THE RUCKUS LIVES! - Charging Issue FIXED

[@c.j.6616]

did I seriously just watch someone mow their lawn as content. Well played Motonosity well played.

[@Matthew026]

C.J. McNally next comes the live stream of grass growing

[@brannenthebranbarianhereot8502]

Have you not seen OG Doitwithdan? He did lawnmower vlogs.

[@motonosity]

+C.J. McNally 😅

[@ram1959]

Motonosity shoulda bought a push mower, i have one and it works great!!

[@AlexWayne1]

Please check your old connectior from the stator to the ruckus. i think how it looked, it just melted together and thats why it didnt charge. just looks like the problem i had with the connector. i replaced it and it worked just fine! :D

[@flatline7310]

That's cute. You don't have any grass to cut.

[@JustJesseOfficial]

flatline7310 I believe it's more of a trim lol

[@darren.66]

could always start a landscaping and "Honey-do" channel called "Mowtonosity"

[@bassonabudget2k899]

D. F. lol

[@WartakMedia]

im dying. lmao hahahaha

[@HalfdeadRider]

lol good one mate

[@timmydunn6185]

People please like this so he can see it... If the tail light falls off again, make small abrasions on the rear plastics and on the light housing itself before you glue. It will make more surface area and a stronger bond.

[@TW0TIRES]

Timmy Dunn He already did that

[@timmydunn6185]

TW0 TIRES oh ok thanks. I never saw him do it

[@tommysalami2679]

he didn't do that on the light mount

[@timmydunn6185]

SoBe 6 I'm just with him, I think it looks better with the clean look. But to each their own lol

[@icarusflight2396]

Mowernosity...... send it to powder and paint! You should street fighter that mower! Stance it, and get insane cuts!

[@turtlebone]

I use a manual mower. Good cardio! 🐢☠️

[@AmeX189]

New shirt idea! "Lawnmower build series" have epic graphics of grass being cut with the motonosity logo. Would buy.

[@motonosity]

+Alexis Gerardo lol Jake has that covered with the sand castle shirt

[@Graychristopherr]

Here’s how to change your counter shaft seal the easy way: The manual wants you to split the cases and all this craziness; however there is a much quicker way. If you lean the bike over on its right side (exhaust side), ideally up against a wall, but with a steep lean angle, all the engine case oil will shift to that slide. What this does is give you the ability to remove the seal without oil pouring out while you attempt to change the seal, and or having to do an oil change just to replace the seal. Once you’ve got the bike up against a wall, you can remove the shifter. What you need at this point is very small pick tool from Home Depot/Lowes. They usually come in a set of 3, with different style pick heads. It’s like $8 bucks. With this, you can easily grab the small seal around the shift shaft, and easily remove it. When installing the new seal, make sure you place a thin plastic bag (like the ones at Home Depot/Lowes when you checkout) over the splines of the shift shaft. Now you can take your new seal and push it over the splines (with the bag on them) and it will ensure you do not rip or tear the new seal while is slides over the shift shaft splines. At this point, you can take a matching sized deep wall socket and lightly tap/seat the seal around the shift shaft. Remove the plastic bag, and reinstall your shifter.

[@darylmorris2388]

glad the ruckus is fixed. been waiting for this. still trying to finish my build.

[@INNOVVDashCam]

Well done, you won't worry about your yard anymore. So interestiing to see you riding this small bike.

[@Yamahobbit]

so glad to see you got the Ruckus up and going again.

[@GromGarage]

Glad to see you got the Ruckus working again! Hopefully you don't have many more issues with it in the future!

[@henrygarcia473]

just remember the battery's purpose is to start the bike only that's why batteries have cold cranking amps...while riding the purpose of the stator is too charge the battery but at the same time it sends out AC current and it goes to ur regulator rectifier where it converts it to DC current for ur lights and accessories...well brother just a little info fro ur knowledge...later my friend good luck and take care and have fun riding...

[@RobertKwolek]

My dad used to work for a car supplier making components for most major car brands, and they always used industrial Loctite, which in no way compares with what they sell in any normal store. So if it falls off again, bypass anything you can buy at Home Depot and go straight for the industrial stuff (I believe it was Loctite 471 but they make different ones for different applications). They even use that stuff to glue airplane components together, so it's fail proof.

[@Krispykashew]

Glad you finally fixed it. Been missin' the ruck.

