Triple Turbo Cummins Wins Sledpull Ultimate Callout Challenge 2019 Recap

[@theglitch99]

Everything about what you guys do is impressive!!

[@prestonschultz3076]

Did you say 212psi??!! I've never heard a number that high. I would truly love to see what this machine can actually do when everything holds up properly! Very fun channel to whatch!

[@markbrodis5554]

My thoughts exactly, I'm new to the extreme turbo world but sweet mother that's a lot of boost!

[@billwalter9917]

I'm probably wrong here, but he may have been talking about fuel pressure.

[@petr0rabbit]

@@billwalter9917 they confirmed it, 210psi on the dyno and 150psi at the sled pull

[@jameswhitehead6758]

Compound or triple turbos run super high boost.

[@cs-gj3yf]

super stock tractors run upwards of 400 psi

[@blondeguy08]

Thank you taking the time to make these videos. Much appreciated for those who can’t be there!

[@RadDadisRad]

Lol, competed at UCC in running but untested truck and finished 3rd overall. Some will call that luck, pretty sure that it was skill and hard work. Great job!

[@fredschupner6948]

When all the bugs are worked out, you guys have the best machine I've seen. Fixed ( BUILT ) a new cam gear no more slippage, the pump issue part of racing, easily fixed... I'm excited for the 2020 video.... Great job, great channel I am hooked!!

[@cwal4570]

Clicked so fast. 1 view 1 like. Been waiting for the next UCC video all day

[@Toomanyprojects1993]

Just the fact that you put down over 2000hp with a 12v and mechanical injection is amazing. Keep it up y’all!

[@1stdriftkid]

I can not wait till the day you guys get this truck sorted and hope you don’t stop till you! do will be untouchable. Worst bit is waiting a year each time to see going again!! 🤣🤣

[@BUILTDIESELMAFIA]

I've watched a crap ton of pulling and your setup is the craziest coolest on earth I'm telling you love to see this pull! Need to hit another pull with this beast somewhere some time!

[@bayouboattrash]

Third overall AND you didn't blow it up!!!!! Congratulations y'all!!!!

[@shaunwhitmore1997]

3rd spot with a 4 banger! Good work man!

[@ericmillier6652]

Thanks for taking the time to film so much! It makes me feel like I was there and one of the team. Congratulations on third place! That's a real accomplishment and it's still together!

[@cod4maniac100]

Absolutely love the stories in y'alls videos. Matched with the great editing and videography, this is for sure the best diesel performance channel on youtube.

[@jasonminhinnick5188]

Dang man third overall ain’t no joke. I can’t wait to see what you guys throw down next year.

[@brandonb8543]

Congrats crew! You all should be proud!! So glad you guys got a podium, last year broke my heart. Im not even a diesel guy but i can certainly appreciate everything you guys did and continue to do!

[@jkuri89]

You guys should be proud of the work you all put into great costumer service, the time you guys put into making all these videos explaining how your product works and installs, taking the time to show us some dynamometer runs to give us DIY guys some base numbers and potential power expectations with certain add ons. NO other company does things like PDD and that is something to be proud about!!!

[@mikewiebe4734]

Can you imagine what they’d be capable of with the truck/engine dialled? So excited for you guys!

[@NIGHTLAMP12345678]

You have such a positive attitude to your racing.....what a great thing as you seem to se no bad in any thing.....I hope some of your positive energy rubs off....great drive and great team. I hope you do well

[@timdrutowski2910]

Thanks again for the invite had a great time! hopefully you guy's decide to go next year so I can come help out again!

[@marcushert2759]

You guys have to go back next year! That's the only reason I went! We know the truck is very capable for the #1 spot

[@ScottKenny1978]

Well done, guys! Remember, if you ain't breaking parts, you ain't racing! Hoping to see 1st place next year along with you!

[@dustinlowry9075]

You guys are awesome love the truck and love the videos. Every time I watch your videos I get excited to see that truck run and the upgrades. Keep good work your doing a great job. SHOUT out from California

[@gafrers]

Big Congratulations for the 3rd place. Wish you the best for the future. Keep up the amazing job with the videos as well.

[@clancytaylor7714]

I've waited for this video all year. Great job on 3rd place guys. Love your channel and stay mechanical 12v!!!!!!!!!!!!

[@idahobuckaroo8348]

What a cool story. Thanks for sharing. Impressive win for sure considering all the challenges you and your entire team had to over come with the engine failures. Nice job!

[@bulldozer7656]

Sweet! I didn't see the results until After I watched your video. Great job Todd, Will and crew. Your hard work played off. I'm glad your back!!

[@nathanlaumer7480]

Way to go 3rd over all is great yall getting ready to order a new trans and pump from you guys

[@RedmistAU]

Once again, I applaud your team. Such a reliability increase since last year. Well Done gentlemen.

[@bilson2997]

congratulations guys! i really enjoyed this series, i hope you guys decide to compete again.

