The KS3 Cobra Bag Spring

[@LeoSol13]

Incredible as always. Not only answered my question regarding the spring caps, but got to see it in action in different places as well. Can't wait to see how it looks like in the DIY set-up. Keep up the amazing work, mate!

[@Kewlus]

Thanks mate!!!

[@stanleyipkiss509]

you should definitely look into making different solid colors for the bag

[@Kewlus]

Yes I will. Thank you

[@DanielThomasArgueta]

@@Kewlus I'll buy once there's a solid red bag. 🥊

[@joshmatriciano1451]

Just picked up the KS3 spring!

[@gowinchenzo]

KS3 module ordered 😤

[@barrybatiste9363]

Mines make it on 6th yes🎉🎉🎉 thanks reedy

[@Infamoustr85]

Just bought the new spring. Will give my feedback hopefully next week. FYI I'm in Melbourne if that helps.

[@Infamoustr85]

Ok so I've had a couple of weeks with it and noticed something important which might be helpful for others. The base needs to be secured more than with the previous spring. I was using the previous KS2 spring with the paddles and sand bags. When I changed to the KS3 spring I honestly didn't find much difference other than that I can now throw in a few uppercuts. Then I noticed I had to keep repositioning the bags with the new spring. I then added 2 x 15kg dumbbells on top of the bags. Wow what a difference the spring is with the base properly secured. I think the new spring must transfer the load down to the base. Hopefully this makes sense.

[@Kewlus]

Thank you for the feedback!!! Yes the KS3 needs the base to be more sturdy to get the full performance improvements

[@aherosquest4536]

Dang it. I just got the KS2 version.

[@Kewlus]

You can upgrade at a later stage 🤙

[@leorefuerzo832]

Horiontal set up is good for roundhouse kicks

[@joey_ricciardi117]

Question, please. What is the thickness of the rods? Will it fit in my Ringside post/base pole? Your spring definitely seems better than the Ringside and Title bag (I have both).

[@Kewlus]

Hi Joey, it's based on my original DIY/Kewlus design, which fits onto a standard 3/4 inch plumbing pipe. It's backward compatible with all my previous designs, including the DIY integrations. I did not design it to fit any other types of commercial cobra bags, but if the diameter fits then you may be able to upgrade. The inner diameter of the connectors is 27mm.

[@joey_ricciardi117]

@Kewlus great, thankyou for the quick response. I may even just buy your whole setup. I just hate for these other 2 cobra bags to go to waste.

[@Kewlus]

Thank you brother - I know what you mean. Those other cobra bags are impossible to upgrade and if something breaks, like the spring (and they don't last long), it's almost impossible to replace. That's exactly why I developed the modular concept.

[@TSO4179217]

[@meowdownkio]

Hey! i like what youre doing. My question is how hard you can hit this thing without worrying it'll break? I'm thinking of pure powershots. Thanks!

[@Kewlus]

My ceiling is not strong enough. If you attach it to a solid beam then you should be able to smash it

[@EG-tw1kj]

When will the platform paddles be restocked?

[@Kewlus]

They are in the process of getting upgraded. The new version will be released around February next year

[@dragonfruit5271]

Hey Reedy, KS3 looks amazing in action! Thinking of upgrading from the diy KS2 spring. Looks like there is metal end caps attached to the spring. How am I suppose to attach it to the upper 3/4 pvc pipe and the bottom 3/4 galvanized pipe/nipple? KS2 slid into both and then we used alligator clamps. How would KS3 be attached to the diy set up?

[@Kewlus]

Would just slide on and you can simply use duct tape to tape the connectors in place

[@dragonfruit5271]

@@Kewlus Will you be making a video to show how the KS3 looks and and performs for those with diy set up?

[@Kewlus]

Yes

[@richiestarks6163]

Update; The new KS3 spring arrived and the recoil is quick, much more solid and give me (6’2”) the perfect punch for my. As fast as base, it moves a bit much and thinking if a 1 inch bar would be more solid to stop the vibration on the bottom.

[@kevincorbett4161]

Hey Reedy, don't think you send to UK, what are the specs for the new spring and any idea where I could get one. Cheers

[@Kewlus]

I do ship to the UK from a warehouse in Canada so yes you can order from the UK. There may be import tax at your end though which I don’t cover. Add a product to the cart to get a shipping cost. It’s not too much.

