The New Tamiya TT-02B Plasma Edge II, Gun Metal Edition

[@thelkline7079]

If anyone deserves this, you do. It's great that your channel is getting more exposure - thoroughly deserved.

[@TAMIYALegends]

Thanks for the lovely comment my friend 😊😊😊

[@alastairmulholland4346]

pre cut and painted body,life would be a lot easier if tamiya did this with all their cars.

[@mrdoofa9357]

Great video Glenn, this really is well deserved as nobody else can match your enthusiasm and knowledge of vintage Tamiya. So glad your channel is getting more recognition and once again we’ll deserved my friend.

[@AB-80X]

I have a lot of TTO2B experience. Run the MS often - I like it. I know GPM parts are so-so at best, but they have ONE thing that make sense. Get their metal diff gears, because the TTO2B gears are notorious for stripping. They sometimes last maybe 2 packs and that's it. Get the ball raced steering linkage too, there's too much slop in the stock system. That's the two best upgrades aside from bearings. The rest can be changed as it wears out. But steering linkage with bearings and full metal diff gears are a must for a well running TTO2B as it will kill the dif gears in short order.

[@TAMIYALegends]

ABOlsen80X Excellent information thanks buddy 😊👊🏻

[@AB-80X]

@@TAMIYALegends You're welcome my friend.

[@thecretanbull4784]

Good morning Glen!!! Just goes to show you how people feel about you and the channel!! Good karma comes back to you buddy and you deserve it! Again....the best channel!! Thanks

[@TAMIYALegends]

Thanks so much Chris 🤩👊🏻

[@cgeyye9916]

I couldn’t agree more! 😃👍

[@leehurst6922]

Me too awesome channel

[@RCKickschannel]

Well done Glenn, that's epic! Nice to see you getting some sponsorship to help support the channel. People don't really understand the costs involved with running an RC channel so every little helps.

[@TAMIYALegends]

I got a couple of comments below who weren’t happy I was getting free stuff 🤪👊🏻 Ffs 🤷🏼‍♂️🤷🏼‍♂️🤷🏼‍♂️

[@RCKickschannel]

TAMIYA Legends Well it’s not free, you have to make videos and spend hours sitting on a computer editing. You also had to do this week in and week out to build a KZbin channel. I can think of a million easier ways to get that RC car than that.

[@timothycollier1265]

Glenn, don't worry about the noise! We love a good unboxing and that's part of the excitement! Again, thank for that I have been staring at one of those for a while now... Love the channel!!!!!!!

[@TAMIYALegends]

Thanks Timothy 🤩👊🏻

[@RCHobbyShed]

That's awesome! Good on EuroRC. Looking forward to the build/ run! 👍

[@TAMIYALegends]

Thanks Mick 🤩👊🏻

[@wadebeaumont7570]

Nice one Euro RC! I’ll have to check them out. Looking forward to this build and seeing how she moves.

[@TAMIYALegends]

Thanks Wade 😎 Yes me too should be an interesting little series of videos to come 😊👊🏻

[@GTMatukka]

Way to go Euro RC! A very kind move from you guys! 😊

[@TAMIYALegends]

Couldn’t agree more 🤩🤩🤩

[@monkeywrench0265]

Stoked for you mate! Awesome

[@TAMIYALegends]

Thank you 😊 😊😊

[@craiggarrett26]

Great video Glenn EuroRc are a great company that I've used several times. I'm so glad that they reached out to you. You so deserve it. I'm looking forward to seeing the build and run videos.

[@TAMIYALegends]

Thanks Craig 🤩 I’ll be showcasing your superb paint jobs on Sundays video 🤩🤩🤩

[@craiggarrett26]

@@TAMIYALegends Cool 😎. Thank you.

[@wesleydonnelly2141]

Glenn i'm super happy for you getting sponsorship. You deserve it my friend! Great channel and inspiring hundreds, maybe even thousands of us to re-ignite our passion for RC'ing!