[@bdjm8595]

Wow, third place is fantastic, a fun two part series !!!!

[@mikestrucks]

I’m so happy for you guys !!! You really deserve it and I wish you all the best for the future 💪🏆

[@charliebardo6255]

Awesome video 👍 love knowing all the backstory. Over 200 psi boost is insane 😎 you guys are the best. Dialing that monster in will be a first place for sure. Every video I've seen of the sled pulling yours sounds the best and definitely a good good pull

[@scaryperson27]

I have a stock rebuild pump built by Seth Ferrel when he worked for a company (can't remember the name). He does a good job. I was thinking of having it reworked at some point when I start going at the truck doing mods etc. Good job guys, I know you seem to have issues with keeping the truck together but you really go for broke. Things happen when you push the envelope but you're making progress!

[@davidwitcher5443]

I know it's all luck but Dammit, if the timing didn't slip and the DV pop out PDD would have taken home the top spot on the podium! Mechanical Mafia for the win!!!

[@justinlienhoop4478]

Awesome job to the entire mechanical mafia team. I was there the whole weekend in the rain just to see this truck get down and it was great cant wait to see it again

[@MrWalkerds]

Really hope you guys go back and bring home the win next year! From 8th last year to 3rd this year to 1st next year!

[@jeffh6971]

Congratulations PDD Team! That sled pull was awesome! Especially now knowing yall were down a cylinder. Haha

[@InterestingEndeavors]

Yes! Awesome work guys. Next year is winner winner chicken dinner. Get it while the gettin's good. Setup is getting sorted out!

[@jaredfarney675]

I cheated and watched UCC coverage on built diesel mafia channel. I was super pumped when you locked second and the truck didn't bounce, so I knew it was going to pull over 300ft. what I didn't know was that you had a hole out. you guys need to go back next year, for sure. I really enjoy the series on rebuilding the truck and all the detail you guys put into your videos. keep it up!

[@LoganFK]

You guys are just great, keep it up, you don't know how much support you have. respect!

[@pastblast1664]

"You made a Ford make a thousand Horsepower! That's great but not in this competition." Priceless! Made me chuckle.

[@gmjason75]

You & Will HAVE to compete next year!!! NO QUESTION!!! Now that the MMCRK (Mechanical Mafias Common Rail Killa') is all in one piece and properly broke in, time to spend the next year finely tuning in the BEAST and getting a strong handle on its potential!!! That's a #1 truck all day guys. You couldn't have asked for a better outcome with no test hits of any kind and going into nearly every event BLIND because of your timing constraints of building the rig. Your truck will be the one to beat next year for sure 🤘😎🤘 CRK's !!!!!💪✊

[@1-Six-dee]

Congrats man I am happy for yall, yall built a bad ass truck and I can't imagine what it will do when it is dialed in

[@bennygarcia9710]

So pumped for y'all. What's next??

[@AntiPattern328]

That is insane all the pressures you guys deal with in a diesel. I've never heard of anything blowing out fuel lines, shredding timing bolts, 200# of boost, crazy cylinder pressures....

[@cs-gj3yf]

diesel super stock pulling tractors run 400 psi of boost, making around 5500hp

[@greendodge98]

Great job guys. You are and will always be winner's in my book!

[@robertosoma8483]

Great effort guys, truly a testament of your skills and tenacity!!! AWESOME

[@adamm74]

Great job guys! Got plenty of truck to practice with over the summer

[@tervez]

That was a clean pull

[@jcethel3495]

Great work all around! I can't even imagine how hard you thrashed for UCC and continue to do to push the envelope. Congrats on 3rd place finish and looking for Mechanical Mafia to take first next year.

[@roboinsb]

Was rooting for you guys.... Congrats! Well done!

[@BrokeDown724]

Awesome guys! Keep up the good work!

[@mystycim]

Awesome job guys! Been cheering for you entire time waiting for the info on who did what!

[@aaronhamming972]

I love the stuff you guys do! Just makes my sad when I walk out and look at my stock Duramax that doesn't make 2000hp

[@kevinmonseler3592]

Great job guys even with all the problems......that's what makes it. I forsee first place next year!!

[@Techangler65]

Great show and congratulations on a well deserved third place guys

[@jayssonchurch7724]

Amazing attitude gentlemen!! Awesome videos!!

[@pddofficial]

Thanks so much!

[@pancakes7529]

What an awesome ucc story! If you guys can spend the year dialing in that truck and get some more seat time in it. The 1st spot is as good as yours next year. Also love the content and the channel, always look forward to watching the new episodes and... I drive a Duramax.. might swap a 12v in it when it breaks the crank..lol

[@CJE2007.5]

Congrats on 3rd especially since day 1 turned out kinda shitty. Really enjoy your channel. Thank you all for sharing with us

[@jamespenner1412]

So happy for you guys, now u have some time to get some seat time to improve on your setup. Cant wait for ucc2020!!

