The Truth About The Milestar Patagonia MT.

[@DirtLifestyle]

Hey folks! I want to add some context in the interest of clarity. As far as big offroad tires are concerned, these are what I've used in the past. 39" irocs, 40" pro comp MT2s, 40" maxxis razrs, 39" BFG red labels, 39" bfg KM3s, 37" bfg KM3s, 39" KO2s and these 38" Milestar Patagonias. Most of the other tires I have ran were 36" and smaller, like my super swamper boggers, TSLs, wild county's, kumos ATs, Procomp ATs, and a couple sets of good year ats. I even ran the original BFG mt for a year in 2006 and a couple other no name MTs before that. My thoughts on these Milestars are flavored by my experience with these multiple brands and like you, I ran many of these for years. The only blow outs I had in the last 18 or so years of wheeling was the TSLs and these Patagonia Black labels. I treat all these tires with the same amount of abuse and run low tire pressure on everything. But these reviews don't come from a place of thinking I'm an expert. I get asked questions about my tires everyday so I'm simply sharing my honest experience to answer some of your questions. I hope you enjoy these videos! Tires are definitely one of the most important parts of an offroad rig so choose wisely and do lots of research!

[@christopherhowell2050]

You have a good run with tires but I’d like to know your thoughts on the TOYO mud terrain tires.

[@thechrismbify]

non black label 35s, blew a hole in a sidewall. guess I touched a rock under the mud spinning the tire at a whopping 15 mph. the sidewall is mind blowing thin. I’m not worried about it in the rocks, it’s when you need the wheel speed in the mud if it touches anything it’s game over. I’m very interested to try the mt 02 and see if it holds up.

[@DrHavok1]

def the tire I can't wait to get ahold of myself is the Maxxis trepador one of these days I will own either a 37 or 40 in them and I can't get enough of seeing people use them and want to know more about them. I don't live in WA anymore I live in Missouri about 40 minutes away from flat nasty orv park so I will have plenty of wheeling opportunities coming up after I finish my zj build

[@davidanderson3999]

I have ran tel 42” swampers probably my favorite tire on 79 Ramcharger, just swapped out my Patagonia for At. , no bead lockers for me, to be fair the Patagonia were not 15” wide like my swamper were, but like swampers both are loud on highway,

[@johnmcwade222]

We use Pro Comp Xtreme M/T, currently 35” and it is a amazing tire in all conditions, mud, snow, sand, rock, dirt, highway. We use them all year around here in Ontario, Canada. We have 38,000 kms on them with no issues, also the wear on them, they still look new. Would like to see your review on them.

[@JohnDoe-ud2cc]

The selling point of these tires was the price. They used to be great performing tires at a cheap price. Fast forward to 2022 and now they are the same price or more than name brand tires like BFG. My next set of tires coming up will not be Patagonias again. 3 years ago my Patagonia’s were like $800 for a set of 37s, now they are like $1800. So at that price my next set of tires will probably be BFG or cooper.

[@timking2194]

I agree they lost there price advantage for a tire that only gets 25,000 miles

[@Firebird-ru7je]

@@timking2194 my buddy bought a set of 31s for his yota for 500 2 years ago, went to go get a new set- 1400, so he spent the extra 600 and got some 37"mts and rims

[@fordracing19]

Same. I've had 35s, 38s, and just jumped to a 42 and went Nitto.

[@vanillagorilla911]

I also purchased the Pats for the price. I got five 35s for $900. I'll be replacing them soon, and an identical set will cost me nearly $1500. Add another hundred or two and I'll have BFGs that will last far longer that the 20-25k I will get with these. No reason to use the Pats at their current price point.

[@051Jerrett]

This was going to be my same comment... i bought these back when they first came out, and they did great! I wasn't doing a lot of off-roading at the time but was traveling for my job in the Pacific Northwest in a lot of snow and rain. Also, pulling a travel trailer from job locations. I had no complaints. 35's on a ram 2500 cummins. I also ran a set of maxxis M/T and hated them!!! Very expensive and sucked! Now I have a 2022 f150 tremor with factory raptor beadlocks and ko2's that came as a set. I'd like to give the Patty's another go, but with the price I'll probably just get km3's

[@daveisnothere]

It is so nice to actually see a YT'er that has tires bulging from properly being aired down. Wheels are only a little too narrow for that size tire, which I'll explain below. As a near 20 year tire industry vet and having 40 years of off-roading, I have not been impressed with these tires just from what I've seen on YT videos. I've seen some 'user errors' as well which contribute to some of the problems with tires but mostly the Pats dont impress me. Most of my viewing was Matt's Offroad Recovery, but have seen others running them as well. First thought when you were sticking your hand in the sidewall cut was OMG, that sidewall is weak. I looked them up and the Black Label's are 6 or 8 ply and they have 3 ply sidewalls. Well, one thing I used to tell people when BFG first came out with 3-ply sidewalls back in the day, "Those 3 plies are way thinner individually than the 2 plies on other brands, if not the tire would ride really rough, it still needs to flex". That may be the case here, esp since you could bend that sidewall with your hands so easily. MIchelin has had thin sidewalls for as long as I can remember, they are also 2 ply like the other brands, but not as thick. Now if you were able to rip that sidewall with that little air, I would say there is an issue with the construction of the sidewalls. I've literally rubbed my sidewalls on 33x12-50 Wild Country's on so many rocks, some pretty sharp and never cut a sidewall. But at 3-4 psi the sidewall just moves out of the way. One little known fact I've been preaching for more than 30 years and almost no one has known, and almost as many get argumentative about is the relationship between tire width and wheel width. The reason people get argumentative is the tire manufacturers misinform people in their specs on pretty much every offroad tire made. I looked up the Black Label's and their 13.50 width tires, they say can be mounted on 8.5 to 11 inch wide wheels. This is where they are setting people up for poor handling and premature/irregular wear. The general rule of thumb is you take the section width of the tire, subtract 2.5 and that is how wide of a wheel the optimal size is for that tire. Example, 10.50's live happiest on an 8 inch wheel, 13.50's should be put on an 11 inch wheel. This also works out to tread width=wheel width if you cant do math. So if you have that 13.50 tire on an 8 or 10 inch wide wheel, you are shooting yourself in the foot. There are many things that happen if you run a tire on a wheel that is too narrow. First, the handing is not going to be as good due to the cross section of the tire. Traction and wear will be sub-par due to the tread tending to "dome".. not be flat across like radial tires are designed to be (Look at tires on a Corvette). Air pressure will need to be artificially low to counter the warped tread-face which will effect handing even more. I was about to give Matt a hard time about not airing down because his tires never really bulge out like they should while aired down, another symptom of improper wheel width, the tire is stressed to the point the sidewalls cant flex like they should, this can also contribute to sidewall punctures due to the sidewall being taut. On the other hand a wheel that is too wide can cause irregular wear and means you need to run the air pressure artificially high so the center of the tread will make full pressure contact with the road. Traction then suffers due to a smaller contact patch front to rear on the tread. Even after showing people solid proof of this I still got a lot of people saying, "Well BFG says I can run this 33x12.50 on an 8" wheel". Personally, I believe BFG just wanted people to buy their tires and if they had to replace them early, oh well.. more profit.

