Tinting your Taillights the right way with VVIVID+ Smoke Air-Tint

Get Air-Tint Wraps here:
www.amazon.com...
Follow CK Wraps Here: / mrspydergt
Tint your headlights and taillights in VViViD's Smoke Air-tint. It is the fastest and easiest tint to install on almost any shape! Try it today
You can shop for more wraps here:
USA and International: vvividshop.com/
Canada: vvividshop.ca/
Social Media:
Instagram: / vvividvinyl
Facebook: / vvividvinyl
TikTok: / vvividvinyl

[@oldskooldoritos]

used this smoke tint on my mk6.5 jetta in 2018, was my first time tinting tail lights and i used this video to help. the tint lasted until last year so i removed it and ready to do it again! thank you for a great affordable tint and these videos

[@TexasDragon2007]

Did the headlight tint on my 2018 Dodge Journey. Used the Vvivid Smoke Grey. It went really well. I removed the headlight from the car to "wrap" them. I love how forgiving the material is when a crease forms. Just pull it back up, stretch and a little heat, lay back down, and done. They turned out perfect. Thank you Vvivid for a wonderful product!

[@MAC35REM]

Does it change the brightness of your headlight?

[@VViViDVINYLS]

@@MAC35REM Yes, we don't suggest using the dark tint on headlights as it does reduce the transmission of light BUT a light or subtle tint will not be very noticeable. If you have headlights that are generally not bright and you drive a lot during the night(i.e work like deliery etc) maybe no tint should be used just in case.

[@MAC35REM]

@@VViViDVINYLS - I ended up using the Vivid Clear Hex, rainbow colors on my headlights after a restoration I had done. They came out fantastic and the film was great to work with. I am so happy with the results. The Vivid clear hex vinyl colors show beautifully during the day and at night. Thank you! 😊

[@gordonmulcare1427]

Well that wasn’t too difficult, was it? Cheers!

[@rebelyoot1927]

This helped with my Honda Fit tail lights. They have the stupidest angles imaginable. I have bubbles and ripples but with a design that complicated, Im satisfied. (still gonna redo it later on)

[@MicJaguar]

Nice. Been having trouble with my tail lights on my F-type. Has a sharp edge in the design. Hope i get it today.

[@GForceVRX]

Hi there, I’m finding it difficult to find this exact lighter tint on Vvivid’s website or eBay , are you able to by any chance put the link up for it for me to purchase? Thank you in advance

[@yammmit]

Amazon is the best place to look

[@Sami-om6vb]

I need a video for a ford F150 lightning lightbar please!!! I’m trying to fix my strategy before starting and I’m still not sure how to attack that project 😢

[@Werk4Cash]

Dude who’s mans drives this car, never seen a basic SUV get wrapped and on top of that get smoked tailights...

[@andylane1968]

Yes the only thing it does is take the glare out and make the light look sharper. Great video Chris.

[@capt.crunch1276]

My 2018 F150 is incredibly difficult. I'll be trying again today

[@craftedbychris1721]

About to go do my 2019 ram 1500, wish me luck

[@20tea]

Older video, but just tried this stuff with incredible results! Thanks for the tutorial and will be using this on other projects too. Thank you!

[@sittingindetroit9204]

Did you use a heat gun? Do you think a hair dryer would work okay?

[@20tea]

@@sittingindetroit9204 No, just invest in a heatgun. Sorry, the the blow dryer doesn't work well for the job. You can find some for a reasonable price.

[@sittingindetroit9204]

@@20tea thanks

[@sittingindetroit9204]

Do I need a heat gun or can I use a hair dryer on high?

[@ganador13]

This tint is terrible. The glue from peeling off the backing has a pattern like a snakes scales. No I am not talking about the deliberate hex pattern on some.of them. This one claims a glass finish, but always ends up looking hammered. They won't show you that on their videos. Don't waste your money, this stuff is basically tinted packing tape that stretches a little and always has a hammered finished. Buy spray tint instead

[@HOHOHOMOFOS]

I couldnt get anybody to answer me when i asked vvivid if they had precut tint for headlights and taillights was kinda disappointed in the customer service they looked at my questioned and ignored it smdh..however the wrap job looks good tho cheers

[@Irqyy]

thank you for this!

[@newersify]

this is the most German man I have ever seen

[@RazerLavey]

Tried this on my Infiniti G35. The indents in my lights made this VERY difficult. Its not at all flat. But still came out decent enough for me to keep it on. ANY other tail light would be easier than mine I'm sure.

[@3xeplodng_3agle_studios]

I'd like to see someone trying to tint the elantra N taillights 😬😂

[@thereallLp]

i'd like to see someone do the 22' Impreza

[@homerdadon6363]

same thing with Acura tl

[@miday7391]

Try my Tacoma lights lol

[@johnnyfreshmusic4497]

This vivid wrap wasn't for me the light tint looks purple more then a smoke . Alos the adhesive wasn't forgiven you could literally see it in the lens . Not a good look especially if your trying to make it look clean .

