The Key to building a Magnetic Motor

[@Danielm-hq3eb]

I literally found this channel this morning, subscribed, but thought it was dead, then I see a new video in my recommended. I'm so happy right now.

[@Motionmagnetics]

I'm glad to hear that. Thanks for subscribing.

[@Danielm-hq3eb]

Motionmagnetics you’re welcome.

[@tfbama68]

@@Motionmagnetics ~NEVER FORGET "BREAKING THE CHAINS" HEROES~ The evil power cartel have gone to endless lengths of crime, & false propaganda, major media, school/college manipulation, to stop you from knowing the truth... These AMAZING, BRILLIANT, "think outside of the (power-grid) box" minded geniuses, have ALL tried waking the WORLD up! ...plus many more.. ~Nicola Tesla, Stanley Meyers, Dennis Reed, Troy Reed, Paul Pantone, John Christy & Lou Britz, Joe Newman, John Bedini, Howard Johnston, Richard Clem, Daniel Dingel, John Searl, Thomas Ogle, Dennis Lee, Eric P. Dollard, Tewari, Adam Trombly, Paramahamsa, Dennis Klien, Parendev McKenzie, Muammer Yildiz.. WAKE UP PEOPLE ! SLAVES N0 M0RE ! ..& a special thanks- Edward Snowden, Julian Assange Please follow link and share, thank you 🙂 petitions.whitehouse.gov/petition/end-slavery-all-humanity-administration-needs-quash-suppression-independent-free-energies Your right to have FR€€~€N€RGl€$ ! Stop being SL∆V€D B¥ TH€ C∆RT€L$. ~PLEASE SIGN PETITION~ I am registered to vote, the reason it ended with only 6 signatures, is because those six I personally followed up on with are friends and family members. .. it is THAT controlled. The controllers of our internet are vested with the same ones that control our mainstream media. The ONLY way that we can accomplish this is to go door-to-door get addresses and signatures, and give them our emails in case they change addresses. In the short limited time frame that they give us 100,000 signatures in 30 days, to come up with ridiculous numbers in the amount of time before it's even VIEWABLE to others "which they control", it is the ONLY way for us,,- to go door-to-door and collect signatures so at a specific time frame we can present it to Congress & and DEMAND.

[@vunpac5]

I just discovered your channel recently, and started watching all of your videos. I've been working with magnets quite a bit just recently. I find all your videos to be very helpful. I appreciate all the work you have done, and the info you have shared.

[@Motionmagnetics]

Thank you!

[@stevetobias4890]

Love it when people open source ideas instead of looking to get rich off their ideas that are based on the principles of people like Tesla etc that have been around for a very long time. Thank you

[@tranceending5914]

I’ve been playing with the same concept, though mechanically very different. The solution really is a pulsed system rather than a closed array which will always seek equilibrium. While it may seem only a change of phrase, I believe the motor concept as most people visualise will never work. I believe the concept of engine, is where the answer lies. Your rotary shielding is basically a camshaft, the rotor, a crankshaft. The trick is finding the correct pulsing, while allowing the rotating crankshaft to produce enough force, to activate/operate the camshaft.

[@Quickened1]

The key element about what you are saying, is that you must derive the pulse from a power source that consumes less energy than what the motor itself can deliver, thereby achieving the much sought after, over unity... I have yet to find a material that will provide sufficient shielding to overcome magnetic field resistance, but am hopeful that there's something out there, which would make a permanent magnet motor possible... I have seen others achieve varying degrees of success using electronic pulsed timing, but am not aware of any that have achieved over unity.... Maybe someone has...

[@Motionmagnetics]

That's one way to go as well. I wish you success in your endeavors.

[@sinsemilla9876]

@@Quickened1 Could Bismuth work as the shielding?

[@dee5556]

So many on the right track...Good to see! Don't forget the power of a clamped collapsing electromagnetic field. Way more powerful than most realize. Your closer than you realize to success.

[@dee5556]

@@Quickened1 Shielding is not required with Trance Ending's concept. The pulse replaces the need for shielding.

[@MagneticBlueSky]

Hi motion. I've been playing with Raymond concepts and I give you a warm welcome. The way to modulate the magnetic fields is motion, so yes. 2 counter - rotation connected rotors and a spaced "outside" fixed iron shield might be the best solution. Thanks for sharing, there are patents on this type of shielding motors but few practical details available.

[@Motionmagnetics]

Hi. I like his channel and thanks for watching.

