This is what one would call the “screw your tax stamp” gun.
@elmateo77 Жыл бұрын
Or just get an actual bullpup in a rifle caliber...
@zoch9797 Жыл бұрын
@elmateo77 Or get both, because it's about fun
@frognutz0o Жыл бұрын
Why would you need a tax stamp on a 16 inch anything? Is it the overall length that is an issue?
@unreal4202 Жыл бұрын
@@frognutz0o barrel length on rifles matter. Bullpups move the action back so you can have the longer barrel but decrease overall length
@unreal4202 Жыл бұрын
@@frognutz0o anything less than 16” barrel on rifle is considered short barrel and falls under NFA regulations.
@CPRSquared Жыл бұрын
Thanks Colion. I went out and bought one. With the weight so close to the shoulder, this thing maneuvers like a 911GT3. Incredible.
@metatactical6 ай бұрын
Now that is a comparison we need to start using! Thanks for the support.
@basbomb20183 ай бұрын
Bullpups are the mid/rear engine cars do the gun world
@chopper8fist515 Жыл бұрын
That's an impressive platform. I like that the bullpup platform lends to the stability.
@m_hub3957 Жыл бұрын
and a sloppy trigger
@knunn5171 Жыл бұрын
Look’s cheap and dumb with that barrel jumping up and down. And now we are saying bullpups are sbrs?
@comosediceesoo681 Жыл бұрын
@@knunn5171 no just look at how many points of contact you have with very little recoil it's better than putting a shoulder stock on a pistol.
@wesman7837 Жыл бұрын
@@comosediceesoo681 It is pretty cool!
@Cavemanheartrock Жыл бұрын
@@knunn5171 Sounds like we got a poor.
@easyedub Жыл бұрын
That 'cheek' incident had me LMAO. Hard to go wrong with any platform that stabilizes a Pistol / Caliber in rifle form. I manufactured an ATF AR SBR in 9MM and it was so smooth to shoot, with almost no recoil that it almost became boring to shoot, it was so accurate and smooth
@mikeyID Жыл бұрын
I own 2 apex bull pups. One in 9mm and one in 10mm. They are amazing !!!!! The best thing I’ve bought in the last 10 years. I would highly recommend getting one for your Glock.
@cd0130 Жыл бұрын
10 mm gang is goold
@Daybyday07 Жыл бұрын
Best company to buy one from or best website
@mikeyID Жыл бұрын
@@Daybyday07 I bought mine from the company. Great guys to deal with
@jordanestrin505 Жыл бұрын
I have a 10 mm im.looking into this wats the legality though? In comiefornistan...😢
@akpewpew4167 Жыл бұрын
Same here i got the psa version, but i wanna get it in 45 acp next but glock.
@cplhardcorps8156 Жыл бұрын
Mr. Noir, I would like to commend you and thank you for all your excellent content. Your commentary is clear, down-to-earth, insightful, and entertaining. Easy to see why you've been so successful. Keep up the great work!
@garrett892 Жыл бұрын
The barrel tilt on the 16" barrel would concern me for longevity of the pistol. Seems like it would cause some excessive stresses
@mikeyID Жыл бұрын
I’ve seen no wear because of the 16in barrel. It runs everything I load into it. It’s amazing. Best thing I’ve bought in years. It really works and is built with quality
@TransformersHoarder Жыл бұрын
Definitely more wear but on a Glock do you really care?
@sweetmeatnc1504 Жыл бұрын
@Mike Olson so how much they paying you mike? Youre pumpin this thing up an awful lot in quite a few comments.
@mikeyID Жыл бұрын
@@sweetmeatnc1504 nothing. I just fell in love with my 9mm Glock 17 apex. Then I found out they were making one for the Glock 20, 10mm. Don’t care if you believe me. It’s a legit system.
@rpmfreak9150 Жыл бұрын
@@sweetmeatnc1504 you asked before I had a chance!
@allenc4909 Жыл бұрын
Had my doubts watching the barrel tip moving so much, but that accuracy is on point.
@nawtympurtant4890 Жыл бұрын
That's simply how the Browning tilting barrel locking system works. It just looks exaggerated with the 16 inch barrel.
