some great new chains and bars from beeray farms! New cylinders direct from hyway! they are awsome!!

[@tinmanssaws]

Great video Harv, I'm liking what I see in this video.

[@jjknowles7348]

The world is back to almost normal. Best day in a long time The Ironhorse is back . Great to see you Harv.

[@tinmanssaws]

Thanks!

[@martyrutter3630]

Blessings back to you sir. 🙏👋

[@ryanfriars545]

You’re awesome Tinman!

[@dpete8995]

Harv!… Glad to see ya gettin back up to full speed!

[@metsamikko]

Absolutely right,sharpening is everything. It doesn't matter how crazy saw you have if your chain is dull, it won't cut. Nice to see you feeling better and enjoying sawbuilding again.👍

[@davidquanchi5911]

Great to see you back King ! Respect from Aus 🇦🇺

[@dennisconstantine624]

Great to have you back young fella wishing you a full recovery, Cheers from NZ.

[@michaelfeliciano2834]

I like the new plan. Those of us that are younger pros need to learn our saws. Thanks for your shared wisdom.

[@martyrutter3630]

Continuing prayers for your complete recovery my friend. Your knowledge and experience is second to none. 👋♥️🙏

[@theironhorse6600]

I appreciate that

[@kipmyers5897]

Thank you ironhorse for the free knowledge you give us all....Glad you enjoy teaching us it keeps you active...Im 56 and stopped messing with my saws the past few years i became out of shape and it sure is hard to get active again.....never quit trust me on that!!!!

[@jakereape4095]

Picked up 4 now of your designed pipes off eBay. Best money I’ve ever spent. Nice knowing I have a piece of your knowledge on my saws

[@alanwatts9232]

Hi Harvey, I just found this video, it didn't come up like I thought it would so I had to go searching. Great to see you up and about, you're looking good.

[@samb4668]

Hey, ironhorse! I commented a couple of months ago saying I wanted to log. Well, after an arm and a leg payment later, I started my own business, which is excavation and land clearing.. basically my dream job.. thank you for giving me the courage and advice for logging.. You're definitely the best teacher I've ever had.. I most definitely learned more information from you in a couple of videos compared to 5 years in schooling! Glad you are doing well Harv. God bless brother

[@theironhorse6600]

That is awesome!

[@reddye2331]

Tht is cause u haven’t never came to the Old School of Hard Work get ur hands dirty tht I run. It’s a no nonsense program here Boiii!

[@denniseasly2527]

I would sure love to see all your videos from the beginning

[@timfoster7979]

Finally back. No more vacation for you. You were missed!

[@jeffkenyon7084]

Awesome you look like your feelings better which is great I love listening to your story's

[@itllkeal]

Thanks for sharing this Harvey. Keep it up

[@johnclarke6647]

I agree about sharpening. I hand file everything, unless the chain got rocked and I have to put it on my chain grinder to straighten out the sweep angles. Even then, I hand file them, afterwards.

[@markscott9426]

Ever since I got a husqvarna 372xp I’ve watch all your videos! Even before that I still watched them. But now I’ve seen a everyone! Thank you all your help, I also hope the best for your health and look forward to seeing more of your video, it nice watching someone you can trust!

[@ben-me9jy]

Great to hear glad you are feeling better

[@theironhorse6600]

Thank you!

[@bubbaray575]

Yowza, glad you're back. You look happier than a possum in a gum bush..... ...and you don't find anything much happier than that.

[@nicklambing9268]

I am extremely glad to see you looking so much better and hopefully headed toward a tremendous recovery. Best of luck going forward and am anticipating much more great content on this channel! Nick, North West Farmer (Oregon)

[@barryespeseth7355]

Great to see you again. Super glad you made it through your health issues. Truly enjoy your talks. It is like watching a grandfather talking/teaching his grandkids. Thanks again and welcome back!!!

[@beerayfarms7979]

Thanks for the kind words my friend. You always give us straight scoop on the products. That’s a nice looking jug of maple syrup on the stove behind you ;)

[@justinweaver8107]

Thank y'all 4 what uns do 4 harv.

[@justinweaver8107]

Whats the price range on 1 of those premium lite bars ? 28in 3/8 sthil 066mag?🙏😊💪

[@scottwilson4396]

Great to see you back in the saw shop with them sparkling eyes again Mr Drake !

