did I blow up my 90cc husky 365? let's take it apart to look at the carnage!

[@Finom1]

God Bless and Protect you IRONHORSE, for sharing your life and heartfelt words of wisdom to live by with us:)

[@jeremybuchanan4759]

Howdy, Harvey! Great to see you!

[@GlynnRussell-ew3pp]

Shout out to the Great Iron Horse. I built me the famous 372/ 272 piston epoxy case and intake I call my Iron Horse tribute saw to you my friend and let me say it is the most powerful 76cc saw I've ever ran ! Thanks for sharing your knowledge and expertise it's be very injoyable trying to duplicate these wonderful saws of yours !

[@scarred01]

Interesting build. My main concern would be if the transfers flow enough air for the extra cylinder capacity

[@FiddleMaker63]

Good seeing you Harvey. Thanks for bringing us along on the Iron horse learning experience.

[@tjgrant3124]

i like loctite 515 anerobic flange sealant. used on a sbc water pump with no gasket without any problem.

[@ozdatman]

Nice skills Harv. Good that you tink outside the box. Now, if I could fit a 372 cylinder on a 55 that would be perfect. haha

[@markmelton8919]

I was working on a 1952 David Bradley the other night that was seized. After soaking 1st in acetone/ auto transmission fluid for a day, then kerosene for a day I started tapping the cylinder off the piston . It moved about a 1/4" then snapped the ear off the cylinder base. This is the 1st engine i ever broke while trying to disassemble!

[@jasonthomas8770]

Glad you’re back Harv

[@rickfuerst2553]

Harvey, I'm glad you are back. I've missed your videos.

[@billyb.9878]

Welcome back. Glad to see your back at it. Love watching you build these Frankenstein saws. Wow, a 365 special that is 90 ccs. But as problems arise you deal w/them. Good job & thank you.

[@marko1025]

Great journey Harvey. Thanks so much for taking us along . That’s a deadly saw not for the faint of heart . The rewards will come , awesome content brother 🇦🇺✊🏻

[@jeffgrier8488]

Thanks for taking us along on the build Harvey, it's always great to be along for the ride!

[@ibbylancaster8981]

Mr Horse, you are the kind of guy that I could hang with and soak up as much knowledge as I possibly can. Much love from North Carolina 🤙. Prayers for your health to keep getting better.

[@dn0682]

Well done on the build, not many will take on this and also succeed. Cast iron needs more tolerance around the piston and I know this from a danarm chainsaw 125 with cylinder lining made of cast iron that seemed loose on cold but it runs great with loads of power. Well done and onwards and upwards.

[@martyrutter3630]

Yes sir you are back in the grove my friend. You may have had a failure but you have the skills to fix it no matter what the trouble is. 👍♥️

[@KensSmallEngineRepair]

A tapered pin held in place with the head of a screw would work.

[@kurtsteele5587]

Good save. Good thing you shut it down when you did.

[@DavidArentz]

Glad to see you back Harv. Watching from Australia

[@robsinclair1001]

Harvey great to have you back!

[@famasmaster2000]

Always a great day when IronHorse shows up !! What am awesome fix Harvey, excellent job 👍

[@scavuman]

You Are a Good Man Harv, God Bless, and Take Care.

[@1Buckluck]

Thanks for the videos from Arkansas brother!!!

[@backwoodslogging8443]

Good to see you mate! Hope you anf the family are well! Keep up the great work!

[@jjzap2935]

We learn what to do as well as sometimes what not to do.. either way certainly enjoy the process. Thanks for sharing !

[@siege78]

Hey Harv! I'm excited to see this bad boy in the wood! Thanks again for all your advice, I'll be hitting you up again soon.

[@traynegrau8248]

Just watchin the videos now Harvey good stuff period! It great to see you in the shop teachin school again! Have you have an opportunity to speak to the gentleman about my 394 and 371?

[@edwinladshow5791]

been enjoying this series! thank you uncle Harve! I have faith that it'll survive! have a wonderful day/night people peace

[@wierd-al_3336]

Thank you for sharing the experiment. I didn't think about the sleeve dropping. I was wondering about it potentially turning.

[@eriknelson6529]

What an awesome project, Harv! I love it. The saw is going to be a hit. Be good, my friend.

[@jjknowles7348]

Going to be a bad man of a saw. Missed your videos and soo glad to see you back. I looked everywhere for information on what's happening with you and if things are good. Keep 'em coming.

[@christalbott8446]

Sure is nice to hear your voice again! Thanks for your time an have a blessed holiday!

[@thomaspaine5091]

great to see you Harvey. thanks for all the info and videos.

[@HayChaffandSawdust1]

I think you're about to get all the gremlins looking for a new place to make their home; I think, with the pin, increased interference-fit, ring gap and extra 0.001" piston clearance, you've inoculated for gremlins!! Gardening running a little late here too; hay is ahead of time, but garden slow going.

[@carlcarlamos9055]

You haven’t posted in a few weeks, so I will put my question here. Hope you are OK. Have you ever used a platinum tip or iridium plug in any of your saws? I ask because you’re a dirt bike guy, and I think some old time dirt bike guys used to use the now discontinued Champion platinum tip plugs. The ones with a number and then the letter G. Anyway, hope you are doing well. Thanks and take care.

