The Self-Holding Push Button Explained

[@yuripolkavich7469]

I've seen hundreds of these videos, this is by far the one that I understood the best, because you explained on paper then showed an actual example. Great explanation. Thank you.

[@electreca1]

Your welcome and thanks for watching.

[@allstarstv4467]

Me too thank u so much sir

[@johnfurr8779]

so many videos out there purport to "teach" people to connect to a motor starting contactor yet fail to teach an understanding of the process so that people cannot diagnose when there is an issue. you on the other hand explained just how the circuit latches to remain on so that people actually learn something. Very well done sir

[@tested123]

that really cleared some things up for me. i paused the video and studied the wiring. im an electrician but its rare for me to wire a contactor and control wiring so i like to refresh my memory before hand. thanks.

[@arafatali1327]

Your explanation by the diagram and practical demonstration is SUPER easy to understand. A perfect teacher.

[@electreca1]

Thank you!

[@zazugee]

i found your video really informative, bc you show how it works IRL, unlike those complicated theoretical diagrams

[@danielteyehuago1633]

Exactly

[@JH-zy1dj]

Thank you very much for the break down of the NO / NO maintains the coil. I am getting it.

[@mshoaibijaz]

Very Simple, Step by Step, To the Point, Precise, Accurate presentation. Thanks for your time

[@TusBel]

Great tutorial. You made seemingly difficult connections very simple with easy to follow steps and stages of connection. Thanks

[@teurekat7216]

This is a very good job. Thank you so much for sharing your knowledge. The start-stop logic is the most fundamental circuit in Electrical engineering

[@angeltat2752]

Brilliant explanation of how it works. Thanks man

[@electreca1]

Thanks for watching

[@Ansar-Warakamura]

Good

[@WussahElijah-bb9fo]

I watched a lot of videos but this one is understandable 💯💯💯💯

[@auxtrem]

thank you so much !!!! i did this today , but now thanks to you i understand perfectly !!! wish you all the best!!!

[@scroungasworkshop4663]

Like every one else, thank you so much for explaining this in very simple terms a knucklehead like me can understand. I am building a new control panel for a milling machine and I had everything worked out except for how to use momentary switches for the contactor. I want to use a contactor for safety as I didn’t want the mill to be able to restart on its own if there was a power interruption. Problem solved thanks to you. Cheers Stuart 🇦🇺

[@electreca1]

You're very welcome!

[@andyvarley5469]

Extremely well presented, thank you for making it easy to understand.

[@electreca1]

Glad it was helpful!

[@sunaryosupaat3163]

👍 Thanks a lot for your Vidio I am as a biginner can easily understood what you have submitted in simple methode, hoping you doing more vidios may God bless you n your family !

[@joeldwarika8356]

You are brilliant David. 👏. GOD bless you.thank u

[@__n_lupan__5333]

Thank you a lot. Slow and step by step explenation. Just like it should be.

[@electreca1]

Glad you liked it! and thanks for watching

[@stuartdixon747]

I have been looking on the Internet for ages to understand how to wire up stop start in this way. Thank you for such an excellent presentation. I get it now!

[@electreca1]

Glad it helped!

[@danielteyehuago1633]

You have given me the best explanation on this, but can you remake this video and add two indicators to it, one when the contactor is energized and the other when it is not. Also includes emergency Push button.

[@motionsick]

Bro I've been wanting to learn this for years, finally!!!!!

[@joshconatser-wx7ri]

Have struggled with this concept, but you broke it down perfectly and simplistically. Thank you!!

[@rashidmuyingo8182]

Your a good teacher unfortunately I have just seen this I wish I saw it wen I was in school plizz upload more am going for an interview

[@ongomsamuel3390]

Let me pray for you bro anyway I wish you success 🙏🙏🙏

[@ongomsamuel3390]

Let me pray for you bro anyway I wish you success 🙏🙏🙏

[@ongomsamuel3390]

Where are you located now ? Are you in Uganda

[@josephmandes4764]

Such a good video! Like other people said, explaining it on paper and then demonstrating was so helpful. I’ve watched other videos, but I didn’t get it until I watched yours!

[@electreca1]

You're so welcome!

[@philcavanagh6928]

Great video! Do you happen to have a video that demonstrates the stop/start functionality where the coil (24V) is a different voltage than the line voltage?

[@silentstorm77]

Thank you so much!!!!!!! I was stuck on this issue on a job for hours

[@electreca1]

Glad I could help!

