The Milwaukee PackOut 101 Shockwave bit set they should have made (3D Printed Bins and bit holders)

#packout #Milwaukee #3Dprinted
Here is how Milwaukee should have released the PackOut with ShockWave Bits.
You Can get you 101 PC kit at store.jakeofall.com
Head over to @thejakeofall on IG
Check out the Kaizen Foam @
kaizeninserts.com/
One of the best designers of 3D Printed Tools
workshop.electronsmith.com/
Let's be SOCIAL!
JakeOfAll on Facebook: / thejakeofall
Our Garrett Farms on Facebook: / thegarrettfarms
Instagram: / thejakeofall
Twitter: / jake0fall
My Ohio Power Tool Affiliate link shareasale.com/r.cfm?b=123230...

[@samhorner9503]

I just placed an order, thank you for the product!

[@westtennesseeprepper2552]

Great vid for all us OCD guys love to be organized thanks new subscriber I have all tstack stuff will be getting inserts and bins great job

[@JakeOfALL]

Yeah they both are super helpful in staying organized

[@danielhall2274]

Great job

[@JakeOfALL]

Daniel Hall thanks

[@mrjonnyblaze]

Is there a kit of the bin and bit holder set for those who already have the packout driver set?

[@cm19kilo]

Do you have an packout bit holders pre-made?

[@paulmendenhall5226]

I went to the website didn't see the kit i have already bought the milwaukee bit set in the slim packout case but know i would like to organize it and have room two add on more do you have a link to what I need to get i would like to put all the bits in one compartment and have two for other bits

[@JakeOfALL]

Email us at [e-mail]

[@dalemueller4165]

Love the videos. Wish I could afford all the packouts that you have.

[@JakeOfALL]

Thanks so much, I gave up drugs and smoking to be able to afford them !

[@jronmanbuilds]

Right now I use tough system but if I used packout I would probably go with the 7 holder option. I mostly use the 2 in bits because I don't have to use any bit holders. I would probably outfit one with some hex shank drill bits as well. 4 holders full of the 2 in bits, 2 full of drill bits, and another full of miscellaneous bits would probably be my setup. If there was an option where the bits were not included that would probably be my preferred choice. That way I am not limited to shockwave bits. If I want some high end german bits or some el cheapos I would have that option without feeling like I am wasting bits.

[@JakeOfALL]

JronmanBuilds I have a tstack and versastack options too . I am the same way on bits too

[@davidhermoso5403]

Awesome brother. I'm down for it

[@JakeOfALL]

go to store.jakeofall.com it's on the main page

[@abrickler]

Great work man! The give away is going to be great!

[@JakeOfALL]

abrickler thanks

[@JakeOfALL]

abrickler and I hope the giveaway is epic!

[@CallSignGino]

Hey Jake, will the bit holders that come in the Milwaukee bit sets fit in your long thin bins?

[@JakeOfALL]

Call Sign Gino yes they will !

[@privateer5]

Jake, any suggestions on keeping the bit holders from melting /warpingin the sun? I currently have black bit holders from another 3D printer (not you), and they all melted and warped in the sun. Both inside the packout and outside. Is Red less effected than the black? is PETG material more resistant to UV?

[@admlshake]

i know this is late, but PETG would hold up much better than PLA. PLA has a much lower melting point and is weaker in general. I print a ton of stuff in PETG for situations like this. Though I haven't printed anything for the packouts yet, I do have a number of M12 pegboard tool holders in my garage that so far have held up pretty well with out any sign of breaking down. Not to mention some odds and ends I have printed for my truck.

[@johnlange8729]

I found it impossible to mount the orange thingies in to the end holes of the long black trays. My efforts yielded nothing but cracked and mangled thingies, and a cracked black tray. I will be asking JakeOfAll to replace and resend me these broken pieces, but ask that they be pre-assembled. If there is any method that works, I couldn't get it to work for me. VERY frustrated.

[@JakeOfALL]

Definitely email us

[@Tenspound]

I would those inserts, I could be blind I tried to find them on the website, not immediately visible at least on my phone. Where would I get them? Thank you. I bought this but kit recently and figured it would have the individual bit holders. Why wouldn’t it? Underwhelmed.

[@JakeOfALL]

store.jakeofall.com/packoutparts/thin-bins

[@4mudski]

Count me in!!!😎 love it!!!

[@JakeOfALL]

go to store.jakeofall.com it's on the main page

[@4mudski]

I’m up for the drive I mean!!😉😉

[@bowtiedooley]

I don’t know why but it says “no stream, tap to retry” and won’t play this video at all. Not sure if it’s on my end or a KZbin glitch

[@JakeOfALL]

boo

[@gocygo63]

-Hey Jake ...if I order the bit-holders & bins can I get them in another color besides red & black, say white...or even light grey? ...I'm noticing the older I get, if a background is a darker color or black I have a hard time seeing the small letters/numbers on the bits, etc...I know white gets dirty, but it's still easier to see the bits, tools, etc... ...just curious... ...great videos! ...p.s. I just can't believe Milwaukee doesn't market small storage & small compartment items like you fabricate...love their tools & the basic Packout system but Bosch & DeWalt kicks their ass on the "small storage" market...