[@theironhorse6600]

Thanks 👍

[@ted7x]

You've turned me on to tsumura bars a while back and I run them on all my saws now. You're right about opening up that oiler hole just a bit using your angle grind technique, definitely helps keep them running cooler, especially through those dead dry trees. What I noticed with tsumura bars is their sprocket bearings are super smooth compared to all the other bars I have and they have that sprocket oil hole too. With my tsumura bars cycling the chain by hand is almost effortless with almost no slop, archer bars loosen up kibd of quick. With my stihl bars noticed that they pinch easily and the bearings arent nearly as smooth, especially if you try not to leave too much slop in the chan. Thank you so much for sharing incredible amount of knowledge and experience, I have learned so much from watching your videos

[@jamespeterson327]

Great to see you with energy. I've had some experience.

[@waltervanhoose2557]

Glad to see you back here can't wait to see some saw stuff from you

[@robertdancho9671]

Very glad to see you back.

[@beerayfarms7979]

Guys. Sorry but the chain is still about 45 days out and Bars around 30, unfortunately circumstances out of our control… when we have them . We will let Harvey know and he can spread word. We are also gonna work on a smoker project with them too…

[@traynegrau8248]

Gotta tell ya Harvey ya look better than a month of sunny Sundays back in the saw shop!! And i bought one of thoes bars in a 28" at the Boonville show!! Damn nice running on a 462c!

[@TATE-d6z]

Looking good brother

[@timbarden4578]

Hi buddy..your looking good...lol...those bars were at booneville but I passed..I like the solid bars myself..I'm with you on the flex cant have much or they bind in the bore cut

[@theironhorse6600]

Hey Tim!

[@Beav7681]

Looking good Harvey, glad to see you back.

[@markjoudrey7036]

Can hear it in your voice.your back!!! Happy to see your feeling better and I look forward to watching .Take care Harvey.MJ

[@theironhorse6600]

Yes! Thank you!

[@adamsumner6379]

Good to see u out and about also those products look pretty dang good thank you Harvy thank u

[@Good.Fellers]

Hey long time watcher new commenter. Im putting a video cutting hardwood with that new tsumara in the morning.

[@theironhorse6600]

I'll check it out!

[@Good.Fellers]

@@theironhorse6600 awesome!!!!

[@justinweaver8107]

​@@Good.Fellersbeen watchn ironhorse several years now every vid.i recently subscribed to ur channel. Love it.❤

[@stormcrowe9820]

Glad to see you back Harvey!

[@ecook1501]

Good to see you Harv. Glad ur back.

[@paultheisen5290]

Paul from Iowa, So Glad to see you back Ironhorse, appreciate you

[@justinweaver8107]

Good 2 see ya sir i wana try 1 or 2 of them bars❤😊

[@butchhill2001]

good two see you Harv,

[@jayrobert5917]

Glad your back, glad your feeling better, my mom passed away last month, on this side of NY,

[@classicfordmuscle]

Great to have you back Harv.

[@307j.o.a.t9]

Lools like youre doin good buddy! Nice to see ya back in the saw shop! Lookin foreward to more videos!

[@bruceschaafsma7268]

Happy to see you back in the shop.

[@theironhorse6600]

Me too!

[@tommystates2175]

I'm glad to see you back I'm happy for you I'm glad you're feeling better

[@Grandpasrcbarn]

good to see you and hear that all is well

[@markheinl1902]

Glad to see you back

[@darellsunderlin4670]

Glad your feeling better , and im planning on putting a couple hyway kits in and i think they are just what i need. Hang in there !!

[@shoresharp8349]

A sharp chain is very important imo, it's like having a new set of tires vrs old tires. You can have a load of hp but if you can't get traction all the extra hp is just noise and maintenance.

[@alvinmcdonald390]

Greatttt to see the Ironhorse back...!!

[@Arfabiscuit]

Good on ya Harv

[@theironhorse6600]

You too!

[@welshwizard822]

great to see your ok harvey

[@TheHiddenBooger47]

Is there any way you can go into playlists and sort the different saws you big bore to have them together to watch ? It would be so much easier. God Bless and Love the channel !

[@darrenpierce9903]

Really glad to see you're back friend. You're looking so well. Looking forward to your pearls of wisdom. Love your channel From NZ

[@kurtsteele5587]

Good to see you.

[@theironhorse6600]

Hey there!

[@kurtsteele5587]

@@theironhorse6600 glad to see your felling better. Good to see you smiling

[@nicksanders9140]

Good n sharp less load on the saw add porting and exhaust gets you an animal that will run a longer bar and save time in the tree.

