Their whur mistakes. they were maid...

Рет қаралды 9,661

Ай бұрын

Пікірлер: 46

@monday7352 Ай бұрын

Love the amount of dedication you show for your work. You see a slight imperfection and say “Nuh uh we can do better.” Lol, gives me a lot of confidence in eventually ordering a model from you

@VagabondTE Ай бұрын

The way you say I don't know what I'm doing is so funny 😅

@TheFluBugZ Ай бұрын

Yeah... make sure you mix the proper amounts together. Having worked with epoxy and resin at work, you need to make sure the parts are in proper measurements to the other. If they aren't they'll either set far to quickly or will never really set.

@ultilinium8 Ай бұрын

The creative process, am I right 🤷🏿‍♂️

@slickpuller8801 Ай бұрын

Glad with the job and life changes u kept going with all of it keep it up love what u do U R AWESOME 👍😎

@miguelbarriga4890 Ай бұрын

Appreciate all that you do! Just got into 3d printing and been watching your channel for advice and what models look good to print😂

@WooperChannelYT Ай бұрын

Hey, just got my new printer from anycubic and had similar issues, my recommendation from my similar issue on leveling is 2 things; treat it like a tire; go loose fit from side to side, then once everything’s loose tight, get it really tight. And second off, try messing with the base values in the slicer.

@Harry-cj3yu Ай бұрын

You are both an inspiration and currently being used as an example by my wife as to why I shall not be getting a 3d printer anytime soon lol. You're awesome keep up the amazing work

@FreyasFantasys Ай бұрын

As far as an ADHD sink for hobbies, it's a never ending thing. It's the hyper fixation to end all. I can't stop. The projects change, but the printing keeps going. And im just filming what ever I'm doing. And now I'm making money from KZbin and tiktok. For just doing what I was already doing! Stuff just keeps falling into place. It's a PROBLEM 🤣

@DUxMORTEM Ай бұрын

@@FreyasFantasysSounds like when I did custom conversions for Warhammer 40K. I made a whole or armour out of bitz...

@bobbiac Ай бұрын

The runny stuff is the activator? You probably had some old resin in the old one.. never mix batches of resin. Try spritzing some part b on Yor with a clean spay bottle

@edgargad2941 Ай бұрын

One of your build plates for your resin printer looks warped (the one with the masked character that had the separation issue). That plate looks bowed in the middle which would explain the issues you're having.

@FreyasFantasys Ай бұрын

Well, it is over a year old. But how could the metal warp it's so thick

@edgargad2941 Ай бұрын

@@FreyasFantasys if that printer is constantly printing in the same spots the forces influenced on the surface (heating, cooling, expansion, contraction) will eventually deform it. Think of it like death by a thousand cuts.

@GustavoPereira-xw4zh Ай бұрын

the furry character whit the mask is caled kindred from league of legends.(the lore is cool)

@user-bb6po9oe5s Ай бұрын

Wooooooow miss lady samus looks really great the suit detiles is really great. Yu is giving you so much trouble we can thank the goddess that you didnt print a yu with sumthing down there 😊😅😂😂 keep up the great work

@Spartan-lb9gh Ай бұрын

That kindred (I think that’s the name) looks interesting lots of of fur

@user-AADZ Ай бұрын

3:01 fur 2b goes crazy 🤯

@TheForbiddenHeaven Ай бұрын

Can you use a small hot scalpel to fix this like they do with 3D pens or is this material not as forgiving?

@FreyasFantasys Ай бұрын

It's surprisingly hard to control melted plastic. U push it but it does not really smooth. It's like cake frosting. But u only have a knife 0.25 inches wide. No flat edge. Now try and make a smooth cake with that. It's somehow impossible

@spitefirespartangaming Ай бұрын

Actually you are correct it does hate the primer thats why its bubbling it doesnt like smooth surfaces, try scuffing it with 120 before you apply it next time.

@FreyasFantasys Ай бұрын

Oh really? Well thank you! That's the mistery solved. It does not work over primer. Got it

@spitefirespartangaming Ай бұрын

ive never worked with that certain resin before but thats what happends when i put some resin over some types of primer, resin gets hot when it drys causing the primer to react and producing gas which gets trapped in bubbles, it can happin with paints to. Alot of times i have trouble when its a lacquer base paint or primer

@Wayatoon Ай бұрын

I've never had any luck leveling the bed with the vat inplace.

@UserGooduser Ай бұрын

How do you dispose of your old resin wash water? My gf is starting to do this was a hobby and she was wondering about how others did this

@rikkugamer182 Ай бұрын

Love ur voice

@thespicychico6799 Ай бұрын

Kinda looks like when fresh paint gets contaminated on a car and u get fish eyes

@FreyasFantasys Ай бұрын

Maybe. It's more that it's self smoothing, so it's contracting, but it's not viscous enough to hold it's surface tension. So it honey combs

@gorburrus Ай бұрын

Yor is never gonna get finished😭😭😭

@Jasbinnn Ай бұрын

Dude they just only started like the sanding down/epoxy stuff

@notatallfunctional Ай бұрын

What are the bube cubes for?

@samu_aalto Ай бұрын

have you heard about this new micron sls 3d printer? seems pretty interesting device, but the max part size is kind of limiting factor.

@FreyasFantasys Ай бұрын

Looks ... Small

@scorpio6587 Ай бұрын

Samus has a very nice backside.

@amalgamus5072 Ай бұрын

Be carefull about showing outside images of where you live/work, criminals are dangerous Your work is very cool :D

@Hado-fq8rm Ай бұрын

👍

@ihavekalashnikovyoudomath9275 Ай бұрын

If you ever get an Elgoo Jupiter, it's going to be a _game changer_ For better or for worse...

@FreyasFantasys Ай бұрын

There is a VERY BIG internal struggle in me. Cause right now, the printer size stops me from going to big. And that's a good limit. But if I get the bigger printer... What's stopping me? And then I'm just going bigger, and bigger! So it's kinda... Intentionally limiting myself to save me from myself

@Palmer.GV. Ай бұрын

👍👍👍👍👍

@heavensno487 Ай бұрын

Is that a Milwaukee Drill?

@cactusman8980 Ай бұрын

What about a stronger base then stronger supports???

@FreyasFantasys Ай бұрын

That leads to pock marks and damage to the figure. It will definitely lead to less failures, but clothes with a texture will suffer. 😮‍💨 it's a trade off