@dillonc7955 Жыл бұрын
I'm hoping they make a universal chassis system for more handguns one of these days. It would be interesting to see something like the Walther PDP which is literally made for an optic fit into a chassis for extra stability.
@denrizza Жыл бұрын
Make one for a 1911. 🤣
@katieneubaum4284 Жыл бұрын
Maaaan… I just picked up a 5” FS Walther PDP and that sounds AWESOME
@thebluestig2654 Жыл бұрын
@@denrizza Mech Tech Systems has been making PCC conversions for pistol frames for more than 20 years. They make them for 1911, Glock, and Springfield XDM.
@rogerhart5623 Жыл бұрын
I would bet even now Palomino State Armory is working on their own improved version of this for the gen 3
@milkyyanks765 Жыл бұрын
Won't it be better to simply make handgun into standalone pdw then? Like MP9,MP7 or so?
@SAFairley Жыл бұрын
A) How did I miss this review? B) That’s friggin cool. C) Thanks for keeping the reviews honest, Colion. When someone says, “At first I thought this was stupid. Then I [made it function].” I tend to credit the review more strongly.
@MThrow Жыл бұрын
First saw this on Military Arms Channel, great review Colion! Imagine this platform for the 10mm, that would be insane.
@notanotherstep Жыл бұрын
I had the exact same thought a glock 20 running some hot hollow points would be a sick home defense setup
@dixonbourne Жыл бұрын
Waiting for that!
@troy3456789 Жыл бұрын
@@notanotherstep ehhh, too much in my opinion. I'm thinking 9mm or .380 for home defense, so none of those well placed rounds pop out the other side of the unlucky home invader(s). 10mm HP are expensive right now too, makes practice expensive.
@mikeyID Жыл бұрын
They already make it for the Glock 20 in 10mm. I own it. It’s amazing 🔥👍🏼🔥👍🏼🔥
@troy3456789 Жыл бұрын
@@mikeyID Do a chrono on it?
@gephrygeph6480 Жыл бұрын
Yep, just ordered one for my G27. I initially bought the G27 for my backup gun 23+ years ago...when my department issued G22's. Now that we're carrying G17's, I have shelved my G27 and rarely shoot it because it sucks to shoot. Now, I have a way to shoot a gun I wouldn't otherwise. Excited to see how it shoots. Thanks for the great content!!
@3DRTY5 Жыл бұрын
Thats dope the fact it actually changes your barrel out!
@catdaddy2643 Жыл бұрын
Say nope to dope
@capokub7 ай бұрын
Meta Tactical is a fantastic company . I will absolutely champion their product and customer service after the experience I have had. They went above and beyond for me after another company absolutely left me holding the bag. In Meta Tactical and Colion, I do trust.
@ROOSTER333 Жыл бұрын
If they just put one more pistol underslung on the foregrip I'd be in.
@Saint_Wolf_ Жыл бұрын
Couldn't you do that with a pistol that has a rail or optics mount?
@MindBodySoulOk Жыл бұрын
Definitely, a poly 80
@ruststar Жыл бұрын
That would make the second pistol an SBR
@shawnsan9 Жыл бұрын
The ATF is going to take this away in a heartbeat. Get it while you can.
@richardle7469 Жыл бұрын
Not sbr. Has 16in barrel.. 16in pistol
@Charsept Жыл бұрын
I've always liked kits like this. I've been a fan of bullpups ever since I learned about them. My issue has always been the price. A kit for a gun costing more than the gun itself is a no go for me.
@jacksin3323 Жыл бұрын
You can 3d print stuff like this for about $20 in filament.
@JM-lk6wo Жыл бұрын
@@jacksin3323 a nice claim. Why not prove it?
@JohnBoyJoy Жыл бұрын
@@jacksin3323 except you will get the wish version
@jacksin3323 Жыл бұрын
@@JohnBoyJoy this is already wish quality. If youve never seen or shot a printed gun, you dont get to talk about them like you have.
