THE MOST ACCURATE SEMI-AUTO 22LR EVER MADE! A 10/22 WITH ATTITUDE

[@chriswalls6667]

Built my 10/22 target rifle, Hogue over-molded stock, 18” ER Shaw bull barrel, lapped the barrel with 300 rounds of subsonic CCI ammo, Ruger enhanced trigger with a nylon recoil buffer. Installed a Hawke Advantage 4 x12 x 40 scope, five shot groups at 50 yards, can cover with a quarter using standard CCI ammo.

[@Dogleg1957]

Should shoot better. Ever thought of upgrading scope. My 22 hornet shot 1.25 @ 50 yds with Simmons scope. I had a Leopold 1x5 VX3 I bought used and with premium Ammo I was just under 1 in. Still great squirrel gun you have as is, but be nice to have that 10 shot ragged hole bragging rights

[@pinslayer4579]

Nice work !!!! Nice rifle. Don't have near that much in mine but it shoots as good as it's 67 yo owner is capable of.

[@joed3264]

I had a Kidd rifle 9-10 years ago. Shot pretty good. Sold it along with 5 Anschutz and a USMC 40X bought at the CMP South store. Wish I kept some of the Anschutz. Built a 10/22 two years ago when I started shooting our .22 Sniper Match again. I used a Feddersen 18" barrel and a Kidd single stage trigger kit. Put the action in a Titan stock. It is as accurate as my Bergara using Eley Benchrest Precision. The Bergara likes the same ammo. I stopped using all SK ammo as I would get 1 or 2 flyers in every box. That hurts at the 200 yd targets.

[@PursuitofAccuracy]

Yeah eley is hard to beat at distance

[@jimmytimber7074]

I have had one for a few years. One of my favorite rifles. Squirrel slayer

[@PursuitofAccuracy]

Oh yeah

[@Dayattherange]

They are great shooters BUT you sir are a fantastic shot also

[@Dogleg1957]

Sweet!! Out shoots my anschutz 22 hornet! My 15 min was one shot a fly at 50 fish canyon about 1984 when I had young eyes

[@joshtalbot1086]

I have a supergrade that I love. Have similar results. But I built my wife a 10/22 with a volquartsen barrel and trigger in a brownells receiver in a houge stock that shoots as good or better than my kidd. I had to freeze the barrel and heat up the reciever to get it in. Lots of fun

[@PursuitofAccuracy]

Ive had to do that quite a bit

[@ibrahim10910]

Amazingly accurate semi auto .22 rifle.

[@johnwhitty9069]

Love it. Thats the type of groups I get with the 1022 I built. It's crazy what you can do with a 1022

[@PursuitofAccuracy]

Surprisingly accurate and fun

[@kentdavis7438]

That is fantastic shooting ! Always impressed.

[@PursuitofAccuracy]

Thanks Kent

[@Siafu66]

I have an early super grade that has the threaded barrel into the receiver. It also came with the McMillan stock from the factory. Kid really makes a fantastic rifle. I have many in the safe and I'm not sure what's the scope it has on it but I think it's a Trijicon. It's probably my favorite rifle. It will always be in my collection.

[@davidjefferis5832]

Glad to see your review. I just bought a Kidd Super Grade this spring. I live in the remote west, so unable to get really good ammo. Just found some SK Rifle Match and these really shot. Third group out of the gun was 1/4 inch. I really enjoy it.

[@PursuitofAccuracy]

Awesome

[@furion..]

I had a Norinco copy of a Browning SA which fired a .25cal one-hole group after 5 RWS red box standard velocity rounds at 40yds - then I traded it off. I still live with regret. I'm going to look into this *KIDD* SG!

[@jeffmontgomery1905]

I have the Browning Belgium made shoot shorts only. I turned down a chunk for it. Dang good squirrel rifle I keep it put up now.