[@headless0ptomist198]

This is a really interesting build but I have 1 question, why are you using a winter air filter? At least that's what they're sold as where I live and every dealer carries 2 tpyes. The cloth tops are for winter to keep trap and moisture out of the carb, you carry one in your pocket and swap it when the one on your saw starts to freeze and let the other dry out in your pocket and the nylon ones are for summer and they come in both flat and high top.

[@victoryfirst2878]

This is why some saw makers use hard chrome plating on aluminum fined jug. Works better than a sleeve for sure I H.

[@JandSChainsaw]

I use motoseal always does good sometimes you will get a tube that's runny and you gotta squeeze around 9n the tube to mix it up

[@lanceevans688]

Good stuff. Have a great memorial weekend!

[@jameswilson322]

Harvy would you or your boy be interested in building a dirt bike enngine for me ? It's not for Me I'm built him one last year but the bottom let go ? I could build it again but I know you're engine's RRRRRIP .

[@stevetheriault4164]

DONT BE SORRY BUDDY YOUR HEALTH COMES FIRST ,,YOU LOOK HEALTHIER STAY SAFE BUDDY

[@1Buckluck]

26:13 maybe second before or later just before shut off was that sparks coming out of the cylinder or was i seeingthings???

[@michaelschlosky8721]

What do you think about a 372xp with 394 crank and cylinder modifying the case for larger bearings , I have a Machine shop in Connecticut

[@AkershusogstfoldTreservice]

So much good and interesting content. I have a question: Does it matter if you go up or down on the intake to get total duration? The piston doesn't interfere. Have a good weekend 😊

[@theironhorse6600]

It has to be the floor of the intake!

[@AkershusogstfoldTreservice]

@theironhorse6600 Thanks for answering 👍 and I have a follow-up question: I see that you make notches on both sides of the roof of the intake. Do you measure timing from the roof between the notches or from the notches. The notches seem to be the highest point of the intake. Thanks

[@johnclarke8180]

Awesome job, thanks for sharing!

[@maxumentaries]

hey IRONHORSE how much to port and muffler mod a ms311??

[@traynegrau8248]

Well you call it 🐎 let's have a firewood cuttin splittin weekend!😊

[@Keithskane]

G'day Harvey. I have a question do you no anyone that has a muffler for an 084? They seem to be very hard to find. Good to see your doing better👍

[@sawmanbigtreeslayer2360]

You will never find one. Have someone build you a pipe or something.

[@roostergamer2664]

Could a MS880 muffler be made to fit?

[@sawmanbigtreeslayer2360]

​@@roostergamer2664nope.

[@texasmcgyver]

What saw chain on a 100 ft roll do you recommend to buy and from who? I have been searching and get mixed reviews, i need 325,063. Any info or recommendation's would be appreciated.🇺🇸

[@robertsmith7580]

Awesome video Harvey

[@markhicks9545]

Good job good save but it don't sound quiet right it don't pick up hope it better with use

[@monkamonk]

Always be honest that's what we got and do the best with what we have.

[@docwy8763]

awesome your feeling good

[@jakegorman7121]

Also, I wonder if a roll pin would be better hold in heat differences?

[@jacobrude1957]

Haven’t watched in a while you look good mister

[@jakegorman7121]

What did you do to remedy the compression problem?

[@jakegorman7121]

I don't think drilling completely thru the cast was the way to go. Maybe partially would be better??

[@garengtutorial8923]

Halo bos. Konten-konten nya sangat menarik.banyak belajar dari konten anda. Apa cylinder 365 bisa pake cilinder tipe lain. Untuk meningkatkan tenaganya.

[@mikeburnet8245]

My favorite you tuber

[@scottwilson4396]

Can’t wait to see the super sleeper in the wood pile Mr Drake ❤👹👹💪🏿

[@brianbutcher8216]

Couldn’t you just green loctite the sleeve into the cylinder ???

[@ChuckGambler]

Long time no see

[@timbarden4578]

I give you credit..no one else trys such insanity..i ve found sanity is overrated..I'm having fun following along for the ride🙃🙃😆😆

[@theironhorse6600]

Hey Tim!

[@stoffes]

BLESSS YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@607genetics]

Nice job.. question. Can you weld a muffler on my gas bike engine? Keeps falling of bolts strip.. let me know I'm in the 607 hornell are ty sir

[@robertandreoli9764]

Hi Harvey two days in a row

[@michaelschlosky8721]

Made a ironhourse pipe got to show you !!!

[@travisweldmaster7815]

I put a screw through the tank, brand new tank on 029 039...wrong screw

[@fabzacres-blackcat]

Pin it or machine a ledge on the cylinder and tack weld it so it can’t move … before ya even fire it! You’re very fortunate you don’t have a 90cc paperweight 😂

[@naturundhund]

😎👌 Greetings from Germany Peter Husqvarna-Pit 😊

[@bryanmeier272xp8]

id be happy with the 86er

[@kevmcgoey8201]

Since when did chain saws blow up ? .

[@billupstateny9151]

🇺🇸🗽👌

[@Алекскоми-ы6я]

Продолжайте свой проект, будет интересно чем закончится

[@theironhorse6600]

I hope it ends well friend!

[@pm270100]

well

[@thetwostrokerebuilder]

Sleeve is so thin probably the issue