The Most INTENSE Paint Job You'll Ever See, even Angron gets jealous! painting Chaos Knight Rampager

This is the story of creating a CUSTOM Chaos Knight Rampager, aligned with the Blood God Khorne! This is made from the new Chaos Knight Abominant set.
The paint scheme is a custom scheme for our World Eaters theme.
Now this video has taken an extremely long time to design, build, kitbash, paint and then editing the video! To give some context, we started the planning in December 2022 to then start building in February 2023!
In this video, we will explore the use of Streaking Grime / Streaking Rust, dirty down rust deposits and a tonne of weathering effects!
This scheme can also be used for the painting of pre heresy Warhounds / World Eaters.
P.S. We are offering 4K quality on our videos! So remember to change that quality if you can!
This is one of the first videos that is offering 4K quality.
If you are looking for any of the STL's used in our videos, you can find them over on our Patreon.
00:00 Welcome to NuHue!
00:29 Introduction
01:18 Khornes Axe!
04:41 Carapace
06:38 Shoulders
07:35 Hindsight is 20-20...
08:25 Shoulders
09:52 Melee Arm
12:20 Leg Armour
13:41 Built display
14:04 Painting
21:12 Armour Painting
27:12 Weathering
37:52 The Base
43:46 The Final Act
45:52 The Tape Ending
Until we meet again! Farewell, from NuHue.
Paints used:
Red Primer
Pro Acryl:
Dark Warm Grey
Coal Black
Bold Pyrrole Red
Green
Blue
Golden Yellow
Burnt Red
Mahogany
Bright Warm Grey
Bright Ivory
Ivory
Citadel Paints:
Rhinox Hide
Eshin Grey
Blood for the Blood God
Lahmian Medium
Nihlakh Oxide
Vallejo Paints:
Field Blue
Orange Ochre
Carmine Red
Verdigris Glaze
Leather Brown
Black Brown
Blue Green
Pale Sands
Light Turquoise
Ivory
Light Rust Wash
Chipping Medium
AK Interactive:
Crusted Rust Deposits Dark Rust Deposits
Crusted Rust Deposits Light Rust Deposits
Rust Streaks - Enamel Paint
Streaking Grime - Enamel Paint.
True Metal Iron
True Metal Steel
True Metal Silver
True Metal Copper
True Metal Brass
Abteilung 502 Oil Paints:
Dark Rust ABT070
Light Flesh Tone ABT135
Turquoise Lights ABT515
Copper Oxide Blue Patina ABT180
Light Rust ABT060
Dirty Down Rusts Deposits
Patreon:
/ nuhue

[@OvergrownLeprechaun]

You are an absolute kitbash genius. Please, for the love of Khorne, keep up these amazing Khornate kitbashes

[@NuHue]

Thank you Charlie!! There are more Khorne Kitbashes coming! I also want to make an entire 30k army! Aaaaand kitbash the Angron model for 40k!

[@OvergrownLeprechaun]

@@NuHue All my khorny dreams in one place? I can't wait!!!

[@NuHue]

@@OvergrownLeprechaun My work is to make the dream work!

[@Minkieminkie]

It’s an absolute crime that you don’t have more subs! from the limited videos I’ve seen, you’re a miniature genius!

[@theycallmepiccolo9985]

I know that you dont upload that much and the algorithm hates that but its a crime against humanity that you do not have more subs

[@NuHue]

It suuuuucks that the algorithm does it, but I'll accept it, quality content doesn't come quickly and I am sure aiming to making the best warhammer content there is!

[@WinstonCorneilius]

Hopefully everything is ok. He hasn’t posted anything since June, on any of his social media

[@joshuasmith5472]

That is truely stunning work!!!!

[@tombrand236]

Sick man! This is incredible

[@setra23]

I'm always surprised by how few people slice up the legs of the Knights to repose them. It's so simple to do and makes the Knights look so much better when in a group. Awesome job on this conversion.

[@NuHue]

Thank you Deadmetal! I think it's convenient to not hack up an expensive model and also, it can be scary! I just hope someone watching these videos will see its easy and gives it a go!

[@zachsilby4569]

​@NuHue I would love to see a bodyswap between a Chaos Knight and an Imperial Knight where basically the Imperial Knight has the Chaos Knight legs and the Chaos Knight has the Imperial Knight's legs, (mostly cus I plan on that kitbash but dont wanna drop nearly 500 on 2 models, one of which I won't use.

[@budrothefox3666]

Imagine going into battle with a huge two-handed chain axe. would be devastating in close quarters!

