The ONLY Headlight Tail light Tint I'll Ever Use! BEWARE Of Fakes

Material used: amzn.to/2M03uyN
More training: www.vinylwraptraining.com
My Favorite tools and accessories I use at my shop:
Heat Gun (Instant heat, no waiting) - amzn.to/3WWHmNC
3 Pack Squeegees (soft, medium, hard) - amzn.to/450sOP2
Wrap Gloves - amzn.to/4aDRAWt
Knife (Have not found anything better) - amzn.to/3KghNj8
Hex Garage Lights (perfect temp for detailing and wrapping) - amzn.to/3wPlut1
Rolling Bench Stool - amzn.to/3UZO1Ej
Tool Cart - amzn.to/44X3nxT
Scratch-safe Ladder - amzn.to/4aDaAEn
Headlight Tint (I put that %^#-$ on everything) - amzn.to/4bYoMZB
Knifeless Tape - amzn.to/3Vg46XK
Wrap Sticks - amzn.to/3wZK1eM
Magnets - amzn.to/44X3cCF
What makes it unique?
- Dry install not wet. Much easier to install and user friendly.
- Can wrap bulbous and difficult shapes that would be impossible to wrap with traditional tint.
- All other tint films I've used have a brownish effect, Vvivid's is a true grey color ( light and dark smoke )
- Adhesive is repositionable.
- No need to use solution etc... and wait for edges to dry to seal a finished project
Cons
-Because it has air-release it does have a slight orange peel to the film, it does not look like perfect glass from 12 inches away.
Instagram @ckwraps

[@mrhustler415]

Thanks Tom Brady

[@adamcain4603]

he sounds and looks like him

[@thomassteele1728]

Somehow tom brady makes millions and I'd say tom Brady is more humble than this guy.

[@DizzyGoat44]

Voice is similar looks nothing like him though

[@iluv2truck2001]

😂🤣😂🤣😂

[@3030hp]

ROFL

[@Alang_492]

3:57 i can’t be the only one who heart the Pixar theme

[@TwentyTwoThirtyThree]

Hahahaha, glad you pointed that out

[@nathanwhittaker8717]

😂😂😂

[@denim8]

facts

[@michaelschiller2540]

Brother Tintman...you’re videos rock. Some folks are just gifted in certain ways and you’ve got a gift for teaching and mad skills for wrapping!! I started with little knowledge on wrapping and tinting. I got hooked...love the stuff although it can be aggravating and difficult at times for sure. Your videos are the best and a tremendous help. Thanks...keep them coming!!

[@oHITMAN14o]

I did this to my 15 ram all the real lights and mirror lights in 2 hours by learning all this stuff from you! Love your videos man

[@808kea808]

I appreciate your videos. You’re jam packed with a lot of info and very detailed. If I ever do decide to get certified to wrap or take a wrap class, I will be sure to use yours. Even though you’re in Canada and there’s a lot of available classes in the u.s, I wouldn’t feel right using it because I’ve started with you

[@ApocryphalSaint]

honestly the best tinting vid on youtube right now. trust me...ive watched like 50 of them

[@PreludeDude]

I just did my tail lights and fogs with this material and tape technique. Overall it's really nice to work with, takes a little getting used to the thick material, I ruined the first piece with some permanent fingering from overstretching slightly. Good gloss, good scratch healing, good light transfer.. I did light smoke.

[@csmers3743]

Awesome vid!!! I will use this for my tailght wrap..Smoke is 👍🏽.. 9 minutes from application to tape peel .. Master Class

[@SilentBobber91]

Man, after only watching a handful of videos I can already tell you're one of the best in the game when it comes to KZbin content. Not to mention your skills. Very detailed and informative. And you obviously have a great amount of experience and passion for what you do. Wish there was someone like you around my area. I gotta travel at least 50 miles just to get some decent quality work that I'm sure is still about 50% of the quality you do. Keep up the great work bro love watching the vids! 🤘

[@flibbertigibbet6200]

Just done this with same stuff on Mazda 6 and looks good. Took lights out in the end as mad it easier for us and also a lot better with 2 people. The key is to get the heat and stretch into it. Thanks for the video

[@icesecurity]

Hi Chris , Happy Monday , I'm here as usual for my wrapping class :) John from Harwinton Connecticut USA

[@chillvibes_6872]

bro thank you for the tutorial and thank you for the link on where we can buy it! you’re amazing brotha

[@dt1productions918]

Can’t wait to try. I’m gonna use the hex light film and cut around for my reverse lights to be as clear as possible. Keep up the great work. 💪💯

[@captainredmanz]

I'd love to see you tackle some 2008-2010 Scion xB taillights. Nothing flat about them

[@chargerfan2]

Love your channel. Getting ready to do my tail lights and re-wrap the hood on my Camaro SS 1LE this weekend. I've hopefully learned a lot by watching your videos.

