The PS3 4.90 Jailbreak Has Arrived! Get It Here

[@blainelocklair]

PS3 multiMAN Setup Guide Power Up Your PS3! ➡ kzbin.info/www/bejne/m2LPnmete8-eq5Y

[@breaktube]

Nice, have there been any updates to multiMAN since the video was uploaded ? Thanks for sharing !

[@ItsMoAlawneh]

this page cannot be displayed 80710a06!? Any tips??

[@H2AZfitness]

Hi blaine thanks i get to the USB system update, drive is detected in photos….and i get no applicable update data was found message when clicking update via storage :(

[@MWren]

@@H2AZfitness i am having this issue, have you found a fix?

[@H2AZfitness]

@@MWren do it in safe mode…hold power button 10 seconds when off, then another 10

[@GlizzyAssassin]

I JUST got my PS3 out a hour ago to try and mod it. This channel never disappoints. Thank you so much

[@BLAZEDBEATzz]

Samee homie no capp🔥

[@bvndmxn567]

What can you do with a modded ps3? Im modding it right now. But what are its capibilities. Free games like vita?

[@ashishgajare9338]

​@@bvndmxn567 free games , change some system settings which you normally won't be able to ( only do this if you know what you are doing) , you can run older ps console games like some ps2 games and other stuff, also you can download mods of different games

[@lisciu9909]

i love the way you put ad in loading time so it plays while you are waiting anyway

[@emothema]

To anyone getting the "Unable to find update" message, launch the ps3 in safe mode by powering off, holding the power button until it turns on and off again, and then holding the power button until you hear two quick beeps.

[@starglazzer69]

hey i just wanna know is this possible using a ps4 controller

[@babasi44]

thank you so much

[@bloomed_3880]

ur awesome dude thanks allot!!!!!

[@london4633]

And then flashing the update another time from setting right?

[@emothema]

@@london4633 yup

[@homoman8699]

This is the most perfect timing, i was literally just thinking of modding the ps3, thanks for the tutorial!

[@blainelocklair]

You're welcome! Wait, you didn't know I am a mind reader? 🤣

[@francisarboleda1721]

when can it run ps2 games off from the hardrive?

[@ItsMoAlawneh]

@@blainelocklair this page cannot be displayed 80710a06!? Any tips??

[@Speedyx485]

​@@francisarboleda1721After you install the software

[@penguinrebellion5916]

Same dude.

[@intellectualninjamonkey2496]

Done! I can't believe I did it myself self! Years ago, I had to pay a pro in order to do it on my Wii. Should I feel proud? Maybe not so much, as these instructions were so perfect and straightforward that anyone could do it. Thank you so much, you got your self another subscriber.

[@Daevoz]

The more you know (:

[@Mia-gg6eb]

u know what? im proud of u!!!

[@chrissama11]

Oh brother, modding a Wii is so easy, whoever did this scammed you 😭. But I been there too, so I'm happy that you managed to do it for the ps3 :)

[@bogdvnmnl]

blaine you're a life saver ... recently webman mod for some odd reason stopped working and my ps2 games all of a sudden needed ps2classics placeholder (which i did not have to use at all) and now i'm jailbreaking again

[@estevezjaques9483]

My man is a legend

[@kentda]

He ignores everyone

[@josephhall7317]

​@@kentdaI don't think I've ever seen a reply, maybe 1 or 2

[@warrenjenkins9246]

Fantastic work you put out the mod community needs people like you helping us all out

[@emptycasketcreations4697]

100% no one has given better instructions on anything I've modded that you'll get here.

[@gibbo9089]

Got a PS3 the other day and modded it up tp 4.89 hen but wasn't all that impressed. Was going to use CFW but then the update came along. So had to wait. Was hoping you'd do a video on it as I didn't trust the other ones out there. Yours are so easy to understand and follow along. Will watch the hen update you promised and then decide.

