The ONE Factory - FORD MODIFICATION EVERY Powerstroke OWNER NEEDS [WATCH THIS!!!]

Modifications to Ford Powerstrokes, DRW, SRW, adding the FACTORY rear running light. ****WE NOW HAVE A WIRING PIN KIT AVAILABLE FOR YOU TO ADD YOUR LIGHT IN LIKE PTT DID. EMAIL HIM AT THE ADDRESS BELOW FOR INFO! New harness here LIMITLESSAUTOWORKSLLC.COM***Hope everyone is well, thanks so much for coming back and tunin' in with us. This was one of the first things I did to my rig. You all know how I love lights. I though this was a factory looking, factory install by a factory trained tech, DOESN"T GET ANY BETTER THAN THAT!! LIKE - COMMENT- SUB - SHARE
Music: ------------------------------
Relax by Peyruis / peyruis
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/2RkwcNw
Music promoted by Audio Library • Relax - Peyruis (No Co...
------------------------------
To send a small donation to help my channel grow & to also to contact me, please visit my Paypal at my email [e-mail]
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.

[@gregorysoderlund8025]

It's not Friday... This is a real treat getting a vid on a day that isn't Friday 😁😍🇺🇲

[@markfranecki861]

Ordered my truck 2/22/22 received 9/22/22. Just wrapped up installing the Dually rear running lights I purchased from Limitless Autoworks. So easy and looks great. Keep the videos coming.

[@PowerStrokeTechTalkwARod]

He has A LOT of stuff for these trucks. Great dude, dude 👌

[@pig9r]

Did this today with the Limitless harness. Took about 20 minutes. Happy with the results. Thanks!

[@markmcaleer1376]

Nice job! Glad to see someone taking pride in his work! This just might be the first up grade to my new King Ranch when it gets here. After the weather tec floor liners and no drill mud flaps.

[@PowerStrokeTechTalkwARod]

Read the description....WE HAVE A NEW HARNESS🙋‍♂️

[@valhansen7260]

@@PowerStrokeTechTalkwARod do you happen to have a part number or a proper description for the pins for the plug? I'm looking to connect the led marker lights on my sled deck into this circuit but not where to source the connector pins.

[@PowerStrokeTechTalkwARod]

Did you read the description? ...

[@johnnyyarbrough9716]

Installed my DRL light using the limitless wiring harness . Worked great . Easy install. Thanks for the recommendation Arod .

[@PowerStrokeTechTalkwARod]

🫡🫡🫡

[@ridingwiththereids]

I love watching your electrical videos. Cleanest installs every time. Looks bad ass my man.

[@PowerStrokeTechTalkwARod]

Thanks guy!!!!

[@johnstaines9133]

Really well done video. Just completed this mod today. I am not much of a mechanic but these videos make it all possible. I did the constant on reverse lights at the same time from limitless Autoworks! Keep the super duty content coming!

[@PowerStrokeTechTalkwARod]

Friggggggin awesomeee

[@questamerica9873]

You are so smooth when you work. That's what I like about you.

[@PowerStrokeTechTalkwARod]

🙏🙏

[@brantcross2152]

Used your video as a general guide to help me fix a bend pin on my 2018 F250 platinum tow mirror. Paint shop bent the pin when reinstalling the mirror. Great video and tutorial!

[@bigrig4630]

They look awesome. I have always loved the three lights under tailgate on trucks, it just looks awesome

[@edhdougherty]

That looks awesome. I gotta check the Snappy Ford catalog tomorrow to see if I can figure out the OE bumper harness number for those who can’t do wiring.

[@jeremyzahn6257]

Did this project today to my 2022 SD. Thank you for the detailed video and to limitless Autoworks for the wire harness. Worked perfectly!

[@PowerStrokeTechTalkwARod]

Friggin awesome. #1 top mod that you all do!!!

[@hughtruex]

Love it! At my local ford, I find all kinds of wires and crap hanging after they do work. Premium cost, sub standard work.

[@PowerStrokeTechTalkwARod]

Sorry pal 😔😔

[@donsvideos1985]

Yep, same with a local dealer service shop here. Just one example that is not abnormal for them. I took my truck to them for the block heater recall. They had it all day. called and I had to Uber to pick it up. OK, no biggy. I drove it to my local motorcycle dealer after "window shoppin" and when I walked out I see this wire harness and connector hanging near my drivers wheel nearly touching the ground. I investigate and see they had replaced the block heater harness but one frame clip on the old harness was a bridge too far so they left the effing thing and didn't bother to fully secure the new cable. I am sure they tucked it in somewhere where they thought it would be ok but it wasn't. I know this was not "immediately dangerous to life and health" but I hit a level of pissed off that was way up the chart! I am a tech in a different industry and can tell you this is not OK. If you don't pay attention to the small stuff I have ZERO confidence in your ability to take care of the big stuff!