[@famasmaster2000]

You look like a million bucks Harvey. So nice to see you 😊 Love ya man

[@lehibell6176]

Glad your back !!!

[@cliffjenkins6419]

Thank goodness Iron horse is back . Really miss these instructive videos. Best of luck with your health friend.

[@alltherpm]

I got a dolmar 6400, i put a nwp big bore kit on it and been bullet proof,i haf a firewood bisness, i was cutting 300 cords a yr for 5 yrs, and now it needs a carb kit wont run right, not bad

[@bogan4859]

Good to see you Harvey. Your looking alot better ole timer👍

[@theironhorse6600]

Thanks 👍

[@wierd-al_3336]

Hi harv good to see you.

[@theironhorse6600]

Hey, thanks

[@wierd-al_3336]

​@theironhorse6600 I'm working on a 660. The chain wouldn't turn. So I took apart the sprocket housing from the clutch and found the roller bearing for the sprocket housing was missing half the rollers. I think they ran the saw until the clutched rubbed on the sprocket housing and wore down the clutch wouldn't contact the housing anymore. Would you notice that issue while the saw was running? Thank you

[@husaislander4838]

nice to see you again. hope your health is better

[@JimPalmgren]

Great to see you back on your channel

[@theironhorse6600]

Hey, thanks!

[@russclark1402]

hey hey old boy its great to see you in the saw shop i really would like to come over an see you when i do i will bring you a few saws you can fixs them up an sell them an put that money in your hands

[@closertothetruth9209]

man you seem alot better, so good.

[@JeffMOA]

I have been running the premium light 36” on my 272xp for the past year and a half. Absolutely love the bar and have had no complaints or problems.

[@TimothyGass]

Hey iron horse I have a customer wanting to send a saw to you to have it ported and polished and he wants sure how to get ahold of you.

[@ricwill1000]

Glad to see you back at it. You are my favorite saw guy, can’t wait for the next video

[@theironhorse6600]

Awesome! Thank you!

[@Husky87539]

Good to see you sir, glad your feeling better ol friend👍🏻

[@theironhorse6600]

Thank you kindly

[@mikecook2714]

Happy to see you doing well Harv !!!

[@kylecromp319]

You know what cylinder has that same lip? A ks flat top cylinder. Those pistons hyway that is are heavy as hell! You gotta do alot of grinding on it. Question. I have 2 red eye 066 stihls apart right now. One has a thin base ks cylinder the next was mahl thick based. Was that common?

[@jordenbook1276]

Glad to see you back buddy!

[@boatbeard7767]

Great to see and hear from you again mate. Might not always agree with everything but always more than one right way to get things done too, so that's my problem not yours. Cheers from Oz - those Hyway bits look way better than the stuff of a few short years ago. Keep reminding myself to get those crank seals into my old 61 and stop just moving the bits around the shed floor... Yep, the man cave is a real place of peace for many of us - sometimes productive, sometimes healing, always needed...

[@brandonyoumans2837]

Not sure where you are from but I grew up in Bradford and worked in woodhull for years. I'm still in NY .....hope all is well on your end.

[@jeffshannon4096]

Your looking good Harv

[@jcc3999]

Titanium pretty good on heat resistant and corrosive resistant

[@mulieholic]

We'll be watchin Harv!Keep up the great work and take care of yourself brother,best wishes from a fan and Vancouver Island logger!

[@boomupengineering]

I need to be learning some sharpening skills! Glad you're feeling better.

[@theironhorse6600]

You can do it!

[@earlbrown3470]

Hey Harv I'm looking for a good saw like a 044 or a 372 I'd love to have a ported 044 for firewood

[@TDB372]

He's back how you been old harv You ever do anything with that 621 jred I sent you a couple years back

[@peterburchell9241]

I hope you start feeling as though you are 16 again and sorry to hear about all the drama no one needs that at all .Your best at plain speaking .Keep up the good work .

[@jamesconn1104]

Thanks Iron Horse i enjoy Ya vids !! A man dont learn something here , theres something wrong , appreciate Ya Sir , Sorry to hear Ya been sick , hope Ya get better with time !!

[@theironhorse6600]

Thanks 👍

[@jamesconn1104]

YW Sir !!@@theironhorse6600

[@ToddAdams1234]

I’m not going to be able to financially help Harvey, but what I CAN do is comment to help you with the stupid algorithm so that this vid is more likely to get “pushed” out on to the mainstream chainsaw audience. Lookethere, I just did it just by talking about it 🎉

[@theironhorse6600]

I love it!