[@philipchamp594]

Thank you! I got my 10 HP 3 Phase dust collector wired up with the help of this video. We have start stop switches at 4 locations in my shop.

[@ongomsamuel3390]

It's really interesting and educative and i really like it . Thank you for your lecture

[@Risan-tb1zv]

Thanks you Very much ........I understood perfectly.I am from Bangladesh.

[@KI-tm8jg]

Thanks alot! Most easy to understand video I've seen!

[@electreca1]

Your most welcome

[@gorgonwraith]

thank you for this explanation, it was great! definitely helped me understand the material i've been studying a bit better.

[@electreca1]

Thanks for watching

[@tonyslice7279]

very easy and not at all complex, Thank you my Brother 👍🏼

[@electreca1]

Thanks for watching

[@danielteyehuago1633]

God bless you for making a great video for us

[@KavitaPatil-yc8ox]

Very nice this your explanation & fine demo thanks for your explanation

[@matthewudebuani5166]

Well demonstrated, quite understood. Very helpful

[@electreca1]

Glad it was helpful! and Thanks for watching.

[@penzolentertainment642]

The best explainer ever

[@8joh58]

That’s pretty simple. Ty sir ❤️

[@muhammadsajjadarshad1631]

Excellent video on this topic.

[@saxson-senior2981]

You are good teacher and that is why l follow ever video you upload

[@miraxandrax969]

Made my day .at last I've got the right channel

[@electreca1]

Thank you

[@AJ-ch6kg]

Very grateful for your knowledge and delivery skills. Thankyou.

[@jollyscaria1922]

Welcomed

[@hajimuhammad2928]

Thank You Very Much, Sir. Kind Regards From, Karachi, Pakistan.

[@electreca1]

Thanks for watching

[@mauricegasongo1053]

hello there, hope you are doing well? you really a good teacher!! will you please teach us how to read electrical circuit with contactor?

[@johne.skaggs3793]

Good Job.. 25 years ago this was the part that took a few days to know how. Rest of the wiring is common sense. Also You May explain to these rookies about the Neutral conductor going through the OL contacts. Thanks Sir.

[@kwekusolo1679]

Very simple and easily understandable

[@lesterabram5546]

You did awesome job. Thanks a million.

[@jamaicanlifestyle1586]

Thank you so much for taking the time to do this tutorial, it really helped me to get a better understanding.

[@areshudson4508]

you probably dont give a shit but does someone know of a method to log back into an Instagram account?? I stupidly forgot my password. I would love any tricks you can offer me!

[@immanuelbrysen5962]

@Ares Hudson Instablaster =)

[@areshudson4508]

@Immanuel Brysen i really appreciate your reply. I found the site through google and I'm trying it out now. Seems to take a while so I will reply here later with my results.

[@areshudson4508]

@Immanuel Brysen it worked and I actually got access to my account again. Im so happy:D Thank you so much, you really help me out !

[@immanuelbrysen5962]

@Ares Hudson glad I could help =)

[@adekunleadeleke9442]

Bravo. Simple enough

[@levramjeddou]

Excellent demonstration

[@nilushamaduranga4616]

Thank you ❤

[@mahmoudm451]

Thank you for sharing your valuable knowledge!

[@markthomas3858]

Thank you for taking the time to upload your teaching video.

[@bosuglosalifulongi6406]

Very clear explanation, thanks

[@jansenspanzu4083]

Hello sir, how r u doing? You are doing a great job of teaching the people... but my suggestion is that you should organize a board which you can be writing some diagrams (projects)

[@Chaudhary-concrete]

Your video is so informative when I get in trouble search on KZbin mostly issues solved by herself

[@rajapakshan9950]

Thanks sri...

[@briannyagechi7643]

Amazing Mwalimu✊🏽✊🏽

[@weekends3228]

This is what I was scearching for sir Thanks

[@goldfish5606]

thank you, keep up the great videos. So cool,calm,collected

[@electreca1]

Thanks for watching!

[@gordonkatwaroo3479]

This guy made this very simple to understand👍

[@tc.syedhabib9034]

Thanks so much for the straight forward explaination! Thank you for your time.

[@moromagstv6295]

Wow friend very clear explain thank you for sharing hope you see you around

[@40Sagi]

Thank you it was very helpful

[@seedsofhope8100]

Thank you so much for this video

[@cncsandingtools]

Very nice work. Clear and precise thank you

[@electreca1]

Thank you for watching.