[@dunnoyolo2238]

Have had 2 sets of Milestar Patagonia MT's on 2 Diesel Trucks and have been great . Now i will try the Milestar XT on a 4 Runner

[@mikemorgan4670]

Informative video. I am partial to BFG myself, never had an issue with them. Hope you are feeling better Nate. Good to have you back!

[@demented_cycles]

I had them on my daily driver 2010 Avalanche. They were 285/70/17s with e load rating. I used my truck for work while I was a utility locator for a pipeline company around Houston so I was off-road literally everyday. I never had sidewall issues but my two complaints would be tread life and mud traction. I went through a set of tires every 12-18 months and had much better luck with my Toyo Open Country MTs, although they were twice the price

[@cobra12398]

......So the question would be with them , as a daily driver, ...."is what type of yearly (annual") mileage were you getting" ? I ask because out west, 'heat checking' is a real problem Ran BFG AT's and never got more than 45,000 due to sidewall cracking. This made them to unsafe for highway use. The tread was getting marginal, but they did last about 3 years a set. As a price point, if I can get 25,000 out of a set, them i think i am ahead.

[@warrzone910]

I have a set of 285/70/17 that I originally put on my sequoia for a month long road trip from NC all the way to CA so they seen some pretty different conditions along the way. Half of the trip was mainly on the highway, the other half was spent in dry desert conditions to snow covered mountain ranges. All of this was done pulling a 7,000lb trailer most of the time so of course I got stuck and had to be pulled out of different situations but this wasn’t due to the performance of the tires but more or less that I was pulling a heavy trailer off the beating path lol. When I got back home I threw them on my Rebel that I use strictly for landscaping work and pulling trailer to see how they would hold up. Needless to say, the tread life has been horrible but again I am using them outside of their intended purpose.

[@demented_cycles]

@@cobra12398 sorry for the late reply. I think I got 25-30k miles out of the set

[@egx3713]

As much as people may hate on the bfg ko2s or km3s, those sidewalls are crazy tough. I would recommend those tires!

[@1uniqueguy]

I had Milestar Patagonia M/T 35’s for two years no issues. Now I have a set of 38’s for about 6 months. They have preformed great. My rig is only used for wheeling and I wheel pretty hard. But the tires do get some gnarly chunks taken out of them pretty easily. But it hasn’t caused any sidewall issues thus far.

[@TheJrzy2111]

I’m on my 3rd set! The new 35x12.5x20 m/t are now M/t 2.0 . Best freaking tire on the market. Love them on my mega cab 2500! 17 months of Highway use 65,789 miles on my last set!

[@jumpersclerk9705]

Do a review on the cooper SST pros. They are also a lighter tire. I always worry about the sidewalls on lighter tires, but I love to keep the weight off of my rig too.

[@justingalvan4050]

My favorite MT so far. I work in the tire industry and have the chance to try out different tires and they tend to be lighter than everything else like you said and for how aggressive they are they actually drive great and grabbed everything for me in different vehicles for different terrain.

[@BigBluePile]

@@justingalvan4050 that's good to hear! I'm switching to these since the GY MTRs I was running are trash now and still have half their tread still!

[@DirtLifestyle]

These are definitely on the list! Hopefully I can get my hands on a set 👍

[@justingalvan4050]

@@DirtLifestyle let me know if you need any help with that 👍🏽

[@quintili1]

I've had two sets of their regular mud terrains with no issues at all. That's interesting to hear the issues with the black labels. I would love to see you test out some MT Baja Boss Mt's, I think those will be my next tire.

[@rlaracue]

I have the Baja Boss MTs in 37x12.5x17. Love them so far. Great off-road and the on-road noise is fine. 34 PSI seems to be a sweet spot in terms of pressure. Even 32 psi if you want a smooth ride on the road and over highway seams. All that said I would like to see a review of them going through lots of different terrain.

[@Thexkidd]

I’m just about to put a set on.

[@robbennett]

I have the mtbb AT and love them

[@michaelwebb8788]

I run the MT MTz in 35x12.5 and I love them as well. I have done snow, mud, sand and rock with them and am almost embarrassed to admit I have never aired them down. They did great at full pressure.