[@TheHistoryEngine]

I want one! The Ruckus, not the lawn mower, though I appreciate there's not much difference...

[@480tko]

I'm glad you got the Ruckus fixed. Good job!

[@tylersmyth7927]

It's about time you got the ruckus fixed. I love that thing lol

[@kidd0]

So many things got fixed in this video! I was half expecting you to fix the leak on the CRF right then and there lol

[@motonosity]

+Brussell512 I should've haha

[@ginomunoz9035]

Your ruckus turned out nice. Glad you were able to figure out the issue you were having. Shout out from San Antonio

[@motonosity]

+Gino Munoz Thanks bro!

[@budlightman73]

Next build series lawn mower

[@pimpedoutstereos9747]

Well done on fixing the ruckus

[@iansmith101]

all the mechanics are facepalming so hard it took a week + to solve, upside you learned new skills :) gj man

[@AboxofMonsters]

Sounds like you need a colder plug? Or gap it less with the upgrades The NKG platinum there like $9 each I put one in my klr 65o. Single and I have twenty percent more power. The factory plug is terrible.

[@Biddington_Farm]

So happy that the ruckus is back

[@siouxscout]

Motonosity, the only thing hes does quite it mowing, never mind all the bikes loudly coming and going from his house.

[@nickhaller1353]

It's working it's really working!! - anakin from the phantom menace when he was pod racing

[@sixtythree8990]

lowkey like the lawnmower shots plz do more

[@tommydingle3726]

Did you fix the loose bolt that u said you would fix 👌

[@motonosity]

+Tommy Dingle I did :)

[@detthan5]

Been waiting for a while to hear about the ruckus

[@sillen3000]

I've got the Husqvarna 330 robotic lawnmower last summer. It's epic!

[@Dumptheclutchevo]

I love my eGo lawn mower. did you get the self propelled one?

[@motonosity]

+evo nah went for the regular one haha. Get that extra cardio in

[@ik04]

I completely understand the thrill of scooters. I had a rescued Vespa 50cc that I brought back to life after it had been sitting in the woods for 20 years... Despite having a Kawasaki triple street rocket, I loved riding that little Vespa...

[@bwheat60]

Next vid is sidecar mount on the Rucknosity for the mower!! Backyard done in 5. Anyway Moto, glad the family Ruckster is fixed. Now get out there tomorrow & lay down some mph! Peace.

[@KawaKouple]

A lawnmower, this was awesome. 😂 you and batteries have no luck.

[@jhnfrank6335]

That back yard has great potential to have a shop specifically for the bikes with a playset in the side for the young one!

[@timecrawler8810]

Still surprise you haven't tried to adjust the carburetor how difficult is that ?

[@Krispykashew]

LOL you really threw the drone up there for that shot.. man you dedicated

[@sergiovega8664]

happy to see you ruck up and running! just started building out my second ruckus, sold my first a couple years ago before our first daughter was born. my wife surprised me this year on Valentine's day. I was wondering, how do you capture your audio while riding. I assume video is with a helmet mount GoPro, but the audio sounds too decent to be coming direct from the GoPro. thanks and congrats on the repair!

[@beejaytee]

Two suggestions: get a bike lift and watch the chain adjustment on the crf. It's likely the chain is too tight which caused the seal to leak. From one Brent to another, love the videos and hope I can make a meet up one day.

[@Borgschulze]

I'll tell you a third time... CA Primer and Loctite 420... E600 does not penetrate Polypropylene plastic. I know because I bought several expoxy products and ended up with CA Primer and Loctite 420, which TORE PIECES OFF when I tried to remove it.

[@rustler08]

Nah, dawg, just use crappy off-the-shelf solutions that are KNOWN to not work for any extended duration.

[@Borgschulze]

I have a tube of E6000, while it worked better than most, it easily pulls off with less than 10% of the force the CA Primer and Locktite 420. Hell the solution I used BARELY made any contact, and it was by far the strongest one. I still didn't trust it though, and ended up drilling and bolting just because I didn't want to worry, and that's more important that looking super clean to me. Lets all wait for the next video where the tail light falls off the CRF.

[@waynemoore7832]

YES!!! The Rukus is back

[@_monkmedia_4229]

Did you ever think of trying a heavy duty Velcro for the crf tail light? Assuming the Velcro holds to both surfaces and the light comes off, just stick it back on and ride on.

[@brknbike]

Thought the same thing, used to be called "grip lock" MUCH stronger than you would think... the more ya know...