[@reehanislam5386]

I tried doing 4.89 hen to 4.90 CFW I’m currently struggling, any ideas

[@zlatan.krsmanovic1986]

@@reehanislam5386 try reseting ps3 to factory settings first then do this as shown in video

[@Gsxrsixhundred]

@@reehanislam5386 i just updated from 4.89 hen so its possible make sure to follow video to a T and play it back as many times as you need!

[@chadschlegel6344]

I had OFW 4.81, and went to OFW 4.90 first before doing the tutorial and everything worked beautifully. Thank You!😀

[@1234567895182]

For anyone getting "this page cannot be displayed" error at 10:16, I solved it by doing the following: 1. I am using my laptop which is connected to the exact same wifi that my PS3 is connected to. (Previously I was using my desktop which is connected via ethernet and does not have wifi) 2. I disabled windows public and private firewall. You can enable this again after you finish the jailbreak, but it seems it has to be disabled for this to work.

[@lxor]

same problem

[@Friendlyman487]

It literally won’t let me disable the fire wall like when I slide the slider to off it goes back to on

[@Mikeyy410]

BROOOOOO THANK YOU, THIS WORKED FOR ME

[@brettwodon5896]

this works thank you

[@1234567895182]

@@Friendlyman487 Late reply sorry. Are you the admin account of your laptop? I suppose it doesn't have to be a laptop. But your PC and PS3 need to be on the EXACT same network (no extensions, etc). But I'm pretty sure you need to be admin to change these settings.

[@BaneKing57]

Hey thanks. I go to your videos for alot of my gaming "how to" videos.

[@blainelocklair]

Thanks so much for the Super Thanks! I just saw it and I'm very grateful for your kindness. :)

[@evodannyt]

It works! Thanks for all you do. If anyone is having trouble on your ps3 reading your usb drive, you will have to do the first update in safe safe.

[@kodibrown5279]

How do you put your ps3 In safe mode?

[@beonfire]

thanks

[@killride69]

im having a problem stating the file is corrupted, even in safe mode wont work...any ideas?

[@michaelduford1810]

Me too same here file are corrupt error code 8002f997

[@aileonatilopan]

Note: if the file doesn’t get dumped on the usb flash drive make sure there is nothing else plugged in the usb ports of your Playstation 3 system.

[@JordanJacobson]

thank you!

[@cathalmckinley6297]

Any other tips to get this to show , still having trouble

[@KeepItReal337]

do you know a fix for when it says patch operation aborted?

[@10xxmike3]

What if my ps3 just won't read the drive at all even after double checking

[@hitquit9838]

best step by step explanation Ive ever seen in a walkthrough. Earned my subscription!!!

[@Wiiilooow]

Fr even my grandma can do it now, and she is 93yo 😂

[@snakesprocket7187]

To any one who’s having the „can not be displayed“ problem -you need to be in the same (private) Wi-Fi Just pull out your Ethernet cable if you are linked through that and connect to the same Wi-Fi as the ps3 That did it for me

[@soennel]

thank you!

[@slaughternut]

im having an issue where i go t type my ip in the internet explorer on the ps3 and with the :80 at the end and when i click search it pulls up random websites and not the flasher

[@iancamfield877]

i fixed it by using the other ip address that was on there

[@jacomuller9197]

you are my favorite youtuber. I dont even search youtube when I need to do something, I just go through your videos, I know I'll find what I need there

[@iBMcFly]

Yeah he’s a boss

[@Leedleleedle101]

11:26 you cannot use this tool because your console is incompatible with cfw edit: I now know why this won’t work but there should’ve been clarification that super slim does not work, regardless for anyone who came across this roadblock do not try this with a super slim go for a hen instead.

[@BalRavensinflight]

Thank you very much for commenting this; I had the same issue.

[@Dagherito]

Thanks man ❤

[@Jay-eq1zb]

im having trouble with the web part my wifi is set to private and nothing 🤔

[@prachetpatakula603]

The dumping has been taking around 15-20 minutes now. What should I do?

