The ZL1500 now has a full paddle shifted 10spd with rev match!

[@RidgeAZ520]

This is exactly what I want. Truck is so sick

[@BenFilley]

It’s pretty damn close to what I want. I want awd turbo with this trans. There’s a floor shifted, (I think) 6spd auto turbo awd on here somewhere but I’ll be damned if I can remember what the guys name is. The motor he says is good for 1500hp as it’s setup. Even if it’s “only” good for a grand, holy shit. Awd Silverado with 1k hp. Disgusting.

[@MrClean-tz3qz]

Looks so sick outside in the sun. What a beautiful truck Justin!

[@alonsovasquez4543]

Best obs in my opinion such an amazing build!

[@jimbaldridge9392]

I love the truck, I had a 92 that I bought right off the lot. Deep red, gray interior, I had the 5 speed, should of got a column shift, it was the "sport" model and it was a sharp looking truck. I had to sell it, help out the family at the time. Watching your videos has got me looking around for one. Keep it up, that truck is a rocket!! 👍😎🍺🍺

[@84chevyguy1]

Man I bought a 92 when I was 19. I swapped in the interior from a 95, lowered it and swapped in a built a 496 and TH400. Man I loved that truck, but at 21 I became a father, somethingI wasn’t ready for and had to sell it. I’ve had other builds since then, but I’ll always miss that one the most

[@minitrucker04]

Truck just gets better and better. This is one my favorite builds of urs along with the old c7

[@p2020-z9q]

That obs is freaking clean dude!

[@Baker3939]

Now that's BAD ASS!!!

[@zebulonstampfler9117]

Awesome Justin! Gonna snag a shirt! Thanks again for putting out these awesome videos. Excited to see more of that TRX

[@peteg9396]

Need to set the paddles up so when you pull both of them back it drops into neutral to rev the engine, or when you pull both paddles back it acts as a 2 step for launching. Nice build!!!

[@christopherchavira2948]

Awesome build glad to see the paddle shifter in with the column shifter❤️👍🏼🔥😎

[@frankmaddera203]

I see this truck everyday to work. It’s so beautiful

[@Micah-kbluezr]

Mind blowing truck justin! Kudos on this stellar build up. Excited for the next build.

[@autoconversion2410]

hi mate.. Nice vedio.. im doing the same thing with 6l80e.. did you connect the PCS moduel blue wire to 6l80e pin7..? im bit confuse.. also how do you get in to sports mode.. just tap the down shift while in D posision..? thanks for the help

[@bikeguy0]

Were u able to get this working?

[@mikewalker713]

Okay love the truck but the Saleen on the lift in the back in the begging of the video is gorgeous.

[@Inmate73]

Mint!!! I love it, keep the videos coming!

[@freeman8572]

"BAD ASS" calling from Southern California. Sweet !!!!

[@LSX_SPOOKES187]

Dream build 🔥 this truck is sickkk

[@sheldonstewart70]

That has to be the best , most fun driving obs in existence so far . Ordered the wife and myself a ZL1500 shirt plus I ordered me a Killer performance shirt . When's the next obs build start ?

[@StangkilrProductions]

Very soon!!

[@StangkilrProductions]

Get you a bad a$$ ZL1500 shirt while supplies last!

[@pulpo.r7790]

Awesome truck. Literally my dream truck 🛻. You guys built the ultimate truck. Wouldn’t change nothing on that bad boy.

[@thisoldhooptie]

Buddy of mine g Naron on here has a paddle shift setup similar to that. Pretty bad ass, gotta get that ac back in for the win!

[@JNVZ-10]

Badass obs🔥🔥🔥

[@shadowopsairman1583]

1987-1995 GMT400

[@jarronbovinich4460]

Man one day when I have enough money, i want yall to build me one just like that. Killer setup!🙌🏼🙌🏼

[@StangkilrProductions]

Let me know

[@jameslocklear3231]

Dude tell me how much and I will bring my truck one day

[@jameslocklear3231]

I was looking for this comment

[@dalehall2993]

@@StangkilrProductions Will you pick it up from 7 states over and load up all the nos parts and more parts,and then of course more parts??

[@gsmith207]

F ya! You guys are badass! Nice build man! Wow! Truck badass too! 🍻 cheers to the new paddles rev match! Sofakingcool!

[@joshjammer5716]

Bro badass! Hope I see this thing smashing shit on the streets.

[@octaviotorres5361]

Now that’s a dream truck

[@snooka2484]

Hell yeah, that is beautiful!