[@TallBoyGareth1]

First new video in a year 👏🏻 I’m excited

[@Motionmagnetics]

Thanks for your enthusiasm.

[@trench01]

I suggest u post in on other platforms that cant erase video. I assume many have ideas they all could not test. What you did was give inspiration and a stepping store to the right direction. People get too stuck on what the masses do that they dont try something new. Also the issues some say can be overcome. Congratulation and thank you.

[@Motionmagnetics]

Thank you. I don't mind people copying them to their computers, as long as they aren't monetizing them and making money from my work.

[@trench01]

@@Motionmagnetics I agree but most likely they wont. Plenty of people made money form Tesla work while Tesla died poor. Some people like how they are mentioned at all. The top youtuber makes million from playing someone else game while the game designer does not make a fraction the money, so figure. But then again everyone works and 1/2 their paycheck is taken away to be given to others. LOL Yet the masses dont say a world thinking the taxes go to make things better when they are used to make things worse. In the end its all in a state of mind of how one sees it. Keep up the good work. ;) Also Iron is a good enough shield and if they say it magnetizes then its insignificant.You can do it with spare magnets in youe home and try it out which needs adjustment I assume to make it as you want it. I think electromagnets help but those are all designed bad since they have a lot of loss due to magnetic friction. Now if you steal that idea i said and make money well you have your own guilt to deal with which does affect everyone to small degrees which shows in their personalities. But you are free to think about it.

[@samcomptonbk4583]

Old CRT TV's had a big piece of shielding on the back of the tube. That might work for your motor. good luck. I bought me a Creality 10s 300 on your recommendation: I love it. Working on some magnet ideas of my own.

[@Motionmagnetics]

Now there's a place you wouldn't think to look. Thanks, and congratulations on your printer. I really enjoy mine as well. Good luck with your ideas.

[@oudotcom]

Well done ! Hope you can test it out soon and let us know, how it works. Many thanks again. Regards, Stefan.

[@Motionmagnetics]

Thank you, Stefan. Much appreciated.

[@premkumar-ty8ot]

its gud to hear from you after so long. I should appreciate you , because from sooo long your are coming with great ideas that helped me to figure out a way to make a machine that run purely runs on magnets.........we cant make these type of things with magnetic shielding because they provide better path for flux.....instead of repelling them .....to make a device we need magnets that are slightly different magnets that regular magnets. we dont need monopole magnets, we just need to adjust the manufacturing process of magnets a little bit to make this kind of machine possible.......right now im making magnetizer to make magnets as per my own requirements.

[@Motionmagnetics]

Thank you. Much appreciated.

[@Saleca]

even thou i am subscribed i lost your channel for a while, i really appreciate your attempts on the unbalanced systems.

[@Motionmagnetics]

Well, I'm glad you found it again, and thank you.

[@steve-o6413]

What a unique concept, thanks. I don't know how much torque your motor would produce since it's a balanced system and any torque would throw off the balance...

[@Motionmagnetics]

Thanks. I couldn't tell you exactly, as it would depend on many factors in the construction, but I believe it would work.

[@dee5556]

@@Motionmagnetics Not the least is the attraction of the magnet to the shield!

[@michelmorel9208]

I did some tests with metal and magnets, what I found is that the metal eventually becomes somewhat magnetised and the attraction property of the metal eventually stops as it becomes too magnetised by the magnet. But don’t take my word for it, try it :)

[@Motionmagnetics]

Yes, you definitely need to be selective about what you use. That's why I didn't give a specific recommendation.

[@jrchicago9216]

Love to see this working. I like this concept. If there is still a sticking point, perhaps a synchronized trip gear instead of a pawl for harmonized movement directly between - like a watch gear set.

[@DrWho007]

Bruv.... I was getting worried... Glad you are good and back uploading. I was really scared.

[@Motionmagnetics]

Thanks, and thanks for your concern. I'm still here, I've just been preoccupied with other projects.

[@aw11roman]

Awesome to see you making videos again!!

[@Motionmagnetics]

Thank you!

[@MrRXR1]

How about the shields fixed to the rotors with fewer moving parts. also you can angle the mags to reduce the field on the backside :)

[@gnosisdg8497]

what shielding materiall are you referring too ? can you please name it or them? i will built and let you know how it goes !

[@WilliamEades_Frostbite]

I'm working with Mu Metal for shielding. Don't know if it's the best out there, but it's what I found.

