How to increase Water Level in Front Load Washer

Here I will show you how to get more water in your Energy efficient Front Load Washer. A lot of the latest Front load washers went over the top with saving water...meaning too little water. Top loaders on the other hand are using way too much water and don't get your laundry clean. You should only do this adjustment here after your warranty expires to be safe, because it might void it.

[@ethanpn2003]

I thought I bought the dry clean washer by mistake. After 5 years today I found your video. Now I have regular washer machine thanks. :)))))

[@carolburmeister3044]

Who the heck decided for us that all washing machines should have stupidly low water levels.

[@rob6154]

March 7th, 2015 The DOE set up the strict laws governing the level of water in washing machines, it's around that date

[@carolburmeister3044]

@@rob6154 but top loaders still use normal water levels that hasnt changed.

[@rob6154]

@@carolburmeister3044 correct 💯👍

[@rob6154]

Some of the washing machines with no agitator use less water than normal and definitely the front load washing machines

[@CJWarlock]

And thus the clothes' fabrics remain soaked in washing powder residue and dirt residue because rinsing uses too less water for proper flushing of the remaining molecules. Hence the need for double or triple rinsing. That's some water saving... ;)

[@TheNotMeTube]

I have this same washer. If only I didn’t have the dryer sitting on top of mine I would do this. But if I ever need to open it up for repairs, I’m definitely doing this. The minimal water lever in these things just isn’t sufficient.

[@TheFrankman711]

And by the time the hot water from our water heater reaches the washer...it already stopped running

[@Adindastrawberry]

Thank you for this video. All these while I've been adding extra water manually using jug via the drawer. I hope there is no adverse effect on the machine.

[@mzking72]

This is what I have been doing, I don't want to risk opening my washer up and breaking something but I read to add through the drawer and that has worked its tedious but gets the water a mount I desire

[@mark98115]

There is no adverse effect. I did this about 10 years ago to my Samsung and it still work great. Before the adjustment I would open the door and use a hose to add more water. Then many times, I would miss the rinse cycle so I had to do re-do the wash, just to get the clothes rinsed properly. Basically the second wash cycle became my main rinse cycle. All that because some government regulators decided that a washing machine should only use X gallons of water. I am sure that running the machine twice, used more water than having enough water in it to do it right the first time.

[@jesspere6407]

When did you add extra water? At the start of the load, or during?

[@YhwhKhaiMostHigh]

@@jesspere6407 I personally add water a few minutes into the wash cycle after the water finishes running into the tray where it's mixing the detergent. So it's about 5 mins.

[@jayzee3303]

​@@YhwhKhaiMostHighhow much extra water do you use?

[@bhavikbhatt1111]

Very helpful finally I can wash with enough of water, I was going to get rid of this machine finally got the fix thanks dude for the video

[@iamtheiceman]

How on earth is that enough water to actually wash anything ? I am glad my top loader still works, because these "high efficiency" front loaders seem like they are skimping on water and the laws of physics to lie about cleaning things !

[@suzyq2426]

Exactly. I have this model and hate it. My clothes come out damp and sometimes they've come out completely dry. I have to sometimes do the same load 3x, how is that efficient? Not only a waste of water but time and electricity. Plus the cycles take forever. I only have till noon on my energy saver program with electric company, so I can only get in 2 loads before noon. I regret getting rid of my top loading Kenmore washer and dryer, they were 28 yrs old but they sill worked. I donated them to my son's friend who recently got married and needed a washer. While I've been manually adding water to my new washer, he tells me my old washer work fantastically.

[@alisonyew]

I totally agree! I've been struggling with low water levels on the machine since I got it 5 years ago.

[@jellybelly111]

@@suzyq2426 I agree. This type of washer has been such a nightmare. I have always taken clean clothes for granted until now.

[@terrorblossom4829]

@@suzyq2426 they come out almost dry because these things spin at over 1000 rpms

[@piecesoftheheart9231]

@@terrorblossom4829 - That’s it, exactly. The spin speeds literally do almost dry the clothes… I’ve had a really good experience with my 2 front loads over the last 12 yrs (gave one to my sis in law cuz I wanted a new one).

[@seatime674]

1 full turn isn't enough you have to do 1-1/2 to 2 full turns is huge difference, the water will come to the bottom of the door opening. You have to wait till the middle of the cycle to get the most water..👌

[@sharpgirlsSerious]

TOP LOADER FAN ALWAYS ! They get you Big Time at the Laundry Mat, with these machines ! They wash and rinse your clothes in a Teaspoon of Water ! I want my clothes Washed in Water ! Not Dragged threw a Gallon of Water !