[@SpaceTheCake21]

Oh yeah, as usual another perfect tutorial. Worked just fine. Thanks Blaine

[@bearabletable7527]

aweosme to hear. Im ma do it to my 60GB launch edition with PS2 backwards compatibility. :D

[@adelutu32]

I'm stuck on the NOR/NAND page on my PS3, after I Run checks it doesn't give me the patch file, it says " You cannot use this tool because your console is incompatible with CFW! " .. Anyone faced the same issue and solved it ? All in all, the video is very well explained and it shows how much heart you put in it 👏

[@JorgeGomez-hx5uu]

yeah same

[@khaledmedhat9798]

Did you solve it?

[@aaaawubadugh8054]

Hey everyone I’m pretty sure you have an incompatible model. Such as the 3000 series of PS3 Slim is incompatible with CFW. He doesn’t mention this in the tutorial stating every single model works with the slim but this is absolutely wrong. You might have to download HEN instead of CFW. But I recommend checking what models work with CFW.

[@joshfolsom1785]

​@@aaaawubadugh8054do you know if it would work with a 4000?

[@Antnj81]

6:03 I did everything you said and I'm not getting the pop-up window 🤔🤷🏻‍♂️

[@JohnGatsbyThe3rd]

This was by far the smoothest jailbreak process i've ever went through

[@dooovde]

ever gone through

[@Burner8016]

I have a already jailbroken ps3 on 4.81 and I cannot for the life of me start a game. I’m banned but I try to play offline and I can’t start any game. I try to and it freezes on start up right as I click. I’m very lost and need help on what to do!

[@spleefian]

the wait has definitely paid off this is amazing

[@TheGam3Br3akeR]

Didn’t have to wait if you used the unofficial bgtoolset websites. I’ve used them multiple times with multiple PS3s as a test. It acts exactly the same

[@bvndmxn567]

What can you do with a jailbroken ps3? Can you get free games like vita?

[@NickJJH14]

​@@bvndmxn567 yeah lol

[@toobi9036]

It says : unable to determine if NAND or EMMC data! Too much curruptions. What am I supposed to do to fix it ?

[@ricelord4503]

I'm having the same issue

[@xcalextreme]

Perfect explanation and no problem guide. Subbed + liked. Thanks from the heart.

[@mutha-moses]

You cannot use this tool because your console is incompatible with cfw please help

[@khaledmedhat9798]

Did you solve it? I have the same problem

[@gary141]

Getting an error saying page cannot be found when trying to enter my IP address to load the website for xampp, any ideas?

[@cjrh6770]

Allow the application through the firewall on your PC

[@joemartinez9915]

Same problem and I tried fixing the firewall still same problem

[@Prod.DAARK580]

@@cjrh6770thank u man, I was finna punch something

[@MrTrev80]

Seen there was an update. Instanly went to this channel to see if there was a video. I was not disappointed.

[@mattb9664]

It's the best when an actual adult makes these jailbreak how-to videos. Tried watching a video last night of some teenager trying to explain how to organize the PSP folders...totally left out the step about how there needs to be a text file in the root folder, but I figured it out.

[@megacide84]

Awesome! The last year my PS3 Slim was confined to the 4.89 Hen. Now, I can finally finish the job and fully mod my unit. Kudos!!!

[@petrosbarbopoulos]

Quick question: what ps3 slim do you have : 120 250 or 320 gb?

[@megacide84]

@@petrosbarbopoulos Mine is a PS3 21xx 160GB version.

[@petrosbarbopoulos]

@@megacide84 ty I researched about which ones can be cfw and which not also could you please tell me what are some disadvantages of hen?

[@jessyfields3402]

I swear ive folled everything by the letter, however, im stuck on the IP website as it does not show on the ps3 web browser!

[@minecrafter7291]

same

[@LeviathanTechWiz]

everything is working until i try to run hfw update on usb. its being read by ps3 but says there is nothing to update when i check media storage. Confused?