[@TAMIYALegends]

wesley donnelly Thanks Wes 😊😊😊

[@richie161075]

Hi Glenn. Great Unboxing video by the way! I received my Plasma Edge II Gun Metal Edition last week, and built it over the weekend. Coming from a Schumacher angle, this was my first Tamiya purchase, and chose this model mainly due to the pre-painted, pre-cut bodyshell & wing. Plus, loved the colour and it’s ultra-cool look! Found the build to be an absolute pleasure, with no real issues. Went for bearings, driveshaft & motor mount upgrades, plus a 13.5T Brushless Sensored motor & decent servo. AND LiPo!! 🤔 It looks so nice now it’s built, that I don’t really want to run it yet, and am still undecided whether to fit the Decals. So, it’s currently sitting & looking proud on my mantelpiece at the moment... Keep up your awesome videos - I really enjoy watching them! 👍😎

[@TAMIYALegends]

Richard Shelley Thanks Richard 🤩 Yeah I’m looking forward to building it on Friday hopefully😊 Thanks for watching and commenting my friend 👊🏻

[@andrewmagro7703]

i had to laugh when i saw the title as i ordered one of these babies three weeks ago with the bearing kit and just finnishing off the hotshot and the frog so my bench is clear then im going to build this cant wait to be honest was a toss up between the cr01 and this for next build but theres around 5 or 6 others in the back room waiting to be built also so im a buggy guy so this beast got the next build and yes i got the exact same one the gunmetal version that way the paint and the wing and body have already been done and those beautiful spikes on these awesome green/yellow rims just take this to the next level , will have to get me a second one to drive on the track as this is going to be yet another test drive and then shelf queen as all my other tamiya's , way to go ERC, you rock , cheers glen for giving me the Tamiya bug all over again when i see it on yours i generally source one from wherever i can and 9 times out of 10 i get it , cheers budd.

[@TAMIYALegends]

Excellent comment my friend 🤩🤩🤩

[@darrengrimmer8541]

Great to see you get some recognition Glen from Euro Rc. Love the idea of building it straight out of the box... that’s just how we did back in the day!!!. It took me years to start understanding hop ups and I never did it.. So really looking forward to seeing out it turns out👍👍👍👍

[@TAMIYALegends]

Sweet thanks Darren 😊 Yeah I’m definitely going 100% stock and we’ll get it on the track to see how she goes 😎👊🏻

[@paulrobinson9355]

This is fantastic! Great partnership, fantastic video and super dope buggy - can't wait to see the build and running videos! #awesome

[@TAMIYALegends]

Thanks Paul 😎👊🏻

[@Houleigan]

Cool kit! That Gun Metal is cool, looking forward to the build and running! Thanks to EuroRC for the kit!

[@TAMIYALegends]

Thanks my friend 😎👊🏻

[@willsrc1222]

So awesome, man! Super happy for you. Those colors are going to look sweet once the car is together. Look forward to the build vid!

[@TAMIYALegends]

Will’s RC Thanks for watching my friend 😊👊🏻

[@nickpeat]

Nice one mate, great to see EuroRC behind you too. Will make some great content. Cant wait to see how it performs on the track.

[@TAMIYALegends]

Nick Peat Thank Nick 😊👊🏻

[@adrianharrison5208]

That is amazing mate, I hope EuroRC do more with you

[@TAMIYALegends]

Me too 🤞🏻🤞🏻🤞🏻

[@jamesvozar1]

Well wishes as always Glenn and good vibes mate. Thanks for everything buddy. j.

[@TAMIYALegends]

Thanks James 🤩👊🏻

[@jtothepmusic]

Another excellent video on a buggy I have but I'm yet to build! Keep it up Glen

[@TAMIYALegends]

Thanks for watching my friend 😊👊🏻

[@1114mat]

Your good buddy, you take tamiya to a different level. Good to see that other company are reaching out to you, to do builds for them, you must be chuffed. I don’t think you realise how good you are at building and explaining what you are doing plus hop ups, well done 👊🏻👊🏻🤩

[@TAMIYALegends]

Thanks Matty 😊👊🏻

[@1114mat]

TAMIYA Legends your welcome buddy, have to have a look in to that buggy

[@mikestockley1435]

Just in the process of building one of these myself. Looking forward to seeing it completed to see what hop ups to go for. Love the channel!

[@TAMIYALegends]

Excellent thanks for watching Mike 🤩👊🏻

[@outbackrcaustralia4895]

That's going to look awesome! Looking forward to seeing how it runs! Good on ya Euro RC 👌🍻🦘🇦🇺

[@TAMIYALegends]

Thank you 😊😊😊

[@JuusoHuttunenOfficial]

Awesome, I've been interested in this car. Can't wait to see how it runs!