[@surfstarcc1]

Big fan of Mickey Thompson rubbers!! Currently running a set of 37/13.5/r22 Baja ATZs and they are by far my new favorite tire. I've run most of them, Toyo, BFG, Nitto, maxxis...

[@JonnyDIY]

Nice review, thank you for being honest. Theyre a good budget tire, I think they need to come up a little more to play with the big names.

[@TreeLovinAdventures]

We run Patagonias and they have been an amazing snowtire. Before we bought them we heard a lot of bad snow reviews but after running them for 2 winters, they are by far our favorite snowtire for deep West snow. We got down to 2 psi with no beadlocks a few weeks ago. Zero issues, and our little 35s had to drive around and pull out a truggy on 40s with swampers.

[@Central_CoastRotors]

Glad to see you back making vids Nate....definitely one of the best channels on KZbin....!

[@jasonwernli422]

I am on the pit crew for a 4800 Ultra4 KOH car. We run these in 37". We have had 1 flat in 3 years of racing KOH. I guess any tire can have issues, but KOH is brutal, and we have had great success!

[@MrRmga420]

I have a set of 5 Milestar Patagonias on my 2011 Lexus GX 460. It’s a full time four wheel drive SUV. I love these tires for what I use them for. I’ve had them in a little bit of snow, some mud, and allot of rocks, dirt, and sand. This is my wife’s daily driver. These tires give me confidence for my family to get where they need to go no matter the road surface. I have noticed as the miles rack up, they’ve gotten a little louder on the Highway. I also have some of the sidewall lugs that have chunked off from off-roading. But overall these are a solid tire. I also do 5 tire rotations every 10k miles to keep them wearing evenly.

[@nicholassbardella6045]

I love to see a long term review of the bead grip wheels too. Is it more of a marketing gimmick or does it really help when aired down. I want the advantages of a beadlock when aired down but don’t want all the hassle of the mounting and dismounting.

[@davethrasher4124]

I bought a set, haven't been able to get them on yet (waiting on the lift, damn delays). However the shop that mounted them said they were a bit more difficult to mount than regular wheels, so take that for what it's worth.

[@billwaterhouse5894]

Yes, me as well...gimmick or greatness.

[@LBCR6]

I have the same bead grip wheels for 2 years now and have been down to 8psi. Never had a bead break loose or even burp air.

[@peachpole]

I have the same set as Nate on my jeep. I run 8psi every ride with 37” KM3s and have had zero issues. I also have bead grips on my RZR and run them at 7psi in the dunes no problem. The tire shop had a hell of a time mounting the rzr tires though. I think that was their first experience with the bead grips.

[@daveisnothere]

Just to paly 'Devils Advocate'.. 40 years off road, running as low as 2 psi, never owned beadlock wheels, never will... Only once, and it was more my fault than the tire's/wheel's fault due to a heavy pedal and steering being applied I got sand in the bead. Never have had one come off, and I've done a lot of the trails in CO and UT. Typically the beadlock on modern wheels is pretty good at keeping the tire on. Now if you like to drift with all the ponies engaged, beadlocks may be worth it. Drive like grandpa on a sunday drive, I think they are a waste of money.

[@maccook1692]

I've had my non black labels down to 7psi on snow/ice and I could creep down a slope that everyone else slid down. So I'm a big believer of these in the snow!

[@proeagleoffroad]

We have Milestar tires on two UTVs, Jeep JK, Bronco and a 4400 race truck. We’ve raced KOH twice, numerous BITD races, Moab and more and have never had a single issue. I cut across the desert in Baja and earned a well deserved sidewalk puncture from a cactus in the Jeep. In 5+ years that has been the only puncture or issue of any kind. I appreciate your honest review.

[@ft4dt]

Hey Y'all - I've been wheeling in the southwest, I live in AZ, for just over 20 years. Many different vehicles over all those years. Suzuki Samurai, Hummer H3, Jeep XJ, Jeep JKU and now a Jeep JLU Rubicon Diesel. Over all those years, many different brands of tires. Mickey Thompson, Pro Comp, Goodyear, Generic Budget selection and Patagonia's. Many different sizes, from 33, 35, 37 and now 40. Over all that time I've never had a sidewall blowout until the Patagonia's. Mine were the standard variety MT01. After nearly 10 months of trail use a couple times each month, my first sidewall ripped wide open. It was replaced under road hazard warranty. However; over the next month I had two more rip open just the same. I do air down to 12 psi each time I hit the trail. So it isn't just the Black Label that had the issue. And I'm sure it isn't going to affect everyone. The trails of the southwest are quite rocky with many sharp edges just waiting to jump out and grab at your tires. I've since went back to Pro Comp Xtreme M/T 2 (2nd favorite tire) as the Mickey Thompson Baja Boss wasn't available at the time in the 40's I wanted. Many months into these tires on many AZ trails and the sidewall aren't showing any signs of damage from the trail. The Patagonia's looked exactly like the rock had been ripping at them. I loved the Patagonia's for all the reasons everyone else loves them. They had always gripped great and the on road ride was incredible as well. And at the time, the price was super low. I'll be spending just a bit more moving forward on either Mickey Thompsons or Pro Comps. Weak sidewalls are not an option here. Good luck with the replacements! -Greg

[@swampdonkeyoffgrid190]

Running d rated standard pats for three years, have a solid year and a half offroad on the sharp rocks of arizona, no beadlocks, 15PSI, zero issues. Love the tires on and off road. Like most would love to be able to get more miles out of them but understand the trade off.

[@cofcortez]

I bought my '16 Rubi JKU about a yr and half, the Milestar Patagonia MTs were on and I was very surprised and shocked at how well they are performing. I've been in the deserts of southern NV many times in the last yr or so and they perform great, sometimes I don't air down, that's scary, but they still do well. But when they are aired down, I feel perfectly comfortable and they perform marvelously! Keep up the good work.

