The MOST DIFFICULT Craft Material To Use!

♥ How to Use Milky Hitohada Gel ♥ • DIY SQUISHY KOALA!! Ma...
♥ How to Use Transparent Hitohada Gel ♥ • BEST Transparent Resin...
♥ 33 Squishy Hacks ♥ • 33 AWESOME SQUISHY HAC...
Enthält Werbung durch Markennennung / Contains advertisement due to visible brand logos
Foamy Hitohada gel is the often forgotten third option when it comes to making DIY squishies. It's a two-part polyurethane foam that cures extremely quickly, compared to the 48-36 hours of milky and transparent Hitohada Gels. I've used this one before in a video and found it very difficult to control. I decided to revisit it again and this attempt was equally tricky but I did learn a bit more about the material. You only need to pour 1/4 of it into the mould as it expands a lot while curing. The foam can't be touched after it's been poured because the texture will collapse. It's not ideal for very small "sticking out" details like ears. The final piece can be coloured with paint or pastel dust, and I recommend the latter the preserve the slow-rising qualities of the foam.
#diy​​ #resin #japan
♥ Shopping Links ♥
It seems like foamy Hitohada Gel is out of stock everywhere. I'm not that surprised as I can't imagine there being a huge demand for something so difficult to use. The other two types of Hitohada Gel can be found Etsy:
Milky Hitohada Gel: www.etsy.com/l...
Transparent: www.etsy.com/l...
Polymer Clay: amzn.to/3sKZ1YM
Silicone Putty: amzn.to/3lvfKuV
iBloom Squishies: squishy-japan....
DISCLAIMER: Amazon products are affiliate links which means I receive a very small commission if you buy it through here. I do not receive commission for links to Etsy or any other online store, though of course I still link those if I purchased a certain item shown in my video that viewers might want!
♥ More Hitohada Gel Videos ♥
Injecting Colour in Clear Squishies - • Can you inject color i...
Puni Gel vs Hitohada Gel - • DIY TRANSPARENT SQUISH...
Best Transparent Resin Review - • BEST Transparent Resin...
Best and Worst Jelly Resin - • Best & Worst Jelly Res...
♥ My GERMAN Channel! Cute Life Hacks DE ♥ / cutelifehacksd. .
♥ Cute Life Hacks Channel ♥ / cutelifehacks​​​
♥ TikTok English ♥@maqaroon
♥ Instagram ♥ / maqaroon​​​
(c) Joanna Zhou 2022
Contains Music from Epidemic Sound (www.epidemicsou...​​​)
This video is not sponsored
Contains affiliate links

[@_.-._.-.]

My issue with the actual pull-apart foam squishies is that once there was a torn edge I'd pick at it until the whole squishy disintegrated lol

[@maqaroon]

Yes I find that a bit too tempting as well!

[@no_idea_at_all]

@@maqaroon hehehe

[@RaHELLaable]

same lol

[@cheekycharlie24]

I wouldn’t tear it because I’m hurting them.

[@gayloser444]

same ;-;

[@Doctorskin3]

With the excess foam you could use small scissors to trim and remove material. That way you don’t disturb the curing process and material

[@lopeztreinta]

Make sure to use a good mask while using polyurethane, it’s an exothermic reaction and it does produce fumes even in a small batch.

[@maqaroon]

Thank you for the tip! The foam didn't have any smell at all (one plus point) and it didn't occur to me that there might be fumes. At least nobody has a shortage of masks now 😂

[@Madamoizillion]

​@@maqaroonYou'll need a ventilator mask rated for fumes. Regular face masks won't do anything.

[@rachelcookie321]

I don’t really get the point of tear apart squishies. You just end up with two squishies with raw exposed foam on the bottom and rough edges. And the tearing apart thing is only good for 5 seconds while you do it then end up with just two squishies.

[@remis.2020]

I don't like the idea of ripping them apart either, but I think its gimmick is supposed to be like a friendship/couple mark kinda thing. No two rips are the same, and only the one originally ripped from it fits perfectly with it. But nah I'll stick with couple jewelry, not gonna tear my precious babies apart.

[@lastbraincellsnillawafer327]

Same lol

[@madeleineklinger8045]

Is no one gonna mention the little ditto blob at 3:14 ? So cute! Loved the actual squishies as well!

[@spindlespice197]

Reminds me of flex it foam 111 that we have in US. Some tips I’ve learned is that you need a heavy amount of mold release for certain materials (like 3D printed molds). Only stir for 15 second, any more will cause errors in the cast. And what temperature the room is, is super important and will change the texture of the cast! Flex it foam comes in huge packs and is super reliable if you follow the instructions well

[@maqaroon]

Aah interesting! Thank you so much for the tips

[@natylynwassing6539]

For the ibloom squishies I would just take off one of the key chains and just have one giant squishy key chain. I couldn't live with myself if I carried around a squishy with exposed flesh. Theres no way I'm paying that much just to destroy it.

