The Ultimate Car Stereo Installation Guide ~ Upgrade Your Tape Player

This is the ultimate how to guide for installing a new radio in your car. Today we are upgrading the Tape and CD player in the R32 to a touch screen radio with CarPlay and Android Auto. We will remove the OEM radio, wire in adapter harness with power retentions and Monsoon Amp connection, test and install a new radio! We use the proper vehicle harness adapter to prevent cutting factory harness, neatly perform wire splicing and tape the harness. Car radio install is one of my favorite car mods!
0:00 Introduction
0:23 Tools and Equipment Needed
2:29 Harness Breakdown
5:30 VW Wiring WARNING!
7:16 Crimping the harness
12:16 How to remove old Radio
14:23 Testing the new radio
15:49 Completing the harness PROPERLY
17:12 Direct fit microphone
19:20 Taping the harness
20:11 Radio bezel fitting
24:36 Installing a microphone
25:35 Proper radio install
28:34 Radio review
~~~~ Tools used ~~~~
Radio Installed ~ bit.ly/2CGC6qy
Enfig Stereo Mic ~ enfigcarstereo.com/ENFIG_MIC_...
Enfig Stereo Install Kit ~ enfigcarstereo.com/RADIO_VW_G...
Radio Removal (The SIR TOOL is not available anymore) ~ amzn.to/2OLXkpJ
Wire Crimpers ~ amzn.to/39iNYLq
Wire Strippers ~ amzn.to/32IlQQu
Crimp Connectors ~ amzn.to/3eY7Dle
Tessa Fabric Tape ~ amzn.to/2WOa1Vn
~~~~ Was this video helpful? ~~~~
Become A CrewMember ~ goo.gl/D7eROI
Patreon ~ www.patreon.com/user?u=4243029
Shop Amazon ~ amzn.to/2FQErAm
Audio ONLY Podcasts ~ goo.gl/5XcZxB
~~~~ Recommended Tools ~~~~
Impact driver ~ amzn.to/2HsxS2H
Small Impact driver ~ amzn.to/2DZdsMN
Electric ratchet ~ amzn.to/2FydxMS
Magnetic tray ~ amzn.to/2FEpQ6g
Basic hand tools ~ amzn.to/2GnjF7K
Box wrench set ~ amzn.to/2FzoJch
ScrewDriver set ~ amzn.to/2FEjcgd
Shop towels ~ amzn.to/2FC7UgM
Allen Sockets ~ amzn.to/2GlcnAz
Torx Sockets ~ amzn.to/2pL0SfL
~~~~ Playlists ~~~~
Humble Mechanic Podcasts ~ • The Humble Mechanic Po...
Project White Wookie ~ • MK3 VR6 GTI Project Car
Failed VW parts videos ~ • How VW Parts Fail
Tool and Product Reviews ~ • Tool and Product Reviews
How To videos ~ • How To Fix Your Car
MK1 VR6 Swap Videos ~ • VR6 Engine Swap MK1 Ca...
~~~~ Be sure to follow me at ~~~~
humblemechanic.com
INSTAGRAM ~ / humblemechanic
FACEBOOK ~ / humblemechanic
TWITTER ~ / humblemechanic
Amazon Store ~ www.amazon.com/shop/humblemec...
Disclaimer:
The content of this video is available for informational and educational purposes only. It is not intended to be a substitute for the professional advice of a mechanic who has personally inspected your vehicle, nor does it create a relationship of any kind between the Humble Mechanic and you. Every situation may be different, and the Humble Mechanic does not make any warranties, whether express or implied, as to the accuracy, fitness, or applicability of the information or automotive parts portrayed in this video to any project and makes no guarantee of results. The Humble Mechanic and any sponsors of this video will not be liable for any damages related to personal injury, property damage or loss of any kind that may result from the use or reliance on this video and/or any automotive parts represented in this video. You are using the information and automotive parts portrayed in this video solely at your own risk.