[@perdidocamaronero5400]

I have a Volquartzen/Ruger 10-22 I play with the only Ruger part is the receiver and magazines. I learned one thing out of the four magazines I have one will cause shots to go wild. It must deform the rounds on the trip to the chamber and it doesn't do it every time. Something is definitely different about it. The Kidd is pretty impressive and you just can't help but shoot it fast.

[@PursuitofAccuracy]

Yeah mags are important with the 10/22's and it sure is hard to not shoot it super fast

[@TheSaintsAdvantage]

Yes. I built my 10/22 with kidd 20in Bull Barrel and Kidd 2 stage trigger. Boyds pro varmint wood stock. TI left handed charging receiver. It is as accurate as my CZs...it is HEAVY. I enjoy shooting it but I tend to shoot to fast with the semi auto.

[@nk-dw2hm]

I considered doing a chassis, but went with a boyds also for looks. Now I wonder if it could have been even more accurate with a chassis, it's already more accurate than I thought it could be but still wondering what if

[@ryanyasecko3717]

Love the kidd that I built over time from a stock 10/22, it's insanely accurate. The only grudge I have is with Kidd's customer service. They've had my rifle twice for cycling issues but just sent it back saying it's fine and didn't really care to look in to the issue.

[@PursuitofAccuracy]

Interesting.

[@ryanyasecko3717]

@@PursuitofAccuracy if you put a factory ruger bolt in the gun it runs fine, put the kidd bolt back in and it's nothing but cycling issues

[@PursuitofAccuracy]

@@ryanyasecko3717 hmm yeah thats crazy

[@haroldwaggoner9875]

That rifle flat out shoots ! Good job

[@gordy1961]

I had a Voere .22LR semi auto, was the most accurate rimfire I had and regret getting rid of it for a bolt action CZ452, one hole groups every time at 75yds without trying with cheap ammo like magtec & cci sub hp. I did put a thumbhole stock on it from a air rifle that I converted myself which helped but what an accurate rifle outshot a tuned 10/22 by a country mile & never had a misfire with subsonics.

[@tomcatpeterson5990]

I love my Kidd 10/22. It's as accurate as my cz457s, meaning I'm the limiting factor. It's also not as picky about what ammo I feed it. My only problem is I shoot it too fast and mess up my groups. Bolt action forces me to concentrate on every shot.

[@PursuitofAccuracy]

Yeah i end up shooting it way too fast as well. The video shows that pretty well haha

[@lewisrice3741]

I guess shooting to fast could be a problem and mess up a group or could it be the gun???? Beagleman

[@nk-dw2hm]

@@lewisrice3741 if the flyers go away when you take more time to steady between shots and ensure your fundamentals are sound (breathing, alignment, etc) then it's easy to identify the cause as speed

[@jeffmontgomery1905]

Only squirrel hunt I'm not sure what the factory trigger was pulling but this new trigger is awesome. I can shoot quarter inch groups at 50 yards this is all I needed. Great trigger but expensive.

[@jeffmontgomery1905]

Excellent job I have the voltquartsen trigger this was what I needed.

[@cameronfleetmartinette9957]

awesome josh. keepin well rounded. ive got a kidd build off a factory receiver. kidd is so accurate. glad you got one bro.

[@PursuitofAccuracy]

Its been great

[@lesalbjerg5648]

I love my left-handed 10/22. It is very accurate with my lot tested Ely!

[@davejones3923]

What one do you have ? I just purchased a LH 10/22 completion . What scope are you using ? I don’t have a scope for it yet

[@nk-dw2hm]

@@davejones3923 I have a diamondback hp on mine and it's great for 100 yards+ (best glass I've found for under 200)

[@lesalbjerg5648]

@@davejones3923 I think the competition is the only one they make in left-hand. I have a Tract scope and it is awesome.

[@davejones3923]

@@lesalbjerg5648 Hi Les thanks for the reply. So I’m guessing you have the 16” barrel too ?

