The most accurate Doweling Jig, China Tools Ep.49

[@LostWhits]

Thanks for the review. and the comparison of the different jigs. Comparing the pros and cons between the different models is so important in the decision making. I didn't even notice there wasn't an option for the 15mm hole until you mentioned it.

[@strrchristmas]

Hello Dennis, You are one of the very few tool review people I trust implicitly. Thank you for doing a Great job on every review. Have a Merry Christmas with your family. It was a real treat to see all of your family. Thank You!

[@Timber2Toothpicks]

Dennis….I now own Two of these jigs. I am simply more confused than ever. I like both of them. I use both of them only in different aplacations. I used one on one build then after fussing with the same jig on a different job I removed it and went with the other… Which one? I own both of the two you compared. I agree with you 100% that I use the same one that you did on cabinet work. I just felt like I was spot on accurate. When doing cabinets accuracy screams back at you. You did a great job presenting them. I posted up a review before. This time I came in from my shop after using them side by side on a paying job and posted this review up… Very good comparison. I just built the cost of the jig into the total job cost. Easy !

[@MrPatdeeee]

Wow! Dennis we are back to our "awesome" 16/9 (1080p) HDTV. Thank you kind Sir. For, modern hand phones are OK. But when they are used on TV's and Monitor; it's NOT good. UNLESS they turn the phone 90 degrees. Yes...there are times; when it can be straight up!. Like a tower, etc. But for most of the time; when that large black nothing on each sides, is for the birds. Thanks again Dennis, and as I have said, "You are THE 'Cut-Above' in DIY'rs channels". We ❤always dear friend. Keep it going. For we❤it!

[@daviddura1172]

thank you for all the evaluation and education you provide. Have a great holiday season and here's to a happy and prosperous new year....love the closing scenes....

[@rflournoy]

Thank you for another excellent tool review. I've purchased many of the tools you recommend, and always enjoy using them. Merry Christmas to you and your family. See you next year.

[@396fab]

Hi Dennis! Greetings from Alabama, USA. I've watched nearly all of your videos. The videography and editing are top-notch! Your delivery style is engaging, and the content is informative and valuable. I'm grateful for your work and I've learned much from your efforts here. From my family to yours, Merry Christmas and a happy prosperous New Year!

[@mellymel1100]

I know this is random, but I LOVE listening to your voice...it's very soothing. I hope you and your family have a Happy Christmas and Happy New Year! :D

[@3frogltd987]

I agree. Dennis' presentation comes across as sincere and factual, with no hype, just a calm honest assessment of the pros and cons of each tool. All of which help us decide what best fits our needs and preferences. Thank you Dennis!

[@SKarlo051]

This is fabulous but the drillpro comes in a bit more favored in my usecase as i usually get my wood pre-cut and particle board too and assemble on site of my DIY living in an apartment does not allow for a full workbench with clamps and the integrated hole for drilling the larger hole for other joinery comes in handy without removing the already tightened assembly. Marvelous video again friend.

[@denty32]

Merry Christmas Dennis to you and your family. Thanks for the great reviews and builds

[@btrswt35]

I will never buy anything from bang good again! I ordered a dowel cutter that had imperial sizing. They sent me the metric version. I contacted the customer service and they said I could return it and get a replacement but I had to pay for the shipping?! They mixed up the order yet the customer has to pay to correct it? Also potentially wait weeks for the replacement? I asked for a partial refund, they said no because there wasn't anything wrong with the item!!! It was the wrong thing, so yes fundamentally there was something wrong with it! If fact, I didn't order that item! There are to many other online retailers that stand behind their service that I will do my business elsewhere.

[@NWGR]

Thanks for the review Dennis. I'm very happy with my dowelmax, but out of those you showed, I think I'd prefer the drillpro because it has more drill guides. The less you have to stop your workflow to reposition a tool to keep things moving, the better. Merry christmas and happy new year!