[@HumbleMechanic]

Next up we will be upgrading the speakers in the R32. For now we will retain the factory amp, but I have an amplifier install planned too. :)

[@E-3]

lol, such good timing with the video. I have all the wiring kit sitting on my bench ready to go into my MK5. I was the same went with a lower spec head unit but with 5v pre-outs for a future amp. I'm not too keen on the factory amp sound quality, it looks to be running the hi-level speaker out :( But I do like the stealthy factory location and look. Thank you for the great info, I'm keen to see the next stage with your amp install and speakers.

[@stephan6113]

Very good explanation

[@CODE-BROWN]

I just picked up a Kenwood DMX7706S, think it was $380. Has all the Carplay and AA stuff included. The preamp output is only 4 volts but outside of that, it should be pretty decent. I'm waiting for my Maestro RR to show up and then I'll be installing it in a B7 Passat TDI.

[@jonasthemovie]

The VAG 12V and Ignition switchero is one of the most common mistakes when installing an aftermarket unit in a VW, Audi etc. So if your unit forgets the time and stations, switch the cables.

[@HumbleMechanic]

Yep!!!!

[@arnoldkul3827]

Same with all German cars of the era like Opel or BMW

[@josephburton92]

lol I was wondering why I had to reset my audio equalizer every time I turned my car on

[@jonasthemovie]

@@josephburton92 got sorted?

[@josephburton92]

@@jonasthemovie no I’m trying to re wire it now tho .

[@srconcepts1848]

Awesome video! It's nice to see that you're as methodical as I am when it comes to aftermarket installs. I agree totally on using the proper harness- it's tons neater, way easier, and plus you get to build it on a workbench and not all hunched over in the car as opposed to direct wiring it!

[@psavel274]

Long before I became a dedicated tech I ran my own car audio install business. I did everything from head units all the way up to custom fiberglass enclosures with multiple batteries and alternators. I was really big into the SPL scene when car audio used to be quite popular. Over the years it has slowly died off, (at least in my area.) It was refreshing to see someone who knows the proper way to wire a head unit, and actually know what they are talking about. The amount of trash installs I have seen and fixed over my years was ASTRONOMICAL. You would think something as simple as a head unit or single amp install is somewhat of a 'no-brainer,' but from what I've encountered, it is anything but that to some folks. Best buy and circuit city was notorious for horrible work, and overcharging customers for sub-par gear. On the positive side, it was similar to my mechanical/ fab work. Once you do a customer right, and show them your skills you scored yourself a repeat customer that told their friends. I have gotten a ton of business in this way. When you know what you're doing, and don't rip people off, they show their loyalty by using you solely for everything on their vehicle. Many customers I gained came from my time in the stealership or a few indie shops that I worked at. I had so many side jobs I was able to leave those places all together and start my own. I get that vibe from you, and how you conduct yourself, and that says a lot nowadays. You do things right and are an honest and upfront guy. Great to see someone who shares similar values and practices especially in today's world. Nice work dude. As an added bonus you can usually ground your green wire straight to chassis to fool the parking brake circuit and then you can operate the unit when in motion. You aren't an idiot and I don't think you'd be taking your eyes off the road to watch a video, and they really make this that way to prevent people from being dumb and from a liability standpoint. Some of the head units are 'smarter' and need to be tricked in a certain way to do this, or through specific interfacing.

[@AvianAttorney]

Crazy coincidence to have you uploading this as I just converted the single din unit in my e46 m3 to a double din unit similar to this one this past weekend. What an awesome upgrade this is in older cars!

[@JohnMaffa]

what a nice, clean installation. It looks like it came that way from the factory!

[@HumbleMechanic]

Thank you! That is always my goal!

[@vee4410]

Quick tip: you can shorten the brake wire and ground it to the back of the unit to avoid having all that excess wire. Great stuff as always Charles👍👍

[@piti_rocks]

I always directly connect it to ground 😂

[@rich5984]

Great video Charles, just a tip for anyone with limited space behind the dash. If you have a lot of excess wires in the adaptor loom between the factory harness and stereo you don't need why not unpin them from the connector rather than bundle them together. Saves space and the tools necessary to unpin are readily available. 👍

[@charleswirth3632]

That mic is pretty cool. I ran the mic that came with my pioneer radio to the factory mic location in my R32. I just cut a little circle out of the foam dummy plug in the factory mic location and it still keeps it functional and hidden! Good job man! Looks dope!

