🔩2005 Honda CRV P2646 Vtec Problems Easy Fix

This is an attempt to show you a vote failure on this 2005 honda crv, due to screen recording problems the video is not up to my standards but i still believe there is good information for you to use.
Gratitude paypal.me/HomieHektor

[@themechanicla994]

Awesome, another car fixed without replacing any parts. You’re a good man Homie. I told you you were gonna blow up congrats on 10,000 subscribers 🙌🏼

[@sugarfree6251]

Man Homie Hektor, I've been on a binge with your videos, lad i found your channel. Im learning more about cars, thanks for what you do.

[@treelineresearch3387]

My 04 just exhibited the same symptoms and code, was really thinking I'd be looking at something like doing a junkyard trans swap because I didn't even know this thing had a limp mode governor and it felt like it wasn't going into upper gears. Thanks for including the whole diagnostic process I can run thru rather than just the fix!

[@henryramos378]

Very nice diagnosis! I work close to there. Looks like you passed mount SAC. I work by temple and valley . Keep up the amazing work and hope you enjoyed your Thanksgiving.

[@Volusiaev]

You are a genius at diagnosing! Another great video man.

[@popz5518]

Those engines also have a passage screen that sits behind the power steering pump bracket on the opposite / front side of the engine that also gets clogged up. Strongly recommend cleaning that one as well.

[@HomieHektor]

popz 55 yeah, that’s true. We’ll get it on the next one 😎

[@mikecont9742]

Really informative. Great diagnosis videos. I have been trying to watch all your videos. Your Diagnosis process is just like eric southmain auto and keith. Invaluable info.

[@HomieHektor]

MIKE CONT Thanks, appreciate that 🙏🏼

[@HomieHektor]

Eric and Keith...My Uncles 😎

[@ryanforristall8642]

Great videos, glad i found this channel!

[@richardkingston5238]

Cheers from Scotland, and thanks, great stuff mate.

[@akiramiyazono]

Man, when you were checking the switch and said "man, está cabrón" I felt that

[@SawmillRoad]

Helton New to your channel. I appreciate the way you explain things on your videos. Awesome Thanks

[@billydo5376]

Thank you for uploading this video, my had this problem, I’m going to try to clean it , Thank you so much

[@monstersquashracing]

Great video homie. Traffic is insane.

[@HomieHektor]

Monster Squash Racing California 🚗🚕🚙🏎🚑🚚🚛🚌🚒🚌🚎🚐🚗🚗

[@frankgiancola7]

Thanks for the info I have the same code on my Honda Crv and I'm going to attempt to clean it .... I liked and subscribed .

[@theroyalone7588]

What did you have to clean?

[@zanesam2667]

What's good homie happy holidays to you and yourz, just stumbled upon your vids about a month ago and been digging all the content so far dawg, keep it up. I recently got back in school to make It official and love the chingon passion you got for this line of work homie. (And yeah Fuck them lame haters G keep doing you)

[@zl1bandit684]

New video HomieZ!!!

[@masterofself97]

Thank u for being so informative and helpful! Got my sub! Peace

[@vegitagt]

Replaced the entire valve spool assembly on my 05 accord and the issue didn't go away.

[@everardocamacho5063]

Muy buen video hektor, no tengo mucho mas que decir, creo que esta muy claro, eres lo maximo como tech,espero conocerte un dia en persona,yo amo la mecanica y me gusta un chi go trabajar en carros, y aprender todos Los dias, that why I watch yours videos, un saludo desde Ontario California #hookituphomie.adiossssss

[@rivierabuick]

Great video, great tips. Thanks for Sharing.

[@HondaTrumpAi]

Easy fix / 25 minute video **Me pressing play speed x1.5**

[@freddydee270]

Another great video. Hey Hector, did you get a new scanner? If so what did you get?

[@HankAttack89]

Great video man. Hope you do another day in the life video, they’re great. 👍🏾

[@jestep9]

Excellent video all the way through,

[@kennethmckee4223]

Great video!

[@dexterdexcool7699]

Never disappointed with your videos, when is the next giveaway??

