but also three garden tractors. Those get used more then anything else we have especially for fixing the driveway

[@harvdown]

I have a new yth22v46 with a snowblower 42 inch with winch. New battery drains when winch is used often, was told to get a deep cell one?. total cost in Canada dollars 7900 all in.I have a small 6000 Sq foot yard so should last for along time along with the 6 feet of snow we got this year.

[@rEdf196]

Husqvarna Dirt bikes were awesome in the late 70's

[@tedschmitt178]

I seriously considered one of these (348XD for the smaller deck) but went with a Cub Cadet after hearing about the frame issues, and they stopped making the 348.

[@trucks_n_tractors_6335]

Good video! I have my Massey 7 as my main garden tractor it’s a bit small as far as old garden tractors go but is built very heavy I put a 212cc 6.5HP predator engine into it and it will run all day with plenty of power because of the gearing but it will run all day on about 1/2 a gallon of gas

[@FarpointFarms]

That is great gas consumption. The Husqvarna is a fuel hog

[@chrislovett6120]

I’ve had mine since 2019 and have 90 hours on it. I’ve got about 2-3 acres to mow and it’s been flawless

[@FarpointFarms]

Glad to hear that you have had great luck with yours

[@bobjones9727]

I regret no having bought one of these a couple of years ago

[@montanawhite5699]

Nice review, tired of seeing people cut the grass once and making a review video saying it’s great.

[@FarpointFarms]

I am at almost 200 hours on it and I still love it- Just wish it was better with fuel efficency

[@montanawhite5699]

@@FarpointFarms that’s good to know, I’m looking for a mower, don’t want to really go commercial grade but seems like residential is made for like 40 hours a year. Right now I got a 1989 Honda 5518 garden tractor. It would be awesome if I could find any attachments for it but here in Hawaii there is nothing. No one sells category 0 parts. And buying one online the shipping costs as much as the item.

[@ronleblanc9832]

Nice garden tractor like the rear tires are they 4 weeler tires

[@wyattshelangoski1359]

Info or video on frame reinforcement?

[@wildkatz84]

I want to get some G5 Gator blades for my TS54D but I'm not 100% sure if Oregon makes them... it looks like they make Gator blades for other 54" Husqvarna with stamped decks but not sure if they would fit the 54" fabricated deck of the TS54D?? (FYI - for all I know the stamped and fabricated desks are exactly the same dimensions underneath) Have you changed your blades out yet with anything other than the factory ones?

[@quantumphaser]

You shouldn't have any frame problems with that model, the LGT2654 is the POS one as my frame is currently broken. Hopefully can get it fixed this summer.

[@FarpointFarms]

I am hoping not, Husqvarna cheapened the frames and I am sure they are regretting it.

[@quantumphaser]

@@FarpointFarms Dumbest place to save a buck, ever.

[@RaceShop147]

CN you help with with ordering the wheel spacers, AG Tires & Wheel Weights for the tractor? I have contacted Johnny bucket about the loader but they do not sell the other items I need. Thank you for your support!

[@FarpointFarms]

Wheel weights came from Sears.... So, maybe try Amazon? Spacers are from a Jeep Cherokee 2000 model. Fit's perfect. Bought them on eBay. The ag tires also came from eBay. I try to buy parts from eBay when possible to support small businesses.

[@broken_bones_acres]

U still have the craftsman yt3000?

[@RaceShop147]

My John Deere 318 finally died so I bought one of these today. Loved the video, great stuff. Where did you get the dump bucket ?? I need one of those!!

[@FarpointFarms]

That is a Johnny bucket! they have a website and it's a great tool.

[@xxfaction6xx]

Didn't even know Husky made one of these

[@Dboyquicks10]

I might suggest that you have your valve lash adjusted. The Kohler courage and the 7000 series have adjustable valves and it might save your starter.

[@FarpointFarms]

Thanks for the tip! I have noticed it is hard to start at time. Wants to kick back and was wondering if there might be an issue with compression. I'll check it.

[@Dboyquicks10]

@@FarpointFarms there is a compression release on the cam. When your valve lash is to wide it can't crack open causing it to kick back. Set the piston 1/4" past tdc on the compression stroke and adjust both valves to .004. repeat on the other side.

[@dancomer1604]

Hello , Did you fabric the bucket, or is it part of factory bucket with added Hydraulics ?

[@FarpointFarms]

That's all stuff that I bought from Johnny Products. It's called a Johnny Bucket. You will love them!

[@jvburnes]

What is the model number of that loader? I can't find it on Gian'ts site. I have the newer TS 354XD with the 24hp Kawasaki.

[@FarpointFarms]

The loader is Johnny Products- they make some great products!!

[@sealevel1919]

Wish I knew where to get those 2” spacers

[@FarpointFarms]

Amazon. Look for mid 90's jeep Cherokee spacers. They work great.

[@jacoblanphear8131]

Cruise control is great for tiller and towing repeatedly

[@FarpointFarms]

If I had flat property it would be really handy but on hills it is just not safe

[@kenjohnson4605]

25 hour oil changes? First one yes, then 100 hours thereafter on my Kawasaki fr730v.

[@2326TX]

Find this comical and amusing. My neck of the woods, that is a riding mower, I've never seen a "tractor" in that size. I have a small compact tractor that I consider a light duty machine. My New Holland Workmaster 35, it's about the size of a car or small truck and it is light duty only. My T6 is a monster compared to a riding mower. Just can't figure out what you'd use something that small for. I know you're not picking up hay bales or pulling disk or brush cutter with it, but I'd really like to see these things at work. Just to see what they can do.

[@FarpointFarms]

Check out some of my videos on the garden tractor implements. You'd be surprised at what something this size can do. They are perfect for smaller homesteads like mine.

[@samsien9105]

Husqvarna has two problems 1 gas soline solenoid, 2 gas tank easy to broke down if sit on sun or snow for too long. that my problems found.😂

[@jamesculp3622]

My frame broke and the dealer has kept it past the warranty date and he now refuses to complete repair without me paying him $1500. This is has been a waste of $3900. Nothing nice to say about Husqvanna or my dealer.

[@FarpointFarms]

Wow! That is not good. I'd call a Corporate number and raise some serious stink over that bait and switch.

[@techguy9023]

How did it break? Just mowing?