The Versatile Duty Holster: Alien Gear Rapid Force Deep Dive! (Part 2)

[@AngrySargeG01]

Tell me the most surprising thing about this holster in the comments below. Did you like it or did they miss the mark? Would you consider adding the Alien Gear Rapid Force holster to your setup? If you like this content please consider Subscribing to the channel as well as Liking, Sharing and Commenting.

[@YourFavoriteLibertarian]

Yes please for the holster-off series!

[@AngrySargeG01]

👀👀👀👀

[@Robnala135]

I just recently learned the “proper way” to use locktite. Put a dab in the screw hole itself instead of the tip of the screw or the screw thread. Works like a charm. 10-8

[@AngrySargeG01]

@@Robnala135 I like it, it might be easier. Just what I’m used to. Back in service yep lol.

[@ZeonsZone]

Great in depth video. That is cool how it will fit multiple lights vs having to get multiple light bearing holsters. Thanks for taking the time to make this for us.

[@AngrySargeG01]

Hey Z always appreciate the view and comment bro. Yeah it’s cool I like what all it can do and the customization is very nice. But thank you for watching it means a lot.

[@Sons_Of_Liberty_1739]

I never heard of this holster before your videos. Thanks for explaining everything about it.

[@AngrySargeG01]

Hey bro thanks for the watch and comment. I’ve seen it just got my hands on it and felt like I wanted to make a new duty setup.

[@FrankLawtx1]

This was a deep dive for sure into this video. Good information I'm curious to see what your long term thoughts are.

[@AngrySargeG01]

I’ll definitely put it through it’s paces to see if it is feasible for long term duty use. Initial impressions are good but I am always skeptical until I’ve had time with it.

[@FrankLawtx1]

Perfectly understandable I'm glad to have people doing full breakdowns regarding gear and how to mount or set it up. There is a real need.

[@AngrySargeG01]

@@FrankLawtx1👊🏼👊🏼👊🏼 thank you for being a supporter and getting in on the comments on every video.

[@FrankLawtx1]

We got your 6 as a fellow brother in Blue we support you.

[@TeamAnvilHQ]

Thanks for the in depth breakdown! Great vid🔥👊🏼

[@AngrySargeG01]

Thank you for checking it out and the comment. I feel like I had some lessons learned from this video which will carry over to the next. However the beginning part was my natural reaction to the holster which I edited out and put it as the beginning. But thank you a lot for the watch and comment. Definitely means a lot.

[@ragtop4543]

Great video! I've been looking at holster options for a while, and you answered my remaining questions about the Alien Gear holster. I'm use to the QLS system too. Have several Safariland holsters and think they're good, but need updated. Take a look at True North Concepts belt hanger, it's pretty good too. Pulled the trigger on a Rapid Force w/(QLS) Tactical adapter tonight after watching your video. Keep up the good reviews!

[@AngrySargeG01]

Hey thanks for the input I appreciate all the feedback. I know it was a long video but I think there were a lot of things that needed to be shown. I like the idea of the mha from true north but the fact that you have a piece of metal digging into your side turns me off. I wanted to get away from hard items after my hip injury. Which is why I’m even moving away from the UBL. It’s definitely why I think the bang hanger will be the way moving forward. But I definitely appreciate the comment and I’m glad you got some value from the video.

[@TheTexasPatriot-wj2zy]

I’ve been running the ag tactical tan kit for about 1 1/2 years and it quickly became my daily holster

[@AngrySargeG01]

That’s the holster I want to get and get it wrapped. Good to hear some positives about it.

[@TheTexasPatriot-wj2zy]

@@AngrySargeG01 idk if they are still producing it…it’s been labeled as out of stock for a while now, i check the website every 1-2 weeks

[@jasonschell9860]

I don’t have a need for this holster and I’m a conceal guy but I’m intrigued and this would be good for my hikes and times I’m away from civilization

[@AngrySargeG01]

Most people don’t it is more of a duty or range holster. But it is not a bad thing to have a setup for things going south. I definitely understand your needs and maybe one day I’ll find a concealed carry option worth its salt.

[@TheTopherloaf]

I didn’t watch all 51:50 but for those that may not want to either or because it wasn’t covered, there’s a retention screw that tightens the holster and takes out the wiggle/rattle.

