1976 C3 Corvette Brought Back to Life After Sitting Since 2004 Part 1

Everyone loves to bring me cars that have not been run in decades. That is true with this 1976 C3 Corvette. The owner hasn't driven it since 2004 so it will need a little love to get back on the road. We will start with an oil change, spark plugs, lubing the cylinders, fuel system clean, and finally turning it over by hand.
If interested in a TheCorvetteBen KZbin Channel window decal, please send $5 through PayPal to [e-mail]. If you are international, please contact me first about price!
For updates on the projects between the videos, check me out on the following websites:
Facebook:
/ thecorvetteben
Instagram
/ thecorvetteben
Patreon
/ thecorvetteben

[@PatrickWagz]

My Dad bought a new Corvette. It was a 1976. It was Bright Yellow. It was off the road for over 20 years. He last drove it in 2001 and he lost his battle with lung cancer in 2021. I got it back on the road in 2022, as a tribute to him. Now, I can be reminded of him every time I take one of his 4 grandchildren for a ride in the "Pappy Car"...

[@JaydaHeartTV]

A C3 Corvette is my dream car. They're just so beautiful.

[@midsouth2strokes185]

I just passed up on a trade for a red 80 corvette for my yellow 78 Z28. While I love my Z it was heartbreaking to tell the guy no deal and watch the car i have always wanted drive away. All though it was rougher than my car I still hated saying no to a C3 vette. At least the wife and kids can all ride in the camaro on the bright side 😉

[@jerrittyler2614]

TheCorvetteBen's KZbin channel re-ignited my interest in C3 Corvettes. I owned a 1979 C3 15 years ago, today I went and bought a 1977 C3.

[@SchnelleKat]

Awesome! 77-80 Corvette's are my favorite.

[@CravingClassics]

Sweet ride, good luck with it!

[@sw-mg3xy]

@@SchnelleKat Their sleds but they were great cruisers - had an 80 from 85 to 92 that i loved - had a 90 since - the 90 just doesn't have the cool factor

[@freewill51]

Same here. I had a 1980 that was trashed back in 1992-1994. Because of this channel, I went and found a beautiful red 1980 that just has some one hour fixes.

[@doug2993]

Congrats on the purchase. I've owned a 78 for several years now. I drive it a lot. Always turns heads.

[@THOMMGB]

For some guys, I think the dream of owning a Corvette one day is much stronger than the actual enjoying and driving a Corvette. On KZbin, I recall seeing tests on Super Tech oil and it's been found to be just as good as the regular name brand mainstream oil. It meets the oil industry grading specification on the container.

[@sw-mg3xy]

I've been driving one since 84 when i was 18 - i went from not getting dates to getting head from cheerleaders - it was an awesome car to own then - seriously - nothing like that since til i got a 911 - same thing all over again except a dif level of women

[@redneckbryon]

I agree with you, on that statement, a former neighbour of mine has a 73?? in his backyard rotting away, it was running about 8 years ago but hasn't been registered in over 16+ years. He's the type of person who thinks even though something is sitting when he goes back to it, it will be the same way it was when he left it.

[@flipeecupsstuff7632]

My dad's 1970 sits too. Doesn't bother me too much I'll buy it from him and drive it plenty.

[@sethalbert1239]

I have my Dad's 73 now sitting since 09...baby steps but look forward to getting her on the road. Thx for the video to give me some confidence, lol.

[@PatrickWagz]

Do you still have your Dad's 1973 Vette? How has she been treating you?

[@AutoAuctionRebuilds]

I love watching these videos!