[@TAMIYALegends]

Excellent I’ll get the build video up soon my friend 🤩👊🏻

[@billcox87]

congrats on the partnership man, that's great;) That's funny ,i've had my eye on this kit for a few weeks now, been building my Tamiya collection for a year now and love these "cheap" kits, i'm more of a crawler guys but find myself driving my Tamiya's more and more often than i ever thought, absolutely love 'em!!

[@TAMIYALegends]

Excellent Bill, I must try a crawler soon myself 🤔 Thanks for watching buddy 👊🏻

[@rcmindset2876]

Congrats. I happy to see you go down this route. Hopefully you try to reach out to other companies and sell yourself to them as a great communicator of RC info. You have a great channel that many companies should be promoting their products on!

[@TAMIYALegends]

Thanks buddy 😊👊🏻

[@aviano72]

Cool, finally a TT-02 Glen I love how u say Gun :) If u need any advice just ask as i got 13 TT-02's, in all forms but only 1 B version, all hopped up

[@TAMIYALegends]

Wow 13 😳😳😳😳😳😳😳

[@gundamboy195]

I've built my plasma edge 2 from spare and love it. That a sprue is worth gold btw lol.

[@TAMIYALegends]

Excellent 😊 Thanks for watching buddy 👊🏻

[@ianat5016]

Takes me back to 80s Me with my lancia 037 my mate with his frog Bog standard no hop ups 380 motors Stickers straight on to body Ready to go Love the videos keep them coming 👍👍

[@TAMIYALegends]

Cars Man Thanks for watching buddy 😊👊🏻

[@philmoffett366]

Very interesting buggy! Get it built and let's have a look👍

[@TAMIYALegends]

Coming soon Phil 😊👊🏻

[@chrispontet]

The best upgrade fro a TT-02B (IMHO) beyond ball races is stiffer suspension towers. The supplied plastic ones are too flexible and don't let the suspension work correctly. It transformed my Plasma Edge II. It's a really good buggy though out of the box and got me back into RC cars after a 30 year hiatus :)

[@TAMIYALegends]

Excellent thanks for the heads up Chris 😊👊🏻

[@mad-beerc3818]

Hey that shell is nice Glenn can't wait to see it finished and on that track!

[@TAMIYALegends]

Thanks buddy 😊😊😊

[@stuartthorn3995]

Nice one Glenn, Euro RC really did you a solid. Get her built and give her Hell lol

[@TAMIYALegends]

Thanks buddy 🤩👊🏻

[@Bennie98]

I have a neo scorcher metallic blue. I love to ride it. I had it stock for a while, but the prop shaft kept rubbing on my servo. So I changed the entire drive chain. And while I was at it I changed the plastic bearings to ballbearings. It soooo smooth now when you hold it in the air. I also installed a motor cooling fin, metallic motor mount and a bigger spurgear. It didn't do much speedwise. But it's nice to know it's there. :D

[@TAMIYALegends]

Excellent feedback my friend, thank you 😎👊🏻

[@Trucktech80]

Nice, looking forward to seeing that on the track, I think that's gonna be my next kit once there back in stock in the states.

[@TAMIYALegends]

Sweet I’m building it on Friday and hopefully get it on the track the week after 😎🚗💨💨💨

[@KaizerTest]

I got mt TT02B Dual Ridge up to 52Mph or 83Kph with stock gears and tires. Just put a 5900kv motor in it and ran it on 3s. Got my Top force up to 71Mph or 113Kph yesterday...lol. 😂 As for the TT02B when I ran it on 3s offroad the rear end pinio/bevel gear(the one at the end of the driveshaft inside the rear gear housing) broke teeth off within a minute. The glass filled nylon gears are brittle compared to say my Boomerang stock drivetrain which handles 3s fine offroad. So I put steel diff gears and ring and bevel gears as well as steel spur and motor pinion. It's bulletproof now. Congrats on the sponsor by the way! 👍😀

[@TAMIYALegends]

Excellent feedback buddy, thank you 😊 👊🏻

[@Leonsrchobbys]

wow fantastic bit of kit Glenn mate very cool👊😎🇬🇧🤟😊👍

[@TAMIYALegends]