[@Motionmagnetics]

Mu Metal. Something similar to what they used in the magnetic switches.

[@ryanjamesloyd6733]

like this design idea. This sort of thing has been on my mind lately, blending gravity and magnet concepts.

[@Motionmagnetics]

Thanks. Sounds fun.

[@ryanjamesloyd6733]

@@Motionmagnetics I also found This an interesting concept, where dude uses an electromagnet to get past that usual trouble spot. That has shifted my focus to examining where perpetual motion designs fail, and you can just give them a little bump in one spot to take advantage of everywhere it Does work. kzbin.info/www/bejne/q2PQoXSpoKuCq5Y

[@JetCooper3D]

So glad to see your work again! When I’m back at work, I can help. I am from the film industry and have access to 5 axis CNC plus the best 3D printing that technology has to offer.

[@Motionmagnetics]

Thanks. I appreciate the offer.

[@StoreRunDotCom]

I have a plastic bicycle wheel mounted in a square wood frame with a crossbar to hold the axle that I have put various magnet configurations on, starting with a bedini SSG setup and a bunch of other configs. I am thinking about a HJ setup with magnets getting progressively closer together on the wheeel, and one of them mag switches mounted on the frame so that i can turn it off in a way similar to your setup at 4:20 - so I know that I will probably have to switch to iron not magnets but then I am thinking I am not going to get that much pulling power out of the mag switch and iron setup. Imagine magnets would work if you will, so that setup I make it where I get the most travel out of my wheel by spacing the whole iron or magnets as far as possible along the wheel... when it gets to the end of the travel, I have a servo switch the magnet off, then switch it back on once they have passed. that is how I could run one of your proposed setups as a full experiment. I have been thinking about this and always check back to see your progress as you are the most advanced guy on this subject. I would like to hear your thoughts on my idea if you would be so kind. Myself, I put the PMM setup on the shelf, and have thinking of combining some electronics to aid in the goal of a self running motor, be it electromagnets or using servos to move magnets in order to avoid the inevitable lockup a PMM setup would encounter. Thanks and KEEP ON DOING GREAT THINGS! edit: the setup described would be the prime mover for the wheel, then I could wrap a belt around the bicycle wheel and a small pulley on a dc motor to generate the power to run some logic electronics and the servo. Yes its only overunity but including Bedini, do we really have a replicatable OU device that is reliable and viable? My goal is a machine that runs on battery power that the total stored charge increases as it runs

[@HWJJSCHUMACHER]

I WANT TO START NOW WITH A "V-GATE " MAGNETIC MOTOR

[@juanpablosanhueza39]

muy bueno tu trabajo sigue asi , la parte mecanica pra anular el frenado es todo lo voy a poner en practica un saludo desde Argentina!

[@inertproductionsalternate9114]

Hey man glad you're back.

[@Motionmagnetics]

Thank you.

[@inertproductionsalternate9114]

@@Motionmagnetics I was wondering if you'd be up for setting up a discord server. If you'd like I can set it up and give you ownership.

[@paulcollins7142]

Big Fan, can i confirm if you believe that the force to move the shielding is less than the torgues generated.

[@Motionmagnetics]

Thanks. I believe it's possible, with the right bearing and shielding material. That's partly why I showed the Magsquare in my video. With the flick of a switch, you can shut off a magnet with 400 lbs of pull, due to the shielding method it employs.

[@Tony770jr]

Interesting design. I hope you can get it to work properly.

[@Motionmagnetics]

Thanks. It's out there now, regardless. If I can't, perhaps someone else will?

[@bartswerts4694]

@@Motionmagnetics hi, love your channel 👌I’m interested in building this design, what kind of materials can I use for shielding? Ferrite?

[@doughunter3967]

looks like a great design

[@Motionmagnetics]

Thanks!

[@williamfranks7584]

I’ve just found my favourite KZbin channel

[@Motionmagnetics]

Thanks for that!

[@Mau365PP]

What is the power source of this machine? How much work can it do?

[@mizanimeysam2908]

great idea... great thanks for sharing.

[@Motionmagnetics]

Thanks for watching.

[@victoryfirst2878]

You are talking about Mu metal. Stuff is just amazing. Like your way of thinking using engineering. There are probably apps that can do a lot of figuring out for us all. Peace

[@MattandHolly920]

What program do you use to illustrate your videos? I have ideas but no clue how to illustrate them. Thank you for your inspiring videos.