[@goyallucky5203]

HI BEN,I just recently discovered your cool videos of you fixing up these Vettes,Ive been watching your videos all night cause they are AWESOME. i had a 2001 convertable vette with the 5.7 LT1 With BORLA EXHAUSTS and BEAUTIFUL black aftermarket rims.about 3 months ago my VETTE got involved in a 9 car accident cause 2 guys racing cut off a tractor trailer and from there all hell broke loose and my car hit another car that was ahead of me that locked up its brakes and spun out of control,ofcoarse it wasnt my fault and the insurance company paid off the bank and my car was totalled,ive been mentally crushed the last 3 months.ive been driving around a little KIA and it really blows, next month im going to a corvette dealer called KEYSTONE up in my neck of the woods in PENNSYLVANIA and they got lots and lots of VETTES,alot of STINGRAY VETTES ALSO which i love. ive been depressed man cause the accident wasnt my fault and i really took care of my VETTE and thats what really hurts man. anyway i wished i lived in TEXAS cause i would bring my VETTE to you to fix up,even tho i havent bought my other yet but ill have it in another month or so i and I CANT WAIT. You are the BEST BEN and I really enjoy your videos

[@maxfly7079]

hi Ben, fyi...50 yr. Old tech. In c3's..and their still a pain to work on by most..thats why most would not spend more coin or just buy alot newer one...Wow ...You have the Patience!!! and knowledge to do it for a profit...Great videos while doing it too.

[@craigscott5661]

I drive my 72 Corvette everyday put a small block 350 with fuel injection 350 HP and a manuel 5 speed. Has Air power everything side pipes and leather. Upgraded suspension I love the car. Not as boring like most cars on the street today. It’s too bad the car culture is fading away.

[@ronaldhagadorn5512]

U are right, I have a 1973 corvette. Last I drove it was in 2013. A lot of hate when I drove it! I keep the car in my garage as a investment! Keep up the hard work! U remind me of me when I was younger. Ron.

[@MThrow]

You work on cars for a living and don't have an oil filter wrench for the most prolific engine in America. But BIG props on the valve cover windows. That's an old trick I used back in the late '70s early '80s when I was building and restoring cars. Nice to see someone that actually pays attention to the little details of starting an engine that has sat awhile.

[@TheCorvetteBen]

I have probably ten of them to tell you the truth. All sizes and shapes

[@mickqueensland1204]

I have just got my 1977 out of mothballs. It has been over 15 years since it ran. Mine was parked in a garage though and wrapped in sheets so not as nasty as this yellow one. I changed the oil, fuel filter and top rubber lines and coolant first, put a new battery in it, added fuel treatment to the tank and topped up the tank with fresh gas. Cranked it over and watched the oil pressure build up, no bad noises, and then she started right up. Running on maybe 6 cylinders lol. Changed the plugs which were all totally black, set the mixture and checked the timing. Purrs like a kitten. Cool. Car won't move, check the trans fluid, nothing on the dispstick, add 3 litres (3 quarts) still not on the dipstick... Buy more trans fluid and add another 3 litres, now we are moving. Drove around the block, cool. I didn't bother with oiling the cylinders, though I originally planned to, I figured its got 150,000 on it now and it was very tired when I mothballed it. She is due for a engine and trans rebuild anyway. Now.... tires... Thanks for sharing this video, nice to see another vette being resurrected. Cheers, Mick

[@drewsillytoo]

Wow this is exactly the same as my grandpa's c3, same year and color

[@jblo6822]

In Oct. 1972 I ordered a '73. Waited 4 months, but it was worth the wait. I wish I still had it.

[@rayspeed]

Had my beautiful C3 for around a month now and man LOVE it to bits, have raked up some miles on her and went to see a wicked engine man today to get some love for her

[@stimky617]

A local man in my village is selling a 1976 Corvette Stingray for $4,500, I'd buy it if I wasn't 14.

[@craigscott5661]

Michael Reid Michael when I was 15 I saved for 3 years strait and in 1983 I bought my 1964 Corvette Coup. I still have it today after 36 years!!! Don’t give up the dream. I got 3 Corvettes now.

