Rod Building Basics: Part 2 - Basic Trim Bands

[@peterdavidchessell5952]

Terrible you can see the blank through it and uneven tension..

[@TheFishingHobby]

This is simply a demonstration of technique for trim bands and not something I was actually building. I mention on a lot of my videos (I might not have mentioned it on this video) that I’m watching what I’m doing through a camera screen. I do it this way so I can get the camera as close as possible so people can see what is going on. I can barely see what I’m doing through a small screen as I’m doing it. It isn’t an easy thing to do. It isn’t uneven tension, the rod building jigs I sell have spring steel constant tensioning rods that keeps tension on the thread very even. It is 100% me not being able to see what I’m doing because of the camera. I try to tell people they will be able to do a much better job than I’m able to do with the techniques I demonstrate because they won’t have to do it while watching through a camera screen. I probably forgot to mention it on this video so I should do better and remember to tell that to everyone on every video.

[@TheFishingHobby]

I pinned your comment so others may see my reply since I apparently didn’t mention how I have to shoot these videos in order to get these shots so close to the wrap. The technique is the focus of the video, not so much the result. I’d challenge anyone to do a good job while watching through a camera screen 😂

[@alexstamateris5977]

I’ve watched this 50 times I’ll bet! For me, It’s beautifully done, I don’t need to look any further. Thanks! alex

[@TheFishingHobby]

Thank you!

[@alexstamateris5977]

Excellent! Exactly the solution I was looking for. Thank You!

[@kyleguillot5998]

Just got into rod building a few months ago and your video and explanation helped me out for sure !!

[@TheFishingHobby]

@@kyleguillot5998 glad it helped and good luck with your rod building!

[@BeckhamHomeLoans]

Great info! Simple, concise, easy to follow! Thanks

[@TheFishingHobby]

Thank you!

[@ericpierce4510]

Really enjoyed the videos your putting out. Very easy to follow, and the information shared is spot on. Thank you for sharing.

[@TheFishingHobby]

I thought I had replied to you, but apparently I didn't> Thank you, I really appreciate it!

[@samhennies6493]

I use a similar method that locks the trim thread under the main wrap. I’m going to try your technique. Looks a bit more secure than my style. Hate it when the trim bands get loose. Thanks, Sam

[@TheFishingHobby]

It is always good to have multiple ways of doing things!

[@sandracrespo2164]

Good stuff

[@pasqualemancini9986]

Bravo sei stato molto chiaro nella presentazione, ok.

[@TheFishingHobby]

Grazie!

[@adventuresinrodbuilding]

Cool way of doing trim wraps! Every one has their own way, mine is slightly different..probably not as good..lol.

[@TheFishingHobby]

Whatever works!

[@adventuresinrodbuilding]

@@TheFishingHobby Yea this is true!

[@ibrahimozsarac4905]

Great workmanship sir, what kind of machine would you recommend for this beautiful winding workmanship?

[@TheFishingHobby]

I used the hand wrapper I make and sell. You can look at those here if you haven’t seen them: kzbin.info/www/bejne/pn-6eX5maNF7qNUsi=brZOPafHlKH2DwJc This is my store: 5286af.myshopify.com/ You can do the same thing on a setup that you can make yourself for free like like I show here: kzbin.info/www/bejne/rXamaZ6qn9GMis0si=v4xwJ3cFjPk6gneX The difference is the jigs I sell make it easier to do. There are power wrappers and hand wrappers of all sorts available and if you know what you are doing, you can get any of them to work out for you. What it really comes down to is what does the wrapper offer you that you want? To figure that out you can try something like the cardboard box jig for free. A jig like mine allows you to back up several turns to correct a mistake without loosing you thread tension. You might find that you would like that feature after using a cardboard jig (I’m so used to being able to backup without loosing tension that I find it difficult to wrap without it). So that really doesn’t give you a direct answer 😂 I enjoy making and selling my jigs, but I would rather someone get what they feel most comfortable using so they enjoy the hobby and stick with it. Cost is a factor, features are a factor, convenience is a factor…but the reality is almost anything will work if you practice enough to get good with your wrapping technique.

[@skatelife2013]

Thanks for sharing. Red/silver is such a great color combo . How do we get this same band when ending the wrap/on the foot of the guide?

[@TheFishingHobby]

Same basic procedure as what I show in this video but on the back side instead of the front 👍

[@leonardosan8111]

Hi, ty for sharing your techniques! 🎣 What size is the main line?

[@TheFishingHobby]

I’m using 40 weight machine embroidery thread in this video.

[@paulsteward1028]

Do you still build the wrapping set up?

[@TheFishingHobby]

Yes I do. Here is the link to my store: 5286af.myshopify.com/

[@garymiller-ed4bn]

I like your videos , would love to join in, is there a fee to become a member?

[@TheFishingHobby]

There is no fee to subscribe to my KZbin channel. If you click the subscribe button and click on the icon that looks like a bell there will be an option to select “ALL”. If you select ALL, then every time I upload a new video to KZbin you will get a notification saying that I have uploaded a new video and there will be a link that you can click to go watch the new video. I do not upload a lot of videos, but you will be able to know when I do. Also, when you subscribe to my channel, you may notice more of my videos showing up in your recommended videos. That’s about it for the most part. KZbin tends to promote channels that have more people interacting in the comments sections and people clicking the “Like” button. Also, the more subscribers a channel has, the more KZbin tends to promote that channel’s videos. So by commenting, liking videos and subscribing to my channel you are actually helping me out more than most people realize. None of those things cost the viewer any money, but they actually help me to earn a little bit more revenue from KZbin in advertising revenue sharing. I get a portion of the advertising fees that KZbin makes from the advertising that runs before, during and after my videos. It takes me a while to make each video. By earning a little money from KZbin, it makes taking that time and effort to make a video worthwhile. Viewers get the information they want from me and I get a little money for my time and efforts, but there is no cost to the viewer other than their time. Not too bad of a deal for everyone all the way around in my opinion! Thanks for watching and asking about subscribing to my channel! I hope you will subscribe and continue watching more of my videos. It helps me out and hopefully the information I give you in those videos is helpful to you as well!

[@garymiller-ed4bn]

Thanks, I enjoy your presentation@@TheFishingHobby

[@TheFishingHobby]

Thank you!

[@CasksnQue]

Hahah! First!!!

[@TheFishingHobby]

Score!

[@mohamedshrpine2904]

Very good

[@pauleyedwin6056]

Great information for a newbie. Subscribed, liked and shared.

[@TheFishingHobby]

I appreciate that!