[@jay83154]

this video makes me feel like I can do it. You make it look easy. I can’t wait to get out there and try it. Aye where yall located so I can drop my car off after I fu*k it up 😂😂😂😂😂

[@g8beast679]

Well I put this on my Headlights a year ago. Today decided to tske them off and It leaves so much glue residue that I can hardly see anything. Very difficult to take off. Ain't putting this ever again.

[@techvidz93]

Try tar remover- I went through the same issue with removal a week ago (entire tail light covered in glue) and Carpro TarX got it off completely.

[@stevegordon8214]

just refinish the headlights .. should only take a a few hours....

[@breonnahdunlap315]

Goo be gone worked just fine

[@ishmindersaini9073]

Is heat gun important?

[@alllivesmatter1792]

Why didn’t you use the same rectangular piece that was there to begin with? Why did you have to cut another puce for the same rear light, then right side? Was that a waste of product? 🤔

[@dcchicken75]

Would it be possible to use this tint on some machine faced wheels to kind of tint the face of the wheels, almost like a black chrome-ish feel???

[@E-Naut]

Would you be able to Tint a motorcycle tail light? Some of them are a little more complex vs car break lights

[@MRBETTO700]

Thank u man I'm trying do mine right now.

[@keegs87]

Had the worst time getting around the curve of my 2017 ram. Ended up being a fail. No chance of a ram video soon?

[@midlifecrisisactor7655]

What the hell is all purpose cleaner? Dishsoap? Pinesol? Vinegar? Wunder? Alcohol?

[@rainbro7941]

Is there a protective layer? Meaning is there clear film to peel off after it's complete?

[@TwistedDrag]

Will this damage the headlight when removing if left on too long?

[@lusio2507]

Job well done. Very nice

[@c7uk]

I don’t understand how you don’t get glue lines when you reposition the film? I did a very simple, flat lamp recently and it was very much a one-shot-deal! If I had to lift to release a bubble, I got a visible line at the point of adhesion... turned out great, but the ‘risk’ was there

[@VViViDVINYLS]

The adhesive on VVIVID compared to other brands is low initial tack, it spreads stretch over a large area so you dont see lines. The only times you risk glue lines is when heating the film and activating the adhesive to full strength ( or installing in the heat) and/or leaving the material on a surface for an extended period of time.

[@yanito8508]

that red car wrap is pretty slick too

[@corymauch779]

So I just removed my vivid headlight tint after it had been on for about a year. So some glue residue is left behind, what’s the best way to remove it.

[@VViViDVINYLS]

Usually you can rub it off with a finger or wipe adhesive remover like goo gone and wipe off. Let us know!

[@chvydrptop]

Chris, great videos. I was wondering if this was the lightest tail tint you have used?

[@8ssteve994]

Awesome, liked and subbed

[@anon2414]

What happens if you tint both sides at the same time and cut down the middle? I'm doing mine on Saturday

[@TS-mq2oi]

i wouldnt because its harder to get a proper stretch and a tight fit it will pee

[@sunxero8321]

Hey man, love the stylish "Boom" haha

[@shescrafty8092]

You do such a great job and you make it look SO easy, But can you do a video of you doing truck tail lights? A silverado..i only see cars and trucks have fatter lights and alot more stretching ugh.

[@randomwithreno55]

Well guess f'in what - was did my headlights with a roll mailed to me with vertical wrinkles - now I've been on hold for 15 min only to be told - we cannot take anymore calls

[@Scott-kr8yx]

Can you tint a cracked tail light to save on buying a whole new rear tail light assembly

[@VViViDVINYLS]

It depends how large the crack/damage is. If you’re able to completely cover the damage in a way where water would not infiltrate, then it would definitely work! Cheers

[@costasgeorgiou5015]

Wouldn't be easier just to pop out the taillites? That left tag lite is definitely dimmer then the right! 😝

[@rjkehoe6441]

what tint do you suggest for taillights and for headlights? same one or different? I don't want my headlights to be dull great video !1

[@misakomoko]

wanted to see side of tail lights how it wrapped up when the back door open

[@ryanhill9366]

Informative video but the music made me want to rip my ears off and throw them in the river

[@SnoopDxggy]

what pink wrap is that in the back

[@FiftyCalFit]

followed technique to wrap my m235i headlights and they came out perfect!

[@Scott-kr8yx]

Can you find comment 622

[@JustLikeGreta]

Would it not be easier to remove the entire taillight assembly?

[@VViViDVINYLS]

It's easier to leave it on as it is anchored down and you can pull/stretch the film in a way that is manageable. Great question though!

[@jakefriesenjake]

Maybe if you take off the taillight, then make a firm wooden structure, put it in your vice, and then bolt the lights to it, and then tint it..... I used this tint for my 81 Camaro Z28 T-Tops cause they were scratched pretty good. The overall effect was awesome. But, since it doesn't have a peel protection layer, when I installed it with a credit card and trying to get some bubbles out, I scratched the tint a bit. (rookie) I got more tint and better tools to install. Will attempt it again soon! Gonna raise the temp up in my garage to assist in the installation process. The first time I did it, the only T-Tops were on my table. Pain in the ass. Now they will be on the car forsure!