[@UdayDhillon-t3o]

Yea top loaders are better especially the ones with the agitator and I kinda felt like they had a little more capacity than front loaders but yea top loaders are better

[@eddification]

OMG you're a money saver. Worked like magic. Turned it 3ce. I guess I'll have to reduce it because it seems water is too much now 😁. I love it

[@justmadeit2]

3 ce ? Did you mean 3 whole turns ?

[@pennyolson7356]

Takes 2 men & a dog to take the top off my GE front load. It's a stacking set & the dryer is on top of the washer. That dryer just isn't a feather weight object, thus the dog to lift & move it. I think the inventor of front load machines, & especially HE/low water, never did a lick of laundry before inventing this disaster of a machine. I received it for free when one of our children worked for GE & won it as a bonus for a job done well but who din't need it personally. Have battle with getting clothes clean in it since 2006 when we got it. I think I've martyred myself enough. It's going to find a recycling location one of these days.

[@phillv]

mine too , plus its in a closet, he lost me at take off the cover

[@wmgthilgen]

In addition to doing this, which actually does work. IF one has lower water presure as those in third world countries do. Who rely on gravity presure from tanks on their roof. There a little, generally blue in color restrtictor in one of the hose's that come from the generally black in color selinoids that supply water. Using a two to three inch long 1/8 in diameter screw inseted into the restrictor sufficently far enough to get a good bite on it. Then using a plyer's, pulling straight back, and it being very tight will take some doing. Pull it back and out. Replace the water tube. And the time it takes to fill to the level will be faster.

[@mark98115]

Years ago I did this to a high end Samsung. The machine was priced at somewhere around $1600 and could not wash anything properly. Two pairs of jeans would not even get completely wet. I adjusted the water level so that it comes up right to the opening for the door and now the machine works great. I don't blame Samsung for this. These same machines are sold in other places in the world where the government regulators don't have rocks for brains. Actually rocks would be an improvement. They have fecsl matter where the brains should be.

[@TheFrankman711]

Interesting

[@TheJingVin]

For LG machine I find that using the downloaded cycle Sweat Stain does clean cloth excellent, and I notice it use a bit more water. This is the first time I am totally happy when check the cloths.

[@pedrosmyth8366]

Frankman711: You mention that hot water is not necessary. This is frequently true. However, running a wash cycle with HOT water (especially the ones where the washer heats the water) about once a month will kill any residual mold & eliminate all odors. No special additives needed. The usage recommendations on most HE detergents are also quite conservative. Often, much less can be used; detergent levels should always be adjusted for load size and how dirt the clothes are. Reducing the amount of detergent will help prevent odors and mold. Finally, leaving the door cracked open after the last wash will help the drum dry out and prevent residual mildew formation.

[@katrinajohnson8432]

He was saying there was no need to waste hot water because he was only testing it for the video to see how much water it add.

[@craigcurtin3250]

🤦‍♂️

[@gabbarisback1642]

I also purchased the front load but I not satisfied with the water level.It takes so less water ,result in not cleaning the clothes properly. Top load is best..

[@tomquin9508]

if the screw gets stuck, scrape off the red glue. if it does not help, heat that part with hot air, be careful not to burn it. Then you can unscrew it easily.

[@halim.a]

Thank you for the video. It is very helpful. Nevertheless, perhaps you would consider to edit the video for it to focus on the important items that you want to highlight. Opening of top cover should be like 30 second rather than the whole 3 minutes without need to wait for the right screw driver to use or show the whole screwing process. The testing of water level should be like 30 sec as well. And the drainage... you shouldn't have to include the whole spinning. Also, there is too many silent moment in the video. Suggestion for you to focus on the location of the adjustment screw and how it is connected to the water inlet. Thank you again for the video. It give me some ideas 💡

[@TheFrankman711]

Thanks for the feedback.

[@wash36]

lucky me my mums washing machine always does high water level on final rinse like what i mean is it fills up to almost half way which is good

[@lushlemonco]

It worked! Thank you

[@jayzee3303]

It is said that if you add more water to front loads, it diminishes the efficiency of the machine as it is not "calibrated" to accommodate a "manual" fill.

[@rob6154]

Yes I had to do this to my brand new Samsung front loader 🎉

[@marlenesaddler1114]

These people are behaving as if water is a scarce commodity that takes billions of years to replenish.

[@charlesf5786]

1k whirlpool front washer won't clean my clothes because of its water saving feature i dump a 3 gallon bucket of water into the detergent dispenser tray during the wash cycle. ill try this

[@xavier1624]

I have a Whirlpool duet. It leaves my clothes dirty. When I add more water through the detergent dispenser, it finally starts to touch the water with detergent underneath, and it starts foaming and thus removing more dirt. These high efficiency washers are a failure and should no longer be produced.