[@Motionmagnetics]

I do most of the animations in Keynote. Thanks for watching.

[@codyquist4908]

What would you recommend for the shielding material of the stator? Why do you say magnets with a 300-500lb pull force are needed? (can this be accomplished with less?)

[@alexalexander3140]

OMG!!!! He’s alive!!!!!!!!!!!!!!

[@Motionmagnetics]

Alive and well. Thanks.

[@johneygd]

Why would you believe that he could,ve not alive? Are you believing that secret intelligence agency’s will go after him for his impressive experiments? Off course not , unless you’re stealing someone elses pattent create it on your own and selling it as a legit version from it’s original owner, but he is not doing that, But ironically enough the us goverment did say that the have the rights to take away someone else’s pattent if his/her device could harm other company’s or their economy,mmm.

[@jmackman]

Can plastic actually shield a magnet though?

[@ss-ou5ux]

nice ideaaaa......, hope it work... ...

[@Motionmagnetics]

Thanks. I believe it would.

[@JanMartinusSlootmaker]

Absolutely wonderful that you want to share your ideas with us. Greatly appreciated. Hopefully we or better u ;) can make a running motor and make this world a better place. Thank you.

[@Motionmagnetics]

Thank you. I appreciate that.

[@waynerd1]

Can anyone explain how a magnet is any different than say, a spring? On its own it doesn't do anything, until it is acted on by external force. It seems to me a magnet's "springiness" is interesting in terms of its invisible force, yet that force does not contain the ability to "create" energy, therfore is bound by basic principles of thermodynamics. And, just like a spring must be initially compressed, or stretched, to perform work, magnets seem to act much the same way.

[@Motionmagnetics]

A spring and a magnet are nearly as different as the day is from the night. You might consider reading Howard Johnson's book on spintronics, "The Secret World of Magnets". There are few people who ever explained or understood magnets as well as he did.

[@TotalFreedomTTT-pk9st]

If Power can be defined as the combination of two energies tension plus motion - it seems that Traditional Physics denies Permanent Magnets a 'motional' component - so for them the Magnet is carrying just one Energy - tension - and that is why - (I believe) that there is no way a Permanent Magnet Motor can be publicly demonstrated because it would 'prove' that a Magnet does in fact posses this Motional energy and thus "power" albeit a non changing static power - sort of like driving steady at 100 MPH and thinking there is no power involved - till you crash @ 100 MPH or a simple DC battery - also there are 'spring' motors as well using spiral springs and one way bearings with clutches - Georgian inventor Tariel Kapaladze. showed this on a video that was removed - Don Smith said where there is a square law there is over unity -

[@premkumar-ty8ot]

great work

[@Motionmagnetics]

Thank you.

[@panzerofthelake4460]

finally after soo long

[@johneygd]

Now he needs to show it and prove it.

[@johneygd]

Just built it and prove that it fully,reliably and permanently works,just prove it, we are waiting for it!!!

[@milanhlavacek6730]

Where exactly does this motor take its energy to spin?

[@JoaoKunha]

have you tried electro magnet instead of mechanics ? should have less issues with the time

[@3DLasers]

I can't seem to get my motor to go past the magnetic sticky point, how do fix it ?

[@andreasschmitt2307]

Normally it's done by a hidden motor or an air nozzle.

[@Quickened1]

And here's the million dollar question! What material is used for magnetic shielding?

[@anjonreyes3158]

magnet^^

[@Quickened1]

@@anjonreyes3158 been tried, doesn't work...

[@AlexanderA80]

Magnetic steel.

[@ebudmada12]

Is this working? Can I buy a finished working one ?

[@Motionmagnetics]

I haven't attempted to build a finished version. I just wanted to demonstrate the principle so that if something ever happened, the information is out there.

[@eclasimn]

isnt this configuration the same as using electromagnet? just the analog version

[@TrentTationnaiseXization]

Its been a while.

[@Motionmagnetics]

It has, indeed.

[@rickyfranks8163]

Genius!!!.

[@gunghoadventures871]

Awesome . Following 👍

[@eugen995]

I just love you!!!

[@arcustoms3340]

Mercury changes the playing field

[@Thomeeno]

As with all magnet motors this will never work, energy used for moving parts of the shield will be greater than momentum gained by non shielded magnet. Under physicall laws energy gained into system will be spend on gears which will move shielding. You do need understand magnetic force works as something like pull bar - energy is ballanced until something will gain power to move one and based on this second one.

