It's awesome watching you give life back to historical pieces like this.
@TheKinzlerBros9 ай бұрын
Thank you very much, we are glad you found us and thanks for the support!
@иринасергеева-к8д8 ай бұрын
Магазин такой: "Часть команды! Часть корабля!" 😂 Спасибо за прекрасную работу! Все ваши видео неизменно радуют.
@TheKinzlerBros8 ай бұрын
Thank you for the kind words and thanks for watching!
@jstaatzy5606 Жыл бұрын
Evaporust is the bomb! Amazing what 24 hours can do.
@TheKinzlerBros Жыл бұрын
Ya it works great, thanks for watching