[@TheFrankman711]

They just should adjust for more water in the first place

[@lucrecialara6097]

we do the same, hose in dispenser

[@CJWarlock]

And thus the clothes' fabrics remain soaked in washing powder residue and dirt residue because rinsing uses too less water for proper flushing of the remaining molecules. Hence the need for double or triple rinsing. That's some water saving... ;)

[@lifeingeneral9111]

That’s the same. You have to wash clothes to see the results.

[@jeanoneill653]

Oh my gosh! Talk about SLOOOOOOWWWW!!!! IF somebody is that slow , they have NO business messing w/ ANYTHING!!

[@seanpham8934]

Thanks so much. Hoo hoo I fix it!

[@ani108pe]

Thank you for the video!

[@cal87249]

Add more, just about the rubber sealing world of an italians we allways got front load!

[@TheFrankman711]

Yes, front load washers are the best. They clean much better and more gentle. I might add some more water in the future.

[@One-Day-After-Another]

this looks like how much water my 2005 Duet FL washer uses after your modification...I think LG's use more water for rinses so the rinse level might be even higher than the wash... I think you chose a good level you do not want much more than that or it's starts rolling the load instead of lifting and dropping.

[@TheFrankman711]

Good point. I also noticed that the rinse cycle uses more water.

[@One-Day-After-Another]

@@TheFrankman711 So when you said you painted it... I'm guessing you painted the area where the screw was and the screw housing so you would know exactly where to move it back? I've also heard you should put a little glue on it so it keeps its position in case of vibration moving it... I think that's why they put that adhesive on the screw

[@TheFrankman711]

@@One-Day-After-Another i think they put the glue on in order to check if someone tinkered with it. (in case you need to use your warranty.... it would probably void it). The screw is not easy to move, so I don't think it will move by itself through vibration. And yes, i marked the original position, just in case I would need to go back.

[@seanpham8934]

did you get notice when it was brand new or the first day you washed? try to remember that water levels, i did. This time it runs some what dry, it's time to adjust water level assuming you already clean the filters.

[@TheFrankman711]

I pretty much noticed on the first wash.

[@miahzzeebest701]

The factory puts red thread locker on there for a reason so you can’t adjust it. Not sure why 🤔 I stripped mine and now I have to replace the part 😂

[@TheFrankman711]

They put it on, so they know that you've tinkered with it and won't accept warranty if you're still under it and break something.

[@miahzzeebest701]

@@TheFrankman711 yeah I figured that’s why they do it. I was able to adjust the screw and the washer is out of warranty period anyways.

[@TheFrankman711]

@@miahzzeebest701 Yeah, I was waiting for my warranty to expire as well before I did this

[@grupoaline4468]

😊 thanks nice 👍🏻

[@Mupoco-bd1dl]

Thank you

[@TrustKnowWun]

This is great, but I'm wondering if the extra water weight will wear out the bearings or other parts sooner? Can the machine handle the extra weight?

[@TheFrankman711]

i'm pretty sure

[@TrustKnowWun]

@@TheFrankman711 Ok. Thanks for the quick response!!

[@TrustKnowWun]

@@TheFrankman711 OMG does this work!! I got my Kenmore to fill to 1/2 way up the glass on door. Kind of made me nervous, it was so much water, so I sat and watched the cycle and didn't see any leaks. Thanks so much! HUGE difference.

[@TheFrankman711]

@@TrustKnowWun Wow, don't put too much water. I only adjusted to the point that it just reaches the bottom of the glass

[@BASSER81]

I’m adding water to my washer for years with 3litre bottles as the wash begins. But this is amazing! I’m gonna increase the setting.

[@OsizweniDoors]

My machine fills and then stops after a few seconds. It donts wash. What could be the problem

[@justmadeit2]

I have a Bosch and can’t do it on mine be cause of a different valve without access to turn anything

[@TheFrankman711]

I had a Bosch and actually it was washing pretty good

[@justmadeit2]

@@TheFrankman711 The water level is low on mine, I’m having to use about 6 jugs of water in the drawer to get a decent water level inside the drum. I prefer the older machines from 20 years ago, this eco stuff with water is crazy

[@TheFrankman711]

Yeah I agree. I think they go a little bit over the top

[@jamesdenny6336]

that is enough water to wash a load of clothes a laundry basket full ?

[@TheFrankman711]

Yes, because the water level will be the same regardless of how much clothes you put in. Once the water is absorbed from the cloth, the washer will add more water to get to this level again.