Cheers Leon 😎👊🏻

[@danbrown1819]

I have recently bought a plasma edge 2 gunmetal grey and love it, it takes a lot of abuse even with every thing being plastic. I’ll be definitely keeping an eye on this build 😜

[@TAMIYALegends]

dan brown Excellent Dan, thanks for letting me know 😎👊🏻

[@BenAppleTre]

Hi Glenn, been rocking a Metallic Blue Neo Scorcher for a couple of years. At first I ran it stock with bearings but now have upgrades as follows... Aluminium prop shaft, end shafts, alu motor mount, high speed gear set 68T Spur, full turnbuckles, carbon shock towers front and rear (rear broke so replaced with FRP), metal out drives & dogbones, aluminium rear hubs all parts are Tamiya. And the biggest Bling upgrade are the DF03 Aluminium Dampers!!! Boom 🔥👍😎🔥 Most of these upgrades just improve efficiency of the drive train and adjustability and TBH the shocks are lovely blue bling but not really required 😂👍😎 Got a HobbyWing Max 10 4000kv combo and it’s proper mental, bit too quick and might drop back down to the Black Sport Tuned had in at the start... 👍😎

[@TAMIYALegends]

Wow that sounds a pretty epic car my friend 🤩👊🏻

[@arnoldapplewhite3149]

Well chuffed for you mate, a sponsor, nice! Does this mean no more talk of winding the channel down? :)

[@TAMIYALegends]

Thanks buddy, I’m now committed to running until the end of the year, then I’ll see where I am with it all 😊👊🏻

[@peterrenaud9639]

Great to hear!👍

[@RCvapor]

The most noticeable upgrade on my tto2b was the steering, also upgraded bearings, and to brushless, great vid as always 👍

[@TAMIYALegends]

Excellent thanks for the feedback my friend 😎👊🏻

[@paulcodd7277]

Great timing, just started one of these as well 👍

[@TAMIYALegends]

Excellent 🤩 You going standard kit or doing upgrades?

[@paulcodd7277]

@@TAMIYALegends all standard except ball raced, not had the torque tuned motor before so keen to see how it goes.....but no doubt I'll want some hop ups in the future

[@leemollison7508]

Hi Glenn, good to see Tamiya Legends getting some recognition! Good Stuff! I'll be interested to see what the diff journals look like when you pull it apart after running with plain bearings. The diff bearings are metal, so in theory should wear nicely against the fibre reinforced plastic of the diffs, but on the two TT-02B's I've built i was too scared to try it and put 12x8 ball bearings in from the start........ If you ever decide to put silly power in it, the all metal DF-02 differentials and pinions can be swapped in, the only modification needed is to file the collar on the back of the pinion down a bit until it fits, I cant remember the exact length needed but its a pretty straightforwards mod.

[@TAMIYALegends]

Lee Mollison Excellent thanks for the feedback Lee 😊👊🏻

[@pcaunceuk]

I was tied between this and the DF-02. I bought the DF-02.... I might need to add this TT02 to the collection too... 👍

[@TAMIYALegends]

Excellent I need to do the opposite lol 😂 Thanks for watching buddy 👊🏻

[@bradkalman2353]

So far that's my favorite color and for that particular vehicle.

[@TAMIYALegends]

Excellent 😎👊🏻

[@DustyFingersRC]

I have been considered this and and the exact same Hop Ups so looking forward to this.

[@TAMIYALegends]

Sweet 😎 Thanks as always for watching my friend 😊👊🏻

[@Ratty_Rex]

Looking forward to the build and running videos. :) Bookmarked their website for future "investments" ;)

[@TAMIYALegends]

Ratty_Rex Excellent thanks for watching my friend 😊👊🏻

[@jasondionne1214]

Hello from Oregon. I really appreciate and enjoy all your hard work. I do however blame you for my recently finished TT02 Acura NSX, as well as the M05 Miata on my workbench 😂 Cheers

[@TAMIYALegends]

Excellent 🤩🤩🤩 Thanks for watching my friend 👊🏻

[@leehurst6922]

Glenn. Nice one bud. These are awesome cars. Handle fast brushless if you upgrade the diffs to df02 spec. The only real downside are the shock towers. Especially the rear, it is so bendy that it prevents the shocks from working

[@TAMIYALegends]

Thanks Lee 😎👊🏻

[@rickkings2071]

I just got one of these for about $120 such a low price. My first 4WD so it was cool to see your video lol

[@gazr4967]

My next build. Great vid as ever.