[@livarjunior]

Same problem for me.. 😟

[@3paxk]

Do it in safe mode

[@angelgraysanderson6644]

Finally got the jailbreak working with full 4.90 CFW. Thanks a lot and this is why I love ❤️ this channel cause you make things so "eeeeaaasy" 💯

[@5poundkush]

once i do the update the first time it says "The data is corrupted" 7:46

[@K0msur]

So my USB has the PS3 folder in it, and is being recognised by the PS3, but when I go to "update via storage media" it says there's nothing there? Any ideas?

[@daanvandooren3834]

Same problem here. Did you found a fix?

[@K0msur]

@@daanvandooren3834 Yeah, I had to boot the PS3 in safe mode and install it that way instead.

[@davidgill7412]

And just like that, we're back in business.☺️

[@Joseph_Vatanen]

when I put my IP address in the search bar and search it, it says the page cannot be casted, any thoughts ?

[@kabelo3231]

Same

[@Joseph_Vatanen]

@@kabelo3231 I used the alternative installation on the site and it worked

[@weegeefc]

i used my ps3 frequently for years and used almost all 60gb of it, that dumping process took close to 30 minutes lol

[@Mosketer45]

Yo I did everything up to here and when I put my usb into the ps3 it says there’s no update I NEED SOMEONES HELP 7:26

[@304Classics]

Safemode then update safely from there

[@Mosketer45]

@@304Classics I tried safe mode it still didn’t detect it

[@304Classics]

@@Mosketer45 try unpluggging the controller cord from the outlet as soon you press start and select

[@Bonemusic23]

Thank you for the detail video , you’ll the best !!!

[@ioannisstamatakis1312]

Perfect tutorial but i have problem. When i check PS3 NOR and run check it gives me the following notification: You cannot use this tool because your console is incompatible with CWF! How can I proceed?

[@adamnowak8072]

did u find a fix?

[@Matko722]

i have a ps3 slim 2504a and on the part where i press „run checks“ it says: „You cannot use this tool because your console is incompatible with CFW!“ has anyone a solution?

[@Kijana456]

hello, i followed the exact steps but mine is showing no applicable update data was found. requesting help

[@princerog9579]

Same here. Any idea?

[@princerog9579]

Did someone figure it out?

[@JLary71377]

Same. Please help Blaine

[@izzathizzuddin6557]

Hi, I am having a small issue. I followed all steps and reached the part at system update on my ps3. When I click “update via storage media” it says “no application update data was found” I use a PS3 Slim. I would very much appreciate your help

[@robot7968]

Found a fix?

[@izzathizzuddin6557]

@@robot7968 no I have not. I though I would send it to the shop if I’m not able to dig it myself. I did try few other methods and tbh I’m not tech savvy enough but all steps were followed as per the video.

[@AbO_MaHdI-7250]

Do it in safe mode…..press the power button 10 seconds when its yurn off hold it another 10 seconds

[@Richardk-ps7tj]

great now my ps3 is stuck in a loop thanks to this video

[@thegreatgambino5358]

I followed this step by step and now my ps3 is bricked 😅 oh well. At least i still have my ps2

[@coolpup6385]

Thank you Blaine! Just modded my ps3 again yesterday, much easier than using hen!

[@MrAweeze]

I get "the page cannot be displayed" when attempting to access flash writer exploit on ps3 web browser. The only thing I can think of that could be causing a hangup is that I'm not connected to my laptops IP even though I inputted everything correctly. I'm stumped as to how to solve this.

[@MrAweeze]

I turned off all security settings on my laptop and was able to proceed. I also used the search function rather than file address. A simple, but obscure, fix.

[@enriquemejia5861]

You are a Saint

[@MrAweeze]

@@enriquemejia5861 elated I could help someone!

[@anya2021]

thank you so much dude

[@scotter140]

@@MrAweeze what did u type intp search?