[@ArgosySpecOps]

Front loaders are disgusting bro. Between the extremely low water levels, and the filthy rubber front sleeve/ring you may as well wash your clothes in a toilet bowl. I prefer HE to loaders any day of the week, and twice on Sunday.

[@Lanita929]

Water level is still the same. I really hate this washing machine

[@TheFrankman711]

Try the bulky/ bedding program, it adds more water.

[@eliorocha10]

Do more than one turn. I did like 4 or 5. In another video the guy put it all the way in and he got half of the drum filled with water. For me that is a little too much so I got mind just under 1/4 of the drum with water. Its really your choice. The more turns in you do the more water you get. Keep turning that screw in until you see results.

[@TheFrankman711]

@@eliorocha10 Agree. I did adjust mine a little more after making this video. I have the water level now just below the door, except at the bulky program...it is above the door.

[@jamesobriant1417]

Hey I now have the whirlpool WFW94HEAW0 i got it used and I can’t find the screw to turn it down anywhere

[@TheFrankman711]

Sorry I'm not familiar this one

[@jamesobriant1417]

@@TheFrankman711 oh well can you do some research please

[@jerbyabante9977]

Thank u

[@jamesobriant1417]

Could this machine handle a comforter?

[@TheFrankman711]

Absolutely. I already washed one

[@jamesobriant1417]

@@TheFrankman711 king or queen?

[@TheFrankman711]

@@jamesobriant1417 queen

[@BonBon-vx3qw]

Nah, Top loads are still the best, we need more water to wash our clothes properly.

[@yandracontreras1642]

Have someone done it in a whirlpools front load ?

[@TheklaSuktalim]

Good idea! But I have a beco... 🙁

[@danielletoussaint4919]

What do you do if you do strip the screw? Is there any way to fix it or is there a way to replace that part?

[@TheFrankman711]

I think you could buy a replacement part

[@littlesquirrel5007]

I HATE HE appliances, especially washers. Run them 2x to get as clean as my old washer. F'ing SUCKS.

[@boofive2541]

My screw is stuck, I’m scared to turn it hard, I may strip it.. good vid tho!

[@TheFrankman711]

You need to scrape off some of that red loctide stuff to break the screw loose.

[@sage0925]

@@TheFrankman711 That loctite is way down in the recess. Any way to get that stuff out without tearing up the part?

[@TheFrankman711]

@@sage0925 You don't have to get it out completely, just break it a little with a small screwdriver or knife and carefully see if the screw can be turned. Be careful not to damage the head of the screw because it's pretty soft.

[@sage0925]

@@TheFrankman711 You aren't kidding. I'll just do it myself this time. My husband, though I love him dearly, can be pretty heavy handed with mechanical stuff. Especially screw heads and plastic. Thanks!

[@equanimousawareness]

Acetone in a syringe or spray bottle. Use safety glasses. . Or locktite brand locktite remover.

[@CJWarlock]

There's a countable amount of water that's needed to dissolve a given amount of washing powder and an estimated amount of dirt. Using not enough water only leaves a residue of washing powder and dirt inside the fabrics and thus creates a need for a second washing (which wastes electrical energy). The same with rinsing - there has to be enough water to properly flush the said residues out of the fabrics (transport the molecules of the said residues). Insufficient water amount only makes it necessary to rinse twice or triple. Again: waste of electrical energy. The stupidly low water level in washing machines is an unscientific scam.

[@YhwhKhaiMostHigh]

That's still not enough water. The clothes can't get soaked and thoroughly cleansed in that pint of water :)

[@marlomena]

Is it possible that the level screw is glued so it can’t be adjusted? I can’t seem to turn the dial without stripping the rubber piece.

[@TheFrankman711]

Yes, it has some kind of red loctite around it to keep it in place. You need to break it a little to make the screw moveable.

[@MrWl4148]

Does this void the warranty?

[@TheFrankman711]

Not sure, but I would think so. That's why I waited a year before I did it.

[@navaa1477]

Can this be done on a Bosch 6 or 8 Series? Considering buying a new front loading Bosch machine but dont know if I will run into this water issue.

[@TheFrankman711]

With the bosch it is probably not necessary because they do a fantastic job in cleaning the laundry regardless of the water level you will see. Just came back from Germany and had a series 6 machine for 2 months and had no complaints

[@pkgonzela5362]

Won't it be a lot easier, just throw a bucket of water in there before you shut the door?

[@TheFrankman711]

If this is convenient for you....sure.