[@AngrySargeG01]

Definitely a long video and it was covered in it. That was definitely something I liked about it. Very good point you brought up. Thank you for pointing that out. I actually have a short for that coming too.

[@TheTopherloaf]

@@AngrySargeG01 sweet holster for sure. Keep up the videos. We need more content creators.

[@AngrySargeG01]

@@TheTopherloaf thank you for saying that I really appreciate it. The words of encouragement I get from people who just take a little of their time and watch my stuff means a lot to me. It has helped me grow as a creator. So from the bottom of my heart I truly thank you for taking the time to watch and comment especially what you said really helps other viewers as well.

[@shoguncustoms]

Wait. You put your pants on one side at a time??? I hang a line across my room where I hang my pants. Then I do 3 backflips into them. Both legs at the same time man. Soooooo yeah lol. Good video man. Great buttery smooth mono tone voice too 😂 I think I'm gonna grab one of those. Can't wait for part 3 of this series

[@AngrySargeG01]

You had me at backflips lol. Part 3 coming next Saturday it will be shorter. The next part is my favorite part as far as product goes. Pretty cool setup.

[@shoguncustoms]

@@AngrySargeG01 looking forward to it

[@kulasakung6091]

May I ask a question , this holster scuffs up your gun slide ?

[@AngrySargeG01]

Yes it will wear your slide but it will take a good amount of time before it does. I've been carrying it for a bit and no real wear on my glock slide as of now.

[@EZedp]

Great video…luv the versatility with different lights and optics. I will probably contact u with some q’s I have. 👊🇺🇸

[@AngrySargeG01]

You know how to reach me lol.

[@AngrySargeG01]

Thank you for the watch and comment.

[@gralingslayer]

Thanks for the information. The price is very reasonable.

[@AngrySargeG01]

Thank you for the watch. It’s definitely up there in price but it is also nice to be able to choose the options you want and not have to search through so many different numbers like safariland. Appreciate the comment as well.

[@YourFavoriteLibertarian]

Hey, I like long videos! The more detail, the better IMO.

[@AngrySargeG01]

Hey I knew you would be the one to say that. Thank you for your support and I appreciate you as well as your videos too.

[@joelrosado6459]

Hi I have a two part question to ask. If I am running a g19 would it be better to get the g19 holster. Is it better as far as retention goes or would it be just longer is all. I practice with a g17 airsoft pistol and wonder if it worth getting the g17 size holster. Also as far as the locking system goes do you think it would be better to run a mid ride qls or just run the mid-ride from alien gear. Thanks.

[@AngrySargeG01]

Hey sir sorry for the delay I did not get a notification. I’ll be honest get the full size the retention on it will be just fine for the g19. To answer your questions do you like to swap out holsters on your rig? If so run the qls if that’s what you already use. If you want to run the alien gear version and you are going to have several then sure do it that way. It’s all about preference at that point. Hopefully this helps.

[@godsforces1776]

Thank You 👍👍 I've been waiting for the Alien Photon Holster for my Beretta APX-A1 Full-Size with Factory Optic and an add-on flashlight . Is there any other Alien Photon Holster that is designed for a specific model and also fits my Beretta APX-A1 Full-Size with Factory Optic and Add-On Flashlight .. ? A frustrated Retired NYPD 🇺🇸💙🇺🇸

[@AngrySargeG01]

Hey thank you for watching. I appreciate you and your service as well. Honestly I don’t know if it fits a Glock holster you can try other Glock holsters. But I know the Blackhawk Omnivore would be a great option as it holds many weapons and light setups. It is frustrating when there aren’t many options out there. Hope this helps.

[@godsforces1776]

@AngrySargeG01 Thank You Much , I will find out or just wait for it to come out I love the Beretta APX-A1 and sick and tired of the 2X4 grip of former service G19 Gen3 for 26 years ..

[@AngrySargeG01]

@@godsforces1776 I definitely see that holster an IWB is what you want you may look at a custom holster company like Alpha Omega Kydex. Carry what you like not what you would be forced to. I understand I’ve carried a Glock for most of my career.