@JohnBoyJoy Жыл бұрын
@@jacksin3323 great, go print one then
@nanaki-seto Жыл бұрын
you mentioned the trigger the truth is all bull pups are a little more mushy on the triggers Yeh they could technically beef up the metal in the linkage but at a cost of bulk and weight The mush comes from the bar running to the action (in this case trigger) flexing and to get rid of the flex you would need something 3+ times thicker you would also have more drag on the system friction etc that would make the trigger a heavier pull I think just spending time with the gun is what really matters the trigger feel is something you will adapt to
@mikeyID Жыл бұрын
The trigger is not bad at all. Overall it’s a great system for your Glock. I own 2, one in 9mm and one in 10mm. Both amazing setups
@charlesfritz7131 Жыл бұрын
They now have alloys that are stronger and stiffer that are thinner than what they use in them.
@kevinarmstrong5999 Жыл бұрын
A pushrod system such as f1 suspension or small block pushrods. A simple rocker change by order or order by ratio of sensitivity.
@jamess2263 Жыл бұрын
Purchased one about a month ago honestly I dedicated a handgun to it and don't really care to take my ARs out anymore. It's pretty accurate, very mobile, feels nice when shooting. Everyone comments on the barrel bounce, one it is a browning system they kinda do that and two how often are you standing next to your gun admiring the barrel when you shoot it? I am glad that someone like Colion Noir took time to review it really helped justify my purchase. Shipping times are a bit slow compared to other companies but end of the day I am super happy with my purchase.
@rivercityviews48 Жыл бұрын
Order one as well! Still waiting though 13 days later lol
@jamess2263 Жыл бұрын
@@rivercityviews48 I am sure after this video shipping time lines are now constrained. I ordered accessories about a week ago and no movement.
@RHI_Survival Жыл бұрын
I am so glad you showed the cheek shot 🤣 sorry for laughing. That is so good to know. This is such an awesome platform. Thank you so much for sharing!
@Overmotor Жыл бұрын
I love the practicality of something like this. Use the pistol as a ccw when out and about, in the car, and when at the range, and use the conversion kit for home defense (and also at the range).
@gimpsickle5806 Жыл бұрын
I love the design looks a lot like a phaser from Star Trek
@orlandoskipper589 Жыл бұрын
I was thinking Starship Troopers
@spartaninvirginia Жыл бұрын
@@orlandoskipper589 oddly, those are M14s with a fun kit slapped on them.
@daveufirst Жыл бұрын
Futuristic looks ugly.
@Non-Serviam300 Жыл бұрын
Seems like great accuracy even though you can see the end of the barrel jumping around after each shot.
@mikeyID Жыл бұрын
I own two of the apex pull pups. One in 9mm and one in 10mm. They are accurate, no joke. Best thing I’ve bought in years. I bought the first one for my Glock 17, 9mm. Loved it so much I bought one for my Glock 20, 10mm. I can fit it in my pack pack and it’s ready for bear country
@fullfire0 Жыл бұрын
The barrel jumps around because it tilts when the slide of the glock unlocks.
@skoparweaver7692 Жыл бұрын
@@fullfire0 exactly it has to move
@mcalixtro82 Жыл бұрын
u only own revolvers?
@mikeyID Жыл бұрын
@@mcalixtro82 ??
@drew_174rhodes55 ай бұрын
I havent purchased a Apex Kit yet but think i might for the simple fact it is a great way to get rifle style range practice without running $100 dollars per box of shells, 9mm is cheap and easy to come by and at the end of the day for most people in this market, its not going to be your only means of self defense, looks pretty cool and seems functional.
@allee6096 Жыл бұрын
"Engineers were so preoccupied with whether or not they could, they didn't stop to think if they should.."
@dixonbourne Жыл бұрын
😂
@mikeyID Жыл бұрын
I thought the same thing until I bought one for my Glock 17. Bro it’s amazing. Not like the other ones on the market for Glocks. This one is legit
@MrSolidsnake293 Жыл бұрын
these companies always make for glock what glock owners dont really give a damn about, most glock owners just want full auto and to eat their bowl of stale cardboard flakes like the freak they are... if this conversion were for another pistol it would have sold like hot cakes but now its competing with the micro roni the only advantage is barrel length and 9mm is maxed velocity with a 7" barrel anyway
@beargillium2369 Жыл бұрын
I don't understand how this isn't nfa.. not that I agree with nfa in ANY way but isn't this a shoulder fire pistol now?
@mikeyID Жыл бұрын
@@beargillium2369 it’s all legal to own. It’s a 16in barrel. Bull pups are very compact. My 9mm apex has 1800 rounds thru it. It hasn’t let me down with accuracy or reliability. I can’t say any bad about it.