[@mitchellanderson7369]

Unique experience from me, I had the 35 Patagonia mudder on my rig for about 18 months, using it as my daily and wheeling it hard on the weekends. I then deployed to iraq for 7 months, and came back. Continued to use them the same way, but got a tear in the side wall 2 or 3 trips into getting back, got a hole big enough to put a couple fingers into right on the tread face, and got bubbles happening all over the side of another 2 tires. With 4 of my 5 out of commission, I moved to the km3, and have loved those since.

[@jonathanconaway9487]

I’m on my 2nd set of M/T 01s on my TJ (only 35s) and love them. Handled great in the snow and rocks of NW Colorado, handle great on the highway (though wear is a real issue but they are MTs so that’s par for course) and overall all around great tires. I have a buddy with a JT and he doesn’t like them on Snow but also like you said didn’t air down, I’ll stay with them as they are the best bang for the buck and over delivery for their price IMO.

[@ajr5195]

Not tire related.. but your taco is THE COOLEST taco ive ever seen. You did a great job with this build. Keep up the excellent content.

[@DirtLifestyle]

Thanks man 🙌 I appreciate the kind words!

[@dannyswayze2133]

Damnit I love your Taco. I like your review on the snow performance. Snow is where it's at! Especially when you're in the great white north.

[@truaxoffroad]

I have had two sets of patagonias. Wheeling in AZ I never cut a side wall, but I the chunking was really bad and this year at EJS I somehow ripped an entire tread block off the tire.

[@travispinkerton9916]

I’ve seen that happen before on milestars. IMO I’d rather run mickeys coopers or even nitto and I’m not a nitto fan for other reasons😂

[@waggy401]

@@travispinkerton9916 I have Mickey Thompsons and they are shredded for several reasons. Even have chunks of sidewall missing. But, as long as they still hold air it's all good!

[@AGTFBS]

love my patagonia MT 37s on my JKU, on road and off-road balance is awesome - no issues

[@anthonygendron9737]

On my Gladiator I started out with 37” Toyo Open Country MT’s and they are amazing but really heavy. So heavy that a bought 37” Patagonia’s MT’s and they are so much lighter that I kept them on till they wore out and have done well on all surfaces. The only issues is they only last about 25,000 miles. Now I have the 37” Patagonia A/T for daily use and switch back to the Toyo for off-road use.

[@mattbrew11]

How are the patagonia ATs in rain? How they wearing so far? I run 39” KM3s on my DJT with sport fenders & 4” rustys lift as much as I love them if I can get away with a 37 AT without it looking too tiny and save the expensive tires for off road trips its probably smart financially

[@JCPaintGuy]

@@mattbrew11 I ran through two sets of Patagonia A/T’s and got 65,000+ out of each set. They did amazing in the rain and the little bit of snow we get here in Middle Tennessee each winter. I wouldn’t hesitate to buy them again for any truck or SUV.

[@anthonygendron9737]

So far the A/T’s are great in the rain and snow. They are much lighter and super quiet. The only down side is they look a little funny with my 4” lift in a 37”. The fuel savings is worth it in the end.

[@ajfarson]

I have run Patagonia M/T tires on my Bronco (33x12.5x15) for three years and absolutely love them. I wheel in snow, mud, sand, and in the rocks around Reno/Tahoe and the Eastern Sierras. They have never let me down. The M/T tires impressed me enough to purchase a set of their A/T R all-terrain tires (315/75 R17) on my daily driver/tow rig. These are not all-season tires, and the performance in road snow or even heavy rain is not impressive but workable as long as you are mindful of their limitations and weaknesses. I regularly run them at 7-9 PSI without beadlocks. I inherited a set of Patagonia M/T tires (315/75 R16) on my 80 Series Land Cruiser in March of 2021. The PO had taken the 80 from Vegas to Cabo and all around Baja, then back to Vegas. He also took the 80 to Imogene Pass and around the Rockies on the same tires. So these were well used by the time I got them. With only about 35% tread life remaining, road handling characteristics became unpredictable, and road noise was noticeably worse. This should be expected for a soft compound M/T tire, so no surprises there. All and all, I am a massive fan of the brand and especially of the M/T. I have not used the Black Labels or the G2 version yet, so I have no opinions on the subject.

[@OVRLNDX]

The four Jeeps at home run Patagonia's I haven't had a problem with them honestly! I run XT's on the 392 and I love them. I'm running the M/T02's on the JK and so far I'm loving them! The Mt'S 01 Liked to be rotated because of its soft compound and I will run them at 38PSI on the road. Other than that I'm very happy with Milestar tires, I guess its a whole different experience for everyone. I cant wait to do more testing on the MT02's. Awesome video buddy!

[@advapp]

I've never ran them but all my friends have because of the price. They've had the regular and the black labels and have had blowouts on the side and in one trip we had multiple blowouts on fairly new tires. They will never run those tires ever again. I was on the Rubicon with a brand new set on my vehicle and passed a guy who just put on a brand new set and had a sidewall go out on a 40. I had a pair of Nittos 40s that had 30% tread life left and if you look at them they're sliced and diced chunks missing never had one leak never had one blow out. I've also ran Coopers, BFGs and never had these issues. I think it all comes down to this- there's only so much rubber and technology you can put in that price point. One thing I will say is they are excellent in the snow because they fold over so easy you can run crazy low pressures however I would never run them I want to be able to rely on my tires not have to worry all the time about cutting a sidewall or having extreme blowout on the freeway.