[@OfficialWhosHim]

Uhh ill buy it

[@Nonviableaccount]

I hope you bought it

[@rnv28ster]

Thank you for explaining and showing the what, why, and how to your troubleshooting and repairs for each step of the project. As an owner of a 67 Camaro and 81 Corvette I feel much more confident having your videos to reference. Your knowledge, experience, and time are very much appreciated. Your videos are extremely valuable as the content / information you provide help save those with less experience from costly mistakes. Thank you!

[@mikejohnson5837]

Couldn't agree more with you about using the cheaper oil to check out the engine. Also liked the idea of the valve covers with the holes, great idea! Congratulations on your new lift. Nice addition to the shop!

[@shomaniac]

I like all of your step by step methods. One thing especially is your cut open valve covers. Have you thought about siliconing a piece of plexi glass on top of them? It would allow you to use them for extended runs and should help avoid any oil from splashing out.

[@c.s.s.1723]

I like seeing someone making all of the right moves to prevent any damage. To work on a client’s car you really have to take all of the extra steps. Video record of exactly what you do can only make it easier. Nothing much has to be committed to memory.🧐

[@Dchamp1371USMC]

I had wanted a c3 corvette for so long, and when me and my wife found one for sale that was also local we checked it out that day. We pretty much bought it that week, was able to get tags for it in a couple days, and drove it home. I have had mine for just over a year and not only do I not regret getting it but I can’t stop driving it. I go to the store, go see friends and family ,and everywhere in between. I have so much fun just driving it and get compliments and head turn all of the time. It makes me feel like a kid getting a new car. I have the sweet thunder inserts and hooker header side pipes, it sounds amazing. I have put 600 miles on it since I got it but it mostly local and some highway. I have done some basic upgrades like led headlights, all new headlight hardware hoses actuators etc.aluminum high flow water pump. Carb is rebuilt, edelbrock 600. Just like Ben in this video I just took out the old ac pump 45 lbs of weight reduced in the front. I don’t have any major performance builds , but I am making mine look pretty, chrome parts custom colored parts to match the yellow of the car.

[@thomasbatigne5465]

Hey man, congrats for the lift ! Great purchase. It's been two years that I follow your work. Warm cheerings from France ;)

[@MitchGrooms]

I have seen people just start it with any precautions taken, great job.

[@paulvarrieur976]

I agree with your oil choice. , also, consider pulling the distributor and priming the oil system with an electric drill before start

[@nknez76]

Love the old corvette vids. These really help inspire me to get past that fear factor when it comes to working on these old cars. Looking forward to the rest of these!

[@correyy]

They're easy to wrench on

[@pitri196]

Great Video, I think this ist the best way to wake up this long sleeping C3 ;-)

[@garyfeltus9801]

So far so good. I like the way you do things. I just did a 304 that's in my Jeep. We had a couple of lifters sticking. We put that cheap oil in it. And a quart of marvel mystery oil. We drove it for a while lifter noise went away . Then we put the good stuff in .

[@houseofno]

I love the updated rear bumper.

[@HorsepowerGarageVideos]

I'm really thinking about buying one of those portable lifts after seeing you use it, I hate laying under cars.

[@craigscott5661]

Horsepower Garage yes I found one used for $1500 after a guy built one car and then sold the car. Well worth the investment and you get one more parking space in ur garage.

[@RWBHere]

Beautiful job! Thanks. *As SerpentZA says, 'Stay Awesome!'*

[@bradleyfurer7847]

Nice...I'll have to do this soon...my 76 has been sitting longer than this one. Now I know the steps!

[@djazz699]

Went to buy mine yesterday!

[@wonkaoil420l5]

Dont know if you read this but I really appreciate all of your videos there are very educational and I am pretty shure I could do a full restoration on a Corvette right now with all of your videos

[@sondabrown7373]

Beautiful job!! Thanks so much! I have a 76 corvette.