@SuperVidtech Жыл бұрын
Received mine yesterday for my Glock 27 40cal Added pop up sights as well as my Holosun 508T. Very nice setup...
@walterbryan1798 Жыл бұрын
That's really cool. I like that. Time to look up prices! *looks up prices* Okay, so it's $500. You do get an entire 16" barrel, so that's a big part of the cost. Did anyone else see the barrel flailing around after each shot? I guess that's fine since he was still hitting the steel? I'd imagine the bullet is long gone by the time the slide snaps back and moves the barrel.
@shadowblade232 Жыл бұрын
The barrel moving is part of the Browning action, perfectly normal. It does negate any chance of suppression with this platform though.
@walterbryan1798 Жыл бұрын
@@shadowblade232 Roger that!
@jonathancastillo8526 Жыл бұрын
I purchased this half way through the video 😅 I fell in love at first sight. Bought the 2A plasti dip one.
@Fantastic_Mr_Fox Жыл бұрын
Just pointing out most 9mm ammo just isn't made for a 16 inch barrel, you're not getting that much extra juice from it. That being said there are specialty rounds that *are* optimized for longer barrels
@project86xero Жыл бұрын
I'd take it even further. Some ammo gains just enough extra velocity to create uncontrollable expansion and under penetration. With the exception of special pcc loads and 147 grain ammo. Which gains almost no velocity. So it still expands properly.
@kristopherleslie8343 Жыл бұрын
Can yal make the ammo you suggest
@Fantastic_Mr_Fox Жыл бұрын
@@kristopherleslie8343 there's a youtube video on the subject, it's in french though. I can link it if you want
@Jesses001 Жыл бұрын
Most 9mm gives you about 150 to 200 extra fps. That Underwood load I tested was about 300 fps being that they seem to cram the powder in that thing, ha.
@Fantastic_Mr_Fox Жыл бұрын
@@Jesses001 The vid I've seen the guy get 1000 joules out of standard P 9mm.
@boomerulman1564 Жыл бұрын
I have to tell you Colion , I do not normally comment on videos at all. I do know I watch a ton of KZbin…what I liked about this video. Is the part where your cheek got caught. Yes you looked a little silly. Yes, it looks very painful and number two I feel that you just showed your community that you’re a real down to earth person because that is 100% what I could possibly do or anyone else but a lot of people try to hide stuff if they make a mistake so hats off to you sir!!!!!!
@DefinitelyNotAFed4473 Жыл бұрын
Does this only work with 9mm, or do they have a 10mm (barrel)? This would be a really good kit for 10mm since 10mm packs more of a punch.
@mikeyID Жыл бұрын
They have a 10mm for the Glock 20. I own it. Bro it’s amazing and it’s compact. Fits in my pack pack. Perfect for bear or wolf country
@PrimarchBentley Жыл бұрын
Thanks for the review, it looks like a cool/fun chassis. As for "trigger snobs", well, usually they hiss and scurry off into the night at the mention of "bullpup" in the first place.
@hansvonmannschaft9062 Жыл бұрын
You put several shots on target at 50yrds with a G19. Congrats, Colion, you're now qualified to protect Indiana Malls from active shooters. On another hand, I'm quite interested to know what's the energy on target provided by the rifle-length barrel. I'd put my money on 90 to 115gr at most for the best results. Great vid, thank you!
@texas_stone_lets_go_brandon Жыл бұрын
Velocity will help answer the energy on target question.
@hansvonmannschaft9062 Жыл бұрын
@@texas_stone_lets_go_brandon That's right sir, it's one of the elements of the equation, and it'd be also interesting to know all numbers in the equation when using a 16" barrel, no doubt about it! On another hand, it's true, I asked for the final number, it's because I had many of the rather recently released (4-5yrs) and very popular PCC's in my head. Cheers!
@Tmay_ Жыл бұрын
I have been dubios about this platform with all the other tried and true options out there. After watching this video I am a believer, i think ill have to pick one of these up for my PSA dagger.