[@vyraz]

Thank you! Your video is probably the only one who shows how to get around curvy tail lamps... Tried it again (coz I kept getting wrinkles at the top of the rear light) and the wrinkles are not as bad... Im gonna try again soon.. Hope I can get it perfect the next time..

[@siulilomay628]

Thanks mate, I bought the same tint and installed today and they looks good. I think I have nearly the easiest tail light to tint and still took me a good 30 mins per side while the Subaru is super hard for me and you did it in 10 mins. I am embarrassed. Thanks for your video.

[@Messorem6]

I did a set of 2018 f150 tail lights with those complex channels this weekend. Very impressed with the film.

[@81quiroz]

I truly appreciate your videos it is teaching me a lot and I am planing to start my own side hustle

[@TheRsbas]

So I watched your vids and did my tail lights. It was amazingly easy after watching your vid and the air release tint was great.

[@Donnythelatemodeltech]

You got mad skills, love watching a Master at work.

[@mike.khar.]

The Late Model Tech. He is far from a master. Just a little above average when it comes to this stuff

[@Larbioca]

@@mike.khar. hater

[@coldchikn]

Just used the video and wrapped the taillights of my 22 Impreza. Would never have made it around those tight turns without this video.

[@Ali-fk7cn]

Big like, I've watched lots of tutorials for this job, non of them explains it like you did, thanx a lot, greetings form Iraq

[@bigfatbongizzy]

Thank you so much for this video. Super helpful and informative I was able to install the vivid smoke vinyl on the taillights and signal lights of my jeep. thank you

[@BartAssink]

Nice little showcard! And finaly a KZbinr with a body mic. Great audio quality.

[@danielconnor1458]

Top work ....now considering DIY method...was gonna pay for this....excellent vid man

[@billyp333]

Great video......thanks I will tinting headlights and taillights on my 03 Ford Expedition as soon as the vinyl shows up...........I use my 03 truck as my vinyl wrap practice mule.........lol

[@dakotalayinlow]

nice job, as always. I like that gold/yellow wrap in the background.

[@GoneDeathMode]

Thats just a taxicab thats just had a fresh wash.

[@glennb3150]

Thanks much! Great job 👍 gives me the confidence to try it myself.

[@Jimmy_Jamz]

Best tutorial video ever. Ordered the same tail light tint used your tape trick around lights. BOOM success. Wasn’t perfect on my first go around. But super happy with the process. Thanks!!

[@gozentomoe82]

I just purchased my first roll of Vivvid dark smoke lense tint to do my girlfriend' mustang. I was going to start doing headlight tints, black out roof wraps, carbon fiber hood wraps ect to get into it myself. Video is exactly what I needed to see today!! Thank you!!!

[@thomasjohannesen1003]

I'm honestly amazed by how awesome this looks and how easy it looks! I had the absolute worst experience on my first and second attempts at tinting my taillights because I was using bad stuff and I had no clue what I was doing. I was about to give up and take it to a shop until I saw your video. I'm definitely going to be trying this!

[@onewayozz7807]

How’d it go?

[@ryandesormeaux5]

Did you ever do it?

[@staggeredhorizons3657]

Love all your videos man!!! I'm going to some vinyl wrapping classes next week with Justin Pate and I'm super excited!! your videos are so great, keep up the amazing work! maybe we could get together sometime!

[@Vic_714]

yup. been looking at all his videos. makes it look easy lol. but very professional.

[@sinuemedina2550]

I just did this today to my 2018 silverado 1500. First time wraping and it came out exelent no bubbles, no creases perfect. The only thing i messed up it was because i did the light in my room,, bad idea i thoughtbit would be easier like that but no no no.. Thanks for the video!!!

