The New Kenworth Is Put To Work!

[@hollywd269]

The squiggly light try holding down on the tc button sometimes that works if you haven't already tried that.

[@billferris5292]

Both of those trucks are beautiful, you took great care of the older one.

[@TheBostonTrucker]

Thank you Bill

[@steveeazy18]

I can't get over how much the red tanks and little details add to the great looks of the new truck! Congratulations on a great job 👊☘️

[@bryantorres4716]

I love the wheelbase 😍. Not short, not too long either. Just perfect.

[@TheBostonTrucker]

We agree!

[@bryantorres4716]

@@TheBostonTrucker 230 inch ?

[@cmm3338]

@@bryantorres4716 looks like it. or 234

[@michaeldalzell6670]

I love both of Ur KW’s, but totally love the paint an upgrades on the new one

[@Maxnar10]

not usually a huge fan of painted tanks or full fenders on the drives but i love both of them on this gal. not a single thing i’d change

[@TheBostonTrucker]

That makes me feel good thanks

[@chrisharkins8708]

Glad you finally got the new KW out on the road working it. So many nice touches you did to it. Steering wheel and shifter knob just to name a few.

[@TheBostonTrucker]

Thanks 😊 👍

[@robdixon945]

Thanks for the show Mike 🍻

[@TheBostonTrucker]

You bet Rob

[@cmm3338]

beautiful rigs sir. Love that twin stick. As far as the light goes: traction control light, will want to get it looked at when ya can but not critical. More than likely just a sensor somewhere. Great shifting there, always like to see the correct angles when entering the gear, and patience.. Something even good drivers get wrong and you greased it.

[@lostrailbeds8289]

Both KW's look amazing! (but, being an old rusty crusty guy I'd be happier to see an old R Model with road grime covering her every pore of existence!!!) Haha! That's just me.......great job Mike!

[@TheBostonTrucker]

Thanks brother 🙂

[@eddieweigel9490]

I’m with you my brother I love my Bulldog Mack’s nothing like a scarred up old R or DM model Mack 😂 😂

[@crazy71176]

Its your traction control. Push down on the TC button you have there it may help the truck with wheel spin.

[@roberthaycock8400]

I like the tanks and lights on the bottom of the tanks better on the old truck otherwise I think the new truck looks way better. Congrats hope you enjoy it.

[@TheBostonTrucker]

Fair enough!

[@daleyhanson5889]

That tarp blowing fuses etc, makes me remember the fith wheel not grounding and my trailer lights blinking off and on,,? Bad ground can be hard to find,,😅

[@TheBostonTrucker]

We checked the ground too, I hate coincidences that don't make any sense.

[@MarkWilson-hh3ck]

Love the new truck she is beautiful. The light is trailer ABS it should some on for a couple seconds when you step on the brakes and go right off. It's a DOT violation if that light is on. The bumping up the idle thing is important because with burner trucks idling in very bad they build soot and plug the filter faster. Which means more regens. Unless it's really hot or really cold it's best just to shut it off and save a whole lot of problems down the road. Trust me I have lots of experience with burner trucks good luck with her I know you will get all the bugs worked out of her

[@TheBostonTrucker]

Thank you

[@dalefildes3347]

Definitely like the new one from top to bottom. Done just right

[@TheBostonTrucker]

Much appreciated 😊

[@digthisnz1943]

Looks really good Mike.

[@cCueBasE]

You spec’d the whopper out beautifully. Gonna look even better with the lowboy behind it.

[@TheBostonTrucker]

Thank you

[@kevincampbell8105]

Mike Considering all other drivers that pound pavement and concrete all day, and they don’t get an opportunity to spec out their own truck, speaks accolades about who you are and all your blood, soap, and polishing you do for your bosses, you deserve to be able to have this tractor, A class act all the way around, and doing videos Good friend of Doug C here, I work over at the same company he does. ✅

[@TheBostonTrucker]

Oh man thank you so much for your thoughtfulness.

[@mizzo_beeto]

GREAT COMPLEMENT 👍

[@robertlockhart73]

You can bring the idle down by turning cruise off and holding resume switch down for a few seconds.