[@stamlight4]

but would he still not need to use an adhesive to stick the velcro to the tail?

[@brknbike]

It has its own adhesive, truckers used it to Mount a CB under their dashboard. Radio shack used to sell it, years ago.

[@josephsamsor1698]

I don't know about my other fellow hardcore gas lawn equipment users but I don't like this mower

[@tylersummers5510]

Joseph Samsor I agree

[@calebm.8038]

Joseph Samsor I am with you brother

[@lachiestyles8699]

Joseph Samsor it's so plasticy

[@motonosity]

+Joseph Samsor #triggered

[@dablifenowife4223]

I got a old brigs motor on mine, I got it not working cleaned it and found out it has almost no compressiom she still runs first pull. good old gas motor for ya.

[@jrt2924]

briggs&stratton 75-90's lawnmovers are the best if you manage to kill one with regular usage you are just amazing. we have one 20year ish old and we have only added the oil when needed, sharpened blade and changes sparkplug once or twice

[@guLlygotaGLoCk]

Bro I'm having the same problem! Do you run a ATR harness & if so could you dm me a pic of the stator clip on the harness ? Like you I had removed the clip + didn't mark the correct spotless each wire ! Smh now I've drained 2 1oo$ + lithums.

[@zebra5591]

Love the new build series

[@Cjarvis1136]

awesome dude! I wonder how many people in your neighborhood are like, "look at this dude running up and down all the time... ughh..." certainly not me bc I'd be out joining in the ride but just wondering how many ppl don't know that you have the following you do. keep it man!

[@JayHowi]

lawnmower looks okay but expected run time of 45 minutes for me is a deal breaker, we have a lot of ponds in our garden so we have to work round them and make it look pristine so I think I will stick with petrol lawn movers just a little while longer until they make battery life better

[@mannydcbianco]

You need a full exhaust for that mower. I hear FMF has a good deal on the PowerCore 4 and powerbomb header right now.

[@49BravoMike]

Says stoaked a lot, gets into bmx and wants to start drifting. Looks like some one has been watching their fair share of Adam LZ lol. Great vid bro

[@TheInja]

More lawn mowing please

[@p7ayboy]

Stator, I knew it.. told ya man! Glad you got that fixed. I have the lawnmower model like one down from yours, gotta use an extension but I love it. Off topic, I saw how green your grass was last year. Gunna have to share what you use to fertilize lol.

[@motonosity]

+ᕱᒷᕦ᙭ just a fertilizer at the beginning of the year and lucky weather lol

[@l33tster]

Good shit man, congrats on getting it sorted out!

[@scooterevolution44]

you do know you are burning out your clutch when you start your gy6 on choke and you have to hold the brake, what you should do is start on choke and take it off right away and man handle the iddle until it the engine warms up, anyways just hurts my thoughts seeing you have to squeeze the brake so hard on choke and burning out that clutch

[@COMPUTERSORBUST]

notification squad where yall at

[@thijskennis8757]

love how you use Warp stabilizer to make your areal mowing shot look better +1

[@Steelbluebrick]

How's the BMX coming along?

[@DirtbikeNb]

the all balls kit leaked on my crf. went with oem and no leak. you can pry it out with a blade just don't mess up the seating area

[@ryangorokhav2019]

Im not sure about the idle on the 150cc but I know that my 50cc came idling a little high from the dealership and would move the wheel forward without me throttling and when another dealership did the first service they adjusted the idle screw i think its called on the 50cc and now it idles super low and burbles like a beast but stays on. Maybe look it up for the 150cc?

[@samfletcher3387]

Will that counter seal replacement kit work on a 2005 crf450x? Mine needs replaced.

[@dylanfleming8395]

Sam Fletcher allballs racing makes one to fit your bike, you can go to their website and order one.

[@heathfiedler]

Ok i might have missed a video what did you end up doing to fix your charging issue?

[@pugglepuggle]

like your video's. Do you have any Connecticut plates?And how is the ruckus?

[@brendangomez3547]

Lol I just watched some one cut a lawn on KZbin.... Nice video as always motonosity 😂😂

[@AverageReviewsYT]

Iv used e6000 on a lot of stuff... It doesn't handle vibrations very well... But maybe it will work for you

[@Jarrettc24]

Let me recommend that after you use that electric mower you let the battery cool down before charging to prolong the batterys life

[@righthoekstra]

Good work on your ruckus! Congrats! well thought commercial with the electric lawnmower,, ;) i like the potential of riding on elektricity but the batterys aren't ready yet

[@DunePanda]

Aww man! You didn't run out of gas?! I was kindda looking forward to that!!