[@masongrae5010]

You have single handedly convinced me to get a knight

[@wolfstormminatures1504]

This is a n awesome chaos knight!!, I have played chaos knights ever since they came out and this is the best chaos knight rampagerI have seen to date.

[@NuHue]

Thank you Wolfstorm! I really appreciate this comment! I hope you enjoyed the show!

[@UK-patriot-Cooper]

" 2 words cover this" ABSOLUTELY GORGEOUS! lovely lovely work mate

[@dew7972]

You may never see this, however something to help green stuff in a mold, is to take bees wax or even using beard balm or beard oil… (what I use, lol) brush a very light layer in the mold, then press the green stuff into the mold, keeping you finger tips wet, really get in there and then let it dry for like 24 hours, usually it’ll come out nice and smoothly. I also do this when making a small resin mold with green stuff or that one Japanese toy you heat up and mold around thing when using UV resin. Makes it so much easier.

[@irrelevant1630]

this is by far the best knight i have ever seen 😮‍💨😮‍💨😮‍💨

[@NuHue]

Thank you!! I hope you enjoyed the show.

[@Lorderite0]

Dude, your channel is SO underrated. Amazing work!

[@NuHue]

Thank you Lorderite! We will climb those ranks I'm sure of it!

[@kinggeedorah8953]

@@NuHue i am too, you are doing fine work not only with the kitbashing and paintjobs, the video and soundediting is top tier.

[@NuHue]

@@kinggeedorah8953 Thank you KingGeedorah! It's hard work but very satisfying.

[@David-oc5lg]

Amazing converting and painting!!! Very inspiring!!

[@tombrand236]

Literally so blown away by how good this is man. How have I only just come across this channel!???

[@nemhod]

oh yea oh yea, this is it, what an amazing knight!

[@NuHue]

Thank you MrAwesome!! I hope you enjoyed the show.

[@michaelcrowther9307]

Amazing work, you deserve 1000’s more subs!

[@br42]

Very nice! thank you for going into so much detail.

[@NuHue]

Thank you Bill! Hope you enjoyed the show.

[@KrootX]

An axe for the right arm... Armpit hairs of death for the left... Sounds reasonable to me!

[@Mex_the_Fox]

Your video and editing quality is amazing - this channel deserves waaay more views and follows!

[@techpriestessfeeb2780]

this is awesome! I had a shit ton of fun converting my night to nurgle

[@noe.hammer]

I just found your channel, love your kitbashes and the inspiring paintjobs !

[@flashymaxminecraft6930]

Would love to see some Ork kitbashes, it’s a thing that you don’t see Mitch of

[@NuHue]

I do have a Ghazghkull Thraka on my desk which is waiting for the kitbash experience!

[@ljohnsson]

INSANE conversion, SUPER nice video! Love it!

[@NuHue]

Thank you Lars! Hope you enjoyed thst show!

[@Moxiltws]

You basicaly turned a Citadel model into a Warmachine warjack! Realy amazing job on the converting and painting!

[@janemf]

This is so excellent!

[@NuHue]

Thank you Jane! I hope you enjoyed the show.

[@lark9998]

The artistry and skill is unreal , amazing channel

[@NuHue]

Thank you Lark! I'm glad you enjoy what you see!

[@jacobsweet9270]

Finally finished the whole video. Love your content and the time you put in is truly inspiring and appreciated. I really hope this channel gets the recognition it deserves

[@NuHue]

Thank you Jacob! Really appreciate this comment!

[@acledfloyd]

This is amazing!

[@NuHue]

Thank you Erik! Hope you enjoyed the show.

[@DoktoRVoLoXGuitars]

hell yeah! brilliant AF

[@NuHue]

Thank you DoktoR! Hope you enjoyed the show!

[@MrTom12345]

Great video!

[@NuHue]

Thank you Tom!

[@garrettward6059]

well done man!

[@NuHue]

Thank you Garrett! Hope you enjoyed the show!

[@Jaydonald_DG]

You are absolutely incredible! Fantastic video and amazing end result.

[@NuHue]

Thank you Jaydon! Greatly appreciate the comment. Hope you enjoyed the show.

[@richardbradley2335]

Absolutely stunning.

[@NuHue]

Thank you Richard! I hope you enjoyed the show!

[@flips300021]

Nice work. And that visual movement in the pose is perfect! 👍Oh, and thanks for the heads up on the K&S Tubes, I've just bought a couple of packs. I have various long lengths. But these very varied shorter lengths will come in very handy. Cheers! 😁

[@8BitJesus]

Glad I found your channel, the work you're putting in worth the end results! Fantastic work

[@NuHue]

I'm very glad you found us Stuart! Hope you enjoy the shows!