[@TheBostonTrucker]

Okay thanks

[@raymondbradley6788]

Mike, I love your new truck👍👍👍 the only disadvantage I can see is the steering radius. That’s got to be annoying. When you used to be able to make a turn now you can’t.

[@TheBostonTrucker]

Hopefully when it comes back from the dealer it'll turn a little better.

[@aaronwhitesr9245]

Congratulations Mike you deserve it count yourself lucky having a boss who lets a company driver spec out a tractor that doesn’t happen to often enjoy .

[@TheBostonTrucker]

Very true, thank you.

[@Red379pete]

New truck looks great. That visor fits the truck perfectly.

[@TheBostonTrucker]

Thanks 😁👍

[@paulgriffiths8359]

WOW, for those that have been following you for years, just go back and see what you first started with at Cardillo's, a R model Mack on loan and steel trailer if my memory is correct Enjoy the new ride, you've come a long way and deserve it, well done

[@TheBostonTrucker]

Wow, thank you! Yes you are right about that! 💯👏😊

[@pointingdog7235]

Don’t take it wrong. The KW is a beautiful rig. I have a soft spot in my heart for the Super Dog tho. I remember when a neighbor friend bought his first tractor in 76. It was a 72 R-600 Mack that had been a Chemical-Leman tractor. He would bring it home on weekends and haul chemicals around the Northeast. I would always help him out with the maintenance he had to get done on weekends. Then in the summer of 83 he was in Connecticut and the engine decided it was time to go. He sold the Mack to someone that needed to use it for parts. I have to say that at 18 years old I was in mourning for the old Mack. He ended up with a nearly new Binder next, that was a big step up in comfort to make longer runs. But I still have fond memories of that R Model. The best of luck with the new KW. Be safe.

[@TheBostonTrucker]

Thank you, we all have a tender spot for those old Macks!

[@michaeldalzell6670]

I think 🤔 Ur trailer is tellin ya wants to stay with the ol truck.. they have a history together

[@Snowbird_89]

That light with the car and squiggly lines is the traction control

[@TheBostonTrucker]

💯

[@joehelbok8184]

It is the stability control not traction control we have it on our trucks mechanic with a computer can turn it off

[@nyaz1749]

I like the visor on the new truck better.

[@TheBostonTrucker]

Me too 😁

[@jesset061084]

That’s the traction control light in the dash Mike 😊

[@TheBostonTrucker]

👌💯

[@anthonyp7546]

I was told by a mechanic that Kenworth is inconsistent with setting the steering turning radius. Where I work we have a fleet of t880’s and a handful of them don’t turn very well. And some will turn one direction better than the other.

[@classicxl]

After watching you have to back up 3-4 times just to make the turn around the building at the yard it’s going to really suck come winter time . Depending where you guys put the snow piles that longer wheel base is going to be a pia

[@TheBostonTrucker]

True but it ends up being the steering box was broken from the factory, it's at Kenworth getting a new one which takes about a week to get in. 😔

[@TheBostonTrucker]

It's still not going to turn much better.

[@JeremyBurnette-g1u]

Mikey. Thanks for your hard work making these videos. Your new truck is a stud horse. Ride easy amigo.

[@TheBostonTrucker]

Will do thank you

[@andrewraimondo6215]

Awesome ride man, congrats! Looks great! Love those tanks. Will definitely miss the old truck though, spent a lot of time watching it.

[@TheBostonTrucker]

Thanks for your thoughtfulness.

[@andrewraimondo6215]

Thank you for providing a lot of great content for so long. My son who’s now 7 really enjoy watching you!

[@damienodonohue1327]

The one with out the drop visor!!👍

[@TheBostonTrucker]

👍👍

[@mikeglenn9800]

Let us know how you cured the stack problem. Our KW's do it also. Spot mirror on the dash. Truck looks great, thanks for the video Mike.

[@TheBostonTrucker]

The bottom bracket behind the stack cover was loose.