[@PowerStrokeTechTalkwARod]

Its all in FULL QUALITY ALL THE TIME, EVEN WHEN NO ONES LOOKING

[@Mikeduncan73]

Installed this set up tonight on my f350 swd ! Thank you for making this great instructional video 👍🏻👍🏻👍🏻

[@PowerStrokeTechTalkwARod]

Awesome pal, have done so many. You guys are really liking the mod I did!

[@mike_adams]

Well done!! Looks factory ... oh ... because it is! ... 🤓 From Tasca Parts Marker Lamp Assembly - Ford (HC3Z-13A613-C) $107 Wire Assembly Ford (WPT-1314-) $19 Awaiting info from ARod on the pin connector part number

[@PowerStrokeTechTalkwARod]

👍👍👍👍👌👌👌👌👌

[@PowerStrokeTechTalkwARod]

I will give an update

[@ajaj1964]

Waiting for part # for pin connector too

[@PowerStrokeTechTalkwARod]

I dont hava a way to look up the pin numbers. Ford doesnt sell them like that. If u need some u can purchase them through me

[@ajaj1964]

PowerStroke Tech Talk w/ARod How can i get pin connectors ?

[@brianskinner4328]

Very clean and very factory looking. Will not even void warranty since it's not modified(hacked)

[@mike-md]

Nothing like the satisfaction of doing it right!! Especially on your own brand spanking new 2020 Ford F 350 SRW 6.7 Powerstroke!!! Looks GREAT!! 👍

[@PowerStrokeTechTalkwARod]

Hell yeah!!!👊🙌💯🔥

[@2023TMc]

Nice job! Keep it factory less trouble down the road 👍🏻

[@frankvillescas9384]

Your the Man Bro you make even more Prouder to be a Ford Owner!!

[@PowerStrokeTechTalkwARod]

Thanks broski!!!!!!!

[@Pnoquio]

amazing.. you saved my day .. Ford light, limitless wires and your video make me a big favor.. thank you..

[@macd3394]

Got it done and it looks and worked out sweet with a little help from my friends. The harness looks original and easy to do. Thanks Double A.

[@PowerStrokeTechTalkwARod]

I got chu!!!!!!

[@Uncle_Fester24]

This is tight! Need to add it to my want list for 2023!

[@TheCOM]

Looks awesome. Love how you made it look factory.

[@BarnStangz]

Cleanest electrical work ever mane. I wish more people / techs did this kind of work. Thanks for sharing!

[@PowerStrokeTechTalkwARod]

Hey buddy you should call me this week will catch up

[@BarnStangz]

@@PowerStrokeTechTalkwARod Sounds good bud!!!

[@legmar]

I did this yesterday. Awesome!! Thanks for the detailed video!!!!

[@legmar]

Pro tip! I found that a 5/64 flathead screwdriver 🪛 is perfect for popping the white cap out of the factory plug. It felt much safer and easier than using a pick. Though I did use a pick to punch the whole out for pin 18.

[@videtosk]

Done! That was too easy thanks to Limitless wire harness and A-Rods how to video.

[@PowerStrokeTechTalkwARod]

New video about to drop with his new harness

[@dzw4826]

Awesome Job! I'll be following this as soon as my factory order arrives!

[@PowerStrokeTechTalkwARod]

Read the description to order

[@gwingrider07]

I have a 2019 F450 and I didn’t even know that light was there, I had to go out and look.. Sure enough there it is! Thanks Arod your videos are entertaining and informative.👍👍👍

[@PowerStrokeTechTalkwARod]

Lmaooo love it!!

[@freethinkingamerican80]

That's slick! Great job dude.

[@pnwtundra07]

Clean very nice i love me some lights should see my cab guard lights all over the thing

[@charlesvernon7213]

Nice work! I love lights too. I cheated and got the wiring harness from Limitless! Very nice harness well made and quick delivery too. I will be installing this week. Thanks for the detailed pin and connector info!

[@PowerStrokeTechTalkwARod]

Im so glad he re did our idea

[@charlesvernon7213]

He has this vid on the instructions too.