[@darylRvillaescusa]

Hey I just started watching your videos. I hope you do a lot more diagnosis. I like to learn. You should use a GoPro. It has lot of mounting option and easier to take it around

[@joaquinvalenzuela3868]

Good shit, your video helped me.Keep them coming.

[@redbird4481]

You Rock Homie Hektor o_o ^_^

[@jestep9]

Excellent video thanks a lot!

[@aliz7936]

Thank you very much!!

[@heyitschinoable]

Good vid homie

[@meno2203]

Dope video homie 🔥🔥🔥

[@HomieHektor]

Meno 220 Gracias 🙏🏼

[@MoriyonIpuole]

Hola Señor @Homie Hektor quick one: I have a Honda accord 2005, that starts to vibrate and make a sorta rattling noise when I Turn on my car a/c. usually, the vibration and noise is more pronounced when i come to a halt at a red light or the car is on Park, at times the engine goes off and all the lights on the dashboard come on and I have to restart again. ¿what could be wrong here?

[@Riviaus]

I have a 2001 Honda prelude and it stays on only when my foot is on the gas. Do you have any advice?

[@user-zd4qx2ij6b]

hi thank u share .we try fit it myself the problem.

[@martinarrieta248]

Grasias por El video

[@HomieHektor]

Martin Gracias por mirar 👍🏼

[@eduardomorales1848]

😆😆excellent videos megusta tu onestidad

[@HomieHektor]

Eduardo Morales gracias por suscribirte 🤙🏼

[@Para-ni5lx]

Hello Sir can solenoid and pressure switch can be bought separately ?? THANK YOU

[@larrylucas5731]

Nice work Homie! If you make your livin with the scanner buy ya a new one. Later!

[@HomieHektor]

larry lucas I might, just might 🤷🏻‍♂️

[@dylanmartinez8885]

Love these videos👍

[@HomieHektor]

Gracias 🙏🏼

[@nareshvij3663]

Appreciate you.

[@jtnm1746]

Hey hektor, u have great videos bro,slot of info,thanks..I like ur cap bro,i also do alot of diagnosing, where can I get one like urs?..

[@HomieHektor]

Joe Tisi I’m working on making them available for you guys 🤙🏼 soon hopefully

[@xbigbobsagetx]

Same issue with my 05 crv. Replaced the solenoid and the check engine light and stutter came back within 5 miles. This was also done with a fresh change of oil. I’m about to pull my hair out over this issue...

[@Rob-me1ic]

Did you figure it out? I'm having same issue. New solenoid assembly and both filters cleaned. Plus engine flush and new oil.

[@xbigbobsagetx]

@@Rob-me1ic nope I gave it to my mother in law and she’s literally drove it everywhere with this issue. She just builds momentum and pulls hills with little issue. I think it’s electrical since if the oil pressure was really that low the motor would have died a long time ago by now. Iv moved on though and won’t get a Honda again.

[@Rob-me1ic]

@@xbigbobsagetx I'm having the exact same problem. Tried all the fixes.

[@brassmule]

​@@Rob-me1icdid you clean/replace the other vtec screen next to the power steering or replace the oil pressure switch? There can also be electrical connectors issues with the plugs to the vtec spool assembly that you replaced (and non-OE units tend to be crap)

[@Rob-me1ic]

@@brassmule Old reply, but yes. I stated I cleaned them both. Ended up being water in my VTEC assembly plug. I sprayed electronic cleaner in it, and it fixed it right up.

[@abrahamgutierrez8405]

Hey bro, I have a 2006 crv awd. I have multiple misfires. Replaced coil packs, plugs and fuel injectors. Oils just changed, air filter, the intake hose was cracked and i replaced that. 200k miles. It tends to tremble when I come to a stop, what do you recommend?

[@YuriVargasDIY]

My Hector my smart man all mine we love you baby 💕

[@thedudeofshaving1749]

Save some for me

[@HomieHektor]

Xx The DudeTech xX Hahaha 😂

[@thedudeofshaving1749]

Lmao 👍

[@MadMonk67]

4-year old video and I found it because I have this same issue. Was the cleaning a lasting fix, or did he eventually have to replace the assembly?