[@1JayZed]

I have a set of regular 37" MT01s on my Rubicon. Been very happy with them. My 3 favorite features are 1, light weight. 2, good sidewall flex even at 35 psi. I often don't air down because they not super stiff like Toyo. 3, road manners. Quiet, handle well etc. They do seem to be wearing fast, but so far 0 complaints. I'll probably step up to a 38 next.

[@steveforgues72]

I’ve got about 38000 miles so far on my set of Pats. They have been great on and off-road. My only minor gripe is on road. Because of the small contract patch, they tend to break loose a little on the heat applied road lines, especially when wet. Other than that, I love them. Will be replacing in the coming months before my wife and I go on a 6000+ mile cross country road trip. I’ll be going with another set of Pats.

[@atom31b]

Thank you for your honest opinion. Too many bought "reviews" on KZbin. When I go up to 35s I am getting a set of these, mainly because the price is right.

[@ryanmontague7937]

I would like to see you put on a set of the new Mickey Thompson Baja Boss AT's and see how they stack up against the KO2's

[@monteclampett7862]

I've been running The Milestar Patagonia MTs for about 3 years and I've been completely satisfied. I run them in the snow, mud, rocks and highway and have had absolutely no issues. I have them on an 06 TJ Rubicon.

[@TimRoyalPastortim]

I have minor chunking issues on mine, but overall I'm very satisfied with mine. No puncture issues.

[@Escape.Idiocracy]

What PSI are you running and how much wheel speed in the rocks? I had chunking only when not aired down enough and too much wheel spin up shale.

[@rubicon4wheeler]

I really appreciate the HONEST tire review. I ran the 38x13.50R17 Patagonia MTs on my JKUR since they first came out, and I was nothing but pleased with their performance. I was abusive to the sidewalls and never had any issues. With my new JTRD build, I decided to try another tire that's attracted me since I first saw it, the 37x12.50R17 Yokohama Geolandar MT G003. It drives very nicely on road, although it's much louder than the Patagonias despite Yokohama's claim that it's so much quieter than most MTs. I haven't had a chance to drive them offroad yet, but there are so few reviews of these tires out there, perhaps it's one you'd like to consider trying out. At any rate, keep up the good work!

[@obrianmcc]

Your reviews are always fair and objective. I'm running my first set of Milestar Pats (standard, not Black Label) and so far I'm really liking them. Unless they prove unreliable I would purchase again.

[@davecamilleri9411]

I have been selling tires for over 35 years and wheeling them. I have not had the opportunity to sell or wheel a set of Patagonia M/T's so I won't give praise or anything negative about them. Other than that, there aren't a lot of tires that I haven't run and on my 97 TJ I run Mickey Thompson MTZ's and they have proven to be a very good tire for me. Now, I am old school and only running 35's, but with 15 inch wheels I am limited. Mud performance and snow performance are my main interests and the MTZ's excel. I liked your comment on different snow conditions, I am in Northern Wyoming and our winter snow is super dry and like sugar and very tough to get on top of. Sometimes the only solution is chains on all 4 and other times 3-4 psi will get it done. I also run tracks on an atv in the winter and when the snow it super dry I have buried the atv and spent a bit of time shoveling out. Keep up the good work.

[@RyanBennett_Gpd605]

I loved mine but you have to stay on top of rotations more regularly than usual. I do wish the rubber was slightly harder for road longevity but off road performance was amazing!

[@jdsrcs8061]

The Pat's have been great for me. I run the 295/17s on my ram and 265/16s on my wife's XJ. We wheeled and road tripped and have worked in all situations. I will buy them again with out hesitation.

[@danbrown4205]

I have 37x12.5R17 MT01 standard, not black label and have never had an issue with the sidewalls. I’ve even scraped so hard against a rock I gouged my rim and tore the valve stem off, but the tire only had a slight scuff. Love the overall performance of the tires. The only negative is that they are getting a bit noisy on the road as they wear down (could be an audio cue saying “buy new tires!”). Great review btw.

[@MichaelBEarl]

I run Patagonia's on a 2008 Wrangler Unlimited. I have the 38.5" 01 series (not black label). I have had them for about 4 years. I live in New England and they have been run on the highway, through 30" mud, through shallow rivers, up rocks, through deep snow, and in normal driving conditions. They have performed excellent. No issues with wear, they are pretty quiet when aired up properly, the grip great when running low pressure. I run mine over sharp sticks and rocks regularly and have not had any issues. I have some lugs broken on the edges of the tread from gripping rocks, but that's abuse from me. One thing to note that I found when buying them was the weight of the tire. These were several pounds lighter than any decent tire of the same size when I bought them. Rotating weight can make a big difference and I wanted a lighter tire and wheel combination to make it easier to change when necessary.

[@jaredyoung6519]

I had bought these tires in a 37/13.50/20 for my 2015 Sierra just because I’ve heard of the sniper performance and they handle like a dream on the highway very low noise never had any issues at all got about 43,000 miles out of them! So I bought a set for my daughters ZJ and 31 1050 She Drives mostly highway and wheels on the weekends and so far you can’t even tell if they’re wearing! My my daughter even hit a pothole the size of her jeep at 35 miles an hour didn’t hurt the tires at all but it ripped a lower control arm off the jeep!Love these tires! I was a big fan of the BFG KO2 for years but they just don’t wear very well so I switched to the Patagonia‘s

[@pnwrcdrift]

The general grabber x3 would be cool to see your opinion on, I like them so far and have had them for a year, e rated and 265/70/17 on the same method wheels as your Tacoma even and love the bead grip wheels

[@daveruperd7516]

I’ve had the mt01 in 35 and 37 and they’ve been great. Recently picked up some MT02s in 38s for my LJ and I anticipate more great results.