[@d1zguy864]

Pretty cool. I ended up getting the Chinese RCN210 unit. Killer deal for very good Bluetooth audio, SD card MP3 playback, OEM looks and plug and play on a MK4 with Premium IV single DIN radio without cutting any wires or extra dongles.

[@freedoms9961]

i've watched this video 3 times now start to finish, love the content.

[@MirroCosmoKenisis]

Like and share

[@mattpolhamus9194]

Awesome stuff Charles! I put a similar Sony into my B6 passat and my wife’s Xb. Gotta love having CarPlay in older cars!!

[@kevinnorris6558]

Very informative video. I was thinking of changing the radio in my car and your video makes it very easy. Thank you!

[@JwcubTHS]

Great tutorial Charles! Very thorough and professional! 😎

[@jayburrell]

Great video again always look forward to your excellent content 👍

[@craig84downunder]

Welcome to the club Charles, Ive only ever had one radio that tick the boxes and it cost alot of cash, even had gold plated pre-out!

[@fredjones5327]

Great video bro, thanks God for these vids cause I would be lost without them!!!💪🏽💪🏽💪🏽

[@gerardcurran8664]

Went straight to the link to buy the SIR removal tool😩....such a pity, nice bit of kit. Quality video as always Charles, the work u put in each upload is unreal but does not go unnoticed 👌🇮🇪

[@MrRedtaco11]

I did my own deck 5 years ago. I had never done one before. I was always told they were hard to do. I got the adapter, did all the splicing and within a few hours I had a deck that worked. If you can match colours you can do a deck. I ended up losing my steering controls. So this time around I’m going to keep them.

[@chrisbaugh2737]

Thanks for all your hard work 👍

[@ThisIsReMarkable]

I totally get the need for factory look. I left my mk4 non-Monsoon system in, mostly for that reason. However, I did buy a Gromm Audio charging/ bluetooth adapter that plugs into the CD changer port! (My Jetta wagon didn't come with one so no loss there. 😎)

[@grahamjgreen]

I have the same unit installed in my Mazdaspeed Miata, I love it.

[@Jason-cu1jp]

Love the Hank Hill reference, I tell you what!

[@amazoidal]

I keep my 2005 Prius just for it's cassette player and 6 CD changer. Part of a powerful JBL system.

[@maveric0738]

Great video Charles!

[@nicklittle626]

I've put an OEM RCD 330 in my TIguan. Great and looks stock :) Carplay, android auto too. Was $130USD/$200NZD for me new. Great.

[@GermanEliteTuning]

that looks like a nice head unit. I have when people don't use a harness adapter also. They are not that expensive and they work great.

[@HumbleMechanic]

Legit no reason not to use it

[@052188joseph]

Nice charles, I got a double din with a CD player like a year ago. Unfortunately someone had already installed an after market dated radio so I had to take it all apart. I don't have a touch screen it's just a better radio with Bluetooth and great sound. I still have my mk4 r32 original speakers.

[@heavychevy383]

cool! ...i just went thru a full 10 speaker component build on my car stereo system myself... & i heard u mention crutchfield ...ive been doing buisness with crutchfield forever & they are the Gold Standard for quality customer service! enjoyed the video man, thanx

[@HumbleMechanic]

Me too! When I was going back to find the link to the radio I did, I found my first CF order from 1998!!!!!!