[@RicardoMichie-k5h]

Hodkiewicz Shores

[@JerryHicks-s2f]

Hartmann Land

[@ClarissaBarlow-g6i]

Abigayle Cliff

[@Kalicensored]

What level color tint did u use?

[@ReneJessen-k4y]

Camylle Corners

[@DorotheaStuart-d3c]

Alice Walks

[@SmedleyZebulon-j1d]

Bechtelar Hill

[@SdjJshs-f6h]

Austen Court

[@JamesChacon-f6y]

Lubowitz Ville

[@TandyLavy-m3z]

Roob Meadows

[@PeggyValencia-x2w]

Torphy Plain

[@AliceBlakemore-o4w]

Grant Crossing

[@omarramirez6750]

Is it possible to cut out the reverse light with this wrap?

[@josedelcastillo9996]

I want to buy the same roll you have All I see is small ones

[@NewmanRex-y8g]

Lockman Land

[@SidneyMorris-g7k]

Genesis Branch

[@DavidDavidson-v8k]

Tomas Meadows

[@BloomerElton-z8n]

Jaycee Fords

[@TomlinsonDennis-k6q]

Muriel Place

[@ThurmanPioche-n2s]

Rempel Mall

[@WaltonRupert-w9g]

Kariane Turnpike

[@VictorCarol-h4u]

Champlin Spur

[@AugustineStargell-x9l]

Wolf Hill

[@OccamBurton-m6t]

Anna Lane

[@RonSavage01]

My tail lights have tiny raised lettering in one spot from the factory and it looks like I have bubbles there but I don't. Any suggestions?

[@Lil_B3b3]

heat and a small tool to push it down around the letters

[@HarryAnne-s3x]

Hudson Stravenue

[@bluerineimb1148]

Hi great job wat is the tint shade Grade

[@RichardHuey-e5h]

Kulas Islands

[@henrylong45]

I hope you're still monitoring these comments. You used a VERY VERY VERY light tint. I want a DARK tint. Can you send me the link to order the DARK tint. The Amazon links for this product were VERY CONFUSING for me. I just want a DARK Smoke Air Self-Adhesive Tint.

[@Forgon_1]

I could almost hear you over the music quiet down already

[@127laxbro]

Great video.

[@chadjynx-thegreenbastard876]

nice video was a big help........bigups

[@AugustusPolly-g7x]

Nedra Passage

[@McCarthyLetitia-u5w]

Linnea Roads

[@barryobrien6088]

Thanks man its very informative...cheers

[@SarahLopez-z7n]

Harrison Turnpike

[@GIOVANNI-vf5ox]

Well I hope all those douchbags with blacked out tail lights watch this proper way of tinting your tail lights video. Job well done. Personally I don't believe this is good practice, but your video has demonstrated that it can be achieved if done properly.

[@ifGarage]

So you don’t have to wet the tail light or the back side of the film?

[@E-Naut]

It is slightly sticky without heat, when you heat it up it activates the sticky side and that's how you get it to stay more permanent.

[@ifGarage]

Jesse&Baylee _ Good to know, I’ve always used water as a lubricant whenever I tinted small pieces. I guess this is the new generation of tinting? Lol

[@genosiano927]

Could i use a hair dryer instead of a heat gun?

[@kweirmeir]

Just did it with a hair dryer no problem

[@MatthewMarvin-i5f]

Talia Islands

[@kingstonsean]

Fantastic. Thank you.

[@Uditha]

This is illegal in states, don't know about EU... But in states this is illegal

[@danim04]

What about the back up lights? They won't be as bright.

[@phosphoruspharaoh]

You are a wizard!

[@manocoulin1845]

Used this product many times and it has been fine for the most part. However, after re wrapping a customers tail lights in the darker version, a TON of adhesive was left over after removal of the lighter tint. Spent a good hour and a half rubbing off all the adhesive before I could re wrap them, which only took 45min to wrap both lights. Not a very good turnover time if this is what I have to do in the future.

[@VViViDVINYLS]

There is generally no adhesive left, especially on the newest versions. However it depends on the type of light and the heat created by the bulb. Constant heating and cooling over an extended period of time may loosen the adhesive - this is true for any vinyl.

[@g8beast679]

Totally agree. I took mine off after one year and it is full of residue.

[@OlenNittler-f3o]

Little Passage

[@RutheSugai-q3w]

Lora Gardens

[@TrudieGolberg-q2i]

Myrl Circle

[@CindyBooth-c4t]

Wiza Bridge

[@JosephSanborn-y1f]

Kristoffer Road

[@littlebittathisnthatfirear8048]

Is this ticketable in most places?

[@mikemike5206]

You talk way too much. But you ďo good job.