[@ChibsterofNurgy]

Really incredible work. Please never stop posting.

[@NuHue]

Thank you Chibi! We have alot more in the pipeline, just a shame they take so damn long!! I hope you enjoyed the show.

[@MrTpimms]

Next level stuff this is dude!

[@NuHue]

Thank you MrTpimms! Glad you are here to enjoy the show!

[@pecosbill5849]

Amazing work, my guy!

[@NuHue]

Thank you Pecos! Hope you enjoy the show

[@Drakio95]

Amazing video mate :D

[@NuHue]

Thank you Drakio! Hope you enjoyed the show!

[@fangoffenris31]

insane!!!

[@NuHue]

Thank you!! I hope you enjoyed the show!

[@tattedmedic]

Bro this sht is so unique and creative. The techniques you show are amazing and thorough- you deserve more views. Cheers.

[@NuHue]

Thank you Tattedmedic! Hope you enjoyed the show!

[@thatguy_apu]

Phenomenal video mate, you're really getting there with the top mini painting creators in terms of quality, both in regards to the mini and to the video! Looks amazing

[@NuHue]

Thank you! It means a lot to see this comment. We will keep putting the work in! One day maybe I'll be considered their peers. Hope you enjoyed the show.

[@joshuamort5525]

such an underrated channel man, the inspiration you give for ideas i just love this! thank you for getting me back into this grimdark universe !!!

[@NuHue]

Thank you Joshua! Means a lot to read such a comment. We are slowly growing, sooner or later we will be worthy! I'm glad that you found us and more so that your back into grimdark! Hope to see you around the videos more.

[@joshuamort5525]

@@NuHue 100% keep it going!

[@Cheesemuffinz99]

One of the greatest models I've ever seen, you make Khorne proud!

[@NuHue]

Thank you! Blood for the blood god.

[@JamsMiniMods]

Amazing work, man! I've been wanting to do a Nurgle Knight for so long now. This has given me even more inspiration!

[@NuHue]

Thank you jam's! I'm glad this video has given you some inspiration! I hope you enjoyed the show!

[@arachne539]

This kitbash is so cool. If I ever get another Knight for my Chaos Armies I'm definitely taking some tips from this video for conversions

[@NuHue]

Thank you Arachne! I'm glad to see you enjoyed the video!

[@Ramsie_Hartmann]

good job mate

[@NuHue]

Thank you Steffen! I hope you enjoyed the show.

[@BabaganooshXD]

Just found your channel and enjoying your content. Your Vids = Vibes

[@NuHue]

Thank you Babaganoosh! I'm glad your enjoying the vibes! I hope you enjoyed the show.

[@echlinryan]

Another masterpiece!

[@NuHue]

Thank you Echlin, the content comes slow but you can always count on gold quality!

[@jonnylectitio279]

Just found your channel. Super high quality, in depth, and great editing! Keep it up man!

[@NuHue]

Thank you Jonny! A lot of time went into the writing, design and editing. Here's to providing better content and further improvements! I hope you enjoyed the show.

[@valpcd3092]

What an excellent tutorial, your production quality is amazing for such a small channel, subbed !

[@NuHue]

Thank you Val! A lot of time and effort goes into the production which unfortunately means I cant upload as frequently! But, quality over quantity! I hope you enjoyed the show.

[@sophisticatedredneck1743]

Just barely getting into warhammer 40k painting. Been following the lore for years and decided it’s time to learn to paint and play. I would love to see a Nurgle night? I plan to build an army soon

[@Joemama-oq9of]

27:25 tinnitus jumpscare

[@tedy141]

YESSIR! Getting mogged by a mini. Didn't know it was possible, but somehow you did it. Good stuff, my guy

[@NuHue]

Thank you David!! It certainly does have a dominating presence! Who needs Angron now... Really appreciate the comment!

[@lolpwndk]

I'll gladly wait months for videos of this quality!

[@NuHue]

Thank you Mass! I really do wish I could get this content out sooner!

[@miaouew]

Wow. I don't know what else to say but that

[@g.c.4824]

looks like it came straight out of a John Blanche piece

[@apeofjustice7109]

Oh Yes! Another NuHue video!? Let's go!!!!

[@NuHue]

Ohhhhhh yes ApeOfJustice! Grab those snacks, kick back and enjoy the show!