[@maqaroon]

Hahahahaha I like your way of thinking 🤣

[@gksora]

OR, okay, ORRRR. You could ad a necklace chain and have a long dangly squishy necklace!

[@natylynwassing6539]

@@gksora That would be cool too

[@Nicole_Kong]

Ihy

[@momothebug]

I think that using a real fluffy brush made for makeup would be ideal for applying colours to this. You could really blend it out like you do with eyeshadow, I think it would make colour application a lot easier.

[@fexarii]

Japan has so many interesting craft supplies, I'd honestly like to try them all. But *the shipping prices,,,* My greatest enemy

[@theonlycake]

I feel ur pain

[@benamisai-kham5892]

The base 18$ shipment is always so rough 😭

[@Tiggzie]

The ibloom thing is unsettling lol. Paying quite a bit of money just to rip it apart. What if it rips in the wrong direction 😭

[@maqaroon]

I thought it was quite foolproof but I did end up ripping the second squishy a bit lopsided. So it sucks if you bough the whole thing and accidentally ripped it wrong 🙈

[@urgae9125]

I’d just keep them the way they were because they’re cute little buddies

[@abbybabby333]

@Miaka jane Managuit ummmmm. Honestly, try it yourself on a squishy, and try to get the smoothest cut you can…. It’s literally so hard to do, I’ve done this and it’s pretty hard

[@benamisai-kham5892]

​@@abbybabby333would a wire cutter on low temp work?

[@rachelcookie321]

3:14 not the tiny Ditto made from the extra clay lol

[@maqaroon]

Haha yes! I made loads of Ditto molds with that for squishies

[@g-l-o-s-s]

Your videos give me a sense of nostalgia since I’ve been watching for years, keep it up Joanna :)

[@maqaroon]

Thank you! I still use the same music from 6 years ago and it's giving me major nostalgia as well 😂

[@annoyingcactus8862]

I used to watch you so much during my childhood!! Glad youtube recommended your channel to me, you are one of the reasons why i still love collecting cute things till this day as a grown teen haha^^

[@arianamiranda3660]

Same! I clicked on this bc it looked interesting, but their voice the channel name seems really familiar! I have no clue which videos I used to watch, but I definitely watched this channel in middle school.

[@jirachiy]

i love the little ditto you molded😭😭💕

[@maqaroon]

Yes, I made that out of some scrap clay and might create an army of squishy Dittos for a future video 🤣

[@xxmisty_rosexx3885]

@@maqaroon send them out to Ukraine 😂

[@g1ng3rsn4ps]

Professional moulder here! Easiest way to do the first type of design (with small details) is also the hardest. Need a 2-part interlocking hard resin injection mould. Would have to make keys and everything.

[@maqaroon]

Wow thank you for the insight! I'm not at all familiar with molds (aside from the small putty ones I make for squishies) so I had a feeling this one needed a very different technique

[@greenflamesfirestarter]

I don't even go here (I'm not into squishies, I'm not into making squishies, I'm vastly outside of my realm of interest, I don't even know how I got to this part of KZbin) but your videos are so cool and detailed and thorough and creative that I keep coming back.

[@nanamixinz4804]

Can you try to make molds out of the teeth retainers. The clear ones that you can buy off Amazon that becomes soft and moldable after you boil them.

[@maqaroon]

That's a great idea!

[@estherstreet4582]

That's an interesting idea, since she sometimes uses a product called oyumaru which is something very similar but designed for that purpose. It would be cool to see the differences. There's also a product called "thermal plastic pellets" which I think people use for making models?

[@brookereid4379]

i would love to see if the other hitohada gels work for the the tear apart squishies!! 🎉❤ love your channel so much btw

[@skylarashwell1357]

"You have to forcably rip the animals apart" 🤣🤣🤣🤣🤣🤣

[@avaaasimar4730]

The instant i saw you bring out the chalk pastel dust I knew that would be the winner, lots of dollcustomisers use it to blush and apply colour to different parts of dolls, some even use it for the hair to make it look softer! Definetly fits the style you were going for here, I'm happy you found it useful! The squishies are adorable, i love the little tabby cat!

[@pheonixpidgey5294]

I loved how these squishies turned out! Have you ever thought of using candle gel for squishy making?