[@JNET_Reloaded]

it dont work not supported while using ps3 slim! how do i undo the firmware upgrade that thing i did twice?

[@Buegelbrett]

my ps3 says that it is incompitable with the CFW what should I do? help pls

[@QwertyXXIII]

SAME :(

[@rokuken]

For some reason, after I input the IPv4 as the address with the 2 dots and port 80, it takes a while and says:”The page cannot be displayed”

[@rokuken]

I figured it out. For anyone with this issue, just turn off the Firewall on your PC while connecting your PS3 and PC together. After everything is done, please do NOT forget to turn it back on.

[@209es1]

@@rokukenturn the firewall off on the ps3 while connecting the Wi-Fi ?

[@209es1]

@@rokukenI’m having this same problem

[@rokuken]

@@209es1 No. Turn off the Firewall of your Windows Defender Security of your PC in Settings for the Public and Private Network. Attempt to connect your PC and PS3 together and that’s it. Just make sure to turn those back on after you’re done with the whole HFW 4.90 installation process. If you can’t find it, go to Settings and in the Search Bar on the Middle-Top, type Firewall and you should be able to find it with no problem.

[@rokuken]

No. The Firewall on your PC. If it’s on for Public and/or Private domain, the PC and PS3 won’t connect together no matter how hard you try. You can turn those off and on under Settings and in the Search Bar, type Firewall.

[@0oljbs296]

now during the whole ip address thing in the ps3's browser it just says page cannot be displayed. I followed every step perfectly, now what do i do?

[@maxfernandez4172]

Same

[@minecrafter7291]

same any fix yet?

[@kamillos1342]

same problem

[@limited1397]

It says no longer available

[@klossso6665]

anyone found a fix?

[@JonathanCharland-l9p]

i don't know why it's not working for me I can't access the page on my browser

[@clarkestan4728]

not sure why but when i followed the steps when i got to the part when I put the flash drive in the ps3 the system did detect the flash drive but did not detect the ps3 folder in the flash drive allowing for the update, if anyone could help me let me know.

[@Jay-lq7uz]

i had this same issue. another comment said to use safe mode to install the hfw update the first time. let me know if it works for you too

[@Zeksii611]

For me it sais you cannot use this tool because your console is incompatible with cfw what do i do ?

[@kon4m]

Honestly dude, i have no words to describe how happy i am that i finally have a properly jailbroken PS3 lol. It's taken me a decade to get this done, due to never having the correct firmware at the time of finding the correct software to do it with 😆 Quite honestly, i could kiss you right now 🤣🤣🤣 Subbed, liked and following like i'm your shadow 👌

[@Kaizer_.]

is it possible to help me jailbreak my ps3? can i get ur ig im really struggling, your comment is fresh thats why im asking

[@sorayasayeh9135]

Watch toturials

[@vipjoker9106]

When i enter the ipv4 address of my pc n the ps3 browser its says the page cannot be displayed

[@youngvendetta1929]

were you able to get it done im stuck there too @@vipjoker9106

[@goofygoober26]

Thank you smmmm!!!! I ran into a few troubles which were when I tried getting my usb drive in fat32 it didn’t suggest a “g” I only had “c” and “d”, I chose d and it didn’t cause any problems! Second problem was that there wasn’t an update from the usb so I fixed it by updating it from safe mode. It worked! And didn’t need to do update it the other few times in safe mode anymore! All solved and worked!!! Thank you so much man🙏

[@Reflex7766]

2 years later and you helped me with the second problem thanks man

[@songokuch.4723]

i tried following the steps of safe mode but its difficult can you run me through it?

[@nicksuede230]

Awesome tutorial. However I get a "No Applicable Update Data was Found" error when trying to install the HFW. Even while in Safe Mode. I follow the whole video to a T. Any tips? Edit: Booted up my system in Recovery Mode and it worked like a charm.