[@heavychevy383]

@@HumbleMechanic yeah, im thinkin im somewhere in the late 80's ...but im 50 so i got ya by a few years (haha) ... but if u havent already, u might consider looking into hushmats "Wave Breaker" pads... ive got em behind every speaker, espically useful behind my 7" mid bass... absorbs the 180 degree outta phase backwave... ive done stage hand/sound work for 30+ years & i can tell ya, the stuff works! (of coarse, i heard u say car audio is what got u in , so u may already know about the stuff, but thought it was worth a mention) ...thanx again for the video man, & btw lovin the miata videos, the wife & i have a 99, & ive never had that Much fun with that Little power! (haha) god bless bro

[@graemeswart6066]

Hopefully you will make a video on how to install a rear view camera in the future. Would love to see that. Love your work.

[@raychambers3646]

As an anti theft device (well more of a slow down )one of my radios had a steel wire bolted to car chassis then to radio case .Every bit helps.

[@fridaynighthikes]

:53. Genius advice 👍🏻👍🏻

[@SecondSkinAudio]

Nice install video Charles

[@3nkrypted]

That mic is a game changer!

[@philipp_vr5179]

Nice clean install. Im going to use the video input on the MFD Navigation to add something like CarPlay or Spotify in the future. That way I get the new features while keeping the original looks ;)

[@stephan6113]

Good video , i am planing to install a new stereo in my 2009 golf 6

[@lightspeed4173]

best instal video for golf on KZbin

[@jokerscape]

I installed the mic that came with the kit in the factory location using the foam block to wedge the mic so oem look with aftermarket pieces mainly to save on cost the Vw one is deffo better quality so I hear

[@ALovelyBunchOfDragonballz]

Ive never heard someone refer to a wire's secondary colour as a "tracer" But ive never heard a better term, so I'm using that from now on.

[@HumbleMechanic]

I dig it. We all hear different things, and I have only ever called them tracers. HAHAH

[@ALovelyBunchOfDragonballz]

@@HumbleMechanic works for me. Something even better, everything electrical I learn was from a colour blind master tech. He was asking me wire colours from the diagram...and I honestly dont think I helped at all. Brown and purple are the same thing to him no matter what

[@HumbleMechanic]

@@ALovelyBunchOfDragonballz DAMN!

[@72dodge340]

@@ALovelyBunchOfDragonballz OK, now I feel completely inept!

[@kazager11]

@@ALovelyBunchOfDragonballz Working on Mack trucks, you will see that all wires are WHITE, w/ ID markings every foot or so. Color blind people was the reason I was given for the change. This is the 1st comment I've ever heard that shows there is merit to the idea. It never failed that the 6 inches of wire you could see was not where it was stamped. So at that point it's like everyone is color blind!

[@ezemond8299]

Just a note with adding a aftermarket radio to a vw monsoon system. If you are not getting any sound, disconnect all the neg speaker wires(the ones with the stripe) from the radio harness and connect them all together at the car side. I worked at a home/car audio shop in the mid 2000's and that was the only way we were able to get headunits it to work with the factory VW monsoon amp, including my 04 GLI.

[@drivewayd7321]

I agree about being picky with head units. Personally I'm tired of spending north of $400 on a head unit just to settle. I have a build I'm working on and will be going with a carputer with external touch screen. I personally feel that it will be years before aftermarket stereos will be more " pc " like to actually run kool programs, have great processing power, eliminate the use of smart phone integration and super high res displays. Would love to see an up to date carputer video. Nice clean install. Nice clean video.

[@HumbleMechanic]

I love this! I have a feeling the R32 will evolve this way too

[@oldkid6]

Great vid as usual Charles! I am hedging on whether to change the head unit on my R32 because I typically like to listen to the exhaust for my soundtrack. If you buy another unit please let us know which one you end up liking since the Sony seems to be a bit of a bust.