@aos7194 Жыл бұрын
Great TOY! I tried this out at my local gun club. Zeroed at 25yd perfectly using Monsturm Prism optic BlackBird with 2" groups using 124 gr X-Force ball ammo but 6" groups at 36yds and 8" groups at 50yds no wind. I had to zero at 36 yds per range rules in order to run our Pistol/Carbine course but wasn't able to get minimum 2" groups so this platform failed to meet our minimum range requirements, but it is fun to shoot but will not be my Biden ATF truck gun replacement. Hope this helps someone..
@cd4playa1245 Жыл бұрын
That seems to be the findings with all of these Glock SBRs is that they aren’t super accurate past 20-25 yards, and at that point why even use an SBR?
@Petefus Жыл бұрын
Cool addition to make your Glock more usable regarding accuracy. I would get one, but I bought my Glock 17 for less than what they are charging for the kit. Maybe $300, maybe, but not $500 or more. For that kind of money I would want it in something else, not all plastic.
@mrgrimreaper94 Жыл бұрын
Maybe put a barrel stabilizer cuz every time you shot that barrel was jumping didn't like that
@WaitWhatsMyName Жыл бұрын
Barrel stabilizer hahahahahahaha good joke.....i hope that was a joke atleast
@nyquillusdillwad91193 ай бұрын
That's the way the pistol is designed, many pistols do this, it's just exaggerated by the longer barrel. And it helps mitigate recoil IMO. You wouldn't want to get rid of it even if you could.
@ludovicdauphin2960 Жыл бұрын
Bullpup power !!!!!! I started to collect them in 12 gauge , 5.56 . Awesome !
@papirojo4228 Жыл бұрын
Would love to see this for the 5.7 pistols.
@brianbgood Жыл бұрын
Just bought the Ruger LC Carbine.. It’s friggen fantastic!
@smokingcrab2290 Жыл бұрын
Just get an ar57 upper
@Neogentronyx Жыл бұрын
Great video! The music was incredibly distracting however, and I kinda wish you did a velocity comparison pre to post conversion. I hope they acknowledge the cheek grabbing via engineering solution.
@robviousobviously5757 Жыл бұрын
it's wild watching the tilting barrel wiggle around... disturbing actually
@caliveteranOIF Жыл бұрын
Very annoying to me
@thejeremymotley Жыл бұрын
@@caliveteranOIF cant notice it while you shoot it so who cares
@caliveteranOIF Жыл бұрын
@@thejeremymotley Well I guess I do
@thejeremymotley Жыл бұрын
@@caliveteranOIF barrels pull back and down on most semi auto pistols, it's too fast to notice when not in slow -motion same with the conversion
@Danne1886 Жыл бұрын
Remember that scene from Lost In Space where he upgrades his pistol into a rifle?
@Supercharged1976 Жыл бұрын
That barrel hop is off the chain though...wow.
@youngc1mission Жыл бұрын
Yea is that supposed to happen? It’s weird because he didn’t miss one shot lol
@Badrecon336 ай бұрын
If you're talking about the barrel moving up and and down, that's the normal function of a Glock barrel since it tilts up in order for the cycling mechanism to function. It's the same here since the Glock pistol is the heart of the gun.
@stevehodgkins8801 Жыл бұрын
A lot of barrel movement on that one. But it looks intentional as that pistol slide has to move back and the barrel will naturally tilt to get the next round into battery. Still very fascinating. That this is consistently accurate at distance is impressive.
@Real_Richmond_510 Жыл бұрын
Hopefully they make a chassis for p80s also, and other platforms such as cz,hk, m&p, sig, Taurus, colt etc etc etc.....❤
@josephs4744 Жыл бұрын
They do go to the site
@Real_Richmond_510 Жыл бұрын
@@josephs4744 I did, nothing for cz, hk,.....
@josephs4744 Жыл бұрын
Just the p80
@Real_Richmond_510 Жыл бұрын
@Joseph S yeah I saw that, one of those will be coming soon. But for the hk would've been sick!
@cyberdrift1 Жыл бұрын
The 2 little tabs that hold the frame in and the extending stock looks like it will brake real easy . If they do something that would be beefier and repairable like an AR take down pin then it may be worth the $500
@The_Archer132 Жыл бұрын
Is the barrel supposed to move up and down inside the chassis frame like that? Seems like it would cause accuracy issues
@ericsfishingadventures4433 Жыл бұрын
It's meant to be that way. Military arms channel did a pretty good job explaining why. I thought the same thing but most people seem to be really surprised about the accuracy of it.