[@samuelmorris4920]

is there anyway we can talk im from, india

[@capodad2u]

Looks like it would cog on first rotation. Magnetic motors using magnets and coils have already been achieved. Using many clever arrays of magnetic shielding and magnets has seen little successes. So build yours. No excuses.

[@StefanHartmann-hartiberlin]

Instead of going back and forth on the stator shielding, better rotate the shielding in the right frequency...could waste less energy...

[@Motionmagnetics]

Interesting thought.

[@glaysonmestre]

2:23 how name this tool magnetic switch? im living in brasil not find to buy help me , is possible construct this thing at home send me videos diy

[@serhumano1389]

si kzbin.info/www/bejne/pGrXi3x8m7JkatE

[@spikeccx]

Sheild matereal ?

[@Motionmagnetics]

Something similar to what's used in the magswitch.

[@spikeccx]

@@Motionmagnetics take one apart, think you will find no sheild but think it cancilation the magnet not sheild it Got my own idea for a motor

[@spikeccx]

@@Motionmagnetics drive your rotors with toothed belt from under base plate Then you can time the middel one to switch with internal cam lobe and keep all 3 to a set position you can ajust

[@panzerofthelake4460]

how can I remagnetize my ded magnedz? pls. halp

[@robson6285]

With a strong electromagnet. The same way they are made in the first place. A big capacitor gives his full charge in one big currentpeak to a coil around or above the piece of metal or ferrite or each material with a high value of remanent magnetisme, each material you want to make your permanent magnet from.

[@dee5556]

You need around a million amps in your coil but only for a millisecond. BIG CAP BANK, HEAVY GAUGE COIL LOTS OF WINDS. Fun fun fun!!!

[@robson6285]

No of course not, this one too will not work. It would be a perpetual motion machine. You reálly still think yóu will make that first working free energy device?

[@Quickened1]

Well, you definitely won't if you never try!

[@robson6285]

@@Quickened1 okay, that looks fair... (haha, sorry but okay, me too wonder if wonders still exists so that's why i ever subscribed and just watched. But only making it more&more difficult to see all interactions is absolutely not the way to that first time wonder)

[@Quickened1]

@@robson6285 ...I agree that he should not have posted the design of the machine without at least some testing or additional information. As it sits, it is totally theoretical, and from what I can see, it will not work unless there is some sort of material that will in fact "shield" the magnetic field, that I am unaware of! I have my own ideas for pulling off a permanent magnetic motor, but without shielding, the magnets will degauss in short order, rendering them useless. Electronic shielding is possible but he made no mention of electronics in this design...

[@HomicideHenry]

I wouldn't call it a perpetual motion machine per say since the "power" is based on motion. As long as there is motion it will run. If there is no motion, nothing happens. Because of friction, and losses due to vibration and sound, etc--- it'll run down and stop. A system, no matter how simple or complex, will always favor less and less. The question really is, "How efficient would such a system be?", and that's yet to be seen. Considering internal combustion engines are 30% efficient, that's a good baseline to compare it with. I'd imagine a system of springs, wouldn't last long. Too much wear and tear. Too much heat builds up in the springs. Elasticity is lost, and the machine fails. That's why, from my point of view, it's certainly not perpetual motion because that's impossible. The closest thing to that is an atmospheric clock, but even those need parts replaced after so long of a time because gears and pistons wear down. I'd make a point, too, that there is a difference between "free energy" and what I'd call "commercially free energy". Free energy from nothing is a pipedream, although we are surrounded by energy everywhere. Commercially free energy, however, is achievable. Consider somebody like Oleg Jefimenko, who made motors that operated from the static electricity in the air which is still being experimented with by the Ion Power Group. It's commercially free energy, because all it amounts to is putting up a tower to collect the energy--- sort of like plugging a power cord into an infinite power source. Or, something like wood gasifier systems where you can run generators off of garbage, scrap wood, etc--- which is commercially free energy for the consumer because X amount of trash can supply X amount of energy and not cost anyone a dime. As far as this particular system goes--- I think it falls into the commercially free energy idea, but I just don't think it'd last long enough or generate enough power to really be that efficient. I'm figuring maybe 10% efficiency, maybe no more than 20% efficiency which is comparable to solar panel energy conversion. But, then again, he might build a more efficient system with better materials and increase that efficiency, but it would never achieve 100% efficiency which would be perpetual motion because of friction, etc. The irony is that without friction no work could be done at all, as the late Julius Sumner Miller pointed out in his television programs. So maybe 99.99% would be the most efficiency that could ever be achieved. Jesus bless you 😊

[@Motionmagnetics]

You can't please everyone, but thanks for watching.