[@IAMEXTAP]

you saved me g i had the same problem

[@KirmitTHEfrog]

Thank you

[@Theingloriousbastardo]

On ps3 browser it doesn't connect to ip adress..

[@Niklas-xc1eo]

Same

[@christokhan-ou9tn]

Hi I did everything the video said but when I ran the checks it's says (you cannot use this tool because your console is incompatible with CFW ) what do I do now plz can u help me

[@xandernoble3601]

I'm getting the same message someone help us please!😢

[@3paxk]

what model is your ps3? Is it slim?

[@timothyvahle2622]

I really appreciate the placement of your midroll ads, they always seemed to fall during portions of the process that take extended periods of time. Allows me to keep up with the video without having to pause.

[@lyriczz801]

Sir, thank you for the very detailed explanation. However, i faced a issue, i am doing exactly what you said but when i update via storage media in my it says NO APPLICABLE UPDATE DATE WAS FOUND. May you assist me on this matter?

[@Larilu064]

If you put your ps3 in safe mode, you'll be able to do the system update from there

[@alsoquellobello]

it says i gotta wire my controller but even if i do it wont work@@Larilu064

[@dayoff098]

It’s says the page cannot be displayed when trying to do the nor and nand

[@AllenPryor-z9n]

I followed the tutorial to the letter but when I try to install the HFW 490 update on the console, I selected "Update via Storage Media" and it said "No applicable update data found." The console is picking up the fat32 usb stick . Does anybody have ant idea what I may have done wrong?

[@charleshunt4354]

Same with mine

[@japyoo2248]

Same here.

[@GAMEZREDESYT]

Same

[@MolecularAnt]

Had the same problem on my CECHG04. Solution: like it says in the video, install the update in safe mode. Installed it in safe mode twice, then just followed the video to the end and everything worked out fine.

[@toddenneny5969]

Same in safe mode still not working

[@chasemcdonellpw974]

I keep having an issue every time I do the ip and port 80 and it just keeps saying the page cannot be displayed

[@carlosf.xblackjack]

Has anyone found the fix for being stuck on the mirrored website on the ps3? My wifi is set to private and all but it still can't find the page, thanks in advance.

[@Momen_Mohamed.]

Me too same problem

[@Nostalgia_Sells]

My problem too.

[@soennel]

10:16 mine says "this page cannot be displayed" what do i do?

[@hedgekage9572]

Waiting for the super slim tutorial 🙏👍

[@bwer8952]

you cannot put cfw on a super slim sadly. but you can install hen which is a soft mod. still able to get pkgi and stuff like that

[@ikealamp53]

It all went perfectly. Thx so much. Subbed!

[@0oljbs296]

when trying to update via storage media it tells me no applicable update data was found but im pretty sure i followed every step correctly. What should i do?

[@timmyd4426]

I'm also getting this msg. What option will "flash the .pup" in safe mode. Thx for the work Blaine!!

[@ernestlewis2483]

Do the update through safe mode. That worked for me.

[@0oljbs296]

​@@ernestlewis2483 how do I do that?

[@0oljbs296]

@@ernestlewis2483 nvm i've done it but now im hit with page cannot be displayed at the web browser portion 😅

[@ernestlewis2483]

@@0oljbs296 If you're talking about the part where you enter your IP address, check your wifi settings and make sure it is on private. The PS3 and your computer will communicate with each other. I have used Mr Mario's video for reference as well. He goes a little more in detail.

[@symbioticJ]

U never said anything about a port number in the comand prompt didnt work right

[@mathankumarponnusamy4018]

Everything working seamlessly until i get to the point where NOR/NAND selection happens and when i do "Run Checks" it is throwing me an error "You cannot use this tool because your console is incompatible with CFW". What am I doing wrong? Mine is a slim PS3. Appreciate your help on this

[@aaaawubadugh8054]

You cannot download this. I fault the creator for not mentioning it doesn’t work for certain numbers. Such as mine PS3 Slim 3000 series is incompatible with CFW so I’d have to look at a tutorial to install HEN

[@DamianShaw82]

Agreed. I hit the same wall

[@cyanide77x]

Same man.

