The Ultimate Quad Trailer - Part 2 The Walking Suspension

In Part 2 of The Ultimate Quad Trailer we continue to work on the walking suspension and it is coming along nicely! (#theultimatequadtrailer)
Please share this video and subscribe to the channel to help us out.
We have a Playlist for this trailer, check it out here: • The Ultimate Quad Trai...
Until the next one, keep Living the Northern Life!
I bought these in Ontario Canada so I'm not sure these will be much help.
Tires/Wheels: www.cerka.ca/62-22-8-4-22-x-11...
Axles: www.princessauto.com/en/1250-...
You can help support the channel if you Subscribe and hit the Bell notification for All updates so that you are notified when I post a new video.
We have a new Patreon account as well if you would be willing to support us this way as well.
/ livingthenorthernlife
You can also help support the channel by clicking on the links to any of the items below.
Even if you choose not to purchase any of these items we would receive a commission if you purchase any item from Amazon within 24 hours of clicking on any link below.
9 inch Chainsaw Tooth Brush Blade
Canada: amzn.to/2CQJPm7
USA: amzn.to/2ECFlQB
Sharpening Stones
DMT WM8CX-WB 8-Inch Duo Sharp Plus Bench Stone - Coarse/Extra Coarse with Base
Canada - amzn.to/2Yogfey
USA - amzn.to/2QxPII5
DMT WM8EF-WB 8-Inch DuoSharp Plus Bench Stone - Extra Fine/Fine With Base
Canada - amzn.to/2UwsSTu
USA - amzn.to/3lljtKx
Microphone
Neewer CM14 Mic Phone Mic on-Camera Video Microphone with Shock Mount
Canada: amzn.to/37RKTRF
USA: amzn.to/3b1CcpG
I normally do all my recording with my iPhone but my tripod doesn't have a way to mount a cold shoe so I found the Ulanzi ST-02S and it just mounts to my current tripod
Ulanzi ST-02S Newest Aluminum Phone Tripod Mount w Cold Shoe Mount
Canada: amzn.to/37VZqvJ
USA: amzn.to/3b1QI0G
JOBY GorillaPod 3K Kit. Compact Tripod 3K Stand and Ballhead 3K for Compact Mirrorless Cameras or Devices up to 3K (6.6lbs). Black/Charcoal
Canada - amzn.to/2zr7zvu
USA - amzn.to/2YI1ILQ
AmazonBasics Chest Mount Harness for GoPro Camera - Black
Canada - amzn.to/2UyHyBU
USA - amzn.to/2ExwrEc
Amazon Prime
Canada: www.amazon.ca/gp/prime/pipeli...
USA: www.amazon.com/amazonprime?ta...
Books
Learn to Timber Frame
Canada: amzn.to/2I0Jyhi
USA: amzn.to/2EFSKaz
Build a Classic Timber-Framed House: Planning & Design/Traditional Materials/Affordable Methods
Canada: amzn.to/2Gn15hI
USA: amzn.to/2kbBrEv
Timber Framing for the Rest of Us: A Guide to Contemporary Post and Beam Construction
Canada: amzn.to/3a4orUY
USA: amzn.to/32xNw99
Tools
Swanson Tool SO107 12-Inch Speed Square
Canada: amzn.to/2wzgAkz
USA: amzn.to/2G0MB9v
Big Horn Marking Knife
Canada: amzn.to/2UhoSIF
USA: amzn.to/2YJElkP
STANLEY FatMax Premium Tape, 35-Feet x 1-1/4-Inch
Canada: amzn.to/34zH4yR
USA: amzn.to/2Qzx9U4
Ryoba 9-1/2" Double Edge Razor Saw
Canada: amzn.to/2WNc6OC
USA: amzn.to/31DhZUa
Milwaukee 48-59-1808 M18 & M12 Rapid Charger
Canada: amzn.to/2HekiCq
USA: amzn.to/2Exx6FG
Fiskars 18" Billhook Saw
Canada: amzn.to/2XyRaim
USA: amzn.to/2QxOblo
Fiskars Axe And Knife Sharpener
Canada: amzn.to/3cjdu3z
USA: amzn.to/32vKDpi
Wood is Good 30oz Mallet
Canada: amzn.to/2WVz5dy
USA: amzn.to/2G76GLx
Lee Valley:
Veritas Mk.II Standard Honing Guide - www.leevalley.com/en-ca/shop/...
Veritas Honing Compound - www.leevalley.com/en-ca/shop/...
Barr 2" Framing Chisel - barrtools.com/product/framing...
Search Terms:
Barr Tools
Barr Chisels
Chisel
DIY
Homestead
Timber frame
Timber Framing
Timber Framing Chisels
Woodworking
Woodworking Chisels
Woodworking Tools
0:00 Intro
0:10 Plans for the trailer for the day
0:48 Cleaning the welded joints for paint
2:14 Painting the welded joints
3:34 Setting up the Walking Suspension for Welding
3:54 Rummy's home and Says HI!!!
4:32 Welding the walking suspension
5:54 Welding closeups
9:33 Test fitting the Walking Suspension
10:20 Cutting End Caps
10:45 Closing Remarks
11:12 Outro
#242