[@salehfaghani378]

Use mu-metal as shild

[@raxxx2004]

where's the actual demo that it is working?

[@paulwilton735]

You're not sharing a working design, You're sharing an idea. You're stuck on shielding.

[@studeii]

:)

[@robson6285]

Exactly

[@ronaldd2154]

3:48 and thats as far/ good as hes gotten it.

[@AhmetTasdemirDJLuds]

you are living , because you do not solve yet

[@MAl-xz7lc]

NOT GOING TO WORK.. TO MUCH friction.. 🙏🏽

[@thetrucker6889]

There is a undeniable fact here, most believe that perpetual motion will break the law of physics, so they almost instantly shrug the idea that magnets can be used to generate electricity. They are very narrow minded people in my opinion! The planets economy would literally crash over night if this technology was to hit mainstream media, so companies like shell oils and others actively repel these technologies from becoming public knowledge. Magnets harness their own force. That force can 100% be utilised to generate power. As stated in the video its only a matter of precise timing. Mark my words magnets will be used in our planets future. But not until the power struggle for fossil fuels is disregarded by our countries governments

[@Thomeeno]

LMFAO have you ever noticed magnets are only known way to generate electricity?

[@TotalFreedomTTT-pk9st]

Agreed - it is a commercial limitation since every other job relates to scarcity - 'they' do allow information out though - like these video's - I think they have realized that most people can not build anything anyway so as long as the information is not too revealing or simple they don't mind a few thousand running free as long as it is not a few billion of their customers oh it's not just big Oil - it could even be free energy types that have a ton invested - or wind turbine makers or solar research - free energy is the bunker buster bomb that implodes ALL energy research big Oil is just one of hundreds

[@ashercorbett8089]

What does “I believe so” mean?? Did you make a working Magnet Motor or not 😭😭

[@Raptorski753]

What do you think about scheme from: kzbin.info/www/bejne/qGWxZYefhK2WY8k Do you think its legit? At 2:11 motor start to self accelerate and i cant find any outside force that push/pull rotor.

[@Motionmagnetics]

Hard to tell by the video. It's pretty easy to fake something like that, but he's not making any extreme claims about it being able to generate power at least.

[@0believeinjesus9]

John 9:35-41 (KJV) Jesus heard that they had cast him out; and when he had found him, he said unto him, Dost thou believe on the Son of God? He answered and said, Who is he, Lord, that I might believe on him? And Jesus said unto him, Thou hast both seen him, and it is he that talketh with thee. And he said, Lord, I believe. And he worshipped him. And Jesus said, For judgment I am come into this world, that they which see not might see; and that they which see might be made blind. And some of the Pharisees which were with him heard these words, and said unto him, Are we blind also? Jesus said unto them, If ye were blind, ye should have no sin: but now ye say, We see; therefore your sin remaineth.

[@bill-zy6dg]

You might want to build a working model, I doubt you can.

[@MeatGawds]

Nope

[@thanosxe.8464]

You are violating the laws of thermodynamics...

[@WhatDadIsUpTo]

Your foundation concept is flawed. The magnetic switch does not "shield". The way it works is, it redirects the Flux fields. Bottom line is, you are a KZbin creator, vying for traffic using clever theoretical conceps. If you really want a "motor" that self starts and accelerates, you'll have to learn how to redirect Flux. Such a motor already exists and for most, it is hidden in plain sight. Just look around.

[@TotalFreedomTTT-pk9st]

I think he knows it redirects flux - it's just a term 'blocking' or 'shielding' - but could you elaborate just a bit on the motor that is in plain site ? and do you mean an all permanent magnet motor ?

[@張明鍾-z9t]

一

[@HomicideHenry]

You have the right idea. Everyone else has made "motors" that relied on the magnets doing the "work" and they've all failed. As long as you have motion, the motor will continue to operate. So the answer has always been under our noses, you must first design a mechanism that keeps "tripping" a spring to keep up at least a tiny amount of motion, that way the magnetic field can keep "pushing" (or "pulling") the metal it is repulsed or attracted to. Jesus bless you 😊

[@Motionmagnetics]

Exactly. Sometimes you need to go in the opposite direction instead of trying the same things over and over.