where can i find the magnet shematisc of this and the other videos of the arangement that you make. greating from holland.

Your opening statement is my current mentality

you need to add kinetic banging into yer designs . when the arms quickly swing and stop this kinetic energy must be harnessed in the direction of the spin . the spring is wrong as it absorbs this energy . kinetic banging is similar to back EMF and water hammer

What always your total cost up to this point?

This could be used as a energy producing method if a ball enough big would move and spin the blades of few generators in line and at the end one man could get the ball and put it on a back moving line same as the first one , so the ball would move back and forth on the two lines and produce energy spinning blades of generators. Or liquid magnet could spin them faster and move quicker and at the end a man would collect and put it on the other line

Use magnetic with copper coils placed in a geometric pattern u gota find a specific pattern that works tho

What does “I believe so” mean?? Did you make a working Magnet Motor or not 😭😭

Dejan de gastar dinero y tiempo en diseños que no funcionan ni pueden funcionar. Para hacer un motor magnético primero tienen que encontrar un material que permita hacer que el flujo magnético pase en un sentido y ni en el otro, esto es un DIODO MAGNETICO. Usen todo su dinero, tiempo e imaginación en investigar este tema, el que lo logre ganará mucho dinero, fama y resolverá el problema de la energía para la humanidad.

What about a figure 8?

The sheer size and weight of this device tells me it could not be efficient, just another complex looking SCAM, SCAM, SCAM.

Trying to invent the wheel

Are you trying to work out the Luling motor?

I do wonder, while perpetuum isn't perfect but it so much closer to forever or just extreme longevity, why isn't the world building these things already on a commercial scale?

nasa a few years back in orbit they released a long teather that suplied generated a lot of amps from the earth magnet field with absolute zerro drag it worked till the teather floated back on itsself . its out there we need to keep looking . maybe that little electric car that tesla had with that little anntana was a tesla coil in reverse to charge tham batteries .

god and the universe seem to do quite well . since space has allways been and goes on forever so do the infinite big bangs recycaling forever no beging with no end in perfict harmeney . imagine no begining no end you cant can you but it is .

Unable levitation

Forgive me for not staying with the issue of the video. when a thought comes to mind i just let it out. I don't know who to ask, so i ask everyone. Lets say a "runs by itself 24/7 " machine that has multiple mechanisms, & the timing of all the mechanisms is controlled with computer electronics "machine generates the electric power" . will it be considered perpetual motion?

It is a very interesting job. Im on a personal project to build my own small wind generator and I was looking for generator designs. Your looks really interesting. Would it work as a wind generator? Im not really an electric guy, so my ignoraqnt question is: how much power would this design generate in smaller sizes (voltage?) How much force would be needed to move it?

Wellness check, you doin okay?

Muito bom , bem esplicado , lá pergunta e , esses motor magnéticos no param de funcionar ????

I had been thinking aboutyour idea as well.But you are already doing it.very good! And i am also fan of Robert.I like his personality.Also seen his vid you are showing , several times.I wish you good luck and you do awesome work.very good idea!!

what is its efficency? (idk any electric stuff i just ask for efficency to make my brain wrinkle or smth

stl files?

....electro magnetic rail...helloo

Has anyone mentioned that you are trying to make a perpetual motion machine?

Can I give you a tip.. To know how good your designs are you really should measure the generators efficiency. That is the ratio of output power to input. Otherwise you could be wasting 90% of the power you are feeding it and not know it.

use memory metals that will pull weights up when wire is hot....then lower the weights down and gravity generate when wire is cold.....just gotta heat the wires up and they can pull about 1.4 tons per square inch of metal used in the wire when brought up to the temp for memorized phase to activate (which can be as low as warm/hot water) wire would be in a chamber filled with gas which can be chilled or heated up quickly and efficiently to switch between the wires memorized and regular states (wire or any type of spring made from the shape-memory alloy) spring gets hot - lifts up heavy stuff. wire gets cold, loses "coiled" memorized state becomes flexible...lowers weight spring is in flexible vaccuum chamber filled with chilled or heated refrigerants

I guess that we are now living in the age of sibilant audio.

I took Robert Murray Smith's idea and stacked it already and added it to a wind generator with a magnetic button.

This is great thanks so much for your clear explanations and putting up the files. Would you be willing to do some customization for a flat rate?

To increase the output you can use multiple smaller 2-3 bifilar serpentine coils in single stator. It will increase the amps as you already stacking them in series. Am also working on gravity generator 😊

Did you already assemble it? what are the results? How much power did you get out of it for how long? I guess it would have to be scaled up to be useful, just wonder how much?