[@mpaqman285]

So nice to finally see the truck out in the wild serving its intended purpose. Had some ideas for the truck, Not sure how you feel about front mud flaps on the bumper, I think it would look good. If your allowed to drive with the tow hooks in the front bumper, two polished hooks would look nice against the red mount and polished bumper. Laminate flooring that looks like red stained cherry wood. Hidden chicken lights under the cab at the top and bottom of your steps. For the trailer I think she needs a little piece of stainless with a few ambers in it for in front of your trailer axles, and then longer front flaps on the axles. I would expect the new truck to drive more like a Caddy vrs the old girl. You can tell right away there's a lot more sound deadening as you don't have to talk as loud in this truck.

[@TheBostonTrucker]

Love some of the ideas!

[@jessemerriam9732]

Looking good mike truck look s awsome got to them to hook up the other stack ...

[@wilfredsexton2823]

I like the flat glass better looking great don't over do it Love your video's man

[@TheBostonTrucker]

Glad you like 😁😊

[@stevec2569]

The stack on my truck kept turning like yours when it was new. I came from a 2000 kw to the 2018 kw and hated it at first cause the truck was so damn quiet, but now i love it, I'm sure you will too

[@TheBostonTrucker]

I already love it 😁

[@stevec2569]

@@TheBostonTrucker how do you like the stryker cb? Is the talk back good? Have you tried the rf power level

[@winslowcarr7187]

I”ve been using a plantronics for years, love it.

[@TheBostonTrucker]

❤️💯👍

[@dft28740]

I like em both Mike be safe out there

[@WP_3rd]

Congrats! I'll take the old one.

[@TheBostonTrucker]

It's all yours 😉

[@jerryaltadonna5462]

afternoon Mike just caught the video it's looking AWESOME stay safe pal

[@TheBostonTrucker]

Thanks Jerry

[@Albertalorian]

Love the truck Mike, Congrats! When it comes to the steering, have your guys check thrust angle of the rear axles, and front toe on the alignment. We had 2 new KW's at my last outfit that wouldn't turn at all. After and MD Alignment and getting all 3 axles set right, both turned much better. Volvo's seem to have this issue also as of late, factory alignment specs are WIDE and can ruin a new truck.

[@TheBostonTrucker]

Thanks for the tip, it's at Kenworth now so I'm hoping they get it right.

[@trevorjohnston9504]

The car with the swiggly lines is the traction control in a car if it stays on all the time there is a problem and they advise you to take it to the dealer it should only be on if you turn the traction control off

[@moondog3162]

I see a good number of these new trucks the stack turning..... luckily mine never has....it did on one of our trucks and mechanic drilled small hole at bottom, behind guard, and put a screw in it.....🤷🏻‍♂️......it works

[@TheBostonTrucker]

Well hopefully it's all good now but that's a good idea.

[@timothyfredericks8193]

Have your mechanics adjust the steering stops on the steering box. We did on ours and it turns a lot better

[@TheBostonTrucker]

We did that.

[@joelincoln3529]

make sure they take the squigly icon on the dash also!!! good bluck mike.

[@TheBostonTrucker]

💯👍😁

[@faustinodriver7714]

I love the old one cause it's already broken in, know how your truck runs etc..But new truck is nice..

[@TheBostonTrucker]

Thank you

[@RobertBrown-lf2wn]

the truck looks good when you’re driving it brad

[@Graveltrucking]

We have an 07 T800 tandem dump my truck is a 91 T450 tandem. My truck steers on a dime. Turns I can make with my truck the T800 doesn't. I've gotten used to the T800 making turns in 2-3 shots where my truck is one turn. My truck is 16 inches shorter in the wheelbase. Kenworths don't steer well period. The Sterling LT9500 I drove has a 240 wheelbase it turns tighter than the T800 with 234 wheel base. Is the fifth wheel on your new truck low profile. It looks like there is a possibility the frame tails on your truck could get hung up in the frame rails of your trailer when you are breaking over angle on a decent.

[@victorserao7180]

That’s when you lose traction. That’s what time is the light. If you have a switch to shut that off, I did it on your steering wheel on the dashboard somewhere.