[@cre8tivegarage157]

Thanks for bringing us yet another vibe 🥂 enjoyed

[@ctersigni]

Great vid! Awesome amount of help!! Thank you!

[@albertwesker7924]

Nice job mate. I can't wait tint my taillights.

[@derickponce-sanchez772]

Damn, I'm learning a lot of technique from you.

[@rp-stripsrigo426]

You are the man , thank You CK , I learning a lot , thank you teacher.

[@markalcoseba916]

@ckwraps been watching this video probably more than 10 times.. looking forward to install these tints on the tail lights of my car...

[@chucka187]

Top notch install as usual. 👊🏻

[@CD-lw6fl]

Great video demo Christian... would love to try it out. 👍

[@oldprophet]

Very Informative Video, I Definitely Will Have Fun Doing This On My Truck, Thank You So Much.

[@dsarquez]

Always awesome, got my Impreza done... Not such a good vinyl but it did the job. Thanks and Congrats.

[@63foti]

Got a precut kit from lamin-x for my 2013 911, removed the taillights, took me 2 minutes, no cutting, taping, heating or trimming. Looks perfect and it cost $38.

[@Rubie_the_Black_Widow_Subie]

@@63foti I can buy a roll of 4D wrap (5’x5’ roll) for $25 versus $38 for one time use.

[@DavidLopez-gv8mo]

NOICE. I just bought that same wrap for my Audi. Trying to black it out more

[@dave-rf2vn]

Hey looks great .going to wrap my 2015 ford edge sport very easy to.pull my rear tail lights will.pull them off and wrap them I used vivid carbon fibre to wrap piano console inside was easy keep up great work thanks

[@hygrometer]

I am about to do yellow on my 2017 Tacoma headlights, and fogs, and they are not very flat, def the most bulbous headlight housing on the 4Runner and Taco. thinking there will be a lot of fingering, but this video was super helpful with starting at flat spots and just heat and working it as you go. Thanks man if it comes out nice ill give credit here

[@ssoffshore5111]

Good video, thanks for posting this... makes me want to do my black z06 now!

[@ronjlwhite8058]

Good god that looks good!!! The entire car does.

[@erickempis4126]

Love the dark red candy look

[@hckeynut15]

Wrapped my 1995 honda accord windshield with opaque black. Looks SWEET!!! Can't see anything but, still.... looks sweet!!!

[@brad_neal]

Dude, you're really good. I have a 2018 BMW 540. It has some pretty aggressive geometric shapes to the tail lights. I was ready to use the spray-tint until I watched some of your videos. Just placed and order for the film. Wish me luck!

[@grady.stu.8300]

I bought R-vinyl tail light film. Haven't installed yet. Going to soon. Excellent video man. Really, well done.

[@jonathanedwards2983]

You make it look easy. I may order some tint and try it!

[@infamoussteven]

Thanks for all the great videos! Is it possible for you to do a video on vinyl wrapping letter/number emblems in the near future?

[@blaked.6058]

I have a 2015 sti and your videos have helped a ton. Thanks so much for sharing your knowledge, and going into such depth. You're the man and I'm gladly subscribed!

[@Clint_L]

Thanks Christian great work!!

[@davidsonbil8509]

That's what you call passionate about something cool dude

[@robbieallen4966]

Just ordered some of the light smoke tint thanks to this video, I saw the old one you did on the bmw a while ago but this one made me pull the trigger.

[@babydzcreationz510]

Robbie Allen where can we order some at. Please send me link. Thanks!

[@robbieallen4966]

Baby D510 directly from Vvivids website, it’s listed under headlight tint.

[@power-nutrition6253]

APA air release light film is also excellent.. great vid

[@zooropa8297]

Your videos are very informative! Keep up the great work! 👍🏻

[@johnmichealsburnett8888]

Lov it... Great job bro 👍👍 looks Awesome!

[@GoneDeathMode]

Ive literally just tinted my taillights for the first time using these Vvivid wraps and this tutorial helped a bunch. It was so easy to work with. HOWEVER, could anybody please give me some advice on how to avoid those glue lines?

[@FHGroup]

Awesome, need to try this on mine!