[@streetstock72]

Thanks for another cool video Ben,yep your singing to the choir here,my wife’s 79 Corvette (she owned since new)was sitting from 05 to 16when l restored frame on,basically rebuilt replaced everything and only surprise was the Canadian cost of completely rebuilding the rear end but with keeping the original gears,don’t even want to post the price!My wife has put on at least 10,000 miles in the last 2 years driving it every chance she gets.Your Canadian fan Streetstock72

[@hootsmccoy1450]

Awesome video showing the steps to take.

[@jayr101480]

Serpentza sent me!, good craftsmanship 👍🏼

[@bobbybannerman4547]

GREAT 76 VETTE TO FIX UP. BEST OF LUCK ON THE NEW PROJECT. TAKE CARE.

[@terencemahoney7073]

Glad you explained about the oil. I ran Traveller 5w-30 ($13.99 1 gal.) in my pickup for 5k miles and had to use a thin screwdriver to start flow of black sludge out of the oil pan when draining. Never again. In this case you'll be fine.

[@duaneulman9915]

All us guys are working all the time no FREE time ;)

[@johntran7321]

a lot can learn for you brother

[@e.z.hernandez6378]

Really digging the new lift Ben. Great buy there, bet you're already loving it.

[@jtssf1234]

Hi Ben, Just picked up a 1978 that hasn't run in 8 years. Perfect timing for my project. Right now I'm trying to change the fuel filter in the carb. Trying not to destroy the fuel line fitting or the carb--it's really stuck. I really appreciate your videos. Thanks, Jim

[@harbourwest64]

My Son and I just purchased a 76 C3 in August and it too was not run for years! . love all your vids Ben, they are invaluable to our new project! Cheers!

[@todhurley3756]

I have a 1979 these are beautiful cars I love mine.

[@dangoodall-williams4200]

You are a great mechanic. Damn!

[@dustinchoat8956]

I love your lift!

[@aboutmyfathersbusiness8324]

I was chasing a trans leak for years. Ended up being the dipstick and the step up shift linkage seal. Added a aftermarket dip stick wth a massive rubber crush gasket and eliminated the step down linkage with a nut /bolt silicone and two rubber washers. I just manually downshift. Never use Fram. If you must, use a higher end filter. I had even a higher end filter rattle in the can after a 3000 mile change. That is an early 76 due to the long compressor. I replaced mine with the VIR receiver dryer. It has been working flawlessly for about 20 years now since I replaced it. I dont however have those air injection pipes. I just have a smog pump with one port into the passenger side manifold. More convenient. Previous owner put a hole in the passenger wheel well to get at the spark plugs. Not necessary as you can reach under the compressor with your right hand. I put Iridium spark plugs. They run hotter and it actually took a while to burn all the carbon from the combustion chamber; Fouled up a few of the plugs with the previous carburetor setup. EFI now. Added Seafoam religiously to the crankcase and tank to clean up top and bottom. I had the 76 in California since 1992 that needs to be smogged biennially. Original block and heads with 177K on the clock. it always passes smog with flying colors (I added EFI:) Most of the minor parts are still virgin. Major front and rear end rebuild with all poly bushings and added the Gymkhana suspension. I love watching kids light up when they see it and with that new suspension, it is a blast to drive. P.S. I do my own tinkering/repairing as well with the exception of allignment:) I would suggest anyone with a C3 to spend the 1300 USD and get a EFI kit. The driveability is amazing! Lose that carburetor but keep it in storage just in case we get hit with an EMP:)

[@tacoma5543]

I've been sub'd for a long time now and still with every video I watch I want to go out and by an old Vette just so you can work on it.

[@luisaacevedo5783]

I own a ‘79 that came with the spoiler package. I love the car. I think she is sexy and apparently other people think so as well by the coments made. It’s a 4 speed car with a 350 and geared high as all get up. At 70mph I’m doing 2500 RPM.

[@johnschutt9187]

Way cool. Thanks. I don't know how guys can own them and not drive them. I've wanted to drive one for a very long time.