[@DRIVEFROMHOME4K]

cheers mate.

[@Bikerboi]

How does it get clogged? Just dirty oil?

[@lovetheoutdoors9485]

I need help. There's a sensor on the left side of the engine below the cams that has a blue connector with a blue wire and white stripe line and the black one. What's that sensor called? Someone broke that wire off the connector and I can't find one crv at the junkyard. Thanks

[@Bigperro59]

Thanks bro

[@daydayjones7740]

I put a brand new one in 2006 Honda CR-V it’s still doing the same thing what should I do?

[@quietkey2003]

thanks man.... peace

[@saraleinen6889]

I love this video cause it is so down to earth!!! i just need to know is p2646 bbank 1 or bank 2

[@brassmule]

This is a 4 cylinder engine so there's not really a bank. It's bank 1 here if listed on the pids.

[@mrmac305]

I replaced the vtec valve assy but still getting code. What am I missing??

[@mcont2747]

Great diagnosis video.

[@dhestondh]

Gotta love the haters either way they watching so that's just another view keep doing your thing hektor

[@jamilticriti7308]

Hi, i change the vtec for crv 2003. But when the car exceeds 120 kmph, the gas pedal is disconnected and I cannot accelerate. And the car is churn. I had to slow down. Is there a solution please

[@jamesu]

Thanks Hektor!

[@root2k7]

my CRV dies when I take my foot off the accelerator. What can it be?

[@johnstarr2001]

Why my 05 cr-v has the bar type? This video it looks like a brick? The Honda Accord videos has the same as my CR-V?

[@billycurtis5788]

That hat!!! I want one!

[@jeffcurrie123]

just FYI for anyone changing one of these out make sure you pay attention to the connections because the one on the right when you put the connector back on it can go on 2 different ways and you will think its on and connected but its not.. ask me how i know.

[@brassmule]

How do you know? 😂

[@zyn1991]

I have 2006 accord, do u know if I can access to those bolt from the passenger wheel side? It's important to unbolt from the top.

[@HomieHektor]

zyn19910201 Not sure, but it should be pretty similar 🤙🏼

[@Gevans5472]

On my 05 Accord, easiest access is over the top of the engine

[@perverso12345]

Min 2:21 " donde estas cabron "lol great video brother, Viva la Raza, I definitely will subscribe.

[@haroldmorgan7381]

My car has the same code BUT it has the WARM UP before it does the HOP HOP HOP !! The OIL has to warm before that screen restricts the flow - the V-Tech turns ON at 19 PSI Oil Pressure !!

[@mctran41]

Hey I have the same missfiring problem and I bought new solenoide but it is still missfiring. What do you think might be the problem ?

[@HomieHektor]

Something else…

[@adakolebest4666]

Hello Homie; My 2005 CRV has a very poor fuel economy at 11MPG.. Manufacturer average is 22MPG. 105km trip took 21.8 liters of petrol... Changed the Airflow sensor, plugs are fine... In your experience what needs to be done to fix this issue?

[@ThatDIYguy403]

Check your rear brakes. Sometimes they drag and need servicing.That was an issue with my 2002 CRV

[@abeltorres3690]

Where are you located

[@KalimbaSpirit]

Hello, My 2002 CRV is losing power, limp-mode at 4k RPM's. I believe this is my issue.

[@xelamemasinag7334]

Can u show what problems for crv too much smoke coming out from exhause

[@gw5479]

Could be head gasket... A lot of times more smoke means either burning oil, or burning coolant.

[@hunkydude322]

those guys with the thumbs down most likely work for McDonalds or Burger King, cause you know they don't have enough sense to even change a spark plug.

[@nathanield.4527]

LOL, Chingadera sure sounds better than thingamabob! Hektor, I have that P2646 code and replaced the entire vetch solenoid/filter with a Honda one, and also changed the vtec strainer behind the tensioner. Has that ever happened to you? what else can I try?