[@user-ys4ic5zs8q]

That was a great video and I like you, love lights!! I learned something today and thank you. My question is; the splicing connectors that you used on the ground wire, where can I get some of those? (Part number) and by the way, the connectors on the wires that your buddy hooked you up with, Harley has been using those for years. I use those when having to extend wire harnesses for aftermarket ape hangers,etc… Looking forward to hearing back from you and thank you again. “Light’em up!”

[@PowerStrokeTechTalkwARod]

Watch our latest video. Limitlessautoworksllc.com is wha you need

[@69borue]

I have a 2019 F250 XLT without the auxiliary 12v power to the trailer hookup pin. The fuse box doesn’t even have the fuse terminal’s factory installed. What are my options. I’d love to see a video on this issue. Two different dealers have no idea about this question. It’s so annoying when my dump trailer won’t stay charged going down the road. I’m having to charge the dump trailer battery after two dumps because of not recharging when towing. Thanks for all the great videos

[@PowerStrokeTechTalkwARod]

Thanks. Did you follow the owners manual for energizing the 12 charge

[@donsvideos1985]

You wounger guys are going to live longer than me but I have never been able to get used to wearing those gloves all the time! I wear them some but can't get them off fast enough!

[@PowerStrokeTechTalkwARod]

I dont get paid enuff to ruin my hands...

[@beozzie690]

Lol... lights.. definitely had me laughing man.. thought you’d be doing the block off egg plates and def deletes.. anyhow good video.

[@PowerStrokeTechTalkwARod]

Psssssshhhhhh boi thats trouble son, cmon

[@dglasgow0]

Quality job that any engineer would approve of.

[@PowerStrokeTechTalkwARod]

Woo woo

[@devildocozo5096]

Bro what tha hell …. Seriously …. Now I gots to go follow suit!! Good job keep em coming …. I gotta do some mods like you OE mentality about wiring …. Gonna do bed lights …. And tool box “RKI” inside light and front “Rigid” light bar on grill & “Rigid” front fog lights & rear “Rigid” light bar and spot lights basically oil field setup. Keep up good work don’t know if you have done any of these mods but appreciate it be safe be blessed

[@devildocozo5096]

Dang bro up early and putting in work RESPECT I am up cause sleep schedule got screwed up on a Drilling job on King Ranch in Texas SMH

[@PowerStrokeTechTalkwARod]

All day every day! Better get you our pre fabbed' kit @ limitlessautoworksllc.com.....then hit me back up so we can get you one of our kill switches!!

[@6582rg]

Looks perfect, just like my 21 dually.

[@PowerStrokeTechTalkwARod]

Yuuuup

[@dciscoo]

Glad someone finally made this vid! awesome job

[@PowerStrokeTechTalkwARod]

Thanks bud!

[@jtgtrekker]

Thanks for the vid. BTW, orientate means to position something to face the east. The word you should be using here is "orient". Not trying to be a grammar police...just sharing knowledge. Sometimes I think I've learned as much from people correcting me online as I did in school. Never too old to learn.

[@PowerStrokeTechTalkwARod]

Sorry pal jst slang

[@kzim808]

Looks sick! Congrats on your much deserved truck!

[@PowerStrokeTechTalkwARod]

Thanks Kevin!!🙌

[@Whitewinds2]

Very nice work. I am a big fan of the led lights myself.

[@michaeldegrote9782]

That looks sick. Very nice and clean.

[@jerryknorr679]

Very nice work light looks good . nice work ARod thanks

[@mark_Hershey]

I alway just tap the driver side license plate light. You can reach up over the hitch and pop it out without any trouble, just dont get your arm stuck popping it out!

[@PowerStrokeTechTalkwARod]

Nah

[@brettandreas3466]

Great video and a good how to as well, just installed mine following your instructions. Thanks

[@PowerStrokeTechTalkwARod]

Thanks buddy!!!

[@brettandreas3466]

Yes sir, I’ve learned so much since finding your channel please keep up the great work.

[@PowerStrokeTechTalkwARod]

💯😉

[@mannynm69]

That looks awesome buddy! I like it.

[@PowerStrokeTechTalkwARod]

🙏🙏

[@cledussnow3935]

I was wondering about that for a while ( since I bought mine ) was thinking about doing it with the Recon light. But think I will wait & just add more Amber lights to the enclosed trailer I’m buying next month.