[@crlsx6038]

Brought a z1500 shirt 🔥

[@StangkilrProductions]

Its on the way!! Thank you.

[@moyltx]

Perfect keep em coming

[@chi_kustom_garage3409]

beautiful truck. I have a question Im doing the same setup in a 87 box chevy and was wondering what gear ratio did you go with on the rear end I hope you can help ....

[@ahberlowkz852]

Watch the full build vid I'm sure he mentions it

[@mikewilson6906]

My son rocky says you should have a gear selection display and I agree please make corrections thank you in advance! Lol awesome build

[@392Cherokee]

Those paddle shifters are slick! You don’t need a sign outside your business just look at the parking lot 🤣

[@henrywells5971]

That thing I'd sick love it

[@Silvergoatdc4]

All i can react with when i see the truck is 😍😍😍😍😍😍😍😍😍😍😍😍😍

[@noquemacuh3845]

Bad ass bro great job on truck.👊💯

[@adammoore5686]

If or when you do zr1500. You should do zr1 door panel and seats to complete the look. Just something different than the other obs out there. Not that there is many lt5 obs trucks out there though if at all.

[@JacksonOffroad25]

I’m in love 🥰🥰🥰

[@Gym-bars-cars]

Cleanest build on KZbin easy!!! I’m buying a shirt

[@freedomfox8183]

That's a little extreme but definitely the best obs and it's a beautiful

[@nonameisthename138]

@@freedomfox8183 Well, he's not that far from the truth.🤷‍♂️ I mean who else has one with the attention to detail, and did what he's done or better?? Now he's added paddle shifters, I don't know any OBS truck with them. Correct me if I'm wrong, and I'll stand corrected. 👍💯

[@Jpt01amr]

Does it make since to buy something like this for a 4l80? Just a 5 speed

[@brandonbarbre2]

Man what beautiful truck

[@murderous_ogpr3dator803]

Can I get a link to those paddle shifters

[@2muchBoost_]

Great work....a well thought out build....SOOO what`s next

[@StangkilrProductions]

Another one

[@synseer8484]

Huge fan of what's been done here!!!!! Best of 21' thus far!!!!!

[@dalehall2993]

Another goal is too test the 160mph Dakota digital speedometer👀👍🏻

[@jeffstanley2324]

I have a 97 obs with l86 8l90 can you share where you purchased the paddle shifter

[@rolandcarrasco2717]

Not really up to date on watching the videos, they just popped in on my recommended but nice truck and great work I have the same model just a ‘91 step side! By any chance though will y’all be making any more of the shirts in a size Large?

[@thesquarebodyc1098]

Does your Dakota Digital Gauges display the gear selection with the paddle shifter?

[@FisFis86]

Was wondering the same thing

[@Lozano.22]

Where can i buy those paddle shifters and harness?

[@dalehall2993]

Psi conversion

[@dogsubx2]

such a badass truck!

[@matthewbrown1760]

Can you give the name of the paddle shift company?

[@Shiftheads]

The say that ten speed shifts faster than pdk. Awesome job

[@RafaelCarrero-n9l]

I'm installing a LAS with a 6L90 I'm having a problem with the shift linkage I cant seem to find anything they sell to use my original shifter any ideas

[@StangkilrProductions]

Lokar makes a kit

[@RafaelCarrero-n9l]

@@StangkilrProductions Thank you

[@TheChevy0523]

What a Beauty what brand the steering wheel

[@cwilliams855]

Who makes those paddles?

[@malibuced9560]

Hey I have a 2019 ss Camaro set up putting it n a 78 Malibu lt with 10speed Tran how can I do tha Paddle shifter

[@alanhale6494]

I would love to see a build on a procharged 540 cubic inch Big Block and 10 speed automatic

[@RaceGasSmellsGood]

Mind if I ask who makes the paddle shifter setup? Badass!

[@MrJayo73]

Not sure who is the actual manufacturer is but zero gravity performance has them for about $550 which I think is the cheapest I found them for my 6l90e

[@RaceGasSmellsGood]

@@MrJayo73 Thanks for the info!

[@ze_german2921]

Does Holley support this 10 Speed trans yet? I like the Terminator X platform for tuning the engine.

[@Jm4c93]

Is there a way to get a gear indicator to work with the gauges?

[@dillonoliver27]

Where did you get that shifter from?

[@zombietruckergarage3753]

Where’d you get the paddle shifters from? I’m doing a similar build with my c10

[@thinbluelinemustang372]

I'm in love!