[@johnhansen4550]

Project Farm did a neat comparison of different oils. In most applications the Walmart is just fine and you waste your money on high price oils. Better to change it more often than go for the expensive stuff....

[@jerryuptmor2826]

Yeah. The owner is gonna love it. Are you going to fix that fuel filler missing thingy too? Note. The 56 Caddy was the most fun to watch and keep up with. Wish you would fix up another old field find, maybe a 60's something or other. Thanks, Ben. We like your work. How's the wife and baby doing and I miss seeing the dogs. Blessings.

[@doug2993]

Nice lift!

[@paulbean7659]

I have bigger lift with my 80 corvette still setting on it for to many years!!!

[@TheRubadub1]

I really enjoy your vids please keep them coming....and thanks

[@johnp1966]

Love the channel, I use the supertech oil in my cars, it's decent oil.

[@dragsterstransmissions]

I haven't put a video on my channel yet of me doing this but when I get a car in that has been sitting awhile I have a little plastic fuel tank that I hang from the hood with hose running down to carb.. get a cutoff valve to put in your line also lowes carries them in the lawn mower parts section. Once I determine engine is good I start it and let the fuel pump send old gas from tank to 5 gallon jugs. Easier safer way. Especially on the vettes with the fuel filler mounted where it is. One drop of that old gas is hell on a paint job. Of course I usually install a new fuel pump regardless after old is pumped out. P.S. get yourself a remote starter button caus you will wear your azz out going back and forth to the key. I subscribed to your channel awhile back. Good videos keepem coming.

[@garrengroom3831]

Awesome Ben! 🏋️‍♂️👍

[@junkorbust6326]

I’d say that’s normal, it happened to me with my first car, I drove it as a daily and then less so as I got married until it was put away for 20 years while the business and family grew. My sons and I now have it back on the road properly and now they and their sisters can also enjoy. Just how it often goes. No one plans it, life just happens.

[@sindelicious4374]

My absolute dream car!

[@ckstaff]

Hard to explain why they get used so little. I myself am confused as to why I have spent some 5 years and approx $40,000.00 restoring my 69 L68 C3, yet for whatever reason I find myself very rarely take it out and drive it, then to just put it away for several months in the winter. Seems I get more enjoyment working on it and tinkering than actually driving it. Am I alone on this or does anyone else find the same thing? My car sat from 1991 to 2007 or 08 without starting, and even then never saw the road because it didn't run right and leaked fuel everywhere and still did not see the road for some 21/2 years that I had taken over the car in 2013. Question to Ben, did you also change the gas filter when draining the old gas and clearing the lines? I ask because when I first did what you are doing I did what you did and it still didn't run right. I began finding small metal particles in the carb, it ended up coming from the old canister fuel filter. You may find as I did by putting the see through filter on that it miraculously runs better, except I did away with the carb and got a new one.

[@stevegartman113]

Have you ever used a good strap wrench on the oil filter makes a world of difference especially on small hard to reach areas but on my 77 there’s lots of room and it makes removal super easy.

[@chuckgannon5633]

I love the c3.i bought a 1976 stingray last spring drove it all summer.now I'm doing some little things to it..before I got it from the original owners son..it sat in a garage sense 1983..the son started doing some bubba repairs..then his wife filed for divorce..so I got a good deal..with only 42000 miles on the odometer..I also got my eye on a 1972 stingray that has been in this old abandoned house registration says 1976..has 3500.showing on the odometer..hoping I can acquire it when I track down who actually owns the property..

[@luissalazar2021]

Nice job

[@michaelcook768]

Ben...just an FYI, unless they have changed recently, NAPA oil is Valvoline..(.Ashland Oil)...a top tier brand. Now, some of the specs are different...Valvoline may add different additives to make their branded product cover many specs, whereas they provide to NAPA as they request. However, the base crude is the same. My guess is WALMART is probably Quaker State. Oh, Marathon Oil bought out part of Valvoline...#3 Oil in the US.

[@alhodge4051]

nicely presented.