[@TheBostonTrucker]

Thank you

[@GhettoWagon]

The seats look nice. I need a dual armrest truck seat to make a PC chair out of. Screw that regen stuff.. Too many trucks on the side of the road probably doing that when they go in limp mode

[@TheBostonTrucker]

10-4

[@raymondbradley6788]

Mike, you think as much as that truck cost that stack would not be moving around like that. There is something obviously wrong there. Yes, that is totally annoying. I feel you brother👍👍👍

[@TheBostonTrucker]

Yes I would. 😐 It's good now.

[@aaronymker614]

That truck looks so good Mike.

[@TheBostonTrucker]

Thank you

[@jamesmoore8269]

Mike- The new truck looks great. They all come with a few glitches. Get used to those whirring noises when you shut it off. No more coal. JM

[@TheBostonTrucker]

Thank you

[@sammapes1216]

On the new truck. You're not putting your logo on the back of cab like the old truck. New truck looks amazing. Good for u. Keep up the awesome job.

[@TheBostonTrucker]

It probably will go on eventually.

[@walterwright7896]

😱 old school, missing the stick already. The automatic drive ok to drive but l find they shift out of sequence and ride brakes to control the truck. The more axles the better.

[@TheBostonTrucker]

I drive a stick.

[@nickd.4512]

Don't let go of the old iron I'm telling ya. I ran a 22 western star with the new cummins. At 175k she's in the shop for the 2nd time in 5 days runnin. Emissions is the culprit. Now im runnin an 07 cat. While both mt sleepers are in the shop. My 09 went down 2 weeks ago in ohio when the 2nd turbo self destructed

[@billneedham9652]

Looks great Mike . You can’t always be backing up on the turn , some day you won’t see that clown that sits hidden Happen to me what a surprise 73.

[@TheBostonTrucker]

Yes exactly, it's a maneuver I always try and avoid.

[@thomasweida2881]

Like the new truck but my favorite is the black Mack they sold.

[@TheBostonTrucker]

Me too!

[@DaveDunehew-e1f]

Mike, I love the interior color of your new truck, I was very hesitant at first on the white buttons but after watching the video I will admit they are growing on me. KW has an awesome looking interior, Peterbilt, maybe second to KW. There is a lot you can do to the interior of a Peterbilt if you got deep pockets. Sorry to hear about your stack, that would be irritating to say the least. Great video, T Y for the ride along. Oh, maybe put straight pipes on the new truck would ease your mind. Have a great day. Dave D. from Maine.

[@JMACK1]

Looking good 👍

[@TheBostonTrucker]

Thank you

[@barnettdaniel]

(Music City here) Looking sharp!! I’ll be in your neck of the woods all week in Foxborough. That deck plate looks great. With those SWR I wouldn’t touch anything- that’s peak performance for sure as it sits.

[@TheBostonTrucker]

I'll keep my eye out for you.

[@vickyhenley-hunter]

I thought you should do each wip individually when checking the swr?

[@MrBostonrobb]

Beautiful truck, Mike. Prefer the polished tanks vs the painted tanks but that's not for me to say. Either way it's a gorgeous beast!

[@TheBostonTrucker]

Fair enough!

[@ericproulx4615]

Painted rear fenders would have been the icing on the cake 👍🏻

[@TheBostonTrucker]

Next time!

[@georgewilson1184]

The only thing missing on the new W900 is Elephant ears next to the breathers

[@TheBostonTrucker]

I didn't want them on this one.

[@chrismcintyre182]

the radio looks like a heartbeat the ekg

[@TheBostonTrucker]

🤣🤣

[@robertfranki5477]

Sheering in the new truck is harder because of the length of the truck itself or is the steering slower to move about?

[@jonmarchand-vp6wc]

The Lowest swr is 1.1 so your good to go Mike. LETS GO

[@TheBostonTrucker]

10-4 👍💯

[@RCTBandit]

Kenworth steering boxes are set however from the manufacturer of them, we have a 21, 22, and 25 t800, my 21 turns like Titanic, the 22 turns like a 6 wheeler, the 25 slightly worse then the 22, suspension shop said when they do the 3 axle alignment on the 21 they'll adjust the boxes (we run dual boxes) And the high idle for Regen, its loading up motor to get the exhaust hot(1000*+ most regens happen at 1400*) its annoying, especially with the automatic transmission Trucks looking good, saw it at gear jammer, only to realize you were just behind me walking around the show😂 Also idk about your w900 radio but the t800 with touchscreen, you can hook up the Bluetooth from your phone and it'll read your texts, tell you who's calling and play all your audio(music, Instagram reels, and whatnot)

[@TheBostonTrucker]

That's cool thanks for all the tips and tricks. We adjusted the stops on the steering but the dealer can set the poppets a little wider so we'll see if it gets better if not I'll just roll with it no big deal.