[@jp2246]

Super pro level video 👌

[@alanpayne7656]

Great detailled video. i think I'm going to let the installer take of mine tho 😊

[@CyclonesWorld]

Does anyone else watch some of these videos already knowing how to do it, but just wanting to watch Charles do his thing? I did a double-din touchscreen in my 01 GTI VR6 back in the day, and it was surprisingly easy. Programming the adapter for the steering wheel controls was a complete nightmare though. Also, if you want to save some money on Mk4 radio removal keys, grab one of those hanging folders from work and cut the metal in half. The ends that hang in your cabinet fit perfectly in the key slots on the stock headunit, and pop it right out :)

[@HumbleMechanic]

Thanks man. That tip on the radio keys is 💪💪💪

[@Cal94]

having gone to an ATOTO radio, from the stock one in my 2012 RAV4, one of the review comments i took to heart, that i wish i'd taken even more seriously, is physical buttons are super super great on a radio. with buttons, you can just feel your way around the dash to change whatever you need. But with a touch screen, to change from one favourited radio station to the next, you gotta say, minimize maps, then open the radio, then click which ever station you want, then go back to maps. and all of this takes your eyes off the road. which is basically the same as doing that on your phone while having a bluetooth speaker in the cup holder, just with a bigger screen. I have buttons on the wheel, to pick up calls, change volume and open the radio. there's buttons on the radio for home, volume and track seeking. and that's still not great. It's never been a pain in the butt enough for me to go back to stock, but I know my elderly parents also have issues working the inbuilt radio app, such that i've certainly started looking for alternative simpler apps for them to use. because telling them to "go to favourites, don't ever hit the scan button" doesn't seem to work.

[@tompoe27258]

Hello Charles, Love your content. I've got a 2017 GTI with the 6.5" infotainment screen. Have you ever replaced this screen with a larger OEM version? My old eyes could do with a larger screen sometimes when using Waze with Android Auto. Thank you.

[@ComandanteJ]

I'm wanting to do this on my '99 Lexus GS300 but from what i've seen it's much more complicated to do if i want to maintain the factory sub and sub amp. But i guess, in the end, it's just a bunch of cables that need to hook up to another cables, haha. Really nice and detailed vid, very interesting even when i've never owned a VAG car, haha. (Altough a friend of mine has a '04 Seat Leon he wants to upgrade, that shoud be really similar, so it'll come in handy i'm sure!)

[@HumbleMechanic]

Luckily today there are a lot of different adapters for OEM stuff

[@JB-423]

im more impressed that you were able to get the USB plugged in on first try. GJ

[@HumbleMechanic]

Hahahah that meme is so me

[@mickyt87]

For the usb cable search amazon for “pac usb” it’s a panel mount USB port. When I upgraded my radio I installed it in place of the cigarette lighter for a nice clean factory looking install.

[@HumbleMechanic]

NICE!!!!

[@slowboat6021]

thanks for another informative video. do you know is there any of these after market systems which will integrate the OEM steering wheel controls and in dash navigation on my 2004 touareg?

[@MirroCosmoKenisis]

For your job intel You're hands are the nicest I've seen in the trade

[@HumbleMechanic]

HAHA Thanks! I wear gloves a lot.

[@muznick]

The old twist and tape method is tried and true. ;)

[@kazager11]

I used to be big Sony. I have come to find Pioneer checks more boxes than anyone else for the last 15 years or so...YMMV!

[@vault426]

Kudos!

[@moisesvargas3962]

I got the Kenwood DDX 9906 with HD resolution, it was close to $1000, but worth it for my R32 🤤.

[@bluefire025]

Oh wow love it but would really like to see one for the MK7

[@Clint_L]

How was the Bluetooth mic call quality? I just bought one for my Alpine in my MK6

[@scottibass]

what I like to do on those wiring harness adapters is to shorten the wires because most of them are about 3-4 inches longer than they need and they make a big bundle mess when squished behind the receiver.

[@maxdrelinger]

In the future I would probably put a radio with a CD player in. Not because of the CD player, but if it has a CD player behind the screen it will have electronic angle adjustment for the screen. I would also consider a pioneer and run a parking brake bypass. Yes it’s not quite legal, but you seem like a responsible person.

[@Mark_C1]

Alpine FTW 👌

[@QamilB79]

Good job charles 🤣🤣🇺🇸🇩🇪

[@Nefariousrouge]

I have that same power probe torch. Wsd that heat attachment part of your kit? I don't have that in mine.