[@TAMIYALegends]

Excellent 🤩 Thanks for watching buddy 👊🏻

[@GTMatukka]

Finally! I've been thinking to get this ..too 😁

[@TAMIYALegends]

Excellent my friend 🤩👊🏻

[@butchmeister80]

Fancy getting this for my first buggy build

[@cgeyye9916]

Great new video! 😃👍 Thanks!

[@TAMIYALegends]

Thanks buddy 😎👊🏻

[@AqueousShunt]

Looks awesome!

[@TAMIYALegends]

Thanks for watching Vince 🤩👊🏻

[@Jos-wu1id]

Nice, Glenn 👏. Two points that I don't like with the tt02b ( I don't speak about plastic bushings ...) : the shock towers are really soft and bend easily (the hop up is necessary) ; the ground clearance is really really small for a buggy

[@TAMIYALegends]

Excellent feedback thank you 😊

[@caulpope]

Please keep one completely standard and then get another to ‘hop-up’. I’d love to see them side by side! It’s hard to appreciate the improvements might (or might not) make but having 2 cars being bashed together could really show the improvements. Cheers 🍻

[@TAMIYALegends]

Yeah that would be really cool to do 😊👊🏻

[@petewads8125]

Awesome mate, some more great things to come then?

[@TAMIYALegends]

Oh yes plenty of content to see yet my friend 😎👊🏻

[@turb48]

Got same one. With speed passion 10.5 motor.high speed gear kit. metal steering rack .fastrax shocks .Ali shock towers .ballraced .hobbywing esc 10bl 120 .Ali prop and cups. adjustable camber links. Ali motor mount. run it on 8.4v nimh it rips. It’s not far off my hpi wr8 on 2s depending on which gearing I use as I’ve tried it on 64 66 and 68 spur with various pinions. Jump well aswell tried it with 3s for a laugh it ripped a glued road tire away from the wheel. 🤣 found it best all round running 68 spur with the biggest pinion it would take using that spur can rember which size it is. Great starter buggy 👍🏻

[@TAMIYALegends]

turb48 Excellent that sounds awesome my friend 🤩 Thanks for watching and commenting buddy 👊🏻

[@alanmorris8783]

Looks great and thanks to EuroRC. I wonder if the shocks are oil or friction? If friction,then they have to go to make it work at all off road. I’m sure you must be neck-deep in low-end oil shocks you could slip in.

[@TAMIYALegends]

I took it for granted they were oil, but you’ve got me thinking now lol 🤔

[@rcmindset2876]

I just bought the FF-03 civic it is on sale for about half off on Tamiya USA and free shipping.

[@TAMIYALegends]

Excellent that’s a chassis I’ve never had. Enjoy it my friend 😊👊🏻

[@tamiyafrog3220]

Nice kit😎😎 great video.

[@TAMIYALegends]

Thanks buddy 😊👊🏻

[@Parksy1987]

IV got a tt02b neo scorcher, ground clearance can be an issue but otherwise it's pretty good fun round the field (providing the grass isn't too long) seems pretty durable too. There are people that don't like the tt02 but I think that's more from a racing point of view. Was the first chassis I ever bought and built and enjoyed the build and good fun to bash about with.

[@TAMIYALegends]

Excellent 🤩 Thanks for watching and commenting my friend 👊🏻

[@shadow7037932]

Hey mate, could you do a comparison between the TT02B vs DT03/DT02 vs DB01 chassis?

[@TAMIYALegends]

Yeah that sounds like some cool videos to make 😊👊🏻

[@shadow7037932]

@@TAMIYALegends that'll be swell. Just got a Terra Scorcher 2020 re re and I think I'll pick up a few more Tamiya kits. Most of the Tamiya buggies are just so nice looking compared to the Arrma/Traxxas/TLR stuff.

[@davidturner2365]

Looks well cool 👍👍

[@TAMIYALegends]

Thanks David yeah it’s not a bad looking thing at all 😊👊🏻

[@GearWorksRc]

Are you still doing more of this as well.