[@thorn4run]

I’m running the 38x13.50-17 M/T's on my ‘88 4Runner. This is my second season of hard wheeling on these tires and I am very impressed. Only damage I’ve noticed is some of the little sidewall treads have came off. Just yesterday did a trail with a tight squeeze between 2 large rocks. Rounded a few heads off of the bead lock bolts on all 4 wheels but no damage to the tires. My buddy just got a set of Maxxis Trepadors. His first run on them he got a cut in his sidewall about 2 inches long. Luckily not deep enough to be catastrophic.

[@hyperactive3188]

General Grabber X3, those tires have impressed me!! I would love to see a review. I usually run maxxis trepadors and switched over cause they weren't highway friendly and there's times I feel the X3 has better grip just ignored in the crawling community. 37's ,the sidewalls are solid AF on the X3 !!!

[@Endgame392]

I’d love to see an independent review on the icon rebound pro wheels. I just put a set on my Jeep, haven’t wheeled it yet though. Hoping to sometime this year. I put Mickey Thompson Baja Boss m/t’s on it. 37s

[@evintacy7272]

I’ve had great experience so far but mostly on road use so far! I run 35 ona Jk rubicon ,, but do great in snow and rain ya never know what you might get weather wise here in West Virginia!! Great review tho!

[@nickburns5571]

It’s interesting timing your coming out with this review, because I am working with a supplier about issues with my non black labels. I have been running them for about 3 years and 18k miles. In my last two wheeling trips the tread has started to literally separate from the casing. They said de lamination was common under extreme off-road use on the first generation Patagonia’s. I have never had sidewall issues though.

[@timolheiser7874]

I run Milestar Patagonia LT315/70 R17 MT 12.50 tires, I put 20,000 km on a 2020 Sport S Gladiator, and 47,000 km over the last two years, with them on a 2020 Rubicon Gladiator upgraded to 5:13 gearing, with standard suspension. I rotate the tires every 3000km, and have good wear and have only lost 2/32 off the tread. I like their snow performance, but have to be in 4 wheel drive for them to really shine in 3 foot snow, both city and country road driving in Alberta winters, where temps range from 0C to minus 40 C. I haven't yet needed to go into 4 low and apply lockers. In winter I park up piles of snow when parking is full. When I bought them they were $200 per tire, now $464.47 per tire, but I would like to go up to either a 37x12.50R17 LT M/T-02 or 38x12.50R17LT M/T-02 tire, with a 4.5 Terraflex Alpine CT4 Long Arm Extended Travel lift, and Falcon 3.1 shocks. Yes these tires are getting pricey. I had one screw in one tread, and found I had overinflated them, and run them at 37 psi now, rather than tire reccommended 41 psi. That gives me a flat tread and better wear. I had a RAM 1500 with KO2s and found they grab rocks and throw them at speed in corners, but the Milestars hold less stones, and therefore throw less stones.

[@tomandhistruck]

I hear the MT02s are going to be some next level stuff! Along with their XT ATs. Keep up the great work! :)

[@todayiwanthis]

I’m looking really forward to the XTs. I’m going to roll the dice on them

[@ajyoussef2927]

Yes, please do more tire reviews if you can. There are so many choices out there and it would be nice to be able to differentiate. The tire I'm looking to get and therefore nominate I'd the new Mickey Thompson Baja Legend MTZ. Thank you

[@rjfreimuth]

I'm currently running the Patagonia MT's on my JKU in a 37x12.5x17. I'm in Atlanta now and have wheeled all over the place here. Also have driven to Colorado and done a Moab trip back and forth. Aside from some minor chunking here and there I'm super happy with them. When aired down I usually run 7psi I'm on Method wheels but true beadlocks. Looking forward to your notes on the new version for sure as I was thinking about getting a new set in the near future. Thanks for your honest opinion on things. Glad you didn't have to talk all good on a Brand provided tire. Says a lot that they knew you were going to show some of the negatives and were okay with that. FYI tire pressure for street driving seems to be a bit all over the place. I run mine around 30psi cold so when they heat up I'm usually right about 34psi give or take.

[@JCPaintGuy]

My first exposure to Mileatar Patagonias were their A/T’s. Times were very lean for my family then, so I tried a set on my old F-150 2wd. That set of tires went almost 65k miles in just over two years, as it was my work truck as well. I was so impressed by how well they performed in the wet and the snow that when I need new tires, I bought a second set and obtained almost identical results. Our oldest son put a set on his Explorer and got almost 70k out of that set. Last year, when we bought out 2021 Gladiator, money wasn’t near as tight and explored other tires, but ultimately decided on a set of 35x12.50 Patagonia M/T’s. They now have 13k on them, and they have been flawless in the rain and snow - just like the A/T’s were. They are noisier, but that was to be expected. I haven’t had the nerve to take my Gladiator off-road yet, but hope to squeeze in a trip to AOP here in Tennessee in the near future. I can say we have taken the Gladiator on three long distance road trips, and while a bit noisier, it is not exhausting, and the knowledge that I have such a capable tire on my truck is reassuring. I appreciate the honest review Nate. I hope you have better luck with this 2.0 version, and look forward to seeing how they perform for you.

[@artardFTW]

I mean, you really cant be surprised, the mile pattys are the walmart/pep boys special. budget tires, like the OG difinity Dakotas from pep boys. had a buddy rip the same size hole in the sidewall from a root with his old dakotas

[@RenegadesGarage07]

I have 2 sets of Patagonia mt 01 a set of 31.5 on my frontier and a set of 35in on my Jeep I love both they perform just as I need. Looking in to a set of 37in someday for the jeep. I mainly got them for the reason they fit my budget being a pretty cheap tire in the tire market.