[@supertech3992]

I would love to see electronsmith (aka) Benjamen Johnson design those slim packout bins with the t-stack mounting system because the bit holders slip in and out much easier and the bits release much better than the Milwaukee ones do.If so I'm in for at least half a dozen. Also I'd be willing to pay a premium for better resolution printing, I'm not a fan of the rough lines. Thanks.

[@JakeOfALL]

Take a look at a post i did on Instagram ... doing just what you said .

[@E.IS.M.I.A.]

I want that pipe wrench Jake!

[@JakeOfALL]

Eric Soto Hernandez I do too haha

[@donaldbright9310]

Great video..... I was looking for this setup on your sight and was not seeing it. Do I need to piece it together or do you still sell it in a bundle?

[@JakeOfALL]

We don't have it as a special anymore, but we can always do it.

[@xtiantab]

Please give me a link I would like to buy this kit

[@michaelreyes664]

I need one

[@JakeOfALL]

Michael Reyes I do too! Haha

[@nicholasfattizzi6168]

Video won't play just says no stream tap to retry. Did it get taken down??

[@JakeOfALL]

Nope still here

[@tehboxkat]

I’m having same issue

[@abidingradio4003]

I tried to buy these at your store but they aren't available.

[@JakeOfALL]

Msg me on IG or at [e-mail]

[@Grantski2007]

Jake of all not sure if there’s an issue on your end but I haven’t been able to get this specific video to properly load I’ve tried multiple times this week. Love the content btw

[@mitchbodnar879]

Me too

[@jasonarmstrong4556]

I just need some of the little red bit holders... how do i get those?

[@JakeOfALL]

store.jakeofall.com

[@jasonarmstrong4556]

@@JakeOfALL can't find them!

[@rettkowskibrian]

Yea those look great if you have any fingers left after trying to ONE bit holder in.lol wow maybe they need a little redesiging

[@JakeOfALL]

haha. the corners of the bin just don't much flex, so it's harder to get the bits in the first two slots. Once they are in they work fine.

[@paulmendenhall5226]

I don't live in Ohio but i would pay the shipping for a pipe wrench

[@JakeOfALL]

K

[@tronprice1035]

I'll take the pipe wrench!

[@stormroto3242]

I want the pipe wrench

[@JakeOfALL]

storm roto same

[@jasonbabila6006]

Pick it pack it fire it up come along...

[@JakeOfALL]

Jason Babila 💯

[@nunorodrigues6201]

Good friend! I see that you make a lot of videos to show and advise us! Thanks in advance, because we help a lot! But I would like to ask you for a favor that, to date, I haven't seen any of these videos, and I can't find them on KZbin! Then you would be the first to put this video on your channel! That is, milwaukee DYNACASE boxes, how they work or fit into milwaukee packout bags! Thank you 💪🏼💪🏼💪🏼

[@JakeOfALL]

I have not seen them anywhere local

[@Thompson-from-Finland]

After milwaukee sees this they be like fuck why we didnt think that!😂

[@JakeOfALL]

Right !!

[@baileysavage8697]

Did you just pull out your calculator for 7x8??? 😂😂

[@JakeOfALL]

Bailey Savage maybe........lol

[@JohnnyUmphress]

I like making kits in the Packout cases. Here are a couple of the ones I did recently. imgur.com/a/V521gcf

[@JakeOfALL]

looks good

[@bartholomewgreatpants3425]

Your link no longer works. At least on mobile it doesn't.

[@JohnnyUmphress]

@@bartholomewgreatpants3425 Yeah, that was three years ago and I have cleaned up some of my photos on imgur since then. Thanks for your interest though.

[@SurvivalSpec]

I love Milwaukee tools but I like DEWALT bits better

[@daquanjackson]

I was about to say the same thing

[@JakeOfALL]

I'm indifferent as far as bits.

[@ericherzog6735]

For some reason this video doesn’t play for me. Getting the pin wheel

[@JakeOfALL]

A few people get it it's crazy. what country are you in?

[@ericherzog6735]

JakeOfALL United States. Weird, every other video I click plays. 🤔

[@JoshR512]

FYI, this video no longer working?

[@mitchbodnar879]

Would like to see this vid

[@vmperkins]

I can’t play this video.

[@JakeOfALL]

weird

[@MatthewR22]

Can’t view video

[@JakeOfALL]

Where are you located

[@MatthewR22]

JakeOfALL California

[@bwojak3226]

Looks like a joke jake, 10 bucks for one of those black plastic trays, that you seem to have a hard time installing, are you serious?

[@JakeOfALL]

The corners of the bin just don't much flex, so it's harder to get the bits in the first two slots. Once they are in they work fine.

[@vernonhill1x]

B Wojak don’t be so cheap and just buy some, trust me, you will thank Jake later!

[@milehighhitz87]

GARBAGE!!! Video won’t play!!

[@JakeOfALL]

7800 other people can view it.

[@milehighhitz87]

Well good for them, ABSOLUTE GARBAGE UPLOAD!