[@WelcomeToLumbridge]

I'm really trying to watch this video but youtube is throwing ad after ad at me, thanks for the content i got to watch before i had to close it

[@TheMxVortex]

What a great knight converstion! I love it. And hate him - because mine Khorne knight will never look soooooo god as yours! Freaking amazing Dude!🎉

[@NuHue]

Thank you MxVortex! I'd love to see your Khorne Knight. Feel free to post pics to our Discord! I hope you enjoyed the show.

[@andreyzhunenko5556]

Это невероятно!!!!

[@NuHue]

Thank you Andrey! Hope you enjoyed the show!

[@Dadsgrieve2]

Great Video-Thank you! I am trying this technique as I type. The one question I have is that I am using a toothbrush to reduce the crusted dark rust deposit and it isn't actually doing anything. Do you put white spirits on the brush first?

[@jacobsweet9270]

LETS GOOOOOOOOOOO! excited for the nids content for 10th

[@NuHue]

Thank you Jacob! Ooohhhhh yes! That sweet 10th 'ed Tyranids! I already have a killer idea for them and I'm hoping to do a video making the entire Tyranids army.

[@jacobsweet9270]

@@NuHue well the wait will kill us per usual but im sure it will be worth it

[@NuHue]

@@jacobsweet9270 The wait also kills me too!

[@Lee-vp8vs]

Love your take on Khorne minis. Would love to see your take on the control room of the Conqueror, with Lotara Sarrin stood in front of her demonic form melded to the control throne.

[@NuHue]

oh wow that's a horrific image! I love it!!

[@Lee-vp8vs]

@NuHue I haven't seen you do any diorama work, but with your feel for Khornate imagery, I think you would smash it.. I think there is a battle in lore of ultramarines boarding the ship so could have a battle on the bridge, including demons slaved to the control stations?

[@Ruki1411]

damn, the model is fanstactic and i really really love your base, very creative and easy to do with normal stuff in the house the barbwire part is a bit fast, can you tell me more detail about it? I'm new to make DIY base

[@geteavnroc2250]

You should take that effect you had with the "Hindsight is 20-20" section in the video, and create a new video of you talking about bad/sad/failed relationships you've had. Also, make sure you are sporting that pink sweater, and you have the huge 80s mic in your hand to complete 'the look'. It'll be EPIC!!!

[@NuHue]

Stay tuned for the new channel "NuHue's life Views"!

[@weinstrassendrohnefpv6822]

Hi! Great work there. Do you mind sharing your STL for the shoulder pad chains? on cults or sth else? :)

[@Verocyie]

Please my good sir, MORE KNIGHTS! I'd love you to make a daemon engine knight! Maybe a daemon infused armiger to go with the one you've already made?

[@Verocyie]

Also have a subscribe, ya deserve it with your talent

[@NuHue]

Thank you Verocyie! There are plenty more Knights to come! Depending on how the landscape looks for Chaos Knights in 10th 'ed it may direct as to how these armies develop. I have to say, I was really hyped for when Vashtorr dropped and it did give me a lot of inspiration into this Knights design. But I do want to continue with that theme, with a little mix of demonic entity inside. I still have the other WarDog to build!

[@Verocyie]

@@NuHue Oh my goodness, a wardog combined with a heldrake and Vashtorr wings! That would look so fucking cool! The Wardog you already have looks like a werewolf type thing already, so continue the animal/fantasy theme!

[@NuHue]

@@Verocyie that would be super cool!!! I wonder what fantasy animal we could do next.

[@Verocyie]

@@NuHue Ooh! What about a khornate Cerberus type thing? Using the heads of three Hounds of Khorne and going heavily into melee?

[@simonjohnmarsden9129]

MY BLOOD FOR KHORNE

[@NuHue]

And skulls for the skull throne!

[@batitonio7811]

What's the intro song called? Phenomenal video and conversion, genuinely one of the best knights I've seen.

[@NuHue]

It's called lost in the dark.l by Ayio. Thank you! I really appreciate your comment! I hope you enjoyed the show.

[@synonymtoast716]

I think the Mold would work if it was in 3 parts, the design in the middle, and then the 2 sides to squish it, and then you can just poke it out. or itll stick to one of the walls and you can scrape it off

[@NuHue]

Thank you! I did try that method but because I wanted the front to have a design the greenstuff just got stuck to the other side aswell. Even with a release agent it barely did anything! It certainly is an idea I want to refine because it will save so much time on future kitbashes. Maybe I go further and split the 2 sides in half so what ever is in them can be accessed just that bit easier.

[@DrekavacScream]

Awesome build! Have you tried using a cordless drill to twist the wire for the barbed wire instead of doing it by hand?