[@Abourgeois17]

I had a set of 35 inch patagonias, i loved them for the most part, great on the trails we have around here (north east) did have some issues with the wear pattern, im pretty anal about tire pressures and tread wear. I just couldnt seem to get it right with them so they did have some minor unevenness. But for the price of them i wouldnt complain. Ill most likely be buying a set of 37s once my current tires get worn out

[@thetrailoutthere]

A good tire that has surprised me is the Kenda Klever RT (Rough terrain AKA hybrid). I switched from open country MT to these kenda tires and don't regret it one bit. The sidewall is aggressive for when you're aired down yet the center tread is not too aggressive so as to not create a lot of road noise or rolling resistance which means better mpg. They've been making tires for mountain bikes and other applications for a few decades but they're pretty new in the truck scene.

[@rafaelv9957]

I had great experience with the milestar AT R tires. I live in Dallas and was on my daily. Very good on road.

[@Jake-q2b6f]

I have these on my F150. Got about 20,000 miles on them. No issues and great in the snow!

[@evanwalker6258]

I really like mine on my cherokee, they are not the black labels and I run them around 8-10 psi everywhere I go from Moab to a bunch of places in the Midwest and I’ve not had a single issue with them, and I’ve had them a little over a year with probably 10-15 wheeling trips, i really like them, and they’re more affordable than a lot of mud terrain tires in a 35”

[@fckurcouch]

I love my cooper discovery stt pro I haven't done any crawling but an medium trails never had to even air down and had no issues (37x13.5 r18) also have a set of 33x10 r18 that I used to run until my 37s and never had a complaint been driving on them for 1.5 years so far and the thread is still at 60% (daily driven)

[@andrewbagnall6007]

Just got my tires and lift installed waiting for driveshafts, but I can't wait to try out the M/T01 on my Grand Cherokee !

[@ferp420]

my maxxis tire did the same thing also started with a small stick in the side wall i bought some huge patches and glued the hole up and patched it then put a tube in it the patch lasted over a year it blew out yesterday lol oddly enuff the new tires i ordered should be here today !

[@badgermetal]

Ohhh thank you. I was thinking about getting these soon but maybe not.

[@jdw8995]

Great review I like these tires. So true on tire pressure. 8psi deep snow i have been stuck 6psi not stuck. Sand 6psi is great also tried 4 psi on sand not as good as 6psi. It's different for every vehicle and tire brand. Best advice have an air compressor a tire gauge and don't be afraid to air down.

[@justinjarnagin4771]

Cooper STT Pros are hands down our favorite tire. We all run them on our daily driven vehicles as well as up to Windrock park every weekend

[@blondebeard6335]

I love the General Grabber ATX

[@eodjeep2137]

My first set of Milestar Patagonia MTs 285/70/17 load range E I had on my JKU for 82k miles with zero issues. Tread wear was even and still had 6/32’s when I replaced them. Most of those miles were highway with some off-roading in Utah and Colorado. I ran them at 35-37 psi for on road and 15-20 for off-roading with regular rotations at every oil change. I’m now running a 315/70/17 load range D on my JKU with about 2k miles on them and I’m seeing the same wear as my previous set and I’m running the same psi’s. I try to baby my tires as I can’t afford new ones every year and I rotate them religiously. I did notice with my first set that the rubber was rather soft and they did wear rather quickly at first. I went from 19/32’s to 12/32’s in just the first few thousand miles. However, the rubber seemed to harden up after that and they wore much slower after that in my case as is evident in the mileage I got out of my first set. I realize the mileage I got from my first set isn’t typical but I’m hoping to get at least 2/3rds of that mileage from the set I currently have. If so, I’ll be happy.

[@craigcowling865]

Hankook Dynapro MT2 with Les Schwab warranty is a winner in my book. Would love to see a review on those. A really underrated tire.

[@kendingsor]

Off-roading is like whitewater paddling in that we put our gear through absolute extremes and I think often people aren't realistic about that when reviewing gear. Wet, dry, banged down rocks, sun exposure, dragging through trees...Tires connect you to the ground and our paddle connects us to the water or shoes to the ground. I've seen just about every brand of paddle break, or wet shoe fall apart. I've broken my fair share, and any paddle will break if you stick it between two rocks and crank on it just like any shoe if left in a heap of wet gear and put through brutal hikes and portages will wear faster than sneakers for walking in the mall. Often times the ego turns that user error into the products fault. It's nice to see you be honest about a product give it a fair chance and also maintain the relationship with the manufacturer. I've switched paddles after questioning build quality and breaking my 4th and I've broken paddles and stayed with a manufacturer because I know it was my fault. All times were inconvenient but you have to give the product a chance and not blame it immediately when there are so many variables that can go into it's failure.

[@TinS0lder]

Shout out from Montana. Nice video mate.

[@iamblaineful]

I run their 37 x 12.5 non-black series. I run them on a JT diesel, usually loaded pretty heavy, with a big lift. It isn't my daily, it's my trail and get stuff done at our property rig. We spend most of our time wheeling in the Sierra Nevadas including the Rubicon, as that is where we live close to. I tow trailers(open cargo type) with it and wheel it a lot. We have 10k miles on those tires, from AZ to Death Valley, to the Rubicon. Never had an issue. It is the tire of choice for Jeepers local to the Rubicon, almost all of us run them, never seen this happen on the regular non-black series, and only once on a black series, but it was like yours, rim to tread tear in the sidewall. I rub the sides of mine on sharp rocks, tree stumps, etc....without any worry. We wheel at 12PSI in most places.

[@piasprojects]

Great video! I love the brutally honest review that you give. I have not owned a set but have considered them before. I will continue to watch how they hold up before I decide if I end up using them or not.

[@gldsmith61]

We put those on my wife's trail hawk and they have chunks coming off at 25,000 miles.

[@gldsmith61]

If you run these tire's with low air pressure, they will do that. They should always been driven with air pressure above 36 psi.

