2007-2012 Nissan Sentra Spark Plug Change

In this video I show you how to change the spark plugs on your 2007-2012 Nissan Sentra. Comment below if you have any questions!
Footage may be slightly grainy as the heat was messing with the camera optics.
Music:
Unwritten Stories - One Day

[@tinadriggers8399]

Thank you for sharing your video. I'm a girl and with ur help was able to do this job. They wanted to charge $225. Also realized my intake hose had dry rotted. My car is running great now.Thanks again!

[@charlesball9472]

Zzz

[@nathandiaz3742]

Finally a girl admits that they need a mans help to do something lol jk jk 😂😂

[@AllBrightColors]

How long did it take you to do it? I an dreading having to take all this stuff apart just to change the plugs. A mechanic quoted me $100 to do it.

[@AllBrightColors]

@@nathandiaz3742 dumb comment. My MOM taught me how to do my tune ups and oil changes. I changed my alternator ON MY OWN. NO males involved

[@nerdzinsync8274]

Only $225? That sounds way better than the $830 my dealer was trying to charge me. I decided to just do it myself after that price.

[@HectorJ.32]

Thank you bro you saved me 800 bucks and my wife gave me some Damn I'm feeling blessed!

[@Only1Kato]

😂😂😂😂 boy u a fool

[@Jayyhavinit]

😭😭😭😭

[@smoore6995]

thank you for the video . upon my own research of trying to find out why the vehicle was hesitating upon acceleration , it was said that one of the problems could be the spark plugs or ignition coils. your video showed me how to replace them both rather than taking it to a shop which would have been hundreds of dollars just for labor . THE PROBLEM WAS FIXED!!!. It was worth it.

[@jessec11]

Thanks for the video, it help me out so much. I had problems, because 2 of the bolts on the intake manifold were on there really tight and I ended up rounding the heads, had to buy some grip-tite sockets, but other than that, this video was super helpful. I had to change all the ignition coils and spark plugs. The mechanic wanted way too much. Just wanted to say thanks, I really appreciate it, you saved me a bunch of money.

[@davisdondada]

exactly the problem i’m having my socket just keeps sliding off the bolt i’ve been trying to change them for months i don’t k ow how to get it and don’t have $500 for someone else to do it

[@jessec11]

@@davisdondada I bought these Grip-Tite sockets at my local car parts, the helped me out, I bought both the metric and the SAE sets. Hopefully it helps you out. m.northerntool.com/shop/tools/product_200810185_200810185

[@pens87668]

What a pain in the ass this was to do. I was able to get everything taken apart, but putting the intake manifold back on was a hassle. When I first took it off, I had kept the bracket in the back on because I couldn’t get the bolt to break free. So I loosened up the screw above it instead. Only when putting it back on did I realize it needed to come off. Ended up having my buddy come over to give some suggestions. He took a hammer, smacked the bracket, and in doing so, it broke loose. Thankfully the dealer had a couple in stock for $1.50 a piece. Aside from that, my intake hose had to be replaced because it was all dry rotted. So roughly $130 all together. $36 for the plugs, $15 for a new gasket to the intake manifold and throttle body, and $82 for the air intake hose. Now for tips when doing this: DO NOT mess with cleaning the throttle body on this because it’s an electronic throttle body. Should you do this, you might throw it off, and have to have the throttle body relearn the idle. Sure it’s a simple process (Search: Nissan throttle body idle on KZbin), but unless you want to fight with it, I’d advise against it. I cleaned my mine, and got a SES light. The code I got was P0507, which is for high idle. This trips when idle is atleast 200 over the standard 700+50 r/min. Now I did not have to relearn mine as I simply removed the battery cables for 10 mins to clear, and my idle is to normal. Another tip is, if your air intake hose is cracked or dry rotted, make SURE you have the correct one. On some of them, they have a hole for a small hose to sit on. This hose is so the transmission can breathe. So don’t be fooled by price. Pay attention to details like that. My car is a 2012 Nissan Sentra SL 2.0 engine.

