Hillman Imp 1200cc (stealth engine) in a standard height block build / dyno test

  Рет қаралды 13,632

ShrigleyTube (Andy Jones)

ShrigleyTube (Andy Jones)

Күн бұрын

Пікірлер: 59
@andrewwmacfadyen6958
@andrewwmacfadyen6958 2 ай бұрын
I once had the privilege of trying a Clan with an 1140 Carter full race engine the difference in torque over my 998 Hartwell engine was incredible
@carloswheeldon2553
@carloswheeldon2553 Жыл бұрын
Its nice to listen to somebody who knows what they are talking about. 👍🏁🏁
@thehillmanator
@thehillmanator Жыл бұрын
Thanks for kind comment, i make most of it up as i go along 🤣🤣
@carloswheeldon2553
@carloswheeldon2553 Жыл бұрын
@@thehillmanator thing is , thats how engine building go’s you encounter an issue with clearance for example you deal with it! 👍 its all a consideration! Keep up the great work! 🏁🏁
@simonjoanna2432
@simonjoanna2432 Жыл бұрын
Andy, great to see the Imp engine still being developed! I once owned a Paul Emery 1150 engine, I never had it running as I dicoverd a crack in the block under the centre main bearing, it was a Mk1 block and really not ideal...super video, thank you.
@thehillmanator
@thehillmanator Жыл бұрын
Thanks for the info!, i have a paul emery block may do a little video on it
@stevecmason-rs6vf
@stevecmason-rs6vf 8 ай бұрын
Great explanation about ratios and burn etc. Gave me more insight than I'd had before. Thanks Andy
@thehillmanator
@thehillmanator 8 ай бұрын
Glad you enjoyed it
@byronmills5952
@byronmills5952 Жыл бұрын
Marvelous! 👍👍 Shall be very interesting to see what exact figures it makes after mapping. 😊
@havenview
@havenview Жыл бұрын
Ian used to spend *hours* grinding out the ports on the heads, all by eye using a die grinder on a flexi shaft to his pillar drill, constantly checking wall thickness. They all looked identical at the end.
@thehillmanator
@thehillmanator Жыл бұрын
hi steve, well if you ever want a job….
@briangomm8391
@briangomm8391 Жыл бұрын
Nice one Andy, great to see you're still developing these engines.
@thehillmanator
@thehillmanator Жыл бұрын
thanks yes always trying new things to try and squeeze as much out as possible 🏁
@simonbertioli4696
@simonbertioli4696 Жыл бұрын
Very very interesting...l shall send it to my son in the UK. Yup one always learns...even at 68.. 👍👍 Can't wait until the next video appears....
@bwautoian
@bwautoian Жыл бұрын
Enjoying your vids from here in the States! Will be in touch once I know what we’re working with between my two Mk1s. Good luck this season!
@thehillmanator
@thehillmanator Жыл бұрын
Thanks, you too!
@timpayne8238
@timpayne8238 Жыл бұрын
Great vid Andy, that engine sounds sweet. - You're quite an engineer and I admire your confidence testing a new engine although I imagine they're pretty strong internally.
@thehillmanator
@thehillmanator Жыл бұрын
Thanks, yes very strong engine even in standard form! I get bored with repeat work so always looking to spice the job up a bit ! Even if it doesn't work always a learn to be had !
@Ralph2
@Ralph2 Жыл бұрын
Lovely. Wish I still had my 998, great little cars.
@raymond_rayder
@raymond_rayder Жыл бұрын
This is awesome, Andy. Didn't realise you were even making videos.
@thehillmanator
@thehillmanator Жыл бұрын
More to come!
@sonnyjimbod
@sonnyjimbod Жыл бұрын
Really interesting video! Would be nice to see what sort of figures it puts out once fuel injected.
@thehillmanator
@thehillmanator Жыл бұрын
thanks, i am thinking of doing a follow up video at the engine shop where it is been mapped 👍
@looneyliron
@looneyliron Жыл бұрын
Great video Andy Your the conductor of the Orchestra bring it altogether, can’t wait to get my engine to you 👍
@thehillmanator
@thehillmanator Жыл бұрын
Thanks 👍
@TonyJewell0
@TonyJewell0 Жыл бұрын
Very interesting video - thx for taking the time to explain all this.
@andysaunders3708
@andysaunders3708 Жыл бұрын
Beautiful engine!
@trsfc1595
@trsfc1595 Жыл бұрын
Nice Work
@skamanfrank
@skamanfrank Жыл бұрын
Cracking video Andy, awesome looking engine too!
@thehillmanator
@thehillmanator Жыл бұрын
thank you
@chevyimp5857
@chevyimp5857 Жыл бұрын
Great video... So many nice bit on this engine.. sweet
@thehillmanator
@thehillmanator Жыл бұрын
thanks, looking forward to seeing how it goes on the posh dyno for mapping