[@davejones3923]

I probably won’t be shooting past 100 yds with still checking around for an Ideal scope

[@donaldarel579]

Thank you for finally doing the kidd supergrade. That gun deserves more than 8 minutes Josh . Give us another 20 minutes , PLEASE . I Love my supergrade in the KIDD chassis

[@PursuitofAccuracy]

Thanks. More videos coming in the future

[@couespursuit7350]

Thanks for showing us the KIDD super grade. been thinking of getting one but kind of busy doing good work with my RIM-X. Have 2 standard KIDDs and they are both shooters.

[@PursuitofAccuracy]

Sounds like you got a real nice collection going

[@lee-ux7si]

Perfect accuracy i really like

[@DavisInDuval]

I just bought the magpul stock (after much deliberation), Kidd 762 threaded barrel, Kidd buffer, Kidd bolt with spring kit. Time to upgrade my 17 year old 10/22!

[@majorrev8690]

How do you like that stock? Ive been putting off replacing mine, but have my eye on the Magpul. I replaced my trigger with the Kidd 2 stage, added their viton buffer tube, on a Magnum Research 10/22 receiver, carbon fiber tension barrel, topped with a Rapid Reticle Evolution 22LR scope. It'll shoot about 1/2 moa with good ammo on a good day. Best part is everyone loves to shoot it.

[@kevinsmith301]

If you ever find an MOA Corp .22 rifle on Gunbroker buy it! They are like a 10/22 and use all the same parts but lights out for accuracy!! They are out of business now but made enough that there are a few on the market every now and then.

[@PursuitofAccuracy]

Will keep my eye out

[@davej3487]

I had a Ruger 10/22 back in 1967 when I was 12. I get a brick of 500 rounds from K-Mart for about $2.50, a lot of money for a kid. Lived on an old farm and we had an old chicken barn that was over 175 foot long and I built a 50 yard cinder block back stop and would shoot for hours. I reset the barrel to the receiver maybe 10 times before it was right. Then we GLASSED it in with epoxy. I took a hard rubber mallet and knocked the front sight a bit to the right. When all was done I could shoot 10 rounds in 1 hole that a dime would cover. My eyes are not that good but I just bought a NEW 10/22 Nov 27th 2024 and waiting for a day to go out. Bad thing about a 10/22 is you can not bore sight it to a scope.

[@Johnny_Pballs]

First time watching the channel and I'm thoroughly impressed by your shooting! 👍

[@PursuitofAccuracy]

Thanks!

[@gpmcfm]

Same here

[@bltefft]

i put a Kidd barrel on my 10/22. It is a tack driver.

[@wowguy3562]

Nice groups, thanks Josh and good shooting brother

[@PursuitofAccuracy]

Thanks brother

[@paulthelefty]

Dayum! Nice shooting! Great rifle!

[@CyclopsJoeVideos]

Great shooting Buddy !!!! That gun kix azz

[@PursuitofAccuracy]

Thanks brother

[@TheDollarSportsman]

That was really fun to watch 😎. Excellent shooting and amazing gun! I’d love to have one of these

[@PursuitofAccuracy]

Thanks brother

[@4catsnow]

Better barrel/chamber. Better trigger, Better scope mount holding better glass,, better stock,, better rifle rest.....5 rounds into 3/8 of an inch at 50 yards with CCI standards...Ruger could have done that as an upgrade long ago ..They would have tripled the sales on the thing..

[@nk-dw2hm]

I doubt they realized there would be a market for $3000 10/22s

[@4catsnow]

@@nk-dw2hm The most successful .22 rifle they ever marketed.. well worth experimenting with an upgrade like that..And they probably could have figured out a way to keep the price down..They were on the right track with the 10/22 Target with the bull barrel..but they went no farther,, for years with it..

[@lewisrice3741]

Ruger is only interested in one thing that is quantity not quality move lots of guns and make lots of money. That is a shame because at one time they made a great rifle back in late 60s early 70s Beaglemanl

[@alanmeyers3957]

@@4catsnowyes, they should’ve at least sourced a good trigger.

