Never Backlash your Fishing Reel With This ONE SIMPLE HACK! Surf Fishing Tips

I am gonna show you how to make this simple surf fishing and long casting adjustment that will eliminate any backlash! This is how to install and modify any conventional reel!

[@texasfortytwo]

Another option would be to epoxy stainless steel washers to the frame . The neo magnets can be attached / removed from the washers allowing you to return to "non-magged" state "if" desired. Could also experiment with polarity of the magnet sets if using 2 or more like you did.

[@BeachBomberFishing]

I was gonna do that, but I doubt I would want a 'non-magged' version. The washer trick works, that's how a lot of people do it. They also do the +-+- polarity, but the way I did it worked very well.

[@fishingwithfoxxxy1371]

​@BeachBomberFishing wonder if it would would on a avet

[@texasfortytwo]

@@BeachBomberFishing Yep, absolutely . Might still be useful in tuning ie. adding / removing individual magnets depending on line , weight . I'm gonna try this on my saltist 30 once the weather gets better.

[@BeachBomberFishing]

Give it a shot bro, you are right about the tuning aspect. Thanks for watching and let me know what results you get.

[@texasfortytwo]

Performed this mod on a saltist 30 that was a bit unruly . One strong 12 mm neo magnet from home Depot on the gear side assembly (not the clicker side unlike other reels) was all that it took to control this reel. Had to improvise a bit to clear the ribs though (I expoxied a weak 2 or 3 mm thick magnet as a spacer to clear the ribs on the sideplate .. and the strong magnet attached to the weak magnet ..this would not be needed if if had been able to find a strong 10mm neo magnet locally). Threw a 4 oz weight 150 yards into the water with no drama. Thanks again !

[@sonnyeast3862]

Great video amigo.Can I ask what size magnet and where you can find those? Thanks!

[@FISHWITHAPRO]

Very informative.

[@sethlewis705]

This is great news.to see.because I've always thumb.draged my spool.to keep from bird nesting my line.thanks so much for the infro bro.keep.it coming.i watch you daily.Godbless you

[@user-dv7hb2sc9m]

My last post I shared w/ you how I had this problem many yrs ago & that it led me to never use bait-cast again. I know you saw my post & TY for this "FiX". Say hi to the family. peace

[@BeachBomberFishing]

Try this out, I think it would greatly help

[@paultrevino274]

Thanks for all the tips just goty okuma 8k reel..an I can cast it 100 yards easy

[@BeachBomberFishing]

Awesome purchase!! You'll love that reel!

[@jaaron2834]

Nice & Simple Mag…! I still like to have a knobby mag even though the static mag is covert and cool AF…! Nice video ! 🤙😎👍🤗

[@BeachBomberFishing]

Knobby is better since you can adjust when needed for sure.

[@jaaron2834]

@@BeachBomberFishing I’ve seen how this mag system is done … just didn’t know it was called a static mag … either way it’s better than no mag at all… Now that I’ve thought about it… I have quite a few reels to mag ….going to make good use of my drill press …🤙😎🤙

[@swimking101]

Great video, im going to mag my saltist 20.

[@BeachBomberFishing]

That would be sick man

[@RIDETHESUNSHINE]

Great Video! Try a piece of old leather belt instead of the surgurgal tube. The width of the belt makes it easier to "Thumb". The legendary Lefty Kreh used the belt trick on his Pflueger fly reels as a drag when fighting Tarpon, and such from spooling him. Please Be Well, and Stay Strong, Will

[@BeachBomberFishing]

I might try that to see how that feels! Thanks for the advice!

[@RIDETHESUNSHINE]

Best of Luck! Will 👍😎@@BeachBomberFishing

[@mosquitofleetfishing6599]

I want to try this as well, the only issue is that the leather has to be maintained to stay supple. Surgical tubing doesn’t.

[@RIDETHESUNSHINE]

Having used the piece of leather belt on some of my older fly reels in saltwater I would hit the leather with a shot of Armor All, no big thing. However, you have to use what you believe will work best for you! Please Be Well, and Best of Luck in all things, Will @@mosquitofleetfishing6599

[@joshuafigueroa6]

I have a penn 310 GTI with mags Had it done back in 1999😊 Wow I'm old lol😅

[@BeachBomberFishing]

Lmao wow, I haven't heard that name in awhile lol

[@motokenzo763]

So you can teach an old dogg new tricks! First time I've seen this! I was aware of diamagnetism and how it works... Thx 🤠

[@christopherromina5445]

I have the okuma SS baitcasting reel, it had a line counter,when I got it, didn't know it didn't have magnetic, I couldn't cast it like a normal baitcasting reel with magnetic, so I wanted to know if that would work on that reel I have, and the magnetic u used what was the strength of it. Please let me know thanks

[@Ca.ctsv2]

Great informative video! does that gearbox on that daiwa sha bother you when casting?