[@JustinLaNoue]

Awesome job, pet peeve is when someone wires those to their taillights and they start blinking when they signal lol

[@PowerStrokeTechTalkwARod]

Omg i knw right

[@davestewart9146]

I always try and make things look oem too, awesome video my friend

[@cmcavoy100]

NIce professional install and demo Thanks!

[@PowerStrokeTechTalkwARod]

🤝👊💯

[@paulrodrigues9603]

LOL I thought that I was the only crazy one to think that. I did it to an older F250. Lowe's had the same light (Grote) as on the DRW. It matched the light that Ford was using at the time. All the holes lined up and everything. Being the hack that I was I connected it to the plate light. Oops!!

[@PowerStrokeTechTalkwARod]

Hahahahahahha

[@DS-TRUCKS]

Pretty badass!

[@akbychoice]

Syringe with a little silicone to seal up the new wire. Keep that corrosion out.

[@PowerStrokeTechTalkwARod]

Connected for life

[@bobcuomo5122]

Great job looking O.E.M. !!!

[@AceBoy2099]

I'd rather an opt7 5-way (stop, tail, sequential turn, and reverse functions) bar like I put on my f150 bed trailer, I have one to put on my dually but I have yet to do it (kinda don't want to loose the separated lights for a solid bar) but depending on possible solutions I may just forgo them for the bar.

[@daddydiesel5889]

I tried to do this with my 2020 F350 tremor when I first got it back in December, there were no part numbers available then for the light. Now I see this nice video and think sweet! My local dealers here in NW Ohio now tell me no availability on the light (national back order) wtf man I want that light lol. Great video. Ha maybe I should call your parts department?

[@PowerStrokeTechTalkwARod]

Maybe you should!!!!

[@daddydiesel5889]

PowerStroke Tech Talk w/ARod what’s the number?

[@PowerStrokeTechTalkwARod]

Email me

[@daddydiesel5889]

Sometimes I just come back here to remember…

[@PowerStrokeTechTalkwARod]

Love u daddy

[@sandman6298]

Job well done my friend,,,Got Lights 🇺🇸

[@tctwg1]

Is it Friday all ready 🤯🤯🤯🤯. Thanks for the upload

[@PowerStrokeTechTalkwARod]

2x a week pal

[@lukeswagerman5059]

Nice job! It looks great 👍

[@thegrimreaper819]

FNA BOY !

[@freedom_father]

Super clean boyyy!

[@PowerStrokeTechTalkwARod]

🙌🙌🙌

[@8fifteenoff-road142]

Great informative video. Very clean wiring.

[@PowerStrokeTechTalkwARod]

💯👊

[@Aad2797]

Yaaaaa boy! Looks clean

[@dangerranger862]

I did the same lights on my 19 but wired them into the trailer wires

[@PowerStrokeTechTalkwARod]

Cheater

[@jimmillman]

Very nice, I did this to my 2011 F-350 SRW. My 2017 F-250 and now my 2021 F-350 Tremor. I can't believe it's not an option like the LED Roof Marker/Clearance Lamps from the Factory. This time I used Limitless Autoworks LLC DRW Running Light Harness & HC3Z-13A613-C Ford OEM LAMP Glad I watched this to figure out pin # 18 Power & Pin # 1 Ground in Female Connector 13A409 Thanks for the Motorcraft Electrical Grease XG-12 tip I wonder what the part number is for the Christmas Tree Clips? I LIKE LIGHTS...

[@PowerStrokeTechTalkwARod]

Yea we developed a harness

[@jimmillman]

No Christmas Tree Clips in the kit... Sorry, I fester on little details...

[@PowerStrokeTechTalkwARod]

They're not Ford clips...out sourced & outta stock

[@jimmillman]

I'm sure I'll come across something that works... I LIKE CLIPS...

[@ryanhall386]

Great video , just did this to my 2022 F350 tremor platinum and I love it . Want to order the mirror spot harness and do that next .

[@PowerStrokeTechTalkwARod]

Yeah baby

[@ryanhall386]

Ordered the S&S disaster prevention kit for the CP4.2 and just waiting till I have time and hopefully you have time if you would want to install it for me . Loved your attention to detail in your video where you installed the S&S kit on a customers truck .

[@PowerStrokeTechTalkwARod]

Sure will pal! Email us

[@jasonlaws9624]

Nice job, although I would have liked to have seen some dielectric grease in that crimp connector. It's been my experience no matter how hard you try moisture will get in there. Also something to note there seems to be no weather seal on that connector. My 2018 had some funny issues with the airbag light popping on etc. Turns out that plug was full of water and corrosion. I also installed the marker light as you did, but I used a T connector behind the factory 7-way plug that was meant to add a gooseneck plug in the bed. So I was able to pull ground and power without cutting any factory wires. Been working great so far the last couple years.