[@kevinshea4353]

Denis, thanks again for another great tool review! I must admit that I drool over your shop furniture. We should all strive to get our shops looking so well!! Happy Holidays to you and yours!!

[@MCsCreations]

Fantastic review, Dennis! Thanks a bunch! 😃 Stay safe there with your family! 🖖😊 And happy holidays!

[@HookedonWood]

Thank you very much for your support last year. Have a great Christmas and a wonderful new year.

[@jacquesbingle6773]

Merry Christmas and a very Happy New Year to you and your family. Thank you for an informative year and appreciate the awesome videos. See you again next year from sunny South Africa

[@HookedonWood]

Thank you for your support as well🙏

[@wildwood3031]

Thank you for your videos they are consistently hight quality and provide useful information every time. Have a happy Christmas to you and your family from Australia.

[@antonoat]

Dennis, merry Xmas and happy new year to you and your family. Thank you for sharing your wonderful films with us throughout the year!

[@wolfgang7924]

Denis Danke für deine Vorstellung und emphelungen von China Tools, diese hat mir schon sehr viel geholfen bei Kauf endscheidungen.. Ich wünsche Dir und eine Familie ein Frohes Fest und ein Gutes neues Jahr 2024👍🎄🎊

[@emanresutla]

Merry Christmas to you, Dennis! Always love your content and look forward to more in 2024!

[@allthegear-noidea1264]

Have a great Christmas Denis! Thanks for another year of great content!!

[@kevinronald4137]

A very Merry Christmas to you Denis and your family. I look forward to watching and learning from you next year. K

[@leocahalan1809]

Thanks Dennis, another great review! Merry Christmas to you and your family!

[@rogerwhoareyou]

Thank you for another great review. Happy Holidays to you and your family.

[@SandyMasquith]

Thank you for another great review, Dennis. I hope your 2024 sees your channel grow even more.

[@robinbanando8416]

Beautiful family. Thanks for the reviews. I find them very helpful.

[@dirkmessiaen8322]

Vrolijk kerstfeest en een gelukkig nieuwjaar! 🎉

[@HookedonWood]

Dank je Dirk. Jullie ook!

[@mandeepsinghsehmi1951]

I wish you and yours a very merry Christmas and a happy new year ahead!

[@heystarfish100]

Merry Christmas and a Happy New Year to you Dennis and your lovely family. It was a wonderful year watching your informative videos all of which were brilliant and entertaining. May God continue to Bless you all and to all of your beloved followers of this great channel.

[@HookedonWood]

Thank you very much for your kind words 🙏

[@stewartcotton9954]

@@HookedonWood Do you sell the plans to the drawers/cabinets you made?

[@colindoesdiy]

Another great review Dennis it's all very confusing given the number of jigs out there, too choose the best for a particular task so your reviews help a lot. It's great to see you spending time with your Family, they help to keep you young 😆. My daughter recently had her first child a few weeks ago so we now have six Grandchildren, two boys and four girls 😁 to keep us busy, especially at Christmas. Sadly we lost our family dog "Barney" at the end of November he was only nine, but I know he had a great life with us and was such a character. Here's wishing you and your Family a very Merry Christmas and a Happy New Year.

[@HookedonWood]

Hi Colin, i saw it in one of your post at insta. Very sad. It most be though. We also know we will outlive our dogs. When everything will work according plan. But it will be though. We will find peace knowing they have a wonderful live. Thanks for all your support. Merry Christmas and happy New Year!

[@SimonHumphrey-xc5fh]

Love you Dennis happy Christmas and a great New Year and thanks for all the videos😊❤

[@metronyc2855]

Great product overview. Thank you.

[@Timber2Toothpicks]

Dennis- I bought the Wenew jig. I will be testing it out starting next week.

[@katekeough9819]

Have a happy holiday with your family much love from Nova Scotia

[@monteglover4133]

Thank You and Merry Christmas to you and yours There is a self centering dowel jig available in the US that is simple and easy to use except it’s not usable for the middle of panels.