Alotta work to light an led. Washingmachine drive coil wud be a shortcut for you too...

Since 15 years, I have been dealing with angular energy electricity generation systems (R&D). My positive designs about angular continue. In this regard, my own financial means are insufficient, I had meetings with many businessmen, they accepted the financing of the project, but they gave up when it came to signing a protocol, that is, when it came to formalisation. If there is an entrepreneur who will take firm steps with me on this path, who is idealistic, has financial means and wants to make an official protocol, I would like to meet. 98% of the published videos are wrong and do not work. I know the mistake they all make.

I think your creation is excellent and intend to replicate it myself. One question I am struggling with is why round magnets are used? If I understand correctly from analysing Robert Murray-Smith videos, the actual electromagnetic induction happens in a 90 degree angle from the movement. So he explains why and where serpentine coil works. So I am wondering if rectangular magnets centered as a daisy would improve your design? Do you have any thoughts or knowledge on this matter? Thank you very much and I look forward to your next video.

These machines require massive amounts of precision and skill to make, and these machines require a level of efficiency so great it’s very hard to overcome. So why the hell are using the actual motion of the machine to keep it going? Let the magnets run on their own. Make this machine flat, connect it to a magnetic generator (magnets spinning around a copper coil to create electric field), use a very minuscule amount of the electricity created to power a spring system that pushes the magnets. It’s feasible to create multiple of these units and have them run in parallel for 22 hours a day. It can be used in small and large scale power production. I’m just too poor to make it happen so I’m spreading the concept as far as I can until someone picks it up. All I ask for is credit and 1 stock in the company, or .1% royalties. Blueprints will come asap Edit: In depth- Two rings of neodymium magnets. 1 outer ring (positive poles facing inward), 1 inner ring (positive poles facing outward). The inner ring will be connected to high strength aluminum arms. The arms will all be connected at the base and hooked to a shaft inside a ball bearing. This shaft will spinning a magnetic generator beneath the kinetic system. The systems- Kinetic system consists of the two rings of magnets, aluminum arms, and a ball bearing. Electric system consists of the shaft, generator, motherboard and any essential wiring. Spring system consists of a tube, spring, plunger, brushless electric motor, and a system of gears. Hopefully I’ve explained enough for people to understand the vision and have the ability to create multiple versions of varying efficiency to patent and sell as their own. Preferably this can be a free device that kickstarts the process of becoming a post scarcity society. I can see how this will be used in many applications ranging from large to small, to very small. Good luck guys and let me know if you got it to work

Have you considered using magnetic levitation instead of the string?

What's with the Wish ad music? Lol.

Since 15 years, I have been dealing with angular energy electricity generation systems (R&D). My positive designs related to angular energy continue. In this regard, my own financial means are insufficient, I had meetings with many businessmen, they accepted the financing of the project, but they gave up when it came to signing a protocol, that is, when it came to formalisation. If there is an entrepreneur who will walk with me on this path, who is idealistic, has financial means and wants to make an official protocol, I would like to meet.

4m35 yep stand on and put weight from front to back and throw bits of copper all over the road

I only watched the first 20 seconds and paused. Autistic adhd fridgie brain, can you turn the wheel puck thing on to sideways (horizontal) put a small weight on the front, weld arms to it the go through a wheel and see if it moves? Linden:)

You may want to consider incorporating fan blades into the rotors for cooling. Something similar to either a centrifugal or a squirrel cage fan maybe. I suggest this because I imagine the possibility that once you really start generating power for any real length of time that the plastic may succumb to the heat of the coils. Just a thought, maybe you'll read this and remember if you need it 😊. Keep up the good work, awesome project!

You are copying our patented generater

Great progress. Would appreciate narration rather than music. Thank you

You should have 2 weights so that way when your resetting one weight the other will start producing power also you should use a wind mill to reset the weight for you

No finished product at the end of all that? ARGH. Not right. Also you should work on diction and delivery

Okay, couple of things you did wrong. Number one you're working on attractive Force rather than repelling force. Number two just build it like a standard engine. You have what I call the mag valves at the top of the engine working like the valves on a standard engine. The Piston will be made of a high-powered neodymium magnet, with the mag switch at the top of the cylinder. This will have a cam that rotates the mag switch on and off. Once the mag switch is turned on to its proper polarity it shoves the Piston down due to repelling forces. Then you really don't have to worry about modifying anything else about the engine, it'll function and run just like a regular engine would. Make it happen captain.

...... self winding magic lever eliminates the weight needed .....

see Willian Skinner's gravity device of 1939

2:25 Or killed...you can add this quote from God Gen11:6.