[@johnyomtov7514]

Brett Nesbitt after watching this video f#ck that the car is running fine so I’m not going to mess with it Nissan has a lot of balls designing the car like that I did my wife’s Rogue was so easy 15 minutes but a different engine 2.5 L no excuse for this one I never seen anything like that I could do it but give me a break you are basically taking off almost the top half of the engine just to change the plugs ! maybe later when I feel more motivated I’ll give it a shot but till then the car is fine so don’t fix what isn’t broken (79k miles)

[@pens87668]

John Yomtov Honestly just do it when you reach the 90k-100k range. I did mine at 95k. Yes it’s a pain in the ass, but I don’t plan on ever taking this apart to do again in the future. Just one time thing I hope.

[@johnyomtov7514]

Brett Nesbitt That’s what I think I m going to do plus I think I’ll change the coil packs while I have it apart I have a 2010 Sentra SR I think I’ll also use irdium plugs too my 11 Rogue SV AWD 2.5 L used them runs great the Sentra 2.0L uses Platinum plus plugs but they also say irdium are better and can be used any thoughts ? Thanks for your time Also Nissan has some balls designing this engine like that I sometimes think they do it deliberately so you have to get the dealer to do it ! Thanks again.

[@pens87668]

John Yomtov You will want to use Iridium spark plugs as that’s what’s in there now. I also suggest changing them on a cold engine because one downside to the 2.0 engine is that if you change them on a hot engine, you may crack the header and/or cylinder wall.

[@jeepz669]

Hardcore bro 👀🔧

[@vamphunterx]

Okay, I just finished fixing my car today after watching your video. Thank you.

[@lloydd1386]

this only applies to the 2.0L engine... I have an SE-R (non v spec) 2.5L. I believe it's the same engine in the altima. had to follow that video. but your video helped me out a lot! best part about the 2.5L, intake manifold goes towards back of car, not front, thus exposing plugs n coils n I only had to remove 1 piece sweet geezus :)

[@josefranciscoesquertalaman3827]

Hace cuatro años miré esta clase, hoy Viernes 16 de Junio del 2023 vuelvo a mirar este tutorial, es una excelente clase, presente cordial saludo desde Navojoa Sonora México 🎉

[@SEAPanel]

Back in the old days, when spark plugs were good for 15k miles, it took fifteen minutes to change them. Now they're good for 70,000 miles and it takes two hours to change them.

[@diegojesusgomez7395]

A small price to pay for more driving

[@liesejunh]

Thank you so much. What a pain in the ass. I will never buy another car without spark plug wires again. You saved me a lot of time.

[@ismaelcarrillo3956]

The 2013 is 100x easier.

[@ahmadceelowskeaddy5384]

Great job on this video and thanks for being so thorough! Very helpful!

[@edwuano7]

I tried to get the bolt off on the lower right corner of the throttle body (hardest one to get to). At this point the bolt stripped, and I’ve tried special sockets to help remove it that did not work. I’m at the point where I want to roll this car into a fucking lake. Any advice?

[@alex72829]

Thanks for the video, they were trying to charge me almost 1 thousand dollars for this

[@thecarizon504]

Glad this helped

[@marcustucker8301]

A couple tips to make things easier on those vacuum hoses. After you slide back the clip, use those pliers on that same area to grip the hose and turn it with the pliers clockwise and counter. That usually makes it come off smoothly when you pull, or use a flat tip screwdriver ( instead of said finger ) and push it as you pull with the other hand. I also use 1/4 drive socket sets in those tighter areas around the intake. It's lighter and easier. I use snap on 10mm 1/4 impact swivel socket and Milwaukee cordless impact.👍 If you invest in tools those will be your best friend.

[@josefranciscoesquertalaman3827]

Coincido con tú comentario, presente cordial saludo desde Navojoa Sonora México, Nissan Sentra es un excelente automóvil

[@dale3timid8r72]

Is there a throttle body gasket that should be replaced too or just an intake gasket?