[@RedReefer]

Any updates? How do we jailbreak if we have this error?

[@levi9874]

Yeah fr this just happened to me@@RedReefer

[@flipbacklip]

when i tried to install the system update it says data is corrupted 8002F957. what am i doing wrong

[@jamestunn3334]

sâme here

[@1972lesteryan]

Awesome video. Can you use these steps to update an already jailbroken ps3?

[@bigmikec902]

Blaine, I love your videos man thanks so much for what you do!

[@FallenM0th]

Does anyone know why exactly I can't seem to get the update file to be found in the system?

[@KB-cl3gl]

dude.. plug in ur usb then go into rest mode from there select system update and follow the onscreen insteruction.that fixed it for me

[@alfonslonnqvist5515]

@@KB-cl3gl THANK YOU

[@DeeMayne8100]

everything was working until 7:27 when i click the storage media it, tells me “no applicable update was found. any help is appreciated

[@JamesArden-p9r]

had the same problem, Reset your PS3 (turn on & off) then I placed the two files inside that folder directly onto the root of the usb and deleted the original file then it worked

[@Anonomyus616]

When dragging and dropping the file on the PyPS3Checker, it says ERROR: unable to determine if NAND or EMMC data ! Too much curruptions. What did I do wrong ? (Btw, corruptions is spelled "curruptions" in the error prompt)

[@retrodad1973]

did you ever figure anything out? I am at this point today

[@Anonomyus616]

@@retrodad1973 you have to use the opposite, not sure what it was, but you need to do the opposite option of what you're supposed to do for the gaining of the PS3UPDAT file

[@donutkingthekingofdonuts7502]

​@Anonomyus616 what do you mean by the opposite

[@Anonomyus616]

@@donutkingthekingofdonuts7502 u have 2 options, whichever one it said to do, yu do the opposite

[@donutkingthekingofdonuts7502]

@@Anonomyus616 thank you, sir

[@masnakifla2717]

I have a problem when i open guiformat i only have d and c and i tried with a d and when i put usb in ps3 ant try to update it says that has no data bot ps3 recognize usb when i go to the pictures

[@tobiansalomons5204]

Hey Blaine awesome video! I just have one question, i already have my ps3 modded with cfw, and i have all sorts of games installed. But if do this in the exact way you did it in the video, do i keep my games or do i have to reinstall them. (The games are with pkg manager so i dont own them)

[@fantasydrift5159]

I know that you will keep your games if on multiman, but im not sure about pkg files

[@Telenovision101]

I need help, when I m at the web part, the website won’t appear and say it won’t reach. I put all 9 digits including :80 and it still does not work. I cleared cache and all the other stuff over and over again

[@lisameyers6436]

I'm stuck at the Web search. The browser just says blank.....

[@minecrafter7291]

same

[@3paxk]

watch this step 8:35

[@edamin-gv5st]

He forgot to tell you to connect to wifi before doing that

[@MadSpaceCat]

I’m stuck, why cant my ps3 find any update on the usb stick??????

[@Momen_Mohamed.]

Go to safe mode and select system update then press start and select button at the safe time and it will work

[@blakeharvey3276]

Anyone else have issue at the step when entering the IP address on the web browser? My browser just says page cannot be displayed. Thanks for the help

[@berrogtane]

I got the same problem but i have made the solution, i bought a hosting service to make my own website for this purpose.

[@raccoon_larvae]

@@berrogtane how exactly did you go about doing that? Trying to mod an old ps3 for a friend and ran into the same issue

[@StepheezyG]

My browser doesn’t work as well😢

[@michaellogiudice3999]

It's your anti-virus blocking it

[@michaellogiudice3999]

​@Stephon Grant it's the anti-virus bro

[@Big_Red_Devil_98]

When I search for my IP it says the page cannot be displayed. I followed everything step by step, but it still comes up with this error. Please help!