[@ekehtimothy5627]

You are the best

[@electreca1]

Thanks you

[@tainopr7059]

Great detailed explanation thank you

[@mabosamra]

best explanation thank you

[@muhammadwaheed9414]

Very nice good for new learners

[@wajidyoutuber4555]

Very beautiful and nice video

[@joshsundiwa]

simple and straight forward thx man

[@ajkochera7682]

thanks that was perfect I under stand now.. now only if you could ad an overload protection to that with an e-stop. added that would be awesome . im not sure what it is but the way you did the video it makes it plane and simple and easy to under stand. ill have to look maybe you already have a video of this.

[@electreca1]

Thanks for watching and appreciating..kzbin.info/www/bejne/opfGiaOKpdGHkK8 this will show how integrated an overload to the contactor in DOL starter circuit. it also has another part here kzbin.info/www/bejne/Y2rQh2aOhL9lfqM... I will make one in feature adding Emergency stop.

[@RonaldMuindi]

Wonderful !!circuit,

[@mrmhaizy]

Brilliant video!!

[@ivesinned1343]

very good video thank you

[@electreca1]

Thanks for watching

[@MyWaypointsDotPH]

your explanation is the best I had so far. do you have video on wiring with overload? thanks

[@electreca1]

Thanks for watching...........kzbin.info/www/bejne/pIO4kJmbrrmDqdE this video is manly on star delta starter but still shows how to connect an overload relay.

[@xHYAENAx]

Thanks men

[@electreca1]

Your welcome

[@christinethornton8969]

What would happen if I used a standard ON-OFF toggle switch on this self-holding circuit? Would that be safe? I am trying to replace my coffee machine momentary switch with a toggle switch. The coffee machine has a self-holding circuit. Thank you

[@ePointScribes]

Well elaborated!

[@mbuthianjoroge9434]

Well explained bro. Uko juu sana

[@robertbishop9283]

Very helpful, thank you 👍

[@electreca1]

Glad it was helpful!

[@gabrielgabby2718]

GOD bless you for taking your time to teach ,i am really greatfull of it

[@electreca1]

Glad to hear that

[@laminjallow153]

Good explanation

[@נתנאלמרזוק]

Thanks for the video it teaches thanks! I work in industry and this is a very necessary thing, but in the video at minute 6:30 I could not understand why you connected A1 to L1?

[@rebokahawaki6591]

Kind sir Thank you very much for the amazing explanation

[@manovickram9176]

Awesome 👌

[@gurpreetsaini5148]

Very well Explained in simple steps. Good 1

[@electreca1]

Thank you 🙂

[@mobilestudio3694]

Thank you very much sir

[@electreca1]

Most welcome

[@timothymihigo4460]

Good explanation I appreciate your work from TANZANIA

[@electreca1]

Thanks and welcome

[@tieminiesynclaremanbiewoh5395]

Interesting technology

[@camerontorres4149]

Very helpful video. Do you have more videos breaking down relays ?

[@electreca1]

Hope these can help kzbin.info/www/bejne/kIqWlHiFm5V9rLs kzbin.info/www/bejne/m4qqXoiGpNeEjrM Thanks for watching.

[@anaime1129]

Excellent

[@kcee432]

Good day sir, I really appreciate the good wor you're doing, I have a question, the red wire is supposedly the life wire (24v), but you passed it through the stop button first and looped to the green button, which means the green button got it's supply by looping from the red button, does it mean the red button is continuous even though it's not pushed ??

[@manveersingh5087]

You explained batter then anyone. Next video you can explain same work with three phase

[@convinemukidanyi864]

Thank you for this awesome explanation 🙏

[@mauricekabwe3294]

This is nice

[@nivendarsoo4575]

Man you are amazing love this video very simple and understanding please upload more vidoes

[@electreca1]

Thank you, I will

[@blakebennett9904]

Thankyou very much, I understand now

[@mxtthompson]

thanks!

[@manovickram9176]

I want like this vsd vfd wiring working principle video

[@mirekchlodzinski764]

Great videos! Is it possible to wire 8 pin relay with 12v coil with push buttons.

[@electreca1]

Yes, its very much possible, take look at this video kzbin.info/www/bejne/r2isamekrpJ7epI the only deference is I used 11pin relay ac.