[@jhessieboy]

Dont forget to add the steering arms and bridge on the upgrade list. My tt02b had a mind of its own before i upgraded those

[@TAMIYALegends]

Excellent information thank you 🤩👊🏻

[@nickrobertson2450]

My PE2 is rather well used! Its very tough. The spoiler is vulenerable though. I found it a little slow/dull in standard set up though. Obviously bearings are a must but a speed passion 8.5T & hobbywing 120A esc & 2s lipo & 19t pinion livened it up substantially! The plastic drive shafts, cups & axles can be replaced by the metal ones listed in the TT02B MS manual its not listed in as a hop up but it works out way cheaper than the universals hop up. For jumps the shocks are better with the clear 900 damper oil from the DF03 spring bag. Now if you don't like the plastic diff gears then the metal gears & diff case from a DF02 (Gravel Hound) will fit with a minor fileing of a millimeter off the bevel gear. & as you mentioned the turn buckles are essential to. So I'd say 900 oil, MS driveshafts & turnbuckles are the way to go. 😀

[@TAMIYALegends]

Excellent feedback my friend, thanks buddy 🤩👊🏻

[@craigwatkinson6329]

Currently running one of these, just general bashing. They are very basic out of the box but like you said have a massive range of hop ups. The ones I noticed that made the biggest difference were the Aluminum steering set (not cheap) and the high speed spur gear set. Aluminum prop shaft looks bling and obviously reduces twisting. Would be great to see you gradually improve this kit and hop ups are widely available. 👍

[@TAMIYALegends]

Excellent thanks for watching and commenting Craig 🤩👊🏻

[@RCACTIONAUSTRALIA]

Nice Kit 😎 I would Definitely build it with bearings.

[@TAMIYALegends]

Yeah I think that’s the point, that’s what I always do 🤷🏼‍♂️. Think it might be kinda cool to go standard kit, then make a few upgrades to see the differences 🤓👊🏻

[@RCACTIONAUSTRALIA]

TAMIYA Legends Nice. Definitely will be a nice kit either way. I had the TT02B Neo Scorcher built it Stock & it was definitely a nicer runner with bearings & Gear Ratio changes

[@rcmindset2876]

There is a TT-02 has a truck also. I watched another channel build it recently.

[@TAMIYALegends]

Yeah there’s three different Tamiya trucks now 🤩👊🏻

[@dragonheart5316]

Been taking a peak at this kit, curious to see how it goes for you.

[@TAMIYALegends]

Excellent I’ll be cracking on with it soon my friend 🤩🚗💨💨💨

[@skagerstrom]

EuroRC partnerd with Gavin to right? They're a good company! And from our neighbour Finland!

[@rixsta911]

I’ll have to link you to my £700 TT-02B gunmetal build when it’s done. Great buggy 👍

[@SpeccyMan]

Having watched the entire series of videos for that build I had been wondering what the final cost was with all the extras. I'm not going for full bling with my build, just the essential hop-ups since I don't have £700 to spare. 🤣

[@ericwood2790]

I looked at this one but not a big fan of the tt-02 , so this build will be interesting for me . Maybe you’ll change my mind and I’ll get one .

[@TAMIYALegends]

Ok Eric that sounds like a challenge my friend 🤪👊🏻

[@bradkalman2353]

Put ball bearings in at the torque tuned motors in over overheating it may futurecare box if you do not use ball bearings.

[@snappy1669]

I have the flouro wheels off a Plasma Edge on a Top Force Evo shelfer, really surprised by how good it looks, you are fully aware the Evo wheels are made of unobtainium

[@TAMIYALegends]

Excellent I’ve actually got them lined up for my Egress to match the new shell I have painted 🤩 I’m thinking it’s going to look pretty trick 😎👊🏻 Thanks for watching buddy 👊🏻

[@matbell1514]

Love it Glen! Got your hands on the TC-01 yet?

[@threejean2011]

Looks nice, too bad you can't buy it anywhere. I've got a regular Edge on backorder and I doubt I'll see it before the end of the year.