[@jennwilson815]

I have a samsung and it has “smart technology” If it senses any water weight when i hit “start”, it automatically drains it before beginning the new wash cycle. So in my case at least, i cant add water to the drum before closing the door and hitting start or the machine will just drain it instantly. I dont know if other machines do this, but i saw your comment and wanted to reply because adding a gallon or two of water manually from the start is not an option for some unfortunately

[@pkgonzela5362]

@@jennwilson815 Glad you brought that up. Mine ain’t that smart. Now I wash in delicates cycle because it uses more water. I did have Samsung years ago. It wasn’t front load, but would do exactly what you said.

[@craigcurtin3250]

Adding a bucket of water before every load of wash VS. a one-time adjustment 🤔 Hmmm

[@margaretjerkins850]

What washing machines have an adjustment screw does this work for whirlpool duet?

[@TheFrankman711]

Should work for every washer. Might look slightly different.

[@Nathandrake1997]

Hello does this trick apply to front load of Samsung? Thank you

[@TheFrankman711]

Should work on every model, just may have different layout

[@Nathandrake1997]

@@TheFrankman711 thank you!

[@jamesobriant1417]

Do you know how long you would need to wait for the warranty on an LG Front Load Washer?

[@TheFrankman711]

Sorry no, fortunately I didn't need it so far.

[@jamesobriant1417]

@@TheFrankman711 oh thanks anyway

[@billjuss5331]

Does this process for increasing the water level also work for the

[@TheFrankman711]

Should work for most washers.

[@Ohkeh640]

@@TheFrankman711 which way do I screw ?

[@TheFrankman711]

@@Ohkeh640 You have to turn it right.

[@enesb.114]

Which way does it take in more water when you turn it?

[@sandrawicker994]

I have a kenmore He4, I don’t seem to have a water flow adjuster! 😕

[@TheFrankman711]

Maybe it's in a different location.

[@sandrawicker994]

@@TheFrankman711 I’ve looked everywhere, I’ve looked for items that don’t look like examples. I have noticed at water intake, hot and cold, 2 (looks like Phillips head), BUT in the center is a small spike, preventing adjustment. Also another inline part, has a head but not straight or Phillips head. Can’t see what would work.

[@TheFrankman711]

@@sandrawicker994 it is hard to tell you something without seeing it.

[@Gabrielle937]

Would anyone know how to increase the water level on a Miele W5873. I've looked for the screw and cannot seem to find it anywhere.

[@TheFrankman711]

I didn't think german washer machines would need the water fix as well

[@Gabrielle937]

@@TheFrankman711 It does, it takes in very little water except on one program setting. Was able to make the adjustment on an LG front loader though just cannot see anything similar on this machine, though I'm sure it's there.

[@RoyMane]

Yoooo, that’s not enough water

[@TheFrankman711]

I know, I adjusted some more.

[@skipads5141]

😀😃😄😁😆😅😂🤣 I could chug more water than that.

[@asemdghem496]

No enough water ur adjustment was didn't work

[@TheFrankman711]

Well, before the adjustment you couldn't even see any water. I might increase some more anyways.

[@CactusJackSlade]

Another AI ROBOT VOICE. I went to another video to find out how to do this.

[@carlosbeltran6510]

👍

[@brandondimmitt8467]

Wow that’s more water lol.

[@TheFrankman711]

You should have seen it before, there was almost nothing... But I've adjusted it since then to get more

[@brandondimmitt8467]

@@TheFrankman711 good deal I just sold my front load and went back to a top load. Happy so far kinda wish I woulda got one w a agitator tho. Consider that if u change to top load

[@RoyMane]

02:48 🤣🤣🤣🤣🤣

[@loadmastergod1961]

Fucking computer voices get dislikes.

[@duncan3417]

I understand why you did that, but, your going to cause water to go places it should not be. You will have leaks and machine damage. Good luck.

[@cal87249]

😂😂😂😂😂😂

[@cadonbarton1933]

My front loader (2004 Whirlpool Duet 3.8 cu.ft HT front load washer) fills up to the door. I have never had a leaking issue out of the almost 17 years of having it.

[@equanimousawareness]

I tried this and my entire town is now under water! I had to buy snorkel equipment for everyone person. judges order!

[@RogerRamjetLips]

@@equanimousawareness haha

[@Juliaswrld158]

@@cal87249 Tube cleaning, gentle and hand wash also take more water and it doesn't spoil anything

[@t2alds]

You still need more water than that

[@TheFrankman711]

i know, I've already adjusted to get more.

[@iconoclast4440]

TEXT TO SPEECH SUCKS!!!!!

[@lifeingeneral9111]

Holy shit do we have to do we have to see you unscrew every screw with every twist learn to edit

[@tmorales1409]

Or you could learn how to fast forward!🧐

[@russelldurtschi]

What is with the goofy voices in these videos?