[@brassmule]

Oil pressure switch just below the vtec spool assembly that you replaced, and confirm your electrical connectors to the spool assembly are good. Sometimes they get corroded and a new pigtail is required.

[@Stoically_]

Make the mechanic hoodie black with white or red letters 💯

[@randywilliams2444]

Cool Beans

[@jojojeep1]

Hector, my 13 CRV just started to get that rattle when you started in the morning , I guess it’s the VTC actuator, is that supposed to trip a code. And is there anything I can do for it to go away like cleaning the screen or anything like that please respond thank you. By the way don’t you hate haters they should just go away

[@pdennis]

Does this work for the Honda Element?

[@brassmule]

Same engine, so yes.

[@todotune2767]

Where you get that hat

[@tanerayvaz2590]

Viteecx kaç devirde devreye girer

[@Gevans5472]

Easiest access is over the top of the engine

[@6exybig]

What vtec solenoid would you recommend buying?

[@charlescooperderose8872]

Try the one that's for your vehicle.

[@samuelgranados776]

Same shit happen to me when I was trying to replace my Honda distributor the want 400 for little Distributor Ignition Control Module and the distributor itself was 200 Ahha

[@applepoop10]

Do you save fuel when VTEC doesn't engage?

[@brassmule]

You have to drive like Grandma with slow acceleration, keeping it at or near 2500 RPM before shifts, which limits your top speed... So yes, you save fuel lol. Not a great or safe way to travel routinely, as you cannot "mash the gas" without severe engine bucking that'll wreck your motor mounts and possibly damage your drive train components.

[@Samsos609]

bro I replaced this piece 3 times within 3 months it clogs again . I don't know what to clean or check for I changed my oil and oil pan the last time I did this idk what else to do

[@MakeItHappen223]

You ever find the fix?

[@alejandrosalcedo7413]

Hektor when the oil is too dirty the VTec doesn't operate properly....

[@ehabgh1846]

لا يوجد كهرباء في مأخذ vetc ما المشكلة

[@tikvahspagepage8760]

I spent so much money and still getting the code. Started with overheating and blown head gasket. Codes be bouncing. I don't have a virus d10 :-( Need a honda man.

[@phensriwood8081]

On Odyssey K24 you have to get it from underneath .

[@CLUBBY261]

got mine out from the top

[@bubbachilders99]

Rip to hectors job man

[@HomieHektor]

clayton 💀

[@tbirdstube2618]

We’re can I find a vacuums diagram

[@HomieHektor]

Maybe Hoover or Dirt Devil… 🤔

[@wsuapplicant7468]

Thanks for the video. The same codes p2646 and p2647 and I put a new part (vetch switch) but the problem is not fixed. What other suggestions you have for me? Thank u.

[@josenazario4316]

Same problema me...fixed..

[@josenazario4316]

Change the part the light is on again

[@nareshvij3663]

Sir where do you live

[@HomieHektor]

My house 🏡

[@markus7n]

ur from sgv? cool

[@HomieHektor]

Marki7n Pomona 🤙🏼

[@aviddiaz5612]

Fresh kicks homie were do you work at i have some work for you i live in cali to shoot me your info

[@HomieHektor]

Avid Diaz DM me on Instagram, I’m in Pomona

[@philh9238]

Sell me that scanner 😂

[@HomieHektor]

phil holbrook too expensive 😎

[@64impalaSSRealMechanic315]

Sometimes just changing the oil fixes the problem lol in most cases i usually get whole unit with both sensors not much price difference really.

[@codyarmiger94]

Yoo hektor

[@jonathanblanco7355]

I have a Dodge Charger 2010 and the steering wheel got a little hard does anyone know what can it be. ?

[@BDONG-ob1gc]

jonathan blanco - Need to check power steering fluid

[@jonathanblanco7355]

The power steering fluid is good and I did a flush and is still the same

[@angelisone]

Take out those O-Rings and replace them from the Power Steering Pump. Replace also the Low Pressure Hose that goes into the Power Steering Pump. Make sure the Power Steering Reservoir's Filter is cleaned.

[@adamsview6091]

Not the same as vvt.