[@TAMIYALegends]

Yeah the shipping system is so hit and miss right now, really frustrating 😞 Thanks for watching buddy 👊🏻

[@patricksadler3587]

Hopefully this means that you’ll be doing your videos still keep up the good work buddy

[@TAMIYALegends]

Thanks Patrick I’m definitely here now for the rest of the year 😊👊🏻

[@patricksadler3587]

That’s great news mate 👍

[@thisisarobbery5056]

Hi glenn . tries 13turn motor, high speed gear set , after market shock, beefy tire . bearing is the most important thing. She will run like a stadium truck .

[@TAMIYALegends]

Excellent feedback thank you 😊

[@io3204]

Hello, would a Neo Scorcher body fit on a df01 chassis? Thank you

[@TAMIYALegends]

i ö I really don’t know I’ve never seen it done 🤔🤷🏼‍♂️

[@io3204]

@@TAMIYALegends thx anyways. Maybe someone knows.

[@mergatroid1212]

I would like to know what you think of the neo scorcher....any good?

[@Mark_5150]

I'm interested to see how this goes, it might be a fun car to pick up considering how cheap it is.

[@TAMIYALegends]

Yeah I’m intrigued to she how she goes myself Mark 🤩🚗💨💨

[@alastairmulholland4346]

pre painted body,would make life a lot easier if tamiya did this with all their cars.

[@TAMIYALegends]

Alastair Mulholland Tamiya are definitely moving towards that buddy 👊🏻

[@peterrenaud9639]

still wanna go to the track with my b74? Are you available to go to the barnyard RC track on aug22? The next practice day after is sept12. I can drive or meet you there.👍 It's less than an hour from Woodstock

[@camrowdrone6497]

Like this , my TT-02 is road only get stuck on anything

[@TAMIYALegends]

Yeah I’m looking forward to seeing how this chassis does as an off roader 🤔🤷🏼‍♂️ Thanks for watching my friend 👊🏻

[@juliusdream2683]

Hey was wondering what Tamiya cars can compete with the Kyosho ultima or RC10 and 4wd turbo optima. Tamiya has buggy’s that can compete and possible win on the track. Does Tamiya I meant to say have anything to compete I’m really a Tamiya guy d like the RC10 as it’s the only American team associated. 👍🏻👍🏻👍🏻👍🏻👍🏻

[@macleancustoms8590]

Paint might save you some work but wait until you start the decals!

[@TAMIYALegends]

Yeah I was having a good look at them last night! Should be fun 🤪 Thanks for watching buddy 👊🏻

[@thecretanbull4784]

Sorry buddy but that’s also a gravel hound body correct? Thanks

[@TAMIYALegends]

Yes I believe it is Chris, you know Tamiya are famous for doing stuff like that 🤪👊🏻

[@vigilante351]

This day and age, ALL kits from entry to pro - should come with bearings and oil shocks. The extra $25-$45 to put them in would not break the bank for the kit to be properly completed from Tamiya.

[@TAMIYALegends]

Totally agree 😊👊🏻

[@AB-80X]

45 bucks is not a viable thing to do in a car that sometimes retail for 90 bucks. But they should include them, for an additional cost of 10 bucks. The Tamiya bearings are not the best and fairly cheap. Glenn you can probably ball race this for 10 quid with bearings from RC bearings.co.uk. Do it,

[@rnichol22]

This could have been the latest hotshot

[@TAMIYALegends]

Yeah definitely not in the same league as the Hotshot 🤩👊🏻

[@mitymike]

Honestly I don't like it but this looks like one for the unbuilt collection 😉

[@TAMIYALegends]

mitymike 1996 Lol 😂 yeah makes sense 😊👊🏻

[@afrog2666]

Oooooh, SHINY! :)

[@kaksikymmenta3]

Halko is Finnish for log as in piece of wood.

[@TAMIYALegends]

Ok thanks for letting me know 😊👊🏻

[@diaspo]

Glen, add in front of www.eurorc.com to make it a link. Also, pop your Patreon link in all your video descriptions. You'll get a tonne more traffic that way. Love the content mate!

[@rworden96]

So you’re staying ?!

[@TAMIYALegends]

I’m here until the end of the year now, my personal situation has changed again 😅

[@rworden96]

That’s good to hear. Hopefully will change even further for the better. Your videos are great! Especially for us that are going through our own hardships.

[@1114mat]

Hi Glenn

[@TAMIYALegends]

Hey buddy 😊👊🏻