[@HayChaffandSawdust1]

Very nice, Sir!! More than one way to skin a cat!!

[@nicksanders9140]

Can you drill another hole on the bar so you can flip it?

[@waynetharp]

Mr.Nick...They come with an oil hole on both sides. It is just a matter of die grinding them slightly larger.👍

[@laurier3348]

I like sharping

[@monkamonk]

Oregon power match 😂 best bar none.

[@johnclarke6647]

I use nothing but RS chains. I cranked up my Stihl 024 the other day. It has its original bar that I refinished and when I goosed it up it slung a slug of bar oil all the way to the end of the workbench. Oil, also dripped down the complete length of the bar, like wax on a candle. I only have one Tsumura bar. It is on my MS 360. I got it in some sand a few years ago and it rippled the bar, because the steel is so soft. I am going to dress it down when I get the 360 out of the shop this fall but it chatters like a whore in church, now. It was an original Total bar that I picked up for its light weight. It was lighter than a Stihl bar but it did not hold up as well as I thought it would.

[@ryanfriars545]

You would have bent one of them Stihl light bars by flexing it like you did on your bench. Weakest light weight bar I’ve ever wasted money on. Love the tsumura bars. Can’t wait to get my hands on one of the new ones

[@funkysawmanwright5077]

The oregon lightweight bars that are no longer in production are far weaker than the stihl light bar. You need to get better sawing if you are screwing up stihl light bars. I'm a full time production timber feller, and only wear out a 28 or 32 inch stihl lightweight bar a year, usually the rail chips out. I burn over 5 gallons of saw gas a week to give you an idea

[@leemcdonough2633]

Hi, can you run the 28in premium light on a stilh 291?

[@nicksanders9140]

Missed you Harvey wanted to shoot over and help you out if I could while I was up in the Walton area. Even just stacking firewood and splitting for you. Just to lend a hand while I was there. Hope you are feeling better.

[@jonsalvehakedal2988]

The Power saw world love Y Harvey❤ Its a Christmas eve every time🎉😂

[@ludvigrognli9439]

Hello my good man. I have a recuest fore you. On topic in this video, but I try. I an from Norway, and I have good chaisaw, bought in 2006. It`s from 2006. A Husky 246. My cylinder is worn, but there is not possible to find a new cylinder to this saw. It is a littel special, with 30 mm stroke and 15500 rpm on the saw. What can I do to get a replasement cylinder. Can`t finde used one, because the saw is seldom to finde. Can you give me a tips? 50 cc saws are the usual cc here in Scandinavia because og the sise of trees.

[@theironhorse6600]

The 246 was the best made saw in the 50cc class! Very fast and reliable! Meteor and hyway both make a top end kit! I may be able to help you! Email me at [e-mail] I think I may have a good used cylinder!

[@jamieeason3870]

Hi buddy Jamie from newfoundland looking for a good 272xp cylinder and Pinson

[@johnclarke6647]

How are you doing, soldier? Hope you are doing better.

[@theironhorse6600]

Doing much better John! Just need to get my stamina back!

[@johnclarke6647]

@@theironhorse6600 Harv, I know all about that stamina - my get up and go done got up and went.

[@terrycalvert7812]

Want to talk about the dealers not taking care of there customers anymore I have a great one for you Harvey! I bought a new Ms 400 from my local stihl dealer paid them they did all the warranty for the saw then went to start it and it had no spark Yep no spark brand new saw! They fooled and fooled with it for about an hour mean while they had 3 other brand new saws on the shelf! They made me leave my new saw there while they ordered a new coil for it said a couple days max I could come pick it up! Couple days turned into 2 and a half weeks when they could have just gave me one of the other new saws that were setting right there on the shelf! Then when I went to pick it up after two and a half weeks I thought they’d give me a cpl chains or maybe a case for it for the aggravation hell even a hat shit no charged me full price for the saw didn’t give me anything off a chain a hat nothing at all! That was an experience I don’t ever want to go through ever again! Yeah the saw is great I have 4 other stihls never a problem like that before and the other 4 came from the same dealer but that will be my last purchase from them!

[@aaronjarvenpa1743]

Does beeray farms have a website

[@davidswaboda4609]

Wonderful your back, can learn a lot on this channel 😁