[@godsforces1776]

@AngrySargeG01 Great Advice and Advise I'll keep my head up Thank You and keep up your good work

[@AngrySargeG01]

@@godsforces1776 I appreciate the watch and the comments as well as the encouragement thank you so much.

[@Prepppingainteasy]

Is it compatible with a compensator ? Or cannot be modified to allow it?

[@AngrySargeG01]

@@Prepppingainteasy it is not compatible unless you run the 17 size with a G45 and radian ramjet afterburner. That is the only combo I found that works. The shadow systems xr920p comped works as well.

[@sohcturbo]

Why didnt you put the 3rd screw in the adapter? There is 1 screw that goes through the adapter to the holster before the qls fork and 3 other screws.

[@AngrySargeG01]

I don’t know I will look at it I figured it was only the 3 screws so I will check and see what I missed. Appreciate you bringing that up. I’ll definitely figure that piece out.

[@AngrySargeG01]

Ok so a follow up I looked at the holster this morning before I came onto shift and the screw was there. I believe I put it in during the filming but didn’t show the video on it. However I will be addressing it in a short video to go along with this. Would it be ok to mention your user name as bringing up this issue and addressing it? If so I will include you in it. If not I will just say a comment was brought to my attention regarding that. Thank you for seeing that and bringing it to my attention. Very good point.

[@sohcturbo]

@@AngrySargeG01 yeah not a problem

[@AngrySargeG01]

@@sohcturbo I appreciate that and thank you for pointing that out.

[@dougharlow6037]

I curious why you need that “T” adapter? It looks like the QLS will fit directly on to the holster? What does the adapter do? Doesn’t Safariland make a Mid or low ride fixed holster with QLS without any swivel? Great video.

[@AngrySargeG01]

Thank you for taking the time to watch the video and comment. I appreciate you saying it was a great video. It definitely looks like it could fit but it does not. That T adapter is what sets safariland apart from Blackhawk g code and others. The hole pattern belongs to Safariland which is why you need that. The adapter only helps mount the QLS or any Safariland product to the holster. Yea Safariland does make mid and low ride and you can add the qls to it.

[@farh3t270]

Definitely a good in-depth review! Maybe I'm too old school & my grumpy old man syndrome is kicking in but that is only a level 2 holster. Original LE retention levels have distinct separate actions , passive friction doesn't count. From my academy days it went like this L1 was just a thumb snap, L2 added another such as a rocking or twisting motion & L3 was another active retention, think old style Safariland SS3 you had a thumb snap, trigger guard snap & the rock or twist motion to be able to draw it.

[@AngrySargeG01]

See you know the old way yes they still had those when I started in LE some agencies were still issuing them. However times have changed and the way they classify levels are slightly modified or updated. Definitely not too old school. Thank you for the comment and the watch it means a lot to me. The comment definitely brought me back to the old days of the first Safariland holster which was a level 2 I was issued at the academy.

[@farh3t270]

My first (95ish) was the Uncle Mikes L2 thumb snap, twist & pull. Still have it in a box somewhere

[@AngrySargeG01]

@@farh3t270now that is nostalgia for sure. Pretty cool you have that.

[@SpecterSolutions]

Good video. Unfortunately mine failed three times. Alien gear isn’t the way in my experience.

[@AngrySargeG01]

Thank you for the comment. It was definitely a long one. Also please share your experience you definitely have some insight that I do not. Which is why I’m looking into the long term. Also did you get the initial release? I’m curious to know what issues you had. I’ll be testing before full implementation into duty I need to be sure I won’t have any issues. We trust our lives to our gear. Thank you for the comment it is definite appreciated.

[@FrankLawtx1]

Great insight just like Sarge it would be cool to hear your issues if this is a buyer beware product or not. I saw MilSpec Mojo loves it but I like to hear other people's opinions as well. I agree with your comment this is a good video.

[@SpecterSolutions]

@@AngrySargeG01Of course! While doing terrain training, mud got into the button and hood mechanisms making it impossible to get the gun out of the holster. Another instance occurred when I was doing Vehicle tactics, the button failed with dust and pebbles getting into the mechanism. Also the retention warn out over time of a few months somehow. Dully note I use my Gear hard, especially my duty gear. I need to know it will work at all cost, alien gear unfortunately failed in two different environments and trainings.