@finlay230
@finlay230 Жыл бұрын
great vid, very interesting
@thehillmanator
@thehillmanator Жыл бұрын
Glad you enjoyed it
@gothicpagan.666
@gothicpagan.666 Жыл бұрын
Ports of that size are allways going to make torque high in the revs. Old factory R17 is still above 5k on a 1.2 bottom end. Never stop learning👍
@thehillmanator
@thehillmanator Жыл бұрын
every day is a school day !!!
@wendellfugate4225
@wendellfugate4225 Жыл бұрын
Looks pretty clever. Cheers!
@thehillmanator
@thehillmanator Жыл бұрын
Thank you! Cheers!
@peterjohn3180
@peterjohn3180 Жыл бұрын
That cam looks brutal! Could you run longer rod and piston with gudgeon pin closer to crown and run single ring and oil in fuel?
@darthbarmey6482
@darthbarmey6482 11 ай бұрын
excellent, I want one 😀😀😀😀
@peterjones7935
@peterjones7935 Жыл бұрын
Why no support for the rear main bearing? If thats the one that has as much, if not more load that the other two, with flywheel & clutch loads, etc?
@thehillmanator
@thehillmanator Жыл бұрын
hi, the rear main cap is fully supported down each side by the block and has the sump bolt to it as well, it is simply better left untouched in my opinion, the caps are made from LM 24 and very strong.
@williamallenfranklin
@williamallenfranklin Жыл бұрын
With the wrist pin shrouded how does it get lubricated?
@thehillmanator
@thehillmanator Жыл бұрын
Hi, the top of the rod is drilled to aid lubrication.
@MrT01582
@MrT01582 Жыл бұрын
Hoping for a lottery win so I can get the 3 cars I've wanted forever
@thehillmanator
@thehillmanator Жыл бұрын
Me too !
@andysaunders3708
@andysaunders3708 Жыл бұрын
Weird. I always believed that longer stroke meant more torque. Or have I missed the point?
@thehillmanator
@thehillmanator Жыл бұрын
yes your dead right, this is more about the rod length which is nothing to do with the crank stroke, i will try to explain more in my next video 😂
@philiphoyland6619
@philiphoyland6619 Жыл бұрын
Great stuff will you build me one?
@thehillmanator
@thehillmanator Жыл бұрын
Sure, why not
@Tal5258
@Tal5258 Жыл бұрын
What brand is the pistons Omega?
@thehillmanator
@thehillmanator Жыл бұрын
these were cp
@maryginger4877
@maryginger4877 Жыл бұрын
I'm guessing its going to make 100 BHP - and be driveable... impressive .
@thehillmanator
@thehillmanator Жыл бұрын
follow up video coming soon, yes hopefully 🤞
@stevegeikow7146
@stevegeikow7146 2 ай бұрын
Cam an imp engine go a 100,00 miles? Tia.
@orange6079
@orange6079 Жыл бұрын
Cool
@bobawatsit
@bobawatsit Жыл бұрын
torque > hp is all in the cyl head and cam, the intake and exhaust tubes will allow you to tune as will cam adv/ret crickey 11.5 : 1 gotta be a lot of O/L on that cam > can you post specs lobe accel and velocity numbers would be nice
@thehillmanator
@thehillmanator Жыл бұрын
Hi, sorry cam figures are secret to my cam designer bob jones,he uses a lotus software to design the profile, lots of red boxes but he knows what works ! 11.5 tame for short stroke imp
@bobawatsit
@bobawatsit Жыл бұрын
@@thehillmanator No worries, I can figure out pretty close to what it is, no real secrets when it comes to performance orientated design. looks like you are well over 0.25 L/D, duration is not that short and lots of spring
Hillman Imp full race 1150cc imp engine build part 1… the ingredients 🤣
7:02
ShrigleyTube (Andy Jones)
Рет қаралды 8 М.
Чистка воды совком от денег
00:32
FD Vasya
Рет қаралды 5 МЛН
I thought one thing and the truth is something else 😂
00:34
عائلة ابو رعد Abo Raad family
Рет қаралды 21 МЛН
Hillman Imp 930cc engine pricing and conversion to fit in Imp process.
1:13:34
ShrigleyTube (Andy Jones)
Рет қаралды 2,6 М.
The IMPact of poor choices - the Hillman Imp Story
22:49
Big Car
Рет қаралды 645 М.
Let's Talk Cracked Engine Blocks
13:33
Uncle Tony's Garage
Рет қаралды 109 М.
The Greatest V8 Ever Was Built In Just 90 Days
12:43
Rare Cars
Рет қаралды 291 М.
We turn 2 Lada inline-4's into a V8
13:56
Garage 54
Рет қаралды 407 М.
Hillman Imp how to dial in a unknown race cam- GB 72
37:48
ShrigleyTube (Andy Jones)
Рет қаралды 4,8 М.
Hillman imp turbo special saloon engine
8:21
ShrigleyTube (Andy Jones)
Рет қаралды 6 М.
Chaotic Pre66 5 way battle - Brands Indy
13:22
James Ibbotson
Рет қаралды 16 М.
Чистка воды совком от денег
00:32
FD Vasya
Рет қаралды 5 МЛН