[@jeremyrigter7887]

hey nate so i have been running the 37'' milestar m/t for over a year now and have loved them! no problems at all. i do agree with you on airing down lower then 14psi in the snow. i like to run them right at 5 psi in snow and about 7 psi wheeling say elbe or evans creek. big fan hope to see you on the trail!!

[@frizae86]

Im currently running some 31x10.5 patagonia m/t's in washington state on my 91 for explorer. I LOVE them, gone through way deeper snow than i should have, muddy rocky trails and driving faster than they were intended for and have held up amazingly for almost 4 years now!. My next set will be 35s after a lift kit

[@gen1c8rs88]

Yokohama Geolander MT G003 tires are a lighter weight option also Mickey Thompson Baja Boss MT tires would be interesting to get your thoughts on these as well.

[@Trail_Haunter]

Great video, I am running the Patagonia MT 37x12.5x17 and I have had a small stick puncture my sidewall. We put a plug in it and we’ve been running the plug since October. Other than that they’ve been awesome, I crawl around 4-6psi with them and they grab like a charm. We are getting the new 42” milestar MT02 in a couple months so I’m excited to test those out and see how they perform.

[@ronthompson2366]

Good info and your right... tires are just tough to rate for all the reasons that you stated. But that being said... you asked... what Goodyear do you have experience with and how do you rate the Goodyear line up ? Along with Mickey Thompson tires ? I grew up in Eastern Washington and those were the go to brand [in the 70's]... and then we used Goodyear farm implement tires lol... not a lot to choose from back then. Now I am living in the south and Nitto seems to be the go to brand... lots of red clay ... but they howl and don't last on pavement and wet rain on the road can make hard big tread mud tires like skates on ice... Again goes to your point on how difficult it truly is to have a "do all" tire.

[@wesleyhuddleston1]

It's not just the black labels. I punctured 2 of my 38s, 1 of which was very similar to the tear you have. Mine was done on a tree root in some colder weather as well.

[@wrightcycleworks]

I have a set on my MJ Comanche. These were on before I bought it. I absolutely despise them. They are loud on the highway, and don't do any east coast wheeling well at all. My group of friends walk most obstacles I have issues on. Will be upgrading to some STT pros or Falkens soon.

[@brapbrapbrrraaaaaapp4163]

I have a v10 Excursion running 20" wheel 37's. They are a load range F. Only go air down to around 20psi. The side wall lugs have been tearing off each time I go out in the Arizona desert. On the street they are at 45f/50r and just did 3000mi through the gulf to Charolette without any problems. Did great in the beach and highway.

[@watchchannel8201]

Have a pair on my 04 discovery 2. Cords are showing where one of the treads tore off… also big gnarly gouges and splits in the tires side walls. Not leaking air yet, but I’m at the point where it’s no longer safe to use them. Maybe I’ve got 6000 miles at most on them. I got them used off a wrecked discovery 2 and they were almost new when I got them. I am very impressed with the performance this far except the fact they have so much damage…

[@miguelacosta4509]

awesome video, i run PATTY G's on my Rig and i love them.... been running Patty G's for about 4 years now and happy.

[@bobnickelson221]

I've had my Patagonia MTs On my TJ since May 2019 absolutely love them

[@stevewilliams3051]

Would love to see a Mickey Thompson review. I've had two sets of MTZP3 and just ordered the new Baja Legend MTZ tires in 37X13.50 for my JK. All my buddies are running the BAJA BOSS M/T in 40s. We ALL swear by them. Keep in mind we're Indiana boys running in Kentucky, Tennessee, and many other of the Eastern and Mid-Western states. Our terrain is much different out here and wet (slick) most of the time.

[@Bigdaddyslasher]

Everyone I know who had them got rid of them because of the sidewall failures. I run Nitto Trail Grapplers since 2016 and I have some really bad cuts on those old tires and they still hold air.

[@timking2194]

I live in snow county drive in it every day if the winter . It’s not cold snow it’s warm snow much harder to get a tire to work in . I have bead locks and run single digits in pressure and about 15 psi on the hwy on ice and snow. I have always ran bfg ko in 37 inch tires I switched to Patagonia and they did not last one winter from the wear and the extra heat that is generated from running lower air pressure. Went straight back to ko2 now on 39 . They are a much better tire and will out last 3 sets of milestars . They also rock crawl better than Most . They just suck in mud. Bfg for the win .

[@Fei8lo]

I have a set of the Patagonia AT. Thread life has been really good but they were a bit hard to balance the 37 in tire needing 11oz on one of the wheels.

[@BigFishOverlanding]

Thanks for this review, it's something I've been wondering. I'm currently running nearly 8 year old Good Year M/Ts that I purchased off of Craigslist for $50 (the whole set!). So I'm going to have to purchase tires soon and love the honest review.

[@Rayankady]

When I hear milestars I remember 2 channels: LiteBrite and Matt's Offroad Recovery 😅

[@gmarksvlx]

Patagonia MT in 305/70R16 on a 99 XJ. I run 15 psi on Colorado and Utah rocks and dirt. No issues yet (not black label)

[@Weatherby406]

Live south of flathead and had great performance on a 2019 f150. Used for trails and hunting. Has been great from the mountains to eastern mt. Temps from -40 to 100 deg. Mostly snow and rock. No crawling.

[@stacywright9397]

You should post new comment. I believe you have gone back to K02 at this point. I appreciate your most recent content on this. I've been BFG forever and all you guys almost sold me on Patagonia, glad I held firm. BFG has never failed me.

[@girth628]

Great update, Nate. Would love to see you wheel in a set of Kenda Klever RTs. I own a set now on my 1500 but don’t have the opportunities to do what you do. Heard great things about them though and pulled the trigger. Keep up the great content