[@4catsnow]

@@alanmeyers3957 In they're defense,, they were marketing the BX Trigger ...put one in 10/22 number two...The trigger in 10/22 number one want to Clark in Louisiana while all the stuff above was happening..

[@RangeToyz]

Thanks for the video! I just bought a FJ Feddersen 10” barrel for a Charger style sbr. The price was right and now I know their accuracy is excellent! Seeing this I now want an 18” barrel for another custom 10/22. I’ve got a Bergara B14R, but this looks like it’s semi auto competition.

[@advancespark]

I have the FJF 10" fluted bull barrel too, but converted the pistol setup to a rifle because ATF messed with the pistol braces. NRA won the lawsuit against ATF for their members, so maybe I'll build a pistol setup again. How would you compare the accuracy of your 18" FJF 10/22 to Bergara?

[@RangeToyz]

@@advancespark I’m still probably months out from buying the 18” barrel and every other part to complete a second 10/22 besides the 10” one I’m working on right now. I’m still not sure which stock/chassis I want to get for it. Maybe a Woox if I can justify the money. I’ve got a 250 yard video shooting steel plates, but I need to do some 50 yard groups with IBS targets and different ammo still with my Bergara. I’m in a private Facebook group with many members and they definitely have sub moa groups consistently. A lot of them compete and use MDT or MPA chassis. Some forums said the FJF barrels are more accurate than Kidds. Sounds like the stock screw torque is very important on a 10/22.

[@RangeToyz]

@@advancespark I’m still ways out from putting together an 18” 10/22. I just submitted my Form 1 for my 10” build. I’m in a B14R FB group with over 5000 people and they consistently get sub moa groups, but a lot of them are using MDT or MPA chassis and some even swap barrels. I have a video of mine at 250 yards using cheap Federal Automatch shooting a 16” and 12” metal targets. I should do some 50 yard groups with better ammo and see for myself the results. For my 18” FJF 10/22 build, I think I’ll use my Charger receiver, get a KIDD bolt, trigger, charging handle, Arken EP5, Cat/Sr/A1 suppressor, but I haven’t decided which stock to get yet. Maybe a WOOX if I can justify the money, or a Victor Titan. Any suggestions?

[@nicomeier8098]

That is some nice shooting man!

[@philrainey805]

I have the Supergrade in a KRG Bravo stock, it shoots as good as my Rimx rifle. The Kidd 10/22 is impressive!

[@michaelsoutter7910]

I have one set up the same way. They are impressive.

[@boltgun7266]

What modifications did you make to the bravo chassis to allow the supergrade to fit? KRG doesn't show their stock to fit the supergrade out of the box? Thanks

[@PitFitHuntFan]

I have highly customized 10/22 Kidd Vq lightweight hybrids for hunting and casual target shooting. They are very accurate outperforming factory target bolt .22lr rifles and can hang in there with the custom bolts. They are both carbon fiber barrels one in a 12.375 inch vq carbon fiber and one in a 16.5 inch. Both have 2 stage Kidd triggers and Kidd bolt assembly both using the high tension spring guide rods. They also both sit on a Fab def sfoldable stock for light weight. As long as they are handled well because of that stock to be mindful of the flexibility of such synthetic no aluminum pillar stocks they shoot under .5 Moa with a variety of quality ammo. 😁 I’ve seen highly customized dedicated 10/22 bench Guns with 28inch custom Lija barrels that have won over custom Annie’s. That was about a decade back. There were no vudoos and bergas back then here in my country. Wonder how they would do now.😁

[@lewisrice3741]

There's no way that gun will outshoot my cz457s I beat these 10-22 on a regular basis. Not for me I bought one and gave it away really. Beagleman

[@PitFitHuntFan]

@@lewisrice3741 it’s possible specially depending on ammo and setup for bench shooting. And like I said factory bolts though at that time I was active at the ranges... it was still the older model czs and these were regular ranges 50 to 100meters. Mind you that the 10/22s I am talking about are highly modified with premium parts.