[@PowerStrokeTechTalkwARod]

The crimp connector heat shrink has glue in it. I have a harness avail now so theres NO cutting & MOST certainly not using t-tap splice. All those trailer circuits are all monitored. Surprise you haven't had an issue....

[@jasonlaws9624]

I agree no t-taps. This is a male and female factory connector not a scotch lock type thing. Haven't had any issues popping up on the dash from the circuits being monitored. Does it use the brake connection to realize a trailer is connected or not? Thankfully it's easily reversed if ever there was a problem.

[@PowerStrokeTechTalkwARod]

Like for lighting outage. I ve had a hand fulla customers who have tapped into those & for what ever reason the TRM did not like resistances or something and would continuously pop up...trailer wiring faulty..see dealer...trailer connected/disconnected when no trailer...weird shizzz

[@jasonlaws9624]

I will keep my fingers crossed then. My last truck was an 05 and the 18 is certainly more finicky. I added an Isspro mechanical air gauge for my onboard air system and gave up any hope of easily making it work with the factory dash lights and just gave it key on power for the light instead.

[@PowerStrokeTechTalkwARod]

Worddddd

[@coolyundo]

Damn dude where do you work. I've worked in dealers for years. Not too many around like you.

[@PowerStrokeTechTalkwARod]

DEEETROIT PLAYER!!!!

[@Yeayeajjj]

Nice work

[@jimdandy7772]

Nice !! Very informative

[@michaelmason7591]

Looks shhhwwweeet. Great job as always my man.

[@PowerStrokeTechTalkwARod]

Thx

[@AngelSilverFourtySeven]

Great job, nice and clean 👌🏽 subscribed 👍🏼🇺🇸

[@PowerStrokeTechTalkwARod]

Keep it locked!😉

[@aldotamez3140]

Awesomeness…

[@PowerStrokeTechTalkwARod]

Have gotten a lot of peeps hooked up with this install!👍

[@aldotamez3140]

@@PowerStrokeTechTalkwARod I bet, and it looks like a factory installation. Very well done 👍🏽

[@acb2210]

Excellent! Great job

[@carlosandrade7439]

Freaking clean! I will be doing mine just like yours.. once I figure out what connector pins I need. Subbed and liked!

[@PowerStrokeTechTalkwARod]

Wiring harness needed is here [e-mail] newly revised....cleaner than i did it in the beginning. Hope ur excited!!!!💯💯💯💯

[@CruiserMB]

@@PowerStrokeTechTalkwARod What is the new wiring harness ? Does it replace having to connect the two pins needed? If so then I don't buy the wiring harness that you showed in the video right? Where do I get the new wiring harness and where would I find those "christmas tree" harness holders ? Thanks, I want to do this mod another! Also I truly appreciate your attention to detail, I've always been one to take the time to do it right the first time, do it, walk away, and never have to worry that it won't work. Rare breed for sure !

[@PowerStrokeTechTalkwARod]

[e-mail]

[@johndiaz5363]

You are supposed to leave the plastic on the light to keep the light looking new as long as possible.

[@PowerStrokeTechTalkwARod]

😭😭😭😭😭😭👊👌

[@videtosk]

Another great video, “presheate” your work. Do you have a video showing a good OE looking install of running board step lights? I’m thinking about installing marine grade LED strip lights but wanted to see how you would wire it into the factory harness. I’ve seen other videos that aren’t quite up to par. BTW, I don’t even have my 2022 F-350 Platinum yet, it’s on order. Just thinking about all the things I’m going to do to it when I do finally get it.

[@nikostathopoulos4371]

I have a quick question my 2018 f350 supercab has had a weird thing where the passenger door doesn't lock or unlock and it happens at random times what could that be

[@PowerStrokeTechTalkwARod]

Actuator?? 🤷‍♂️ havent had that 1 yet. Come see me lets figure it out

[@adrianspeeder]

Wire nuts to an extension cord to the front parking light.

[@PowerStrokeTechTalkwARod]

Done.

[@marcbrown8834]

What is black connection above from white connections for wire hardness?