[@777rob000]

Thank you man You saved me a lot of time for 4 spark plugs 👌

[@AllBrightColors]

Chapter listings in this video would be so helpful so I can visually read the steps on my phone as I go. All the things you have to do seem OVERWHELMING! I’ve never had a car that took so much undoing just to change the spark plugs

[@lowspeed2000]

This is unbelievable how much work just for spark plugs. Thanks Nissan! P.S didn't like the background music. super annoying. But good video! Thanks.

[@reddemon52]

This is why I'm considering selling mine.. getting a Corolla

[@AdamStarbuck93]

I've got an '08 Sentra SE-R and it was slightly different than this. Thank goodness I didn't have to remove the intake manifold to get to the plugs, they were right on top under the plastic cover. 3 screws and then a few more for each of the spark plugs. Unfortunately new plugs didn't fix my misfiring engine (P0303 code). Next up, fuel injectors... They're behind the throttle body which should be fun.

[@yaboydryp]

I made $80 in a hour by watching your video. Thanks pal

[@IKhanNot]

The funny thing is it's way easier to change the spark plugs on a V6 or V8 non turbo Mercedes Benz than it is on this econobox. Kind of sad.

[@chrysspeaks]

Thank you so much for this video you helped me change my spark plugs it was a hassle but I got it done!

[@michaelserra4535]

just a tip after I cleaned my throttle body, i moved the butterfly valve to fully open and close when i was cleaning it and when started it, the engine started surging. the TPS is very delicate so if you wanna clean it all you have to relearn it, or if u dont wanna, and its still looks kinda clean, u can just wipe the back and front so you wont be inconvenienced to relearn it.

[@danielsnitrorcchannel4568]

when you have it all apart its a great idea to clean the throttle body too! i just did a nissan sentra and before you do this whole job make SURE THAT YOU DISCONNECT THE NEGATIVE BATTERY TERMINAL. i used throttle body cleaner. dont be afraid to move the throat plate while cleaning it. you cant mess it up. make sure you get all that black gunk out of there. you will notice a difference in power afterwards. it wont mess the throttle body up cleaning it. no codes came on for me because of disconnecting the battery prior to doing the tune up.

[@edrubinstein9883]

Looks good! Ordered 4 Iridium plugs from Rock!

[@juliorolon1403]

Great vid bro. Service engine light here i come!

[@eddieperez8704]

Great video man! Much appreciated.

[@AaronZOOM]

I wish you hadn't fast forwarded through some of the reconnections at the end. When you said to reinstall the air intake duct, I did so, but I missed the first part where you reconnected the purge volume control valve solenoid electrical connector. Once I had everything reassembled, it started up but was running really rough and I couldn't figure out why. It might have helped to specifically call out every reconnection the same way you called out every disconnection so nothing gets missed (especially if you took a break for lunch between disassembly and reassembly like I did). It's a tight space, and it's sometimes hard to see all the hoses and connectors at a glance. Just as a warning to others who might attempt this - when reconnecting, go back and maybe watch the disassembly stage again to keep all the hoses and connections fresh in your mind, since it can be easy to overlook during the double-speed sections of the video.

[@ashleysabria9262]

can you list the tools you used?

[@paulkaufman4901]

Great Video - Hate the music! You did a really nice job of explaining your steps, etc. and your timing was so good the music wasn't needed to fill any space and it is a stark contrast to the relaxed steady mood you are setting.

[@Mhdez1]

What’s the length of your extender or what do you recommend?

[@ig_deeana_x2471]

Is it necessary to remove all those items in order to get to the spark plugs?? Also I have an 09 car and wanted to know if the coils was all that’s needed to change then out or does their have to be more to that??