[@AngrySargeG01]

@@SpecterSolutions this is definitely good info to have and important to note that on a more rigorous application I can definitely see it failing. Getting your pistol out when you need it is important which leads me to want to know if maybe I do a holster off with a few companies level 3 holsters can I have issues. Mud I can see a problem small rocks yep there is room for that to mess up. Dust it should not and since it did on your end that is a major concern. Now you have peaked my interest on content. I ran my stuff hard too. Between Mil and SWAT so I get it. Unfortunately this is a first impression but now for science I must collect data lol.

[@SpecterSolutions]

@@AngrySargeG01Looking forward to you putting your test and thoughts on the holster! Keep it up Sarge 👊🏼

[@Croak1]

C'mon Sarge, you know better than that. You're supposed to yell "Frag out!" when you drop an Olight so we can get small. :)

[@AngrySargeG01]

🤣🤣🤣🤣 my bad I forgot we were playing by those rules. I had to be a rebel I guess. Living life on the edge and surprised I didn’t die 🤣🤣🤣🤣

[@AngrySargeG01]

An idea for a short just happened. Thank you for that 🤣🤣🤣🤣.

[@Croak1]

@@AngrySargeG01"Shorts" are what causes them to go boom!

[@AngrySargeG01]

@@Croak1 👀👀👀👀 well then let’s do it for science!!!

[@jacobham322]

What ride height did you pick up?

[@AngrySargeG01]

I got the low ride. Always low but with the next video you will see that really it didn’t matter.

[@jacobham322]

What version did you get?

[@AngrySargeG01]

@@jacobham322 I got the level 3 with the mrds XL Hood.

[@markmccormack1796]

Better than the CT3 by Comp-Tac?

[@AngrySargeG01]

That I don’t know I do want to get one to do a holster comparison between the top 3. That would definitely make for some good content. Appreciate the view and the comment.

[@markmccormack1796]

Just an FYI. I just confirmed with Alien Gear Sales, they do not make Rapid Force duty holsters for HK models. I was not given any information as to when or even if they plan to make them. @@AngrySargeG01

[@AngrySargeG01]

@@markmccormack1796 hey I appreciate the heads up on that. Something people who have and carry HK should know.

[@tommytipton8698]

Be nice for my XD if they make it !!

[@AngrySargeG01]

Yeah I would love to see more options myself. So I agree. More options for the masses.

[@gamma5vega]

Does it fit a glock 34?

[@AngrySargeG01]

It does not unfortunately. It will fit the 17 and below 19, 19X, 45, 47, 49. As well as the .40 variants and .357 sig possibly.

[@32sRus]

Is this Mid ride or low ride?

[@AngrySargeG01]

Mid ride. Kind of the sweet spot for me.

[@32sRus]

@@AngrySargeG01 Ok Cool. Looking to get alien gear holster but i was back and forth between mid and low.. ill probably go with mid also. I don’t like mine too high but i also don’t like it too low lol

[@AngrySargeG01]

@@32sRus it’s definitely worth checking out and I am an affiliate and would appreciate it if you click on my affiliate link when you purchase. Thank you for checking out my channel and videos I greatly appreciate it.

[@32sRus]

Will do! Thank you

[@AngrySargeG01]

@@32sRus I know it’s cheesy to ask but it does support the channel and I really appreciate it. Thank you again.

[@systematic402]

Great content and decent video recording but the audio is annoying and too loud. The music specifically. It could be 1/3 as loud.

[@AngrySargeG01]

@@systematic402 I appreciate that input I’m still learning how to adjust my audio to a more comfortable level. Editing has definitely been a learning curve for me. I appreciate the insight as well as your encouragement thank you.

[@kevf500]

To bad they don't make them for a 2011 handgun

[@AngrySargeG01]

I can definitely agree with this one. While I don’t own one I am working towards it. So one day. And I’d want to be able to carry it on duty as well.

[@dondehne5370]

Did they legit rip off alienware's logo and name? They were hoping no 2nd amendment people were also PC people

[@AngrySargeG01]

That I do not know. It looks similar though I had to check and verify. Crazy I didn’t think of that until you mentioned it.

[@Krebstar100]

I doubt Dell gives a crap about it.