[@muznick]

"The bugs whacked him, Johhny" Is that close captions for a Starship Troopers audio book?

[@HumbleMechanic]

No it’s a Minus the Bear Song.

[@mercury0214]

I want a radio really bad but I think I should fix my rust first lol edit: and great video as always

[@HumbleMechanic]

Hahaha

[@hnappa51]

Good video came from insta

[@mikeyg4297]

I ve had to renew a dash loom in a passat b5 due to customer trying to fit there own stereo, new loom was over £700

[@chiripa8831]

Hello Charles! When you said to leave the black connector disconnected on older vw models. Would the radio still work with one connector only?

[@schmuhf]

What is the butane tool you used to heatshrink called? Because I need one that is not huge and dependent on an outlet.

[@goodstuffmaynardpokemoncar5638]

I found out you can wire the parking brake wire to the orange illumination wire and bam it works with the headlight switch feels super OEM plus lol

[@TheTaylorWitt]

Hey, I went with the Enfig harness and a Pioneer unit but it only see's Parking Brake down so Android Auto/Carplay won't work. Do you think my solution would be the same as yours and connect the Parking Brake wire to that ground on the factory side?

[@veedubtuner]

Charles, regarding the backup camera feature on the Sony head unit, do you know if it would be compatible with an OEM backup camera?

[@shaeet]

hooking the red wire to the red wire on the install kit will turn the radio always-on on the Mk4's. Maybe its different for R32 specifically but my 03 Jetta with monsoon radio will not turn off when wired this way. You have to run the red wire from the aftermarket radio to a switched 12v wire like the 75x terminal or fuse tap a switched 12v.

[@63Arnast]

How do you wire the steering controls in? Also a lot of modern cars now require a security code to be input if you put in a new radio how do you solve that?

[@midnight-xpress1136]

Personally I have found that taking the two wires you want to connect, twist them together. Insert them into one side of the but connector and crimp the one side with both wires and song worry about the other end. Some installed do that because the wires can vibrate over time and the rocking action will break strands and fail. I've used this method for decades, never had a failure. Using the but connectors the way that they were designed I've had issues. The con is that it makes the harness bulky, so if space is tight that can be a problem..

[@joshuahawkins2548]

Absolutely love the stupid proof videos. Thank you very much.

[@HumbleMechanic]

Hahahahha I like to say idiot resistant.

[@Nando-kh9gu]

What's up Charles ✌️ Was there ever a VW with DSG and the 5 cilinders engine? 🤔

[@macro820]

I used to use butt splices and solder them then use heat shrink but kind of prefer the lineman splice and solder with heat shrink now

[@UrCheecks65]

on my adapter harness there's a orange and black wire, but in the wire diagram it doesn't say what it is, any idea of what it is

[@reecelawson4718]

Hey Charles could you make a video explaining returnless fuel systems please bud?

[@chrisvw7]

What happens if you wire that 12v on the stereo which causes the scanner to no longer connect how would you fix that ? Or what’s the next step have that on my 2000 gti w the 3 plugs

[@secalcavazos3204]

Get a Kenwood would. I'm willing to bet you'll be more than happy with all the amenities you get and I'm sure it'll check all the Boxes you're looking for, so again go get yourself a nice Kenwood and never look back... Kenwood for the win!!!

[@HumbleMechanic]

I’ve got my eye on a couple. I think this radio is going in a new project. Lol

[@harrylumsdon6773]

I bought mic from same place very good. Metra.com has all the dash instructions you could ever need for dash instructions.

[@jamesphilpott4241]

I have old style on my seat ibiza 05 plate. Who every wire stero in before did it wrong and used house hold connecter. So I've had re wire it.

[@gary_lav]

Clean install Charles! Would you recommend a radio with a detachable face as a theft deterrent?

[@HumbleMechanic]

Anything deter theft is a good thing. A low key radio like this is good too

[@nutsack]

thanks for the tip on the gray/white K-line 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

[@gregblau8082]

I have the same soldering iron and always wondered what that attachment was.