[@mikebryant1524]

CAN U TELL ME THE WHEEL AND TIRE SIZE ON THE GREEN TRUCK PLEASE SIR

[@andrewschmidt9421]

Who makes that paddle shifter kit? I would love that in my 71 C10.

[@jasonelliott5079]

That's what I want to do to my truck. Would be pretty awesome if you could do launch control like the new vette

[@jonlindsey2882]

Will a 10spd automatic work on a 351w

[@1969camaro]

Dude I want to shirt ASAP how can I get it

[@freddycazares6093]

DANG

[@Alteca1995]

Does the rack and pinion have slop or does it feel tight?

[@StangkilrProductions]

Feels right

[@miklosdrops7820]

What lights are those ?

[@alextynan930]

Did you have a car show outside your shop today ? Lol I saw some people and the truck while going to oak grove 😂

[@StangkilrProductions]

Sure did lol

[@ste_v1983]

Damn how many obs trucks do you have??

[@crisworkizer]

Send me the info on the shirt and hat not coming up on my page Thanks. Thats a bad ass truck.

[@Usmc913]

What shows are tomorrow in KC?

[@Ondstockz06]

Anybody know the brand of paddle shifters they used ??

[@codyzellner]

Holy shit I didn't know Nick Swardson was into Chevy Trucks!

[@shadowopsairman1583]

Now if we can get a 8L90/10L90 behind the Gen3&4 SBC (LS) LR4/LM7/LQ4/9, LY2, LY6 etc in GMT800

[@MICLANTECUTLI]

How much have you put into it

[@cooperaldrige]

What shows will you be at?

[@TheRvg03gt]

Is that a 4 eye Saleen in the background??

[@StangkilrProductions]

Yes 1985 super clean and rare

[@cannonfeet]

I want to do this on my 6L90 swapped LSA Nova. Is that a PCS paddle?

[@StangkilrProductions]

It is!

[@cannonfeet]

@@StangkilrProductions I thought that the PCS could do all of the controlling. What difference did the Speartech make?

[@StangkilrProductions]

@@cannonfeet I just bought it through Speartech

[@Jpt01amr]

Who makes that steering wheel boss ?

[@StangkilrProductions]

Billet Specialties

[@drewchilton487]

What would be your number to get rid of it? Not interested just curious

[@nonameisthename138]

🤣🤣🤣🤣 Since it's over 100k in it, you can probably start after that!

[@taryrai2300]

Hi , just wondering how you got it to rev match ? Any mods to the tranny to make it happen ?

[@StangkilrProductions]

It’s in the factory ECU when commanded to tap shift

[@taryrai2300]

@@StangkilrProductions oh damn. You aren’t running a different Trans controller

[@taryrai2300]

What stall are you running

[@davidgon1068]

What drop kit does it have?

[@davidgon1068]

Or what drop you recommend for a obs

[@TheSportzjunky]

Can Stop by a drool over this thing if it's in the parking lot or is that not cool?

[@fegimar1pinoliar478]

Badass!!!

[@LawzyDog]

What is the paint code???

[@donaldbitsinnie8088]

Chevy power 🔥

[@NewStart1o1]

I wonder could U have paddle shifters if U have like a racecar popp off steering wheel 🤔🤔🤔

[@manuelortega3935]

I wonder how much all of this cost . PLZ let me know

[@BigfootGarage98]

When you get the ZR1500 done I want to see you take it to Pennsylvania and race Mike (streetspeed717) with his ZR1

[@StangkilrProductions]

I can do that!

[@fernybalderas9337]

Who sell them??

[@XxbrandonxX234]

I want this truck so bad lol 😅

[@SHOOTSHOW00]

Whats the 60-130 on the ZL1500?

[@StangkilrProductions]

Not sure yet. If i were to guess mid 5’s

[@ste_v1983]

You should over haul the interior and make it brand new too.

[@StangkilrProductions]

Hell it is new! Lol. Honesty you can go out and buy an interior. You can’t just go out and buy a perfect original interior.

[@ste_v1983]

@@StangkilrProductions yea it's very clean not saying that but I mean like zl1 seats and stuff like that. Like a 2000's style just like you did the suspension the engine bay and all that stuff. That entire truck is a camero other than the interior.

[@spawn9765]

wow 😍😍🙌👌👌👌

[@donnieperrine2180]

Who made the gauge cluster?

[@StangkilrProductions]

Dakota Digital

[@donnieperrine2180]

Was there a specific stock number? I’ve 2 89 trucks n I definitely like that cluster

[@RGarcia0205]

This fucking 🛻 is dope!!!!

[@luiscuevas2064]

Color code ? please

[@madeinnola]

That’s🔥