[@richardmattix5322]

It`s outstanding

[@Garysalunatic]

Float the stock barrel and get some epoxy around the corners where the receiver and stock meet (use car wax on the metal to aid in releasing) and I cut the size of groups in half. 10/22 carbine went from 1.5”@50 to .75” 10/22 target model went from 1” to .5” Make sure you torque the action bolt to a proper torque. Mine is best at 20 inch lbs. (ft lbs?) I use the fat wrench for that. Cheapest upgrades you can get. Only cost me the $5 for the 2 part epoxy. No need for fancy glass bedding kits with just a .22LR

[@sylviahofer1246]

Wow! Just wow! Not at all what I expected, that's for sure.

[@PursuitofAccuracy]

Thanks

[@brendan4ever]

And it’s threaded and for a can! Would be good to see a silencer on the channel sometime...

[@PursuitofAccuracy]

If only we didnt have to jump through hoops to get em. I need to get one but the process kills it for me

[@biagiocozza8875]

Great video Josh. Question, is that the light Kidd barrel, or heavy? Oh one more thing, did you bed the gun?

[@PursuitofAccuracy]

It came to me bedded into that stock already. I believe it is the heavy barrel

[@RimfireSS]

Don't do the Calvin Elite, I returned mine. It has adjustable shoes but it's really awkward, the trigger pivots also and moves on you as you shoot, never stays in the same place. It really weird 😕. Also even when adjusted all the way down it would only go as low as 2lbs. Thats a common problem i hear. Itried all the Triggers, 10/22 triggers just have a different feel to them, I actually settled on the Kidd 2 stage, and I'm a single stage guy too. I got the 8oz, 8oz model and its the closest trigger I could find that had a similar feel to the single stage Timeny in my CZ 457. Love that trigger. Yes it has the first stage but once you get to the second stage it's just like the CZ Trigger.... well kinda. Solid wall with no take up and a light, sharp clean break. You will love it. Just my 2 cents, take it or leave it. But I'd take it, LOL

[@PursuitofAccuracy]

I actually got both kidd triggers with it. I like the feel of the calvin elite but need more time behind them to make a decision

[@RimfireSS]

@@PursuitofAccuracy Let me know if u pass on the Kidd Single Stage, I’d like to try that one out, damn triggers are expensive.

[@CaseyD406]

Never new a 10/22 could shoot so well

[@PursuitofAccuracy]

Me either

[@glundgren2097]

Do you ever talk about the cost of these upgrades! My set-up is over $1k and it's not as built out as that.

[@curte7739]

I have a 10/22 and it's very accurate The key is great optics and ammo, Don't buy your cheap coffee can or brick of ammo at the big box stores buy decent quality ammo, 22 ammo is inconsistent at best especially the cheap stuff and optics is probably even more important. That being said to prove a point I also have a Mossberg 702 plinkster that I paid a hundred bucks for I put a good straight 4x scope on it at 60 yards I can put my shots inside a 50-cent piece off the bench rest not bad accuracy for a cheap 22 but I also use quality ammo and have good optics on it.

[@bbeckelman2275]

I've been shooting and competing with a Kidd 10/22 for over a year now, and absolutely love it. Very accurate and consistent. I have found though that it does not like to eject flat nose ammo...including the Eley Match. Let me know if you find the same. Great content.

[@Jeff-mv4yy]

Mine does not run Eley flat nose well. However Eley Semi Auto22 Benchrest shoots as good as Center X.

[@joed3264]

@@Jeff-mv4yy yes it does. I bought a case of a good Lot number of Eley BR Precision.

[@chrisb9478]

I just bought a FJ Federson 16” threaded fluted bull barrel for my 10/22. I have a Riton 2-7 on it. It was quick to get zeroed & it cuts holes at 50yds. Haven’t tried 100 yet. Very accurate barrel though

[@mikemcmanus116]

I have a Fedderson 16" bull non-fluted barrel, everything else is Kidd and a Titan stock. Nothing Ruger left, not a screw or spring. I went with Fedderson barrel at the time because the Kidd barrel was pressed fit and the Fedderson was slip fit. I would have had to bake the receiver and freeze the barrel. Then get out the heavy rubber mallet to install the Kidd barrel. More drama than i cared for. Also used the Gunsmither V block to attach the barrel/receiver.