[@RCTBandit]

@@TheBostonTrucker the joys of learning the quirks of new trucks, i know when i tow with the 25 im always cutting to sharp cause it turns better😆

[@Jason-Hicks]

I think it’d look good on the dash.

[@bush600r2]

Both look great Mike but i really do like the look of the newer one a bit more i think. What model was to older one? Does it have slightly more slanted and shorter hood than the new one? We don't have that model KW down under is why i ask

[@TheBostonTrucker]

They're actually the same model, W900L. Glad to like it!

[@nathanrippy3219]

Besides, that truck looks amazing

[@TheBostonTrucker]

We agree!

[@chrisstoddard1144]

I'd have stuck with the shorter wheelbase. What does the longer one gain you?

[@TheBostonTrucker]

Longer wheelbase gains me nothing but it looks cool and that's all that really matters! 🤦

[@jeffreymartin8031]

Hey Boston trucker how are you doing today my friend I love watching your KZbin videos they are very educational videos and keep up the good work and I like the content in the videos sweetheart and I do miss the old truck it is not the same with out it I know that you are getting you ues it

[@TheBostonTrucker]

Hang in there with me.

[@Jason-Hicks]

Do they have a W900 logo that’ll fit where the clock was supposed to go? Or could you find someone to make the Cardillo AC logo on a sticker that’ll fit there? The steering wheel and shifter knob ties in well with the white buttons. Also I like the brake buttons. And I noticed the you took the port window cover off. Looks better without it. 👍

[@TheBostonTrucker]

Thanks Jason, I like the AC idea

[@Jeffsmodelgarage]

Hey Mike been watching your vids for a few years and I’ve Neva commented but I gotta say the new ride looks great just fyi I’ve been driving for 32 years doing heavy haul and dump and flatbed

[@TheBostonTrucker]

I appreciate that! Means a lot in to me so thank you and be safe out there.

[@Jeffsmodelgarage]

@@TheBostonTrucker thanks you too and I’ll comment more often ✌️

[@nickhehir7414]

After thought was that the cummins dealer in brockton where you left your truck i seen our mixer sitting there 51 ive driven that truck its similar to mine its been having problems with the def system such a pain in the ass to deal with my truck unfortunately has been down there alot to sat down there for a month for issues

[@TheBostonTrucker]

This is just what we have to deal with these days I guess.

[@peanut_trucker]

That light on your speedometer is your front end, every one of our low riders that are bagged have that light on. We turn it off and it comes back on. They told us when you idle the truck up the DPF system doesn't work and plugs the filter up. Who knows I guess ask a cummins man that's who told us. Definitely get the stops turned in because these new ones are worse turning truck I ever drove. These new ones definitely rattle ALOT. Tgey don't build them like thry use too. She looks good bud happy trails. P. S. Don't forget I have the headset pictures 😅

[@TheBostonTrucker]

Thanks Chris 😁

[@andrewwheeler5283]

I don’t know if this has anything to do with it, but maybe try shutting that cruise switch off unless you’re using cruise. Dash lights won’t come on, we have a 2015 KW T800 and for whatever reason if you leave the cruise switch on all the time it will start throwing dash lights on that have nothing to do with cruise.

[@thomaskirk9341]

I'm liking the new ride better, but for myself I'd do the T990 for the bigger cab. I'm a big guy, a bit over 6'6" and 215lbs with a size 13.5 shoe and I need that extra space. The standard cab just feels a bit claustrophobic for me, but I guess I'm the exception rather than the rule.

[@TheBostonTrucker]

I almost got the 990 actually but I thought it was to big for our back yard but I get it, I'm a lot smaller so I just fit.