@heavyarmswing Жыл бұрын
consequence of using a tilting barrel pistol action. its fine since it will lock into the slide just like on a regular glock.
@Marcus2750-u1t Жыл бұрын
Yep it unlocks and tilts…. It affects nothing accuracy wise.
@stopitdad69 Жыл бұрын
he mentions it in the video. hes on target no problem at 50 yards and said you could be accurate to 100 yrds but its not gonna shoot 1 inch groups.
@richardhurlock4522 Жыл бұрын
@@ericsfishingadventures4433 Thanks
@figster41410 ай бұрын
I just got mine and set it up. For a G23. Is still light enough to shoot one handed with ease if needed. But with a 65 MOA reticle flip iron sights, flashligh/laser. Next I’m getting a couple drums as well 😂thing is sick.
@bodhim4353 Жыл бұрын
It would be really interesting to see a lightweight 9mm suppressor on this long barrel and see if it still works...
@wedgie502 Жыл бұрын
it doesnt. military arms channel did a test and it failed to cycle with a suppressor.
@WaitWhatsMyName Жыл бұрын
You couldnt figure out on your own a 16in barrel with a suppressor could never tilt like it needs to
@exgenica Жыл бұрын
Great video. It's a concept I had hoped to see some years ago. I was always concerned how the trigger linkage would feel. Generally however, *I would not recommend walking backwards* with a loaded weapon, especially when one isn't looking at the path for likely footing issues.
@davidmadison5582 Жыл бұрын
I guess you have balance issues or something. He's in a DIRT PIT. Obviously there was nothing behind him. He checked beforehand
@exgenica Жыл бұрын
@@davidmadison5582 My recommendation stands. Even a small-ish loose stone, or even a cartridge case, can completely trip one up no matter how good one's balance may be. Regardless of how perfect one thinks the surface behind them is, it's generally not a good idea to blindly walk backwards with a loaded firearm...even if recently eyeballed for objects that could trip one up. Dirt and leaf clutter can hide such things very well. edit: add ref to potential to trip on cartridge case
@ambivalentonion2620 Жыл бұрын
i always thought about making one of these, i know that a few bullpup pistol chassis systems were made in the uk that are fairly similair
@RodTerrellpoole Жыл бұрын
Again a company that made a great looking Right-handed option! What about us leftys out here!?! Lol
@PurestPosition Жыл бұрын
Become a righty
@robmiller5818 Жыл бұрын
As a fellow lefty I want it but damn don't wanna eat the brass
@panchopistola8298 Жыл бұрын
The world wasn’t made for us . . You could probably make a metal deflector to spit the brass down instead of up and out … and epoxy it in place .
@jakew383 Жыл бұрын
They need to make this for the canik tp9. I love my canik and I feel proficient with it but this just looks fun lol
@BoBro99 Жыл бұрын
This is sick.
@jacobgiles2268 Жыл бұрын
Who?
@tomasdelgado5233 Жыл бұрын
Hey man, I'm not sure if any of you are interested but if you cut off the beavertail of pi-x ar9 pistol grip it will fit, and give you a second mag holder. I put on mine and I love it, and in my opinion the grip is a better feel. If you're interested I recommend doing so I'm sure most won't be disappointed.
@SION8907 Жыл бұрын
This makes me want a glock now, just for this conversion kit
@mikeyID Жыл бұрын
I own 2 apex bull pups. You won’t regret buying one
@MrSolidsnake293 Жыл бұрын
throw that idea in the garbage and wait for a different handgun to have a conversion made for it. glocks ruin aiming due to their dumb grip angle
@mikeyID Жыл бұрын
@@MrSolidsnake293 no joke. It’s accurate and functions with no problems. I really am happy with both of mine.
@MrSolidsnake293 Жыл бұрын
@@mikeyID no problems for now... the barrel walking up and down is a clear sign of strain mechanically, if its anything like the micro roni its not going to be super durable for the cost...the cheek bite in the video made me shudder thinking as a kit designer The 16" barrel for 9mm is overkill when 7" barrel is the length 9mm was designed to be used in for max efficient velocity's and range. 16" is literal overkill for 9mm, if your trying to plink long range targets with a pistol caliber you're using the wrong tool.