[@BeachBomberFishing]

Not at all

[@Ca.ctsv2]

Awesome thank you for the reply

[@waterwalker1467]

How fast do y’all run your fishing reels? I’ve got a couple Akios F15 Nitrons & I run them somewhere around 8-10 seconds if the wind allows. The best investment as far as distance casting is concerned should be on casting technique; brute force & a bait caster make for a long day.

[@tamimahmed1169]

Nice.... What kind of magnets are these?

[@emptypockets9187]

I’ll give a tip for the daiwa saltist and saltiga reels. Glue the mags on the plate the side the reel side. Put the mags on the side the spool is on and it has like slots you can put them. It’s way more effective.

[@saxon6]

Would this work on old Penns? Squidderor Surfmaster. Definitely looking into it. Gotta up my conventional game

[@BeachBomberFishing]

Those reels should work well magged.

[@magicworldbyjorg]

[@smithrangel5493]

What knot do you use to tie your mono to mono ?

[@ericwisniewski5651]

Awesome

[@BeachBomberFishing]

Thanks!!

[@robertlopez9323]

I have a daiwa seagate 30 and it hardly bird nest with no magnets it definitely has my avet raptors beat in distance actually secound gear on my avet which is a low gear ratio feels the same smoothest on my daiwa with its fast gear ratio which i was surprised

[@BeachBomberFishing]

Avets are good reels, the spool is just so heavy.

[@azharabdulrahman7803]

One question, how can a magnet affect an aluminum part? (Aluminum spool)

[@tamimahmed1169]

What size magnets are those?

[@christopherromina5445]

Cool

[@vasco74vet59]

Hello, what is the measurement of the magnets in millimeters of diameter and thickness?

[@BeachBomberFishing]

10x3mm

[@vasco74vet59]

@@BeachBomberFishing thank you

[@c.b.2838]

What is that black line you have on the reel?

[@BeachBomberFishing]

30lb kastking

[@c.b.2838]

@@BeachBomberFishing thanks bro you the realist!

[@nielslarsen863]

Statmag as we call it,if you got to much magnet power,you simply put a small piece of tape over the magnets,thats reduce the magnet force .🎣😉

[@BeachBomberFishing]

Great idea, I can remove the top magnet on this reel. I only cemented the bottom one.

[@mackattack8983]

Where do we get those magnets

[@darrendeases6433]

Where do you purchase the magnets ?

[@BeachBomberFishing]

Amazon neodymium rare earth magnets 10×3mm

[@amblo51]

What size were your magnets

[@BeachBomberFishing]

10×3mm

[@amblo51]

@@BeachBomberFishing good to know, thanks!

[@Wildstyle_]

Do u have a reel that has just monofilament line on there ?

[@BeachBomberFishing]

This reel and the spinning reel I'm about to review and drop the video at 7

[@abelvalle6188]

Damn reel whisperer is 🤯

[@BeachBomberFishing]

Lmao reel whisperer

[@abelvalle6188]

@BeachBomberFishing what it say to you? Mine says " f you, undo this nest"

[@anotheryoutuber2463]

this!

[@BeachBomberFishing]

Hope this video helps!!

[@lfaktore]

Mag a non mc avet.. for science... and cuz when my avets came out, mc was not an option..or existed at the time 😂

[@BeachBomberFishing]

You must have the avets that say AVET really big on the side plate huh

[@lfaktore]

​​@BeachBomberFishing correct.. my pops handed em down to me..smallest reels I could mag..the senator 114h was mag'd back in the day along with the jig master 500

[@nielslarsen863]

I learned how to cast 200 yards by following Tommy Farmers casting tutorial her on KZbin i can highly recoment his advices

[@BeachBomberFishing]

🤣🤣🤣🤣🤣

[@BeachBomberFishing]

He is a good one for sure

[@AlexRamirez-vz1vj]

I started watching and immediately started casting 1000yds... Now pier fishermend hate me...

[@BeachBomberFishing]

🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@5.7hemi.713]

I rather js get an other avet mc 😂😂😂

[@BeachBomberFishing]

Mags on that reel suck tbh 🤣💀

[@5.7hemi.713]

@@BeachBomberFishing yeah sealines aint dat good and the 1s avet used are good enough not to backlash. I really like the casting control on the accurates 600w tho