[@kentneil7100]

Happy Christmas to you and your family brother

[@JayCWhiteCloud]

Excellent review as usual...Thank you and Happy New Year Dennis to you and your family...!!!

[@theeggman1341]

Merry Christmas Denis.

[@devildog2345]

Your videos are always my most anticipated wood working tool videos. I'm always excited to see them pop up in my feed. Thanks for all the work you do and know your time is appreciated by those of us like me.

[@Timber2Toothpicks]

Dennis, how on earth are you going to keep up on this new rush of cowling jigs and pocket hole joiners? Everyone is making them then remaking them. Jessem now has another new one. Man you are going to gro broke! Keep up your good work! BTW… You have a handsome family… and a dog!

[@Pilotlon46]

Thanks, Dennis. I agree with you, that more choices are better. I suffered a house fire this year, and every tool....from screwdriver to table saw....was destroyed. at age 77, it could easily be the end of my furniture making, but the "bug" will surely strike again, and I'm always interested in your tool reviews. Always top notch. I try not to look at your tool shop, however, the drool will short out my keyboard. 😂 Merry Christmas, and a very happy and prosperous New Year.

[@HookedonWood]

Wow, that does not sound good. I wish you all the best and try to see it as a new opportunity to create something great!

[@danielcookeb90]

Nice video comparison Dennis. And lovely outro with your family! Have a great Christmas and New Year and hopefully much to inspire you for Next Year! You make woodworking a more accessible and simpler process for everyone, by reviewing these tools and giving your views. You are going a long way to making every person into their own woodworker! Well done! See you next year!

[@HookedonWood]

Thanks Daniel. Have a great Christmas.

[@mehmetyucel4279]

Master, which one do you recommend? When we say I should buy it once.

[@pwisc2115]

Dennis, Sending you happy holidays, and thank you for sharing super cool stuff on your channel all the time. Best of luck to you and the family for this new year. Merry Christmas from Wisconsin, USA!!!

[@TinyWorkshop]

Happy Christmas to you!

[@Tdog500]

Thanks for all the work you do putting these videos together!

[@Armaghboy2250]

Another detailed evealuation of a tool. I really like watching your videos. Question: What was the make of the pants your were wearing?

[@cesargamez7384]

Saludos y muchas bendiciones para usted y toda su familia un abrazo muy fuerte para todos ustedes les deseo una feliz navidad y un próspero año nuevo 🍀🍀🍀❤️👍

[@frederickmichaud6783]

Thanks for a great year of helpful and fun videos Dennis! Happy holidays to you and your loved ones!

[@espressomatic]

Merry Christmas Dennis

[@roylucas1027]

Merry Christmas.

[@stanwiggins3423]

It is always a pleasure to watch every video you release Dennis, and I always find your ranking results and reasons to be the most reliable of any other KZbin content creator. I hope you have a safe and Merry Christmas and a Happy New Year and look forward to many new videos in the future.

[@jefferywright4204]

This video on the doweling jigs is excellent, Dennis. Your outro is simply superb as well. May you and your beautiful family enjoy a Christmas filled with the blessings of Jesus Christ followed by a prosperous New Year in good health. Merry Christmas!

[@ArtCakes]

Merry Christmas wishes for you and your family. from here in the Philippines. Love your videos. You have the best shop. Thank you for sharing what you know.

[@nynasfoto]

Hi Dennis, thanks for your grate videos ! Have you tested any drill bits with good quality? Looking for a set of Forstner bits with carbide, any thaughts ?

[@jamesryan5747]

I have seen a lot of adds for SpeTool router bits. Do you have any plans to test them?

[@wozzie1492]

Love your content, merry Christmas, cheers.

[@Mrdeodin]

Hey Dennis, have you taken a look at the new “bridge city” tools on banggood?