@mikeyID Жыл бұрын
@@MrSolidsnake293 I’ve shot 1800 rounds thru my Glock 17 gen 3. I always clean it after each outing. I see nothing, no extra wear or anything weird happening to it. It’s a legit system for a Glock. I liked it so much I bought one for my Glock 20-10mm. I carry it in my back pack when I go fishing up in the mountains. Great firepower against bears, wolfs and mtn lions.
@erica.9431 Жыл бұрын
Dude, the whole video I was like "That's really cool BUT I'm concerned about it completely removing the Glock's trigger safety, and then you wait until the last minute of the video to mention there's a manual safety 😂
@mrobles661 Жыл бұрын
i like it! Only concern was that long ass barrel looks like it walks a bit after each shot! Might need some internal support!
@mikeyID Жыл бұрын
I’ve had no issues with accuracy or wear, function. It is a bad ass system. No BS.
@mrobles661 Жыл бұрын
@@mikeyID good to hear! Definitely looks awesome!
@WaitWhatsMyName Жыл бұрын
Support the barrel? It will cause it to jam smart guy
@mrobles661 Жыл бұрын
@@WaitWhatsMyName sorry even smarter guy
@WaitWhatsMyName Жыл бұрын
@@mrobles661 its cool, not everyone can have over an 80 IQ
@jimmydean8403 Жыл бұрын
I actually was considering meta and now a review by you is a sale point for me
@reliablethreat23 Жыл бұрын
I like that you don't really have to modify your Glock! Just remove the stock barrel and add the 16" one! I love it!
@markumoeder Жыл бұрын
A skeletonized,lighter and compactor form would be awesome do you have an automatic pistol that is compatible?
@fastlending Жыл бұрын
My MCK2.0 married to my G20SF with upgraded 3lb trigger, halosun 510, extended mag drop and two point sling kills this set up.
@Mirpurmad Жыл бұрын
have a look at 00:03:27 and onwards to see what I am talking about. the close up play of the extended barrel upwards while firing looks out of place. . although he is shooting on target but I wonder if the extended barrel could be retrained inside the frame without the upward play inside the frame.
@NotN8 Жыл бұрын
2:04 barrel wobbles, needs quite a bit of room to tilt that long barrel. Imagine the looks you'd get at the range with just the barrel no chassis 😁
@thejeremymotley Жыл бұрын
barrel moves because the pistol slide moves back and down
@lugoworks1512 Жыл бұрын
It's a cool little idea for Glock owners. I believe that's going to be the future of converting handguns into a carbine. You may laugh at this, but I have a High Point 4095. But it has the Hightower conversion kit, which makes it look like something out of Halo. The kit shaves a little weight off of the original rifle. And it makes it better for something for home-defense or truck gun.
@troypierce3562 Жыл бұрын
I seen this conversion a while back, but was a bit sceptical of the quality. I mean I love the concept, I just wasn't sure it was worth the price. Now after watching & listening to what you said about it I'll be inclined more inclined to shell out the money.
@bmac9936 Жыл бұрын
Have to wonder if this system would work with the rotary barrel Beretta PX4 guns? Concerned about the barrel mass not allowing proper cycling.
@jesterclown867 ай бұрын
See there's always a work around no matter what. This is a pretty good solution can't wait to see the 3rd or 4th gen of the meta tactical apex series.
@OldSolidSnake Жыл бұрын
0:54... really?? Felt like that, huh??😂😂 Keep it up bruh! Keep fighting the good fight for us!!! RESPECT!!!
@werre2 Жыл бұрын
in Finland you couldn't put on the long barrel - that's converting a short gun to a long gun. But the chassis itself is completely unregulated as long as it attaches and detaches without using tools.
@pippupaladin Жыл бұрын
I like seeing the tip of the barrel twitch whilst you unload it, I think they're happy to have you pressing their trigger.
@AbraCadabra619 Жыл бұрын
I wonder if the 16” barrel increases velocity or hinders it, more barrel = more velocity, but also more friction.
@SINGLESPEEDRIDER Жыл бұрын
A storage compartment for the original Glock barrel would be a nice add on to what looks like a very nice design. What the cheek bite something that could happen often?