[@SargeWadam]

Ego makes really good stuff for being electric.

[@youknowwhoiam1314]

is now a bad time to ask if you have fixed your frickin Speedo on the supermoto?

[@adriansgarage4034]

wow what a cool moped. And the police give a thumbs up??? In Finland they would take it and say its illegal. And u would probably get a big ticket. :/

[@luckyluciano8590]

Hey fam, I'm tryna get back into riding bc I love it and I've been looking to build a supermoto like that, I'm curious what wheels you used on yours bc they look awesome!

[@milanbozicevic3670]

You can try next with fiber resin. I think that's what it's called. It should hold real tight.

[@zachbrigham694]

If you scuff the bottom of the fender and top of light bracket and use plastic weld it's a liquid mix. Also use the clamps that should be the most strong hold.

[@CallsignMiller]

If this adhesive fails aswell for the 450 tail, then use BISON Polymax. Polymax will be better for this because it doesnt get hard after drying, it always will stay a little soft. I.E. the vibrations of the motor will not slowly chip away at the glue.

[@JoeCnNd]

I got the e-go weedeater the lawn mower is next but been thinking about getting the harbor freight one. It's got some good reviews.

[@sjgerbino89]

You should def install an on/off switch to your headlights. It's super simple (autozone and only spent like 15$) ..It will help your battery last longer!

[@piperpilot26]

You should try and take care of that carb issue. Not sure if it's a jetting problem or not, but I'm sure it's a simple fix. :-)

[@nemosaurus]

proud of you papi

[@johnduffy3449]

Come for the motovlog, stay for the lawnmower

[@ItzRevoltz]

Do you need a motorcycle license if you do the gy6 swap?

[@buckrowley1506]

can you use a catalytic converter instead of an exhaust muffler somebody told me the yxz 1000 had a catalytic converter instead oh yeah you need a bigger fatter back tire that's flat like a dragster so you can skid if you have to and taller handle bars so you can sit upright heck maybe even a seat with springs so that you can be more comfortable but does it fit in the back of a standard or rented suv?

[@darraghoneill8233]

Keep up the good work moto

[@RoadUser_Motovlog]

After a few shit days it's nice to have some Third party positivity :D idk what time is it there, but here it's morning so Have a nice day y'all!

[@ExoticOnTheBeat]

What does this have to do with the crf450 build?

[@scottweston9225]

If the CRF plate comes off again, rather than bolt through the tail you could try cutting very thin slits just so you can fit a long zip tie in the first hole then out the other and do it that way. Maybe even use red zipties!!

[@jeajeamystro6356]

motonosity its time for a ATV build

[@xavierq.6658]

5:52 This was at this moment Motonosity knew he fucked up !

[@remiixwheelies8326]

Burnt valve or nah?

[@8bithavok]

last time i was this early i was on life support in an incubator for a few weeks like reckless driving memes on facebook

[@gurrenridin]

So uh... gonna welcome me to Austin by letting me see the Ruckus in person this June when I move there?

[@mineurbiz]

If it does not hold on the plate mount, try 3M panel bond, they use it to hold on body panels on cars.

[@peytonhenderson6197]

Hi motonosity love your vids and your my inspiration😃

[@jdc1978]

I have the same mower. It kicks ass.

[@user-neo71665]

Yeah I have a 62 inch zero turn and it takes me 3 hours to mow. The battery mower is cute but if I had a yard that tiny I would just go old school rotary mower.

[@motonosity]

+dj beard unfortunately those just don't work on the grass here once things really start growing. I've tried. Just doesn't cut it :/

[@cappamura]

I'm surprised you didn't do lunges while mowing for an extra pump =)

[@onthethrottle9230]

Don't forget you need to fix the side stand on the CRF

[@prdoohan]

Check that all balls seal kit. I've had some shitty ones from them for my KTM. The outside diameter of the replacement collar should have a very fine almost polished finish. If it has micro grooves on it then it'll never seal up properly. This is coming from a Precision machinist and Toolmaker for over a decade for what it's worth.

[@noahbossler9722]

He should build a cruiser styled bike for your next build series.

[@xxMINDxBENDERxx]

You need to adjust your fuel mixture screw on your carb, that should fix the idle