[@maqaroon]

Aaah that's a great idea! I actually have a candle gel kit that I bought years ago and never go around to filming, and it never occurred to me that could work for squishies! Have to try it out

[@YulChannel]

It's great, the content attracts viewers

[@tiamelancholyjeoncockity]

Omg I haven’t seen this channel in years, I remember watching this in middle school and high school. I can’t believe this channel is still doing pretty well considering diy was basically a trend back in 2015-2017 and it was basically dying out since. I might get back into watching them again cuz it’s basically like therapy for me 🤭

[@elcatrinc1996]

i actually screamed when you tore them appart, its just feels painful

[@fsheee3458]

I love your videos, you’re so talented and fun to watch 🥰

[@mary-ruthflores4107]

The polymer broke because it wasn’t baked completely. The baking is actually a chemical reaction involves heat and time. It should be baked at temperature for 30 minutes for every 1/4 inch of thickness. A one inch piece needs two hours

[@hamburger7243]

If this came with some kind of paint to seal the exposed edge, I’d buy it 100%

[@misstricksmix]

Beautiful work

[@pigakitty]

the shape of the finished chick and pig squishy makes me think.. if you purposely overfilled the mould, could you make a four way tear apart squishy?

[@r.i.pmydog7723]

I don’t get the gimmick of purposely bracking the Squishy, yeah sure you end up with to Squishy than one but they both will have huge tears that frankly look ugly.

[@maqaroon]

Yeah I thought it was odd but somewhat unique since there have been all possible variations of squishies over the years. They also have a donut design (inspired by those round mochi donuts) that can be torn into many smaller pieces.

[@julio-xn2sn]

U made my imagination go to far by me imagine that HUMAN FLESH IN HITOHADA GELL THAT GAVE ME THE CREePS

[@julio-xn2sn]

I like my comment bc no one does

[@lodiberry]

The duck would probably be my favourite! Great video!

[@PikaChu...........]

The meaning behind the name is indeed very literal of Japan 😄 but they make such amazing craft supplies!

[@vixy32]

so glad to see your video pop up on my feed again :)

[@genuinedeimos]

Those blue and pink cat pull aparts in the beginning were so cute!!

[@entirelybonkers8832]

I would just never pull apart the pull apart squishies I’d feel like I was ruining them

[@LipstickL]

You have an amazing relaxing voice,you should do audio books

[@Nezuko-chan6373]

Things I love abt macaroon: 1.docent clickbait 2.is amazing at art,clay,sculptures,Squishy’s

[@youkantstopme5363]

im having a bit of acute insomnia lately and your videos help me relax so much at night, finally getting a good nights sleep for work in the morning. thank you!

[@maqaroon]

Thank you so much, glad they helped 🥰

[@Sofia-qn6fs]

I love your content so much . Thank you for making my day 😊❤️. Hope you have an amazing day !!!!

[@fairycorgi1127]

Your tutorials are so detailed and useful I’ve wanted to try making squishys and your videos are super helpful

[@bijukarnath2567]

The squishies look so cute!

[@CSCatos]

This is so cute!

[@photobombz]

I didn’t notice this was so early until I opened the comments 😳 Great video!

[@Hanjisungissigma]

Same 😳

[@quitzororo]

Same!

[@pompom2621]

I remember watching your videos when i was in middle school. You still upload such cute content this makes me happy.

[@gohyuxin5700]

Woaaa the cats is Soo cute

[@avocatto1877]

The Lil polymer ditto is cute

[@mackoboco]

Messing up on a squishy is like pez falling out of the pez dispenser. Ngl.

[@spaghetti9976]

HEOSNIQNSIOAKS OMGGG!!!! I DIDNT KNOW YOU WERE POSTING AGAIN!!!! IM SO HAPPY I REDISCOVERED YOU

[@rebeccas9715]

Hey I'm early for once. I love your videos so much. I have been watching your channel for years. You are one the first youtubers i ever started watching. Thank you for being good at what you do :)

[@maqaroon]

Thank you so much!

[@Bicth97]

I don't like how tear-apart squishies can have a ragged edge! I'm okay with tearing the conjoined twins apart tho.

[@user-bv3yy8sq3f]

maybe you could try fabric dye to colour foam like that?

[@水-p8x]

pls relpyyy love ur vids(hope u post long videos more often) love from Australia ♥♥♥

[@lorraineaguiar9080]

ur voice, oh, ur VOICE is soooooooooooooooo calming

[@magicbucket6005]

The creators: ok people we need a new product that is super hard to work with but the results are so good that people keep buying it to try again

[@haruka6844]

you could use a big hunk of clay and carve it into the shape you want then you get sharp edges and a peice that won't fall apart! also these videos are so relaxing I love them I used to make sock stuffies

[@thedemonslayer8600]

I wonder if watercolor would work for coloring these, you'd have to be more careful while it's drying, but in theory it would work

[@captain07]

i thought the koala & cat squishes were the one you bought, turns out it’s the diy one! your colouring skills is amazing!!