[@thomaskirk9341]

@@TheBostonTrucker Honestly, the 2 most comfortable tractors for me personally have been the Peterbilt 567 and the Western Star 49X. The legroom and extra space to recline the seatback a bit more make all the difference. I guess they're finally understanding they need to make the daycabs fit bigger guys better.💪

[@MrSizewise]

Congratulations Mike Question What is the black stick on the right of the steering wheel? Opposite of the turn signals.

[@MrSizewise]

Says not used for brake?

[@TheBostonTrucker]

Hand brake for the trailer.

[@MrSizewise]

@@TheBostonTrucker do you every use it to save the brakes on the truck?

[@TheBostonTrucker]

All the time at red lights and when I'm stopped on a hill.

[@MrSizewise]

@@TheBostonTrucker thanks for the information. Keep the videos coming!

[@matkremzar5474]

Your definitely a gear jammer mike !! Good job.

[@TheBostonTrucker]

Thanks 👍

[@davidklauer3422]

Finally! Good to see it working

[@TheBostonTrucker]

Yeah 👍

[@roberthaycock8400]

We ran into that with the stack turning. Is it the dummy stack? Once we hooked both stacks up and added a rubber piece under the clamp at the top coming out of the muffler it stopped turning. Not sure if it was the vibration or if it was the air going into the bottom of the dummy stack honestly but either way it stopped and I was happy..lol

[@TheBostonTrucker]

It was the working stack.

[@ryanmello1735]

Tape a watch into the spot where the clock is supposed to be 😂

[@TheBostonTrucker]

🤣🤣🤣

[@ronthompson3525]

Nice truck Mike. In my humble opinion it’s to nice to work construction. It’s a long haul truck a nice blacktop princess 😂

[@TheBostonTrucker]

Right on 👌😐😊

[@danielyelle1070]

New is nice but from my personal experience I HATE EMISSION ENGINES. So I have to go with your old truck . It still is funny that only your right side exhaust stack blows smoke. Left side is just for looks . But you will get use to check engine lights. Good luck with your new ride . Looks get . Have a great week.

[@TheBostonTrucker]

Understand

[@tater_relocater]

Face of happiness 😵‍💫

[@TheBostonTrucker]

🤣🤣🤣🤣

[@DDyke]

Boston Trucker great video. My thoughts on what I think you should put in at missing gauge, is a beautiful picture of a love one. Maybe a picture of your dad, daughter, or wife epoxy covered so it last a long time. I think that would be great. Safe travels.

[@TheBostonTrucker]

Great idea

[@christrella3134]

For shts and giggles put a picture of Anthony in there. Tell him, "" Now you can watch me all the time "! Maybe Tony's picture.

[@andytindogeckford2778]

There’s only one Boston Trucker and there will only ever be One original Boston Trucker KW.shame you couldn’t keep her for showing Mike🤔👍

[@TheBostonTrucker]

👌💯

[@Landonwarren-xj1gt]

Love the new truck

[@TheBostonTrucker]

Thank you me too

[@Nascar14F1]

Love the truck. Is it me or the new truck steering wheel turned 10 degrees to the right to drive straight? My new tractor was the same from the factory? $100,000 plus thousand tractor custom built from the factory should be straight as an arrow. Could be wrong.

[@eddieweigel9490]

Looks great Mike what gearbox does it have 13 or 18 spd

[@TheBostonTrucker]

18 speed

[@jasonmacmaster1100]

You could always tilt the whips forward, I know you've thought about it!😅

[@TheBostonTrucker]

I'm trying to avoid that.

[@JrFlexing909]

Every now and then got to keep the motor in the other KW flowing a little bit so it does not sit to long.

[@RobertBrown-lf2wn]

Boston trucker this is brad your new truck looks great brad

[@TheBostonTrucker]

Thanks 👍

[@bigneil8888]

It looks bloody good

[@TheBostonTrucker]

Thank you

[@georgewilson1184]

You should enjoy this don’t sweat little details that don’t matter your living a dream Wee Man that the majority of us will never Know

[@TheBostonTrucker]

Thanks George

[@frankpeavy4538]

No DPF.... Have to stick with the old one. But the new one looks awesome.