[@psxjmes]

Really appreciate the video this is the first car I've owned that has a 9/16 size spark plug what a pain in the ass to do a simple tune up

[@SplosionMovies]

Any 14mm “spark plug style” socket will do? Got all the way to the plugs before realizing my only socket is imperial and doesn’t fit.

[@jasonbouldin3710]

It recommended changing the intake manafold seal whenever you take it off. Is that a big deal? 197k miles on 2012 Sentra.

[@ppeace813]

Thank you, thank you, thank you for your great instruction and great video you are very helpful👍👍👍

[@zzman5306]

Good idea to use anti seize on the plug threads

[@davidprickett8930]

What plugs did it have in looked like it had Denso? #?

[@2sexc718]

That intake in pulling water in you can tell its not just grime

[@ericlemarec]

Great video, very useful. If I may, two questions: torque on spark plugs? And did you deem it necessary to replace the gasket on the intake manifold? Many thanks.

[@rudimurga7034]

168 in-lbs Hyynes repair manual

[@jr-pl9kj]

touching the spark plug electrodes "tip" doesn't damage them in any way. its just gap setting isnt required on certain types of plugs.

[@ernestolozada8721]

Do you think it's a good practice to cover each manifold with a cloth or shop towel..? Thanks for the step by step how to replace spark plugs as well as the ignition coil on this vehicke. It's a little different from the older model Sentra ( accessibility ).

[@icrissyfy]

You have to take this and that off just to change spark plugs??? JC.

[@davep5647]

what kind of gasket glue for the throttle body and intake? Also,i returned a set of plugs because they were incorrectly gapped so check the gap!(the kid at the store then took a disc gapper and started prying it to widen the gap.He probably damaged the plug.I got my money back and bought elsewhere. Lotsa clueless kids working at these auto parts stores...beware of their advice).

[@renellehunt3284]

Did the ignition coil’s have to be in order when putting back on with the spark plugs.??

[@kilbourne22]

Any tips,?the intake cover bolts, I got the one furthest to the right in front and then the back under throttle body left. I don't wanna spray anything but this one at the bottom I CANNOT budge it at all and only have so much room for leverage and using a small socket wrench cuz I'm poor, Im afraid the tip of bold is a little messed up from slipping, not stripped yet but getting there

[@acidhendrix]

I notice you didn't mention anything about the manifold gaskets. Im assuming if they appear in good condition it's not 100% necessary to replace ?

[@verinb9]

Should you replace spark plug wires along with the spark plugs too? 🤔

[@masterrash1]

Wow unbelievable I don't have to go through all that with my 11 Spec V just the engine cover and the other side and that's it right on to the ignition coils and spark plugs just a minute

[@thecarizon504]

Yeah this engine is special... don't understand why the intake had to be routed over the engine.

[@johnyomtov7514]

You forgot anti seize for the plugs you should have disconnected the battery and if you blow off the block with air from a compressor for all the dirt than you don’t have to worry about getting dirt inside the intake valves also you should have changed the PVC value also and touching the end of the plugs with your fingers won’t hurt them you just don’t want to drop them or tap the bottoms of the plugs because that can change the gap opening and the 11SeR has a 2.5 liter engine and yours has a 2.0 liter engine big difference come man WTF try extension on some of those hard to reach bolts again never do anything like changing plugs or electrical work without DISCONNECTING the battery !!!! I hope you put in Irdium plugs and not Platinum back in and there’s nothing special about that engine it’s typical Nissan doing another stupid fucking design

[@AdrianGarcia-jg4tn]

Is there any gasket that needs to be changed out on the intake manifold? Or is there some sort of rubber seal?

[@cliffbooth7075]

Given that you didn’t disconnect the battery, did your check engine light come on and stay on when you switched the car on afterwards. It should’ve come on.

[@thecarizon504]

No I did not have this problem. Normally I would take the precaution of disconnecting the negative lead but it seems I neglected to do so here.

[@wadedog4280]

So there is no gasket for the intake ?