[@bullieboi]

Cool, so far so good!

[@DaveA441]

when me and my dad work on our cars from the 60s 70s and 80s and i remember when he was first teaching me and i asked what kinda oil do we use and he said " bro this motor is 40 years old, any kind"

[@Tankgeeman]

I've used cheap oil on my 89 Mustang 5.0, my LS swapped 93 GMC 1500 and my 06 vette from 07 until now. Ive never had an issue. I honestly think that most oil is exactly the same.

[@nefaurora]

Ben, "Split Fire" Plugs are special specific Spark plugs for car engines with "Known" oil consumption problems...burning oil heavily, etc. The "Split Fire" Spark plugs are meant to actually "Fire in oil" or even "Fire when covered in oil" as they are specially designed not to foul if you can believe it. They are very different with their special "Y" electrodes when compared to standard spark plugs which they are not. Just thought that you should know... Tony K., Melbourne, Florida

[@jwester9828]

SplitFire claimed that its "V" electrode design improved combustion by allowing the ignited flame to pass through the gap in the electrode, instead of around it. SplitFire advertised that use of its patented spark plugs resulted in significantly better fuel economy, greater horsepower, lower emissions and cost savings than use of either conventional spark plugs or platinum-tipped spark plugs. They were sued by the FTC for false advertising.

[@jwester9828]

It was a 90's to early 2000's fad, SplitFire advertised that use of its patented spark plugs resulted in significantly better fuel economy, greater horsepower, lower emissions and cost savings than use of either conventional spark plugs or platinum-tipped spark plugs. The FTC sued them saying their claims were false, because of the law suite they had to stop their advertising program. They were not designed for car engines with "Known" oil consumption problems.

[@nickwillobey2205]

What's the matter with the people leaving a car as beautiful as this for 15 years, I'd be living in it if I owned it !!!!

[@dobynose]

i like the vids, but if i was going to critique you, is : i wouldnt change the oil before i found out if it was froze or not. a quick check for water in the oil is fine. as you said, its gonna be changed anyway if it does run. oil down the cylinders is fine, if you suspect it to be froze, but again, if its not upon inspection, and you roll it and its fine, spark plugs are an expense that can be saved for final tune up rather than before you find out if it has a knock, ect.

[@nitesfer]

Oil choice options always gets the debates going and the blood flowing :)........probably all the the same stuff but has different brand stickers wink wink

[@RODZILLA65]

Another 75-76 with an 80s butt. My Mom's 75 was the same way in 1991.

[@duncandonovan5270]

Good job!!

[@Ryukachoo]

They haven't been driven in decades because they're not great to drive (stock) and most owners think they'll be worth something if they preserve them long enough. But with some suspension and steering mods the thing really wakes up on the road

[@rubyred93chev]

_Actually Chevy Corvette for 1976 was a decent car(for its time). The slogan, the 'Spirit of '76 and Corvette' help the car sell a whopping 46,558 units. Yes by today's modern car standards, the car seems like a relic. (Seeing an abandon C3 of any year kind of gets me choked up, but glad decent mechanics like Ben are out there to help bring them back)._

[@tonysvets]

love the video thanks for sharing

[@terrydavis9319]

I good tip on the oil

[@billbly1691]

Another great video thanks

[@rnv28ster]

Thank you for explaining

[@nikogeorgiadis3690]

Be careful when using an electric vacuum to start the syphon. It’s not the liquid but the vapors that get you. Don’t ask me how I know

[@Sebastian_Dinwiddie]

I just tucked my baby away for her hibernation. You need to supply me my fix for the next six months Ben.

[@meatloaf666999]

Use the High miles SuperTech Walmart brand. It has extra Zinc and other add packs that are good for older motors. Its almost the same price as the stuff you got.

[@DadsDriveway]

It really is sad. The 79 L82 I am trying to bring back to life sat in the grass since 1983.