[@TORAH-613]

Thats one tough old man to be welding without gloves on. I did that ONE time... blistered the hell out of my hands.

[@LivingtheNorthernLife]

He is tough… even in his mid 80’s.

[@ciaranconeely8579]

Comment for the algorithm to help the channel 👍 .

[@LivingtheNorthernLife]

Thanks for that! Andrew

[@reginaldwinsor2759]

I made this cart from your specs. It turned out great except I had to add a sleeve attachment to the reciprocating arm. It got worn fairly quickly with continued use. No big deal.

[@LivingtheNorthernLife]

The trailer is amazing! Everything spring I pull the bolts out and grease them. So far they’ve been holding up. I totally agree that bushings would be better though.

[@skateinspace]

welding with barehands lol great way to get skin cancer real fast

[@LivingtheNorthernLife]

Thanks for your concern Andrew

[@CrookedWoodsFamilyOrchard]

Looking good, I miss my welder

[@LivingtheNorthernLife]

I bought this welder about 10+ years ago and this is the first time I have had a chance to use it. :)

[@SomeplaceOrAnother]

Great project 👍 looks good so far

[@LivingtheNorthernLife]

Thank you sir! I need to hurry up as winter is coming quickly!

[@Johnrider1234]

We had 5 rubicon’s. We are down to two because we bought a 5 passenger Honda 1000 pioneer with glass front and back. And heater.

[@LivingtheNorthernLife]

They’re 520’s now aren’t they? I think a friend of mine had a Rincon and I think it was a 600. I either need a bigger quad or a compact tractor now.

[@Johnrider1234]

@@LivingtheNorthernLife yes they were all 520

[@kevindanielpradolarios2605]

me gusto demasiadooo

[@LivingtheNorthernLife]

:)

[@joelaurasurfresort8516]

Hi love the build. Do you have plans available?? I’m on a super remote island in Indonesia and this set up would be fantastic for my property 🤙🏼🤙🏼

[@LivingtheNorthernLife]

Hi Joel, We don’t have any printed plans but episode 9 should have everything you might be looking for. Thanks Andrew

[@joelaurasurfresort8516]

Living the Northern Life thanks so much 🤙🏼🤙🏼

[@robertd6925]

Did you use bearing for the pivot points?

[@LivingtheNorthernLife]

Hi Robert, We didn’t use any bearings on the pivot points. Thanks Andrew

[@revskull]

Why not have the axle spindle goes through both pieces of square? Or why did you choose to extend the square out with another piece with the axle?

[@LivingtheNorthernLife]

Wheel spacing from the walking suspension. This gives room for the tire not to rub against it.

[@gerrycarson9505]

Good thing you had that hard hat on. Just need to wear a covid mask

[@LivingtheNorthernLife]

My hearing is worth more to me than that.

[@alexzechini5121]

Very Nice. how many kg does each axle support in weight?

[@LivingtheNorthernLife]

Hey Alex, The axles are rated for 1250lbs each but the tires I’m using are only rated for 400lbs each. There are high speed axles I bought from Princess Auto. I think they’re $79.99 but normally go on sale for $49.99. Thanks Andrew

[@robertd6925]

What wheels and tires did you use?

[@LivingtheNorthernLife]

Hi Robert, I bought these in Ontario Canada so I'm not sure these will be much help. Tires/Wheels: www.cerka.ca/62-22-8-4-22-x-11-8-knobby-atv-trailer-tire-on-4-bolt-wheel?search=62-22-8-4 Hub: www.princessauto.com/en/1250-lb-high-speed-trailer-stub-axle/product/PA0002080000 Hope that points you in the right direction! Thanks Andrew

[@ASSHOLE123456ish]

Where did you get the axels an hubs from ?