[@Ryan_Carder]

Do you remember all the parts you needed? Like gaskets and stuff? I can't find very much info online in fourms, and I want to make sure I cross my Ts and dot my Is.

[@bjharney5307]

I missed the part showing replacement of the intake and throttle body gaskets. Did you not change them or do it off camera?

[@josefranciscoesquertalaman3827]

Excelente me gustó.

[@anthonywassil5746]

Take that manifold off and replace the plugs. You replace the ignition coils also so that you don't have to take it off again again down the road

[@HeyYallItsBruno]

Did you have to replace the intake gasket?

[@NeutronX101]

do i need to replace the valve cover/ rocker cover also? What happened to your bumber toward the end.

[@thecarizon504]

No, you shouldn't have to replace the valve cover. And I had removed it as part of some other maintenance I was working on.

[@julianrubio4679]

Good video! Just one question: Should I disconnect the battery when I replace the sparkplug?

[@dubois2.024]

Did mine using this. Thanks man.

[@futureshock7425]

Can you post a video of the sound and performance of your cold air intake? Thx

[@bennybarcellos6098]

I have a question that i hope the author or another commenter can answer. A short way into the video, he removes a bolt holding down a bracket which is attached to the manifold. This is when he dropped the phone or camera. He says it is 10mm but it definitely was larger than 10 on my 2008 sentra but that isn’t really important. I dropped mine and it didn’t fall through to the ground, and I can’t see where it went. I also found a black widow directly under the manifold so I won’t be sticking my arm down there and feeling for it. So, what are the specs of the bolt if I need to buy a replacement? Length and thread pitch. I tried looking at diagrams of the engine but the bolt didn’t appear on any of the images I browsed. Other than dropping the bolt the replacement went great, thanks to this guide. Thanks!

[@thecarizon504]

Hey benny, glad to hear you were able to get this project knocked out. Sorry to hear that one of the bolts fell through, I absolutely hate it when that happens. 😅 In terms of the bolt specs, I don't think anyone is going to be able to tell off the top of there head. Your best bet is probably going to be to continue trying to find the replacement. If you go to a nissan dealership, the parts department may be able to help source one. Or, you could try fitting some of the other bolts you had to remove until you find one with a similar thread pattern. Nissan often reuses the same bolt in multiple locations.

[@bluecavemen]

why didnt you add any of that gel on the spark plug?

[@zohebsaz]

Firstly, thank you for making this video. It's well explained and is going to make changing the spark plugs alot easier for me. Also, What kind of spark plugs did you buy? I bought Bosch Double Platinum 8121 but havent installed them yet. Are those any good?

[@thecarizon504]

I can't actually remember which sparkplugs I bought but platinum are the ones you want to get. Make sure to avoid touching the tips, if you get them dirty or you gap them it could ruin the plug

[@thecarizon504]

No, I wouldn't try cleaning them or you could make it worse.. It's just a precaution you want to take, if you accidentally touch it, it probably won't be the end of the world.

[@zakor736]

@@zohebsaz you also wanna make sure that gap is the correct size before you buy. they always have the spark plug guage up on the check out counter I believe its .035 for this vehicle

[@ralphyg7663]

07-12 Nissan Sentra OEM spark plugs are actually the Denso iridium ones, just picked them up at my Nissan Dealership and they come pre-gapped already, you can also find them cheaper at Autozone or O'reileys

[@michaelarmstrong648]

Do you still have this car? The electric connection at 5:36 has completely disappeared on me after changing plugs and putting everything back together. I need help knowing where it starts or something

[@thecarizon504]

I do, but finding where that harness starts would be difficult as it probably traces deep / behind the engine. It shouldn't have wandered off far, I would keep checking in the area below the throttle body.

[@bulgarianfreak55]

what is the gapping supposed to be for 2012 Sentra SR? i heard some new spark plugs are not always gapped correctly. What torque specs did you use for spark plugs?