[@shamblernl6767]

I had exact the same issue. I'm using a wired connection instead of wireless, thinking it had something to do with that. Which kind of a way did. Just as when using a wireless connection , you have to set the Network profile to 'private' instead of public. That did the trick for me. In windows you can change that in 'network & internet settings'. Then click on the 'Ethernet' tab and you're there..

[@jfvira9844]

Thanks for a very thoroughly explained video!

[@blainelocklair]

Thanks for watching!

[@Aman_1024_]

Yeah so I was just trying to mod my Ps3 and in the computer the linked file is says it has a virus and won't let me open the file to extract😢 hoping to get reply soon

[@stevemyers3082]

Same issue here. This is incredibly frustrating. I wouldn't expect a channel with 100k subs to link a file with a trojan attached to it.

[@Knightoptyx]

Same issue. Trojan:Win32/Casdet!rfn

[@3paxk]

actually it's not gonna harm your pc and ps3, it is safe to install all you have to do is just turn off your windows defender and try to do it, it's totally harmless. I did the same

[@Aman_1024_]

@@3paxk thanks it helped

[@Aman_1024_]

@@3paxk I know it's no harm to my pc but windows defender wouldn't let me open the file

[@LVL58Designs]

Unplugging your USB and plugging it back in like that has a slim chance of permanently corrupting the drive. Thats why there is a safe removal option. Please dont suggest people do this step. Not trying to be rude, just happen to work in IT. I see this a lot.

[@aliatef7203]

wrong, you dont need to do this since win 98

[@LVL58Designs]

@@aliatef7203 Dude. It still happens in windows 11. I'm not sure what you are talking about. The chance is small, but it still happens.

[@cobb6984]

@@aliatef7203 do you know how electricity works?

[@phatbuddha79]

@@LVL58Designs Ali is one of those trolls who hope people follow his bad advice so people lose their data.

[@MrRobo226]

When I click system update it says no applicable data was found but the usb is recognized and every step to this point worked

[@JamesArden-p9r]

i had the same problem, I just placed the two files inside that folder directly onto the root of the usb and deleted the original file then it worked

[@CheckmateStallioN]

Does this mod let you play Dreamcast, N64, Saturn games at a locked 60 fps? Is there an option for super sampling Dreamcast and N64 games to look sharp? PS3 should be powerful enough to handle Dreamcast/Saturn emulation

[@blainelocklair]

I doubt it. I don't think it'd affect the outcome of emulation much, especially for challenging systems.

[@SAPPH1RE]

Wow! This was surprisingly easy thanks man! 👍

[@oggamer4198]

Hen 4.90?

[@blainelocklair]

Coming up next. :)

[@notbosoo]

Not out yet

[@nikhilkutewalla9181]

When connected usb to ps3 and try to update selecting "update via internal storage". Get "no applicable data found" error

[@3paxk]

same bro

[@3paxk]

got it. You have to do the update in recovery mode

[@SSJ5Master]

Thanks again for another great video guide. If I am on 4.89 HEN can I update to 4.90 OFW to start the process?

[@SSJ5Master]

Thought I'd just give it a go, can confirm that the process worked fine for me updating from 4.89 HEN to 4.90 CFW using this guide.

[@lostfarangm.m.g.6138]

​@@SSJ5Master did you update on 4.90 original firmware first and after installed the hibrid firmware 4.90 to start the cfw process?

[@dasilvasantos4340]

Man you saved my life thank you so much ❣️❣️ for both this tutorial and the multiman one

[@candoandrew30]

PUT YOUR PS3 IN SAFE MODE IF YOU'RE HAVING AN ISSUE WITH IT EXEPTING THE UPDATE 🧐

[@sarahrivera4050]

Thank you!

[@swiftastraa2079]

yea i put it in safe mode and it didn’t work at all

[@travianarobinson4397]

@@swiftastraa2079 its always something