[@rossrobinson4834]

I have the Drill Pro, I do not recommend it. The bushings are not well aligned such that you can rely on aligning the dowel holes based on the sides of the jig and the grub screws are very low quality. I am always looking for a new one, thus watching this video.

[@PeterLukac-r9n]

What is difference between Veiko, Drillpro and Enjoywood brands ? Now ENJOYWOOD brand dowelling Jig is only available but it looks the same as DrillPro. Sometimes the same product under different names can cost 2x as much.

[@andre1987eph]

Correct me if I'm wrong: The fatal flaw in all these precision "Made in China" doweling jigs is their drill bit bushings are made of aluminum (and not hardened steel)? An aluminum bushing vs a steel drill bit is not going to fare well over time.

[@sedahi]

Just considering doweling jigs and watched the previous videos yesterday. How fortunate to see this waiting under the Christmas tree for me this morning! Happy holidays!

[@streak0r]

Your videos are so nice to watch and I hardly have any tools myself. it's nice to see what I should invest in in the future once I take woodworking more serious.

[@theaudiophilist1036]

Hallo dennis, can you please tell me where to get those Clamps from this Video? Thank`s a lot! 🤗

[@FrenchFarmhouseDiaries]

Very expensive in Europe and France not sure why so ill take a miss on this one

[@danazlin3409]

For those of us in the US, it would be nice if these tools came in SAE sizes. The metric versions would require too much retooling to be practical.

[@Z-add]

The version i have has a wobbling drill bit.

[@emmetworkshop2829]

Hi Dennis. I bought the silver WNEW on your recommendation - which as others have said I trusted completely. So glad that it still stacks up and I don't need to get jig envy over the new one! Have a great Christmas with your family and thanks for the amazing content. Ps. I just made your mitre saw fence with removable zero clearance block. What a difference!

[@yossiyaari3760]

Thank You. Great content, as usual. Happy Holiday season.

[@Philipk65]

This looks like a great dowling jig Denis. I need to check it out. Thank you for the video.

[@gotenianiki]

Hello Dennis, can you compare this jig with Dowelmax Joining System?

[@HookedonWood]

The dowelmax is another kind of doweling jig and even more into furniture joining. The Dowelmax is also more overbuild and of exceptional quality. I have had a Dowelmax clone, but from a bad quality, so not comparable from that point of view. But I did not liked the way it worked. I find this easier. But again, when you want to make chairs, the Dowelmax is hard to beat.

[@gotenianiki]

@@HookedonWood Thank you for the detailed answer.

[@jonathangaliano2617]

What makes the Dowelmax more gears towards furniture making?@@HookedonWood

[@McCartWoodworks]

Thank you for these reviews they are great. I have a question about your workbench plans and sent a couple messages via your site but have not gotten a response. Hope to hear back from you soon so I can purchase those plans. Keep up the good work.

[@HookedonWood]

I sent you the cutlist last monday and this morning. Do not know why You didn’t recieve it?

[@McCartWoodworks]

@@HookedonWood I will look through my mail again, maybe gmail is tossing it to another folder. Sending those items was well beyond what I was asking for and that alone solidifies that I will buy the plans. Thanks again and hopefully I can find the email.

[@McCartWoodworks]

@@HookedonWood found it in my spam folder for some reason. Thanks again and look forward to buying your plans.

[@HookedonWood]

Great!

[@scottfoster2203]

Where can I get one of these jigs?

[@kubilayylmaz1716]

Hi Dennis, where do you buy oak systle multiplex or mdf? Baltic bearch playwood cant find in holland. I wanna make furniture but can't find around me interior eiken kleur multiplex. Many thanks

[@HookedonWood]

I buy these things at AF.nl Not the cheapest, but good service. But of course, I do not know if they are in your neighborhood.

[@kubilayylmaz1716]

@@HookedonWood thanks. I know there sometime i do online shop from baptist. Its far away from me to purchase wood. Fijne kersdagen.

