The Palit RTX 3070 Drama: Finally Resolved!

[@northwestrepair]

You can get a cheap micro lens that will work for any thermal camera as long as you able to 3d print a housing that will get it easily attached to your specific camera. I used one for seek thermal. Lets you get very very up close and see the details.

[@GraphicsCardRepairs-tk7ql]

Yes I need to get one of those . It will really help me get close. Thank you 😁

[@teixopoison601]

Nice to see you helping the community 😎👍

[@TechnologyHive]

Great video! Hit the 1k mark! Congrats brother!

[@GraphicsCardRepairs-tk7ql]

Thank you 😁

[@RuwanTech]

Great job. It’s depends on the previous experiences.

[@GraphicsCardRepairs-tk7ql]

Thank you for sharing 😁

[@tafadzwamusekiwa659]

Love your content, thanks for the upload. This repair is simple to an advanced technician but very complex to someone without enough practical experience. Thats my opinion

[@GraphicsCardRepairs-tk7ql]

Thank you 😁

[@mart43]

Nice job as always! Not that hard of a job, in my opinion. Also, I was wondering, what cloth do you use for cleaning?

[@GraphicsCardRepairs-tk7ql]

Thank you 😁. This cloth is polyester fabric cloth

[@northwestrepair]

Are you on my discord by any chance ?

[@GraphicsCardRepairs-tk7ql]

Yes I am. 4090 query you answered. That's me.😁

[@ted-b]

Another great job, it may be easy for an experianced Man. Not an amatuer!

[@GraphicsCardRepairs-tk7ql]

Thank you 😁

[@amtpdb1]

You said the 8 pin is shorted with 100 ohms. What should you see? Thanks

[@GraphicsCardRepairs-tk7ql]

Any short above 5 to 10 R are difficult to detect. Sometimes low voltage injection will not do anything. You might have to increase the voltage depending on where you are injecting it. For example here I could have gone up to 12v. But the idea is to start with 1v and move up the voltage if you see nothing.

[@amtpdb1]

@@GraphicsCardRepairs-tk7ql Thanks for taking the time to respond. Have a nice week.

[@muazzambhatti1672]

this repair's difficulty was normal but only if you have the right tools . if you didnt have the thermal camera i dont think you would have found the fault and that would have made the repair much harder

[@GraphicsCardRepairs-tk7ql]

Well explained. 😁 Thank you

[@ariewijaya1679]

But if your thermal cam is broken and you don't want to pay again for that expensive gadget as cheap alternative you can use rosin smoke that very sensitive to partial short capacitor

[@GraphicsCardRepairs-tk7ql]

Yes I have that too. Kept it as back-up. I used to use it before I got into a thermal cam craze.

[@alialbeloshi5425]

Nice bro , waiting for mine to be finished 😂❤2080ti

[@GraphicsCardRepairs-tk7ql]

You will receive an update.

[@sheshable25]

Where are you located bro what country

[@GraphicsCardRepairs-tk7ql]

Dubai. UAE 😁

[@sheshable25]

@@GraphicsCardRepairs-tk7ql can i know how much fee you take for asus tuff rtx 3070 not detected with repair history

[@GraphicsCardRepairs-tk7ql]

Sharing the link to my website. it has the pricing graphicscardrepairs.com/faq/

[@martinmalone6324]

strange failure filter?

[@GraphicsCardRepairs-tk7ql]

Yes an odd one.

[@motherboardrepairsPH]

Its complicated on repairman with no tools like me 😅, i have no thermal cam,no microscope, no dc lab power supply, no oscilloscope, the only i had is a hot air, and a tester and some flux, poor me im not lying 😅😢

[@GraphicsCardRepairs-tk7ql]

Well is a start somewhere. You can gradually build on it. Trust me i started the same way.

[@Mohamed.Hassan84]

good work man pailt 1650 no view

[@GraphicsCardRepairs-tk7ql]

Eventually it will 😁

[@Mohamed.Hassan84]

@@GraphicsCardRepairs-tk7ql ic 4E=8ex6f i need this

[@GraphicsCardRepairs-tk7ql]

This looks like a marking or batch code. the part number is required. where is this part connected, on which voltage rail is it connect? You wold need schematics to get the part number.

[@markholmes8803]

its simple if you no what you are doing.

[@GraphicsCardRepairs-tk7ql]

Thank you for sharing. 😁

[@EinSwitzer]

Routines

[@frazerxavier7295]

Yea 😁