[@adammiddleton4037]

Jesus that was alot of work but a clean install

[@PowerStrokeTechTalkwARod]

If read the description we have a way better harness now available

[@KendrasEdge757]

Damn Aaron these adds are killing me bra!! Go from no adds within your vids to FIVE adds 🤦‍♂️ Craziness mayun! Ain’t like I’m goin anywhere or anything 😂 but it’s tempting when the add showing some jackass in front of a Porsche asking me if I want to make passive income 😂

[@PowerStrokeTechTalkwARod]

No way i didnt know they puttem like that...sry pal

[@KendrasEdge757]

PowerStroke Tech Talk w/ARod I mean who tha fawk DOESN’T want to make passive income?!!? Yeah I know it ain’t, but it just shows you’re blowin up son! When you can write off a truck that’s the price of a house you know ya made it! And no I’m not hatin! I think you should get the wifey one and write that shit off! It’s your second job now! 😂

[@PowerStrokeTechTalkwARod]

😭😭🙏🙏🙏 it totally is! Puttin in the midnight oil!

[@akbychoice]

Mine 450 came with it. 😉

[@BigBoyToyzz]

Darn. I have a 2020 F250 Tremor but with the 7.3 gas. Wish I could do this but I guess you need a Power Stroke? Lol.

[@PowerStrokeTechTalkwARod]

Hell no.... Being a diesel makes no difference it makes you cooler though

[@josefellipone8934]

Thank u

[@TheRealSlowhand]

What's going on ARod... Been out for a couple weeks... Great video...

[@PowerStrokeTechTalkwARod]

Thanks pal hope you're well

[@skynet2115]

That was nice thanks. Do directions on the lights tell you which one is the hot. I noticed the knot on the hot side.

[@PowerStrokeTechTalkwARod]

No it doesnt thats why i did that so u all could tell the difference

[@RickSwartwood]

Done - Great Video!

[@PowerStrokeTechTalkwARod]

His new harness kit he re did is off the hook!

[@ForeverandEverWoods]

@@PowerStrokeTechTalkwARod yes ! I got that and this was a ten minute job.

[@PowerStrokeTechTalkwARod]

Now thats whats up!

[@sf5355]

I have some questions about my power stroke I'm a new diesel owner and need to get some pointers before o take it to a shop so I don't get totally bamboozled can you help me out

[@PowerStrokeTechTalkwARod]

[e-mail]

[@wintersfarm1340]

Cool!

[@jerryknorr679]

U should put some side running led lights

[@PowerStrokeTechTalkwARod]

Naw not meee

[@loganeley2342]

Hmm do you think the wiring is the same on an 04? It's only 16 years apart I don't see why it wouldn't be the same. Nice video Arod, it really does look factory. Thanks for bringing us along

[@PowerStrokeTechTalkwARod]

No they arent the same but they do have a way to do it tho. Thanks for comin along today!!

[@khoiktran]

I want those lights on my truck

[@PowerStrokeTechTalkwARod]

Lets do it!!

[@rt0110]

I would of grounded behind the light on the mounting stud, now you have to worry about your ground working loose over time.

[@PowerStrokeTechTalkwARod]

My shiz dont come apart player.....& you should know this mannnnnnn!!!!

[@rt0110]

@@PowerStrokeTechTalkwARod but the dual wires coming out that glue may not spread and fully seal the connection and your in Northern states where salt is used, and being near the hitch thats a high spray area!

[@PowerStrokeTechTalkwARod]

Shoooot it'll be good😉👌🙌🤝🤝

[@RickSwartwood]

Where do you get the "Christmas Tree Clips" with the hoop to go around the tubing? ...Or are they "Zip-Ties" connected to the Christmas Trees?

[@PowerStrokeTechTalkwARod]

Found em online from summitt

[@dieselhead323]

Got it done but I'm getting a BLIS/Cross traffic fault which also shut down my power controls to windows, radio, and heat/air conditioning. I'm guessing one of the connectors slipped out but will try again tomorrow when it warms up. Any other ideas as to what might cause that issue?

[@PowerStrokeTechTalkwARod]

Nope. You messed somethin up🤷‍♂️

[@alexshikin5093]

how do you feel about xl fuel tank replacements. like s&b 68 gallon

[@PowerStrokeTechTalkwARod]

Ive done a few titans!!

[@alexshikin5093]

I'm considering having you do mine 🤔

[@PowerStrokeTechTalkwARod]

Lets do it, i got extra pins!!!!

[@skyb5937]

Like that on my 2017 f150

[@PowerStrokeTechTalkwARod]

Nope not the f150s