[@3dmazter]

Great video but man You scared me to death with the cut scene of the channel . that sound got me.😅

[@bobbyj0708]

I just got the Drill Pro a few days ago and even though it's the lowest rated of the three doweling jigs I really believe you couldn't go wrong with any of them.

[@leif913]

Beautiful video as usual. Very informative. Would buy this jig if I hadn't just bought one recently. Happy holidays.

[@dariushmilani6760]

Another great vidoe. Have great holiday to you and your family.👍❤

[@sral128]

Tanks

[@Goggalor624]

Love these videos but I'm honestly a little scared to buy stuff from Banggood. I've read SO many horror stories about them. Curious if others have purchased these items from them and how it went.

[@3frogltd987]

I have not purchased any of these doweling jigs yet, but have had good results from other tools/jigs from Banggood. You do need to study their listings well before ordering. The prices are a little deceptive, such as the Wnew dowel jigs. They show the primary jig but the low price listed is for an accessory kit. Also make sure the unit ordered is from the same warehouse as listed with the product pictured. They often have multiple listings for the same tool but prices vary depending if it's shipped from US, CN, or China.

[@miroamancio4591]

Feliz Natal e Prospero Ano Novo pra vocês também!! Direto do Brasil.

[@VLOGS-skyun]

吴新TOOLS Wnew tools Great

[@ckonczey]

Where is it available?

[@markpapp8784]

Expand the description - it's at the start of the sixth paragraph. "WNEW Doweling Jig with disk"

[@HookedonWood]

you can find it in the description! All the best and merry Christmas and Happy new year!

[@paradiselost9946]

in my experience... its finding a drill that can actually cut a hole accurately without tearing thats the challenge.

[@badeth123]

Dennis, I am visiting hoofddorp from America, is there a place I can Find used woodworking handtools(hand planes etc), Or, New woodworking tools close by Town, Thank you.

[@zobairtokhytokhy2873]

First of all, I want to thank you for the time and effort you put into making your videos; I know it's no small task. However, I am disappointed that you are now charging nearly €50 for access to the plans on your website, especially since they used to be free. Many viewers like me support your videos and you already generate revenue through advertisements on KZbin. I've noticed that your channel is becoming increasingly commercial, with income from both affiliate links and the sale of your plans. I understand that quality content has value and that creators deserve fair compensation, but I hope you can find ways to keep your content accessible to everyone, perhaps by offering a differentiated pricing model or special deals for loyal followers. Thank you for your understanding, and I hope you take this feedback to heart.

[@dennisspeer8077]

Hello Dennis, do you have some issue with Chinese manufacturers stealing the engineering from other companies and then making a knock off version of the product?

[@paullalekna5478]

You mean like many companies from many other nations do?

[@hdwoodshop]

I think you need to rename your channel. Seems like you’re hooked on China. 😂

[@jknierim55]

Hello Dennis, after getting to the banggod app or the tnew I could not find the modelmyou are reviewing, with the big wheel. Does it have a specific modelnumber? Thanks from Spain Joaquin

[@HookedonWood]

www.banggood.com/custlink/vmGHeUI1Rz This link will bring you there!

[@GolemGolem-h4m]

Obviously a JessEm knock off. No way I'm falling for this schlock.

[@balabuyew]

This wheel does not provide a sufficiently wide base, when you lay the jig onto a small thickness panel. You reviews are not honest.

[@wannerskog]

What do you mean?

[@paullalekna5478]

If you don't like it, get yourself some plywood and 6mm Aluminium sheet, and make your own, and a video to show us all how good it/you is/are

[@markpapp8784]

Another fine video; thanks. I keep putting off buying a dowelling jig, thinking I'll buy a Domino. The reality of my bank account keeps putting me off buying a Domino... Merry Christmas!

[@HookedonWood]

Dilemma's All the best for next year!