@bryanstark324 Жыл бұрын
I've seen other reviews of this and yours was really good. Thanks!
@johnwarr1167 Жыл бұрын
Absolutely......LOVE IT. The platform looks very futuristic but very easy to use and versatile.
@jeff92k7 Жыл бұрын
Looks like a lot of fun. Wish they made one for a PDP.
@Vorpal_Wit Жыл бұрын
Is there any additional wear on the pistol from the 16" tilting-barrel? I would think there is additional torque/wear being applied to the contact points between receiver and barrel.
@seanbarsballe2427 Жыл бұрын
I did the HTA 90/22 for my 10/22. Same thought process, remove the stock from a 10/22, install it in a conversion kit that moves the actual trigger, bolt, barrel, etc back so it's now a bullpup with an 18" barrel (you can go as short as a 16.5" barrel and still be "legal" without an SBR tax stamp) just in a 22LR instead of a 9mm.
@inpalpatine2067 Жыл бұрын
Those repeat hits at 50 made me really happy. Laughing out loud for real
@jefffox8991 Жыл бұрын
How about a review of CAA's. MCK kit. Similar but not with a 16" barrel.they have models for several different brands of firearms
@williamsmith6 Жыл бұрын
Doesn’t the barrel move during firing, throwing off accuracy?
@rhinox0110 Жыл бұрын
I wish they made one of these kits that was compatible with the full size PSA Dagger, I've been thinking seriously about getting one of those after I shoot one first but they haven't opened their new location in MB yet.
@perryostrandar5328 Жыл бұрын
I didn't like the barrel jump is that a reduction for kickback or does it just not have a piece of plastic to push the barrel down when you fire the glock🐺
@HighclassAIM Жыл бұрын
That cheek footage was appreciated. Thanks for starting my morning with a laugh😂
@jokerred1090 Жыл бұрын
All questions I had about the platform answered! Thank you for the info
@miketyson8933 Жыл бұрын
NOW THATS A PISTOL CONVERSION i can actually rock!!!!!! I love it!!!!!! Looks expensive tho! Like the pistol lower hooks up to the Mech Tech barrel, but this looks really nice!!!!
@demetriusrussell3261 Жыл бұрын
being honest...when he started laughing...i just saw the price of the kit and started giggling like happy child. So far...i like it and will be looking into getting it.
@Shy_Knee_Side_Up Жыл бұрын
If you look closely there is a lot of vertical barrel movement up and down with each round. Think that might be a design flaw? That can’t be good for MOA.
@samkong2741 Жыл бұрын
I am wondering the barrel flips up 4:37 like that does not affect accuracy ?
@chazmartin8048 Жыл бұрын
0:55 - 1:00 is a perfect call for coyotes and such lol
@LordCannon7 ай бұрын
5:44 “Gettin Cheeky Are Ya?” Captain Price
@TheSLOShadow Жыл бұрын
Get us a muzzle velocity on that thing. I would like to know what 16” barrel does with powder burn
@richardgoodson8922 Жыл бұрын
That muzzle flipped though😂😂😂
@KingDarius45 Жыл бұрын
I was dying 😂😂😂😂 on that cheek situation
@JGcd001 Жыл бұрын
I wish something like this existed for the vp9 and the fnx45
@miketyson8933 Жыл бұрын
Mech Tech makes a 16 inch barrel that hooks up to your pistol lower which is cool. I hope that's a really long barrel. The military's .338 Norma machine gun barrel bounces but it does for recoil reduction
@morgans8178 Жыл бұрын
10:40 when you’re showing her how you make your ding Dong dance
@KB-py6jd Жыл бұрын
Been watching this guy for a long time. Very entertaining.
@operator1018 Жыл бұрын
You just gave these gangsters in Chicago, a great idea for their Glocks with switches. Great, a full auto .9mm Bullpup.
@NotAffiliated11 ай бұрын
I want to do this with a non-tilting barrel gun. That 16 inch barrel dancing around irks me. How cool would it be to have pistol for this but the extra barrel is a screw on barrel that's also a silencer.
@goforvendingtofu Жыл бұрын
So what makes this an improvement over picking up a used Tavor in 9mm?