[@TheIntellectualSlacker]

Thanks man you helped me discover a mechanic fuck up

[@RACERMIMI1320]

I got to admit all just to change spark plugs and coil its a lot of work damn lol

[@robertbarstow5962]

You kinda glossed right over torquing down the spark plugs... just saying. I mean with the packs it won't let them come right back up into the hood but not something I'd just hand tighten normally. Otherwise great video.

[@pedrohdz1964]

14 lb. Torque it should be 👍

[@sawsawBoom6]

great video thanks for sharing it 👍🏼

[@devinh7821]

I replaced my sparkplugs and coils and my car still misfired. I'm going to remove it all again today and put a new gasket on to see if that fixes the problem

[@Franko384]

Why would anyone designa an engine in a way that forces you to take so much stuff off for a spark plug replacement? WTF Nissan?

[@Nimbus.]

bout to part one of these out

[@DarrenAskay]

WHat cold air intake brand and size did you use for this sentra?

[@thecarizon504]

Injen, didn't really have different sizes. I can try and find the part number if you like. It was made specifically for the 2.0L

[@studiojason8049]

What’s the recommended gap size?

[@edwardcunningham6034]

Your video is awesome

[@pablojunior8333]

where do i lift my sentra to lift both weels off the ground at same time? In the manual only states the pinch welds as lifting points

[@thecarizon504]

Are you trying to do both front / both rear, or are you trying to do both on driver/passenger side?

[@gilhdez3893]

A lot a thanks for your video

[@simarjitsingh1777]

I have Nissan Tiida 2008. I am not able to open the spark plug with 14mm socket. Could you please give me a picture of that socket which you used ?

[@ismaelcarrillo3956]

Get one with a thin wall.

[@rogerbergman191]

I have a 97 sentra and a 98 frontier those are the good one's. There going downhill now

[@thecarizon504]

Certainely making it more difficult to work on, that's for sure.

[@rogerbergman191]

@@thecarizon504 i did my truck last week took 20 to 30 minutes

[@KVasiyaRoberts]

Torque spec for the plugs?

[@pedrohdz1964]

14ft lb. Torque 👍

[@hlacoille]

Did you have to change your intake manifold gasket at all

[@thecarizon504]

It is recommended that you do so. I hadn't bought one but the gasket looked to be in good shape so I didn't change it. It's only like $8 online so I would get one.

[@hlacoille]

@@thecarizon504 thank you, is that difficult at all and would you only need grease other then the gasket to put it in

[@thecarizon504]

It should be easy to take out and install, looked like just a thin rubber piece that snaps into place. Would just need a bit of grease on the outside to seal.

[@hlacoille]

@@thecarizon504 thank you for the quick response. 2012 sentra and spark plugs are well over due for change. Nervous tho, never done it myself before

[@thecarizon504]

Was too, hadn't gone as far as to remove the intake manifold before. If you have a decent set of tools and have worked on your car before should be easy. Only thing you'll want to be extra careful of is make sure to not drop anything into the intake ports or through the cylinder head where the spark plug goes. Also don't touch the tip of the spark plug or you could ruin it. Be careful not to just drop it into place either. Lower it down carefully so you don't gap it.

[@zabraknorth]

9:30 What are those plugs called my guy?

[@thecarizon504]

Not sure if the eletrical connector has a specific name but it goes to the coil pack, which is what I was pulling out.

[@thetinz6813]

I have a legitimate question it's not about the spark plugs which this video is very helpful by the way but I installed that same cold air intake and I have a check engine light that wont go away is there a performance chip I have to buy the tune it or something?

[@thecarizon504]

Have you run the code? You can buy a bluetooth obdii reader for like 5 bucks and I believe there are free apps in the apps store to scan for faults. Most likely it's a P0101 code, in which case you would want to check all of your fittings to make sure there isn't a leak.

[@thetinz6813]

@@thecarizon504 its says maf sensor and transmission speed sensor but I just replaced them.so that means I did something wrong I guess does your rubber tube sit on your headlamp wiring?