[@thehappytexan]

Congrats you guys! Y’all make progress every year. I have no doubts PDD will be number 1 in 2020 or 2021. Depends on how crazy your combo is next year. Lol.

[@kimjones308]

You guys gotta keep going! Win on Sunday sell on Monday. That truck is dirt nasty!

[@smallblockfuelie]

Congratulations. That looks like you had fun.

[@andrewsavage140]

Great job guys. Are you gonna make the mechanical mafia stickers available?

[@colonelk3000]

Would totally buy one of these

[@burnsuego]

Yes! Make them available, but check credentials to make sure only 12v owners can buy them!

[@jdiojustdigitout6557]

You can hear when the pump failed... Great job.

[@bernhard8540]

Gotta tig weld everything that came apart so next time you'll have all your cylinders hahaha awesome guys I love seeing pdd slamming horsepower

[@gunz_n_bikes171]

Gotta say i love your guyses products never been non satisfied and i really love your guyses build very uniqe and nothings more bad ass than 3 turbos on a 12v

[@pddofficial]

Awesome! Thanks, couldn't agree more with the turbos!

[@garycraig4277]

We’ll see you next year oh wait I guess I won’t moving to Alaska but will still be watching your videos I have learned a lot from you all

[@sethmoore6565]

That thing looks badass as a pulling truck

[@michaeltuckerman6983]

You guys rock you're all winners every time

Oh man, i would love to see this truck doing all this work in person ! Congrats to the mechanical mafia team ! My favorite team in UCC. Greetings from Chile !

[@nephron9924]

Man I can't wait to see this thing back in action! Great job guys! Looking forward to forking over heaps of cash when I come to yall for my fummins excursion build.

[@rubikrawler]

Third overall is nothing to sneeze at. Looking for a win next year!

[@JPMotorhead1993]

Awesome work guys. Congrats!

[@mikethecarpenter6977]

If you would have had a test pass you would have probably won the event. I would give it another shot!

[@demon39063]

Really enjoyed the story, thanks for making this

[@someguy325es]

Awesome work guys!

[@markrich3271]

dude that truck is awesome! Congrats.

[@jonsimmons3507]

Congrats guys,that's awesome!

[@mike2191958]

One day it will all go well look out when it does.

[@ridingwiththereids]

Hell yeah!! It's awesome to sell all of the hard work you guys put in paid off👌👌 Glad to see you placed on the podium this year! Long live the Godfather 👍👍

[@davidspeyers]

Awesome, loved the update!

[@mcjrzeus]

Your guys are awesome keep up the good work

[@woos31]

Hell yeah guys! Still get goosebumps watching this

[@jon570]

You guys make such awesome videos. You deserve ten times as many subs as you have. Hopefully you take that invite and smash the competition next year.

[@aaroncrow7411]

Good job guys!

[@raulescobar1362]

you guys are awesome! that was incredible!

[@bcbloc02]

I prefer the Haisley/Scheid style P7100Hub to the Kenny's. I have had lots of problems with the little bolt that sets the timing getting broke in different applications which tells me it is slipping even with big flat washers and tight torques. On the Scheid style it has to cut a 3/8 bolt in two plus slip the other 5 bolts for it to move. I have never had that happen even running 18mm P8600's. Not saying it can't but so far so good!

[@jeremymcnicol9585]

Have to go back next year. So much left on the table. Test and tune this beast. Then let her eat next year

[@Thepriest39]

So much work to get there for a short amount of fun and stress. It’s what it’s all about.

[@Burnenbrighter]

Great job!

[@Marine450x]

I just have to post & say these are now my all time favorite KZbin vids, so much better then the faux drama of so many of the supposed reality TV shows! BTW, I have a slightly modified 24v 5.9, I totally get the "power" one feels when the torque is working. I have a heavy truck and do a fair amount to elevation climbs at speed on tight mountain roads. Also my dad has a 12v that puts my 24v to shame. Far and away the funnest & most exhilarating engine I've ever driven, including my 1liter trackday bike. (BTW, I'm in the StG area, I've got to come up and see ya'll. I've got an '07 6.7 I need tuned up ;)

[@brentruss2168]

Well done!

[@deathninja007]

You guys were amazing to watch! 👍

[@_Steve0h_]

Cant wait to start my build. Ive got a mint 97 with a 5 speed deemed the grandpa truck aka Lucille. Ill be reaching out to yall fersure.

[@wesleytruax2469]

Would have won every event if things would have worked as they should. You need to do a dyno pull at your shop with everything working and see how close to that 3000 hp you can get.

[@luisalmestica9530]

I love the truck so much

[@dannichols7342]

Man I'm extremely excited for next year's event.

[@dbagwell71]

I love your videos and I don't mind the ads that much but back to back ads to start a video is that really needed? Keep up the good work just needed a little vent.

[@keithrindt7488]

Good job congratulations