[@LivingtheNorthernLife]

We bought them from Princess Auto. They normally go on sale for 50% so i think they were $39.99 on sale (maybe $49.99)

[@KOPidanCHeese]

Nicee🤩

[@LivingtheNorthernLife]

Thank you!

[@sergey3791foton]

Такой прицеп к мотоциклу или к мопеду, оставив заднее ведущее колесо на месте., а удлинив только раму.

[@LivingtheNorthernLife]

There are lots of uses and attachments that the base can be used for.

[@arildovieira4438]

Quero esse projeto

[@LivingtheNorthernLife]

It's a great trailer that's for sure!

[@LukeBlizz]

Do u have a set of plans for sell

[@LivingtheNorthernLife]

Unfortunately I don't. I do have all the parts and measurements in Part 9 of the series if you want to watch it and write them down. Thanks Andrew

[@kaltenbaughbrothers4225]

Where did u get ur hubs and tirea

[@LivingtheNorthernLife]

I bought these in Ontario Canada so I'm not sure these will be much help. Tires/Wheels: www.cerka.ca/62-22-8-4-22-x-11-8-knobby-atv-trailer-tire-on-4-bolt-wheel?search=62-22-8-4 Axles: www.princessauto.com/en/1250-lb-high-speed-trailer-stub-axle/product/PA0002080000

[@rossokeefe9268]

Where dud you get the wheels at?

[@LivingtheNorthernLife]

This is from Part 9 in the description: I bought these in Ontario Canada so I'm not sure these will be much help. Tires/Wheels: www.cerka.ca/62-22-8-4-22-x-11-8-knobby-atv-trailer-tire-on-4-bolt-wheel?search=62-22-8-4 Axles: www.princessauto.com/en/1250-lb-high-speed-trailer-stub-axle/product/PA0002080000 Base is 2"x3"x3/16" Bed is 2"x2"x1/8"

[@rossokeefe9268]

@@LivingtheNorthernLife yeah link don't connect for the wheels...guess they be the same as atc, 200m, were they expensive?

[@LivingtheNorthernLife]

@@rossokeefe9268 they were about $120 CDN each

[@LivingtheNorthernLife]

@@rossokeefe9268 I see the price changed to $142 now www.cerka.ca/index.php?route=product/product&product_id=1575&search=62-22-8-4

[@billhennen1791]

I've seen welders take a new stick for every weld, sometimes five inch waste. I m more like you if it has flux on it i will burn it to the end.

[@LivingtheNorthernLife]

Ya I don’t have that kinda cash to throw around. Hope you enjoy the video! Andrew

[@TORAH-613]

These videos would be better, had you brought us closer in on what you were actually doing.

[@LivingtheNorthernLife]

Ya, this was 3 years ago. Trying to get better but wasn’t really thinking about a “how to” while recording this. Andrew

[@franciscovillodres9823]

La idea es muy buena, pero los soldadores malísimos 👎

[@LivingtheNorthernLife]

they haven't broke yet... carried some big loads too.

[@franciscovillodres9823]

@@LivingtheNorthernLife me alegro que aceptes también las críticas, la soldadura se aprende con la práctica, por eso no te preocupes y la idea que es lo que cuenta si la tienes, o sea que ahí llevas mi like y mi suscripción, muchas gracias 🙏 un saludo desde Malaga 🇪🇸

[@evergladescreations9641]

Watch those arms you will get sunburnt from.welder ☹️

[@LivingtheNorthernLife]

For sure! I did buy a welding coat from Amazon in a later episode in this series.

[@kenlink5667]

Welds look porous. Is the rod damp? Welding without gloves is just wrong.

[@LivingtheNorthernLife]

Thank you for the feedback.

[@1966cambo]

GET OUT OF THE WELDING SMOKE PLUME!!!!

[@LivingtheNorthernLife]

Oh Man! It's the only bad habit we have! 😂😂😂 Just kidding! Thanks for looking out for us!

[@WalidZinou-zl8pl]

I love your work and I also work as a welder like you. Can I have your Facebook page? Thank you.

[@LivingtheNorthernLife]

Thank you but we really don't have much of a Facebook page