[@cfm251]

I’ve used the light smoke tint on my taillights and it looks great, I want to do it to my headlights but I’m worried about spider cracks/crazing because of why I have read on forums. What is your experience with this?

[@s2skittleplays343]

Great video keep up the good work!!!

[@zQuellinHundo]

Bro the tail late is amazing

[@hondothehonda4759]

THANK YOU FOR THE PRO TIPS!

[@TheBadtobeblown]

Great video. Been looking for a really good tint film, think I may of just found it

[@Michael_00001]

You won't be disappointed. Just take your time with it.

[@Thatbeardguyron]

Goood stuff man! Thank you.

[@SaurabhKaisare]

Superb. Thanks . Do you use primer at the edges of a normal vinly. I have seen that done in 3m car care garages

[@williamquagliana690]

Awesome video thanks man 🤙🤙🤙

[@brianjohnsted]

Looks Awesome

[@jorgeagarcia9557]

Excellent job

[@winettemotorsports96]

Very informative man thanks 🙏

[@rainbro7941]

I did my Denali taillights with this stuff. It's easy at first, but once you start having to navigate corners and edges it gets tedious and using the heat gun becomes important. You can melt the vinyl too much :-) Try not to handle it anywhere where it will touch the lens, your finger oils will eventually cause it to peel. It also seems best to try and wrap the edges around the light otherwise it may peel off.

[@Kaabosurron]

Mine just came in today just in time to install mine

[@joesanchezii4461]

Great job as usual, but I had a question, you see how once you have tinted the tail light, that shade of red looks super nice, do you have that exact same color available in a car wrap? That color looks super nice.

[@tjv9419]

Very nice job👍

[@ibo1137]

You make it look easy. I tried this on a Ford Fiesta MK7 that was impossible to get it perfect without all the lines and bubbles, so i gave up after 1 hour of fighting and pain in the hands. But i had the taillights off, of the car. So that may explain it.

[@htconex19062012]

Cleanest shop ever

[@SuperiorAutoFlips]

I have been trying to wrap some tail lights on a 2018 charger with the Vvivid matte black and i must really suck or the vinyl sucks because it continues to mess up lol, excellent work man!

[@toddsteffek3405]

that is awesome information, thank you

[@John1doe]

Great job brother 👍👍👍👍

[@LosMt2]

Great video, I did my 2020 WRX tail light today. Used this as a guide and just went with it for the most part. I'm happy for being the first time. Subscribed for the rest of the STI video 🤓 Added note: 8:30 I bought this vvivid film and the reverse looks brown so not sure what happened but meh

[@wrapcityhqvicmelbourneaust6570]

Thanks buddy you're the best

[@enfield7123]

Really brilliant video I thinking of wrapping my vauxhall mokka lights 🥺

[@douglasgarcia8577]

Love the video! Not sure why people hit thumbs down... I would love to see you do a CTS V coupe

[@raulh011]

Thank you!!

[@crow9760]

looks a lot better

[@DoradoFever]

Thank you for the tutorial, about to try on my car... again... the 18 Sonic Hatchback is a very challenging taillights to wrap... tried dip but hated the matte finish and tore it off.

[@mitchdales123]

I bought some Vvivid Dark Smoke vinyl tint I'm going to try this weekend on a 2017 Civic. Should be interesting with all the curves on those taillights haha

[@Roadsurfer2k11]

Did it turn out well? I'm thinking of doing a nissan juke but it has some crazy curves/angles on it. We'll see.. fortunately the vinyl is cheaper than full vivid CF sheets. I've already had to do a mirror 3 times just to get one done with few wrinkles on ends, and hood done twice (heat gun too close 🤨). I need work on getting mirrors done.. the pull over isnt distorting CF design/trying to match inlay

[@jocalibusohump]

Looks great!!!!

[@geopin7672]

Awesome homie✋

[@logansheppard3066]

I have one done, this was a nightmare man, you impress the shit out of me lol

[@73mazer]

Wanted to see you do the brake light! Aside that 👍👍

[@iamhinda1792]

I love the content of your channel

[@gmp6526]

Thanks I did DIY and almost came out great for a 1st timer My question how much do you leave on the edges so the vinyl wraps around the light? I cut to near the edge and noticed the following day started to peel back Any suggestions?

[@cc6722]

Gorgeous

[@clips5609]

good job tom