[@stedyone1090]

Nice rifle Nice shooting

[@PursuitofAccuracy]

Appreciate it

[@Timmerd888]

Wow nice video dude! 🤘🏻

[@kenjackson5938]

That was better than some of your bolt guns. Maybe you should take that to the next PRS

[@PursuitofAccuracy]

@@kenjackson5938 small groups don't win prs matches

[@joshbrekke6374]

Dead Eye!! Awesome shooting!!

[@PursuitofAccuracy]

Thanks

[@hotchihuahua1546]

Impressive !

[@garygates5679]

BIG JUMP JOSH ...!!!!!! GREAT VIDEO ...!!!!! JOSH ...! ! ! A W E S O M E S H O O T I N G . . . ! ! ! ! FANTASTIC VIDEO ...!!!!!!!! DOUBLE G. HERE ...!!!!!

[@CarlPapa88]

Don't know if I've watcjed this one before, but either way. That is an accutate 10/22. Bought my 1st (basic blued OEM with a wood stock) a couple years ago and this is the end goal. On maybe 1/2 that budget at least haha

[@PursuitofAccuracy]

Appreciate ya watching

[@brianolson1211]

thats great shooting on that kyl target at 94 yards, impressive

[@PursuitofAccuracy]

Thanks!

[@melissasmess2773]

Nice, thanks, earned another subscriber!

[@PursuitofAccuracy]

Thanks!

[@bartknight8669]

Got a 10/22 I put together back in the 90’s shoots lights out

[@PursuitofAccuracy]

They are super fun

[@TimBiagi]

Good video, very impressive, I wonder how the Clark Custom and the Volquartsen compare?

[@PursuitofAccuracy]

Maybe a future video?

[@Jeff-mv4yy]

Btw Josh, I was able to adjust my Kidd single stage down from 1.5 lbs to 14 oz bump safe trigger .

[@PursuitofAccuracy]

Wow nice

[@damingrail3655]

Love my KIDD.. I am not running super Grade but I am running the KIDD 20" Heavy SS..

[@PursuitofAccuracy]

Nice

[@Lowballinoutdoorz]

Sweeeeet man I had to watch this one... I mean it's not ur cz or ur new bergara haha... but ya love the 1022

[@PursuitofAccuracy]

Haha thanks

[@Stickbow1980]

So you basically have to re- build the entire rifle to get that accuracy ? The savage mark ll will do that all day in stock form... I got a couple marlins that also shoot one tiny hole at 50 with the ammo they like.

[@PursuitofAccuracy]

Thats a as built supergrade from kidd. Ive never seen a mark II that will shoot .2’s all day

[@dukebeach1]

Phenomenal shooting.

[@PursuitofAccuracy]

Thanks

[@hawkeyeinthehouse2995]

GREAT RIFLE AND GREAT SHOOTING. 😉😁👍 I've got 2 10/22s, built one for carry (hunting) the other is kinda HEAVY so it's my bench rifle.😉😁👍 Someone else built the HEAVY one, all I had to do is mount a nice high powered scope for hitting small things FAR AWAY. 😁👍 I had a FIRE at my house 😯😵‍💫so I will let you know later how BOTH SHOOT.😁👍

[@rogerthomas1212]

Thanks for all the great vids Josh. What is the trigger pull on that Kidd super?

[@PursuitofAccuracy]

Its the kidd 2 stage and was set around 7 ounces on the break 😁

[@johnpawlowski804]

Awesome Video

[@PursuitofAccuracy]

Thank you

[@rickbrickles1410]

I think the model 74 would give that 10-22 a run for its money 💰!!!!!