[@fernandogodinez661]

I'm thinking of doing this service for my 2012 Sentra...what type of spark plugs do you recommend?

[@pedrohdz1964]

NGK X iridium 👍

[@fizzlegloop]

Would it also be a good idea to replace the air intake gasket and throttle bottle gasket at the same time since you already have it apart? Planning on doing it this weekend and was wondering the gasket location for both

[@thecarizon504]

Yes! This was a mistake I had made in this video. Replace the gasket while you are in there.

[@fizzlegloop]

@@thecarizon504 awesome! is the location of the gasket at the bottom of the air intake manifold?

[@spencerpope6838]

Help! I replaced the spark plugs with iridiums, now it’s misfiring. What are your thoughts? I’m thinking air got in vacuum lines or replacing plugs with non iridium, or coils.

[@Juice-jx1pr]

Replacement the spark plug boots

[@spencerpope6838]

@@Juice-jx1pr thanks for the reply. It ended up being a plug that was gapped wrong from out the box. Couldn’t believe it was that simple

[@matttuckwood3571]

So am I missing something here I can get my old lugs out but the replacement plugs are a different size socket and the socket that fits the new ones is too big for the hole

[@thecarizon504]

Matt mine uswd the same socket head. You might still be ok of you can find a narrow socket that will fit, look for spark plug sockets.

[@anthonyrivera6897]

Omggg what a headache to get to the coils and plugs that's crazzy

[@westynblake177]

@the carizone So I'm about to change my spark plugs and I've got NGK iridium plugs. If I accidentally touch that part of the plug you said not to is the part ruined?

[@thecarizon504]

Proba ly not, the biggest thing is if you change the gap of the plug by bending the tip even a bit. You don't want to get oils from your hand on it either but it's not the end of the world if you do.

[@westynblake177]

Could I just wipe it off before i put the plugs in? And thanks for getting back so fast.

[@rachelbrown7739]

I am confused on which socket wrench to get to change the spark plugs. Can you please tell me the exact brand, please?

[@thecarizon504]

Found at an autozone, they are specific for spark plug changes and have a magnet on the end. I believe I mentioned the size but if not, I can look it up.

[@rachelbrown7739]

Thank you. I was trying to look it up. I know you said 14mm but there was a variety and with everything going on, I don’t want to buy something I can’t return. I can double check with my autozone. Thank you

[@ashjensen5712]

should i do this! with the battery connected or disconnected

[@thecarizon504]

General rule of thumb is you should disconnect the battery any time you are unplugging anything. In this case you are unplugging the coil packs so you should go ahead and disconnect the negative terminal.

[@AllBrightColors]

I have never had a car where I has to disassemble THIS MUCH STUFF just to change spark plugs. No thank you. Now I can see why the mechanics are charging so much. What a headache!

[@secondfirstsecond]

Nissan has to redesign the ergonomic of this engine, why there's a lot to do just to only replacing the spark plug. Ive seen other engine is made easier to replace the spark plug, you only need to remove 2 bolts on the engine cover.

[@demetriusreynolds9657]

How long did it actually take to do this?

[@thecarizon504]

3 hours including filming amd rushingto ths store for a magnetic socket

[@dianedehart]

dang -- I was charged $600 for changing out spark plugs replacing valve cover gasket! :(

[@diegocerroblanco7059]

How long does this process take just curious?

[@thecarizon504]

If you have the tools and know how to use them, 2 hours at most, shouldn't even take that long.

[@ismaelcarrillo3956]

10 minutes if you have a 2013 or newer

[@cumshot247]

Was there a gasket when you took the throttle body off? And does it need to be replaced?

[@boxergertrudeadventures]

I was told gasket needs replaced...he also states that above in comments

[@cumshot247]

@@boxergertrudeadventures Thanks!

[@DM-hw4cr]

That's a pain in the ass compared to the rogue 2.5. No need to remove intake manifold