[@HumbleMechanic]

It’s great for this application

[@smplyizzy]

Have you seen the aluminum license plate frames that have a camera? Pretty slick install.

[@gplusgplus2286]

Even better, they make license plate lights with an included camera.

[@jdotb23]

Random question but do you have access to Elsa pro and Odis in the US? I work for VW main dealer in the uk and thats what we use for instructions on how to do a job (Elsa) and scanning a vehicle for faults (odis). If not what do you use at the main dealer in the US?

[@HumbleMechanic]

Yep US dealers/shops use that too

[@laalaa99stl]

That is such an easy thing to miss not wiring the brake wire. Then you'd be left scratching your head as to why it isn't working.

[@FrankBruno03]

Do you need to use a power retention box?

[@AnonYmous-qg4ph]

I prefer solder joints, especially if the harness is on the bench. Adhesive lined butt connectors aren't bad, but i only use them when i have to. Definitely don't use cheap brittle plastic coated connectors or scotch locks. You wouldn believe how many cars I get that come in for a no start and i find out the problem was caused by aftermarket crap spliced into factory harnesses with scotch locks.

[@Me-sb3mx]

Yo ! Bro Charles are you having any technical problems ? I tryed to watch your video latest about workbench but youtube is saying that it is private , i still can't watch it ?

[@MikeBMW]

Five Star Car Stereo says: Hold my beer. Even so, great vid! Love it! :)

[@HumbleMechanic]

Thanks!

[@MikeBMW]

@@HumbleMechanic I recommend checking them out, great channel and great information. Dean and Fernando present great installation vids and reviews of car stereos. IKinda like you with car internals and repairs. I enjoy watching all of your vids!

[@HumbleMechanic]

Awesome. Thanks for the recommendation. I’ll be checking them out for sure.

[@harrylumsdon6773]

5 star is awesome.

[@mxngrmln]

I have a 2019 35th Anniversary GLI. What are your thoughts on this vehicle and if you have heard any issues or problems? What is your auggestions as far as modifications as well i have thought about the race chip but the reviews are 50/50. I love your videos as well as DAP.

[@HumbleMechanic]

Gonfrats that’s a rad car! A tune or a JB4 is a great mod. New/better tires is another. I’d start there. Luckily they have been pretty solid cars so far

[@mxngrmln]

@@HumbleMechanic what is your opinion about the H&R VTF adjustable springs? I have not been able to get enough reviews to decide as well. can you do some glitter videos in the future please? thank you for your response =)

[@brianskinner4328]

I was curious if you were going to do one in the white wookie where the modules will talk nicely to the aftermarket radio so you can use the scanner to diag the whole car. I was just thinking video idea

[@HumbleMechanic]

I probably will do one in the GTI. But I wanted to be sure I mentioned that here. Just don’t hook up the K line!

[@itzshxdyy7377]

So I just installed the xav av1000 on my vw and when I turn the volume up loud it restarts the radio any fix?

[@domagojkosanovic7778]

When ever i get a car for some repair i always see crapy cabel connection on the aftermarket radios. On the last repair the fuse for the radio blow and the owner didnt know how to find the fuse. And the wire behind the radio was exposed no isolation nothing not a single wire was isolated.

[@wookievr641]

Have you ever ran into MK4 R32 radio dropping out speakers one by one? Sometimes small bump will bring in additional speakers. Also I hope to get my R to my house after sitting at my parents to work on some wiring gremlins. Interested in material? I did find Haldex connector corroded already but have more checks to do. Thanks for the content. Keep it up.

[@HumbleMechanic]

Pinched wiring I’ve seen do that a few times

[@wookievr641]

@@HumbleMechanic you sir are on top of things. I’m going to pull panels off once I have the R at home to make repairs. Thank you

[@WH-Innovation]

Hey @HumbleMechanic you should look into Eonon radios amazing product for the price great quality ! your car would need model: GA2180A