How to check Earthing is Proper or Not in Home

[@tamminalokeshkumar9899]

Voice with valuable information ❤❤❤

[@kamolhengkiatisak1527]

So clear and easy to understand. Have subscribed since last month when you talk about MCB, ECCB, MCBO etc which is so easy to understand.

[@sanjitkumargurung-zm8zv]

Very beautiful knowledge sir

[@usrm-wm1osbr5v]

Useful info video.

[@oscarwatcher99]

What a great simple way to test your earth circuit. 😊😊😊

[@bharatbshetty]

Very informative. Thanks for sharing this

[@meetr4u]

Good explained.

[@dido1803]

Great information!!!

[@bashiruosman473]

Good ❤

[@ambikapathi.m4140]

Good

[@vinothkumarsrv9033]

Easy understanding

[@ashishkulkarni6382]

Very useful. Thanks

[@fahadomar1503]

bro, you explained it in very good way. thanks

[@seenivasanseenivasan6685]

super

[@KamogaJunior]

Thanks 👍👍

[@anupyadav440]

High voltage breakdown tester testing methods plz

[@shwewin5086]

Tks very much.

[@ssennonojohnmary4406]

With the lamp method, I think when you connect a phase with earth ,you are creating an earth fault , and I think that lamp will just blow. Explain more!

[@nabuumaprossie8421]

It can't blow bcz earth and neutral are related

[@owolabiadeteye5919]

Thanks so grateful for sharing this. Pls voltage of P-N and P-E are almost the same, at what point does neutral is connected to earth. Pls I need clarification. Thanks

[@Ku5u]

hi, i have tested using the methods which you have shown and its all ok like you said but the voltage between neutral and earthing is 3 volts, i am getting shock from touching appliances like phone charger and the body of my computer can you explain why is that and how can i fix it?

[@hardhitter39]

you have to do earthing in your home call a certified electrician and do the process they will install a aluminium rod

[@Finalboss90]

thank you man

[@KamogaJunior]

Thanks very much

[@otobrisejerry1437]

If we are not getting almost the same volt with neutral and line when checking the earth. Does it mean that the salt we have used for our earth rod is not ok or working well? What should we do about it?

[@alboeng]

If I have battery bank which voltage is 117Vdc, what will voltage be measured between positive and building earthing terminal?

[@zenebehagos3537]

Is this method applicable for industries and factories

[@brittojohn1844]

pl tell me how to find out which wire is neutral and which one is earth in the absence of color code excluding test lamp method

[@ashokkumargnanasekarnadar]

Thank you for the quick explanation. I saw your other video on using Capacitor for power factor correction. Which Capacitor is to be used and what is the MFD etc to check and buy for the installation? can you guide 🙏

[@ashokkumargnanasekarnadar]

it's for a home with a single phase connection. I observe frequent fluctuations. Below 200 V is what sometimes it happens.

[@geoma6413]

Between my earth and neutral are showing Zero volts in multimeter is that ok? cos i saw in some video that 0 volt is also not ok is that true ?? The rest Earth and phase , phase and neutral are all fine.

[@gurukarthik_agri]

While checking neutral and earth if not getting any reading means? what's the reason?

[@anan_ahnaf]

what if i use my device with line and earthing point, as line- neutral and line-earthing have the same voltage?

[@SupertigerDev]

Is it normal to have 40 ac voltage between earth and my monitor dc jack + or - ?

[@bensonogbe2040]

What textbook (s) by an indian authors would you recommend for an electrician?

[@deivakumarkumar4857]

How can we determine Earth wire and The Neutral wires?

[@michaelisongekwere1402]

Our panel light chokes keep blowing up after a few minutes of switching on the light meanwhile other appliances are not affected what can we do to resolve this fault?

[@ShivamThakur-v3g]

How to correct it sir

[@danielteyehuago1633]

How do you bury a proper or effective

[@bhagwanpandbhar3406]

Ok thanks

[@sushilkumarmahto-h5j]

Sir n to p=212 Earth to phase=232 E to N=15 What is problem in this

[@bongdzeerasmus2350]

Hello there. I tested the voltage between the live wire and the earth wire and it was give me above 400Volts.

[@Fakafaaka]

is your house a power station?!😂😂 just kidding

[@Milkteabooba]

red needle to neutral + black needle to earth my readings is 001 to 004.. what does that mean?

[@lawrenceatkinson]

🎉

[@takasipattabhiramdora3811]

Neural to phase and phase to earth is same,(230v) But neutral to earth getting Zero What is the reason sir?

[@Mighty-vx7kr]

So in case there a fault or the earthing in our homes is not proper, how to we go about it thanks

[@slotzmori9181]

Call an electrician..... CURRENT KILLS

[@sachinms2772]

hiw to check it in a mechanical meter

[@danielteyehuago1633]

This bring about my next question. How do you bury effect earth

[@GoogleMP-un1yk]

Bhai switch off me bhi thoda thoda glow kar raha hai to kya kare?

[@arivalagan9943]

Please brother small question

[@manuellastrollo2168]

neutral must have zero volts when other test prod is connected to earth cause earth & neutral is connected on same terminal.

[@nabuumaprossie8421]

I do not understand how do you know that neutral is not ok in ma room

[@dadjoedrice1092]

What if the voltage gives 200v and the earth gives 298v

[@slotzmori9181]

So many stupid questions....if you don't understand then don't attempt to do it... CALL AN ELECTRICIAN... SAFETY IS PARAMOUNT

[@robianhussein5298]

Good explained.