[@NuHue]

Thank you! I did try first, unfortunately the drill was inconsistent, twisting by hand was the only reliable way.

[@bruhlee700]

your channel is so underrated. would you kitbash a daemon prince of tzeentch?

[@NuHue]

Thank you BruhLee! We are slowly getting there, just need to spread the word more! Oh absolutely!! We will see what we can conjure up!

[@lukemclouth9530]

Oh man, can you upload those shoulder pad chains? Those are great! Really want them for my Iron Warriors themed knight!

[@NuHue]

Thank you! The files are up on our Patreon

[@lukemclouth9530]

@@NuHue awesome! Thanks! As in like downloadable if you subscribe? I only see 1 video of this rampager up there so far. Is the file in the video or something?

[@NuHue]

@@lukemclouth9530You should see the post on our Patreon page. The files are with the Chaos Knight Rampager. You'll need to subscribe to view the post.

[@lukemclouth9530]

@@NuHue alright perfect, that’s what I thought, but I wanted to make sure. Looks like you got yourself a new subscriber.

[@yunanada2264]

Your video is amazing, I think you did a really amazing job painting that imperial knight. It could have been perfect in my opinion if you held back and didn't add those osl effect with the different lights and power packs of the knight or at least toned them down but it's your art piece and you do what you want with it. You made me want to finish painting my imperial knights army and start a chaos knight army.

[@NuHue]

Thank you Timothé, yeah I did want to go for a more "over the top" effect, just to add some more colour into the grim style. I do enjoy mixing the two worlds together. The world of grim dark and the world of punchy colours! Incredibly happy that this has made you want to do a Chaos Knight army! I would love to see your works on our Discord sometime! I hope you enjoyed the show.

[@NewSocialNetwork]

27k views? wtf this was one of the most relaxing videos i ever watched an im not into painting :)

[@NuHue]

Slowly but surely it will rise! Well I'm extremely happy you found our video, and even more so to see you found it relaxing! I hope you stay for future videos. I hope you enjoyed the show!

[@greatdragonanimations8477]

i wonder what a chaos wraithknight would look like?

[@Illyclone]

7:50 Did you use Vaseline or Lube on the mold? It seems like a great idea that I want to explore. And having info always helps. Great video btw, really enjoying this.

[@NuHue]

Yeah I did use vaseline on the mold, you can see at 0:59 a quick snippet of me doing so. It "kind of work" but the issue was the greenstuff was just still too tacky and sticky... I did also try other mold releases and the issue was the same. I need to come up with a better idea of the mold before I try this again! Also, thank you!! I do hope you enjoy the show.

[@Illyclone]

@@NuHue I really did. Watching your backlog now. Thank you for the info.

[@andrewspence5892]

How can I get a hold of a couple of those waist extenders?

[@bok1569]

Bro,What is the specification of the plastic card you used, is it the same specification if you use this method on War Dog

[@NuHue]

Hey Bok, the plastic card specs are as follows: White Plasticard matt/glass Solid Polystyrene HIPS. The sizes that I have to use are: 0.75mm 1.00mm 2.00mm Now depending on which area you want to use the plastic card, would indicate which thickness you would need, but I find that these 3 thicknesses are perfect for everything!

[@AlphariusXX426]

Is this technically grim dark?😮

[@NuHue]

That depends, everyone is entitled to what their view of what grimdark is. For me, it's dirty, gritty, doom and gloom but yet vibrant with colour! This is just my interpretation of an artistic view on grimdark.

[@madsurfr728]

Did you have to pin the feet/legs?

[@ikitclaw3299]

look bill making stuff moved out of the attic :)

[@NuHue]

Onwards and upwards!

[@ikitclaw3299]

@@NuHue bill and you are really cool, no offense intended, I love your content

[@NuHue]

@@ikitclaw3299 none taken! I do hope you enjoyed the show! There's plenty more to come.

[@FreshCoatKustoms]

Regarding your GreenStuff mold: Do you have a minute to talk about our Lord and Saviour WD-40?

[@xxbabaxx12]

ngl every thing was so grounded, relaatively realistic approach with the weathering, but the green osl is just too overbearing. very out of place imo

[@doggo9567]

I've always wanted a straight cqc knight but not having a big shooter on my giant walker feels wrong

[@NuHue]

It does feel weird, but having a big axe helps!!

[@doggo9567]

@@NuHue hell yeah brother

[@roryhatfield6696]

Freaking amazing!!! I love your work and I’m attempting to emulate it

[@NuHue]

Thank you Rory! I'd love to see your work on our Discord some day!