[@jamesdodd8731]

I noticed you didn't go with a fram oil filter. I have heard some people say they would never use fram filters. I just wondered what you prefer. Looks like AC Delco!!

[@BluesBoy-ij2rb]

Just bought a nice red 1977 c3 with good frame for $1700 ( but totally stock) I don't think it has ran since mid 90's ..... wouldn't start ,put a new starter in$25 put a little gas in carb. , Couldn't believe it fired right up but wouldn't stay running, changed the mechanical fuel pump(new $26)and it came to life ,runs excellent !!! But when put it into gear it wouldn't move , put a bunch of quarts of tranny fluid ($15 to $20)and solved that problem , looked on Craig's list got a nice set of the yj8 aluminum rims for $175 (traded the ralley rims for a set of mounted tires) ..........the great thing about these cars are they easy to work on ,parts are all over the place (cheap) and I think they are one of the best looking cars ever made !!!!!...to me just as sweet as a Ferrari, Lamborghini,etc..........I plan on building a radical 454,cam,headers dual 4 barrel carbs ,worked heads ,good stall converter ,etc. in my spare time and throw it in , loud and fast as fuck !!!!!😁

[@keynasiebert9173]

Nice lift! Beats the heck outta laying in the dirt, huh? Gonna do a "review" on it?

[@jacobwanamaker7290]

Split fire plugs, Old school. Lol

[@snappybonesify]

I use supertech oil in everything and it works just fine. Split fire plugs are junk.

[@Creed4222]

Came across your channel a few weeks back and pretty much been binge watching all your vids. Recently got me a 76 Stingray. One thing I noticed between mine and that yellow one is that panel beind the hood where the wipers are, mine doesn't have that.. was it an option on the Corvette? Again, great channel! I'm learning a lot about my Vette from you. It had been sitting for 18 years. 10 outside, 8 inside. Just about have the motor/trans pulled to reseal it all. Has a 383 stroker motor 3500 stall tranny. Got it to run for a bit before starting to disassemble it and its a beast!!

[@jwester9828]

It's an aftermarket piece, it's riveted on.

[@MartinLaBarbera]

Ben. About oil. What do you think about Rotella diesel oil with high zinc on an old engine without a catalytic converter? Oh just remembered someone put a cat in this exhaust. But if there were no cat would you use the cheaper diesel oil?

[@failranch9542]

It has the original exhaust. that's rare!

[@bubblehead7680]

I'm surprised that you don't pull the distributor and prime the oil system before trying to start them.

[@socialghost4400]

What I love about your channel is that you are all about doing the job right and doing it on a budget that the average person can relate to, unlike these other channels that all like “Hurr Durr dude custom!” ...and just go out and spend like $50K+ on parts and have $20K+ worth of tools and just pretend that’s something everyone “just does / have” and you are a loser if you don’t....I mean these are just stupid....and it’s always a bunch of tattooed and bearded guys...I mean could they be any more cliché than that!? ...seriously all those shows are pretty much exactly the same. What you do here is a lot more relatable and I feel like I am learning something new in every video of yours that I watch. Also your videos don’t have these stupid and annoying intros and are not constantly rubbing product placement in the viewers face either. So keep up the good work Ben, and thank you for another great video 👍👍👍

[@rustyjeep2469]

MMR Sounds like you’ve been watching a few PowerBlock shows... 😂 Don’t get me wrong they’re entertaining but they’re basically just infomercials for new parts I can’t afford.

[@tomholz9928]

Garage is very tidy! Nice!

[@HorsepowerGarageVideos]

I make sure stuff starts before I change the oil as long as it's not full of gas or water.

[@daveallison3507]

Lol. Your videos rock...we drive the shit out of our 80 C3...

[@Frank-mx2hh]

Will this method work for a 79 c3? Also anything extra to look for when it comes to CA emissions? A friend's dad passed away and has one, hasn't been started or moved for 7+ years. Is this series good to follow when attempting to bring the 79 back to life?