[@johnpawlowski804]

Awesome, get some 25 round mags, and let the fun begin 😎👍

[@PursuitofAccuracy]

Im scared to lol

[@johnpawlowski804]

The action will run like a sewing machine, bang, bang,bang

[@PursuitofAccuracy]

@@johnpawlowski804 scared financially

[@speedracer4588]

Would love to see how it groups at 100 yds?? Some benchrest competition is that distance

[@PursuitofAccuracy]

Will give that a go as well

[@bucketofguts]

Hope you have a case of that ammo! Mabe 2.........

[@PursuitofAccuracy]

I had only what Chris would let me steal which wasn't much

[@stevemachemer5763]

I put a KIDD barrel on mine and use it for f class prone 50 & 100 yds.

[@PursuitofAccuracy]

Nice

[@stevekiemele995]

That’s an amazing shooting rifle.

[@PursuitofAccuracy]

Thanks Steve

[@ericlance9057]

Very very impressive!!!

[@PursuitofAccuracy]

Thanks Eric

[@stonejr74]

Is that rifle how you got it directly from Kidd or did you do anything to it? How long is the barrel and is it a threaded barrel?

[@PursuitofAccuracy]

I believe its 20" and threaded. It is exactly how it comes from kidd

[@stonejr74]

@@PursuitofAccuracy thank you for the reply, do you think there would be a big difference between the 18-in and 20 inch barrel? I'm planning on ordering the same rifle soon and just trying to figure out some of the little details. The main purpose is to use it for kyl shooting and shooting for groups at 50 and 100 yards. Do you have any experience with Aquila copper plated 40 grain? Was wondering how accurate it would be through rifles like that one.

[@jakester-lr8dm]

Awesome !!

[@charlesmckinley29]

Very nice shooting

[@richardlewington5964]

Thanks for showing us how accurate these rifles can shoot,i was just looking at the Kidd rifles this earlier in the week, i am interested in the white card that seems to be attached to your scope, i have been trying to train myself to shooting with both eyes open and need something like this ,did you buy this or did you make this up yourself ? thanks p.s i am waiting patiently for a T1X build

[@PursuitofAccuracy]

I bought the cards. I write my elevation dials on the card when shooting prs / nrl

[@timothytrexler1896]

Does it have a button to push to keep the boat open for like competition use

[@bep357]

How much does it weigh? Sorry if I missed it. Is there anything for 1000 that comes close?

[@e.l.robbins5614]

Great shooting, and I want one. Give up the goods on that rifle. Where did you buy the rifle?

[@PursuitofAccuracy]

You can get them directly from Kidd. Built to order but they have a super fast turn around time on then.....like a week or two

[@22guru]

I got one. You will really like it.

[@anthonykhalil70]

Thats impressive for a 10/22. Can't have in Australia. But a 10/22 was my first 22 when they were legal.

[@joed3264]

You guys gave up your guns. Your prison colony country is as bad as England. lol

[@anthonykhalil70]

@@joed3264 there are actually more guns now than before buy back. But no semi autos. You can but it's a hassle.

[@joed3264]

@@anthonykhalil70 Yes, I read the rules. Similar to England's. Were your ancestors in the prison colony? lol Eleven convict ships arrived in 1788.

[@anthonykhalil70]

@@joed3264 exactly

[@SEAKPhotog]

I've been thinking about grabbing one of these. You're not helping my bank account 🤣

[@PursuitofAccuracy]

Lol sorry

[@jonathanwren6409]

When the long range shooting coming for this

[@PursuitofAccuracy]

Got to get a mount so i can get some moa out of it and i will be shooting it long range

[@lawrencehawk5179]

I have a GM 17" Heavy Tapered Sporter, she shoots great. Also have a Pike Arms match grade bolt on a Deluxe Walnut stock. That the 20" or 18" you have on yours. Looks like the bull version, not tapered one.

[@PursuitofAccuracy]

It is the bull barrel, straight taper.

[@lawrencehawk5179]

@@PursuitofAccuracy try some bulk ammo. Auto Match, Thunderbolts, & Winchester white box. Also shoot through a chronograph to see what the barrel can do. 💨

[@PursuitofAccuracy]

@@lawrencehawk5179 im out of state training so I didnt bring any of the bulk ammo I have with me. Just match ammo

[@lawrencehawk5179]

@@PursuitofAccuracy oh ok. Still never fired through my GM. Them barrels, they bentz chamber like the Sporter I have?

[@johnpawlowski804]

Kidd 22 rifles are Fun😎👍

[@PursuitofAccuracy]

They are

[@SpyderGT]

Finally! I love my Kidd Supergrade! It’s more accurate than my Tikka T1x with ec tuner and best setting. I put Victor Titan stock. Had a few groups under 0.5 moa at 100 yards. Hit the 12‘’ target at 500 yards 3/10 with Arken EP5. Now I just put Tract Toric on it with 13 mills mount and I have enough for 1000 yards)) will try that soon Thank you for videos!

[@PursuitofAccuracy]

Thats pretty good. Love my tract scopes.

[@SpyderGT]

@@PursuitofAccuracy I purchased it for Tikka Tac A1 but before that I want to set my own record with Kidd. )) On Tikka I using Athlon Ares ETR, I know you like it too. So, then I gonna put Ares to Kidd.

[@DaMadMardigan]

My Kidd shoots lights out, change up your stock to a Victor Company Titan.

[@PursuitofAccuracy]

A stock may be in the future

[@earlnoelker8462]

Very impressive

[@PursuitofAccuracy]

Thanks Earl

[@gregclark3214]

Looks like a magpul stock. Wondering if rifle has one receiver screw or two.

[@PursuitofAccuracy]

2

[@gregclark3214]

I didnt know the magpul stock accommodated a second receiver screw.

[@keithkriger722]

Enjoy your videos this one has me checking out Kidd 10/22. I am wondering what your thoughts about 22 mag and if you done any accuracy testing with same

[@PursuitofAccuracy]

I like 22mag in general but havent tested it for accuracy like i have with 22lr

[@larryhardy3449]

I've built quit a few 10'22's with attitude just maybe...maybe a purpose built Vudoo type barreled action rifle can get around them. But for the money. ...I don't know. A purpose built 10-22....there a tuff rifle!

[@PursuitofAccuracy]

The bolt guns have the inherent advantage of better sd and es with good ammo. They dont require gas to operate the bolt so they will always be more consistent in that category

[@bobarganbright180]

I have shot a lot of elr rimfire with a lh cz452. Considering the limited accuracy of the ammo, a good center fire would be much better for the money, if you want really hit a target.

[@PursuitofAccuracy]

Depends on the goals i suppose. If your looking to shoot past 600 then yeah centerfire is where its at. But lots of fun to be had at 500 and in with a 22lr

[@fieldpro5041]

great shooting as always brother

[@PursuitofAccuracy]

Thanks

[@charlesbull8818]

Does Kidd make a 22 mag barrel?

[@richprascher2843]

That is awesome. I'm working on an old 1022 with a volquartson carbon fiber barrel. I've trued the bolt face, replaced the trigger and bedded the stock. It won't come close to those groups. Any suggestions what else to try?

[@PursuitofAccuracy]

What all ammo have you tried?

[@richprascher2843]

@@PursuitofAccuracy cci standard ,sk standard plus, federal premium and a couple of others. Sk is by far the best. Nothing to exotic.

[@kevinsmith301]

Try Eley and Lapua. Choosing the right ammo for your .22 build is a rabbit hole that takes time. When you find a lot that works buy it up!

[@jayba4345]

Where can you get these in Canada?

[@marklee4222]

Why aren't you adjusting your scope? Your hitting consistently at 7 O'clock. Great grouping.

[@PursuitofAccuracy]

If im demonstrating accuracy of the rifle sometimes it helpful to have it impact off center so i keep my same aiming point without impacts disrupting it