[@jraxreviewsxcosplayxmore6934]

Oh Japan, I love you… vibrant beautiful culture, awesome art supplies, awesome craft supplies, anime, coolest gadgets….*HUMAN SKIN GEL*

[@maqaroon]

Haha yes! And the fact it comes with a very cute mascot that looks like a liquid blob of...human flesh (??)

[@Kayleb_Gayleb]

Im early! You are one of my favorite youtubers!!

[@AVspectre]

This would be such an interesting collab with Moira Elizabeth!

[@crochetwithsamandnic9428]

Love your content and try to make DIY squishy shaped like money and make a squishy wallet thats a challenge from me good luck!

[@Kaedehara_Simp]

If I had a pull apart squishy, I would probably leave it as it is! 😅

[@KyzaRayne]

I feel like the idea of pull apart squishes is cute but there is a lot of the raw foam showing and the key chain part it to hard to squeeze

[@izzur..11]

Could you do this with memory foam and like shaping it into the shape?

[@lexi.666]

im finally early for once. I absolutely love your content, keep up the good work!

[@sterlingsilver8148]

Yo wtf I'm early. Didn't know you still uploaded! I loved you when I was younger!

[@Skdjfjfjdkfdkkfsjxk]

Good video. Keep it up:)

[@Prince-sx1pm]

But don’t you think the gel is to expensive so can you make a video trying make squishy gel or foamy gel or hitohado gel that you find on google please😊

[@maqaroon]

Yes unfortunately Hitohada Gel is very pricey so it's more of a DIY just to make for fun, or if you specifically want to make a squishy in a certain design (eg as a gift). It's probably not suited for making squishies to sell or using on a regular basis

[@combatdummy2]

"The softness of human skin or flesh" things got dark

[@snowyleaf2081]

These are so cute

[@Espurrd]

3:15 has a little ditto

[@pauladunley7727]

I absolutely loved this video do you have any merch coming out soon??😆😆🤗🤩🤩😄

[@okminabb]

OMG SO CUTE

[@stellamariss3335]

I need to eat forbidden marshmallow fluff

[@bestnezuko603]

i like your video

[@czbaterka]

I would just use Smooth on products for making foam art stuff. That kit is expensive.

[@xxmisty_rosexx3885]

True...it's also a bit easier

[@melaniejaneprocter5529]

I couldn't tear them apart 😢 I'd have to leave them as they are. very cute 😍 ❤❤XXXXX

[@Gnomeusthe3rd]

3:27 hahahaha buff cat

[@Payton_Wod3236]

Ditto in the oven❤️ He is my fav Pokemon

[@lavenderpeep8024]

Your voice is so nice!

[@dumpking_]

its ok because the cat looks like a scottish fold !!

[@Tired3120]

Finally being earlyy wooo love the vid super cute 🥰 been following for years at this point it’s entertaining always

[@pangkoulee7648]

Dude. I just want to SQUISH IT.

[@rachelmace868]

Can you please make more plushies tutorials?

[@eeveeloutionkawaiitoons7454]

Can you make a red panda mochi please

[@astagorth430]

Do any of these materials decompose?

[@shyannepritchett8576]

I wonder if you could soak the squishys in rubbing alcohol for a lighter easily blended almost watercolor effect

[@s2lLandals2]

I want a video of these Squishies in milky hitohada gel

[@bluerabbit4010]

Sooo, the video was going nice...then we talked about human flesh 😐 lol just kidding, I was super caught off guard from that 😂

[@skyeabanathie5546]

Can you make a really big mocha squighy???.!!

[@eal22108]

I saw someone put pigment in the foam mixture before putting it in the mold

[@maqaroon]

Yes that works too! Hitohada also make oil-based ink that can be added directly to the gel. Though I wanted the two squishies to be different colours so I couldn't figure out how to make it with coloured foam before curing.

[@lachauntiswashington231]

Nice

[@shadedlane11]

7:26 any Moriah Elizabeth fans here?

[@Mochi_Craftsx]

Here

[@Sofia-qn6fs]

Lots of love from Australia... Kawaii:))

[@Mixed_Activist]

Cute

[@stepanchester9608]

cute☺😉

[@Shibux]

omg im early yayy i love ur videos !!

[@gksora]

I can't tell of Moriah Elizabeth (another KZbinr here) would love those, or hate those..

[@loritaylor1602]

Is hitohada gel toxic to the airways? I have reactions to chemical smells like perfume and resin.

[@maqaroon]

I forgot to mention that in the video but it actually has no smell whatsoever! So that is one bonus point. I don't think it gave off fumes because I worked with it for ages and didn't smell or feel anything.

[@loritaylor1602]

Thanks. Is there an American version of it at somewhere like Micheals?