[@alanmacalma]

Does this new spring fit on the original multi base?

[@Kewlus]

Yes

[@adamroddis3218]

Would the small ball be a better option due to it being harder to hit?

[@Kewlus]

It definitely more challenging and moves a little faster

[@adamroddis3218]

@@Kewlus cheers

[@krixxusjg7452]

Hi Reedy, I want to order the whole kit with the KS3 spring but I'm too dumb to find which components you need to basically have the whole core kit, can you help me?

[@Kewlus]

Sorry, my bad. I've just added a KS3 Core Kit to the Modules page: kewlus.com/pages/cobra-bag

[@theweekendoddz1176]

what's rhe dimension of the spring? thickness, diameter and length

[@cdt6857]

Awesome! Is this going to be available in the all in one bundle?

[@Kewlus]

Yes it is already available as a bundle here: kewlus.com/pages/cobra-bag

[@mr.freddie]

would the KS3 without the connector fit into the rubber caps?

[@Kewlus]

No it would not fit because it’s a bigger diameter spring. The connectors at each end of the KS3 slip perfectly onto the Click Bar or the 3/4 inch pipe for DIY. There’s no need for the rubber end caps with this new spring

[@creaase406]

Just out my order in. Have you looked into taking this to shark tank?

[@Kewlus]

🤙 just happy cruising along

[@creaase406]

@@Kewlus I hear u. This is a great innovation. I have the ks1 ks2 the full build as well as the title cobra bag and innolife cobra bag. And honestly yours is the best and most cost effective. You can make a killing brother

[@Kewlus]

Thank you brother!!! I would definitely love to go on a show like that.

[@Kewlus]

I’d be keen to see what you think of the KS3

[@creaase406]

@@Kewlus yezzir!

[@MrRenaissance17]

Can this spring be used with a 3/4 inch galvanized pipe? I'm thinking about upgrading from the KS2 to the KS3

[@Kewlus]

Yes it’s compatible 👍

[@jazzcat1056]

Can you use the base paddles with this or need to build the one you mentioned

[@Kewlus]

The paddles may not be sturdy enough for the KS3, so I highly recommend making the thicker baseboard or having a local carpenter or cabinet maker make it for you. I’ll be releasing an upgraded version of the paddles early next year

[@OHMASIA1]

@@Kewlus Your kidding me, I just got rid of my old board and kit to replace with the full new kit and paddles-I just spent 75 on paddles that are going to be useless to me and i need to buy a new bottom board!

[@КириллМосян]

Подскажи пожалуйста где взять такую пружину?

[@Kewlus]

On kewlus.com

[@NB780]

I just got my K3 spring going on day two and I'm constantly adjusting the spring and tightening it to the two metal ends (loctite and plumbers tape doesn't seem to be working). It gets annoying after two mins of use, I can feel it loosening. K3 might be faster than the k2 but having to adjust it ruins my workout.

[@Kewlus]

Try using epoxy and leave it to dry for 24 hours

[@RealAugustBlack]

When will the KS3 spring be back in stock?

[@Kewlus]

About 2 weeks

[@RealAugustBlack]

@@Kewlus awesome I will be purchasing it! I I am a US amature boxer out of Northern Va & have been using my cobra bag from you since 2021 and its been amazing & I have never had a single issue nor complaint. I keep one in my trunk disassembled as well for when I am on the road and want to pull over to a part and get some work in. It never takes more than 5 mins to get everything set up and going. I’ll be a lifetime customer for sure. I believe in you. Thanks again

[@Kewlus]

@1AugustBlack thank you for your amazing feedback, especially regarding the portability!

[@mariuspacevicius403]

Brother do you do international deliveries. I am in UK

[@Kewlus]

Yes absolutely 👍

[@mariuspacevicius403]

Amazing within a day or two will place the order.

[@stanleyipkiss509]

will the suction cups be enough to handle the ks3

[@Kewlus]

Yes but only if you have the right flooring for them to stick to like painted flooring in a garage

[@sik8324]

Am I able to use the section cup base, will it be strong enough with this spring?

[@Kewlus]

I will be testing it this week

[@sik8324]

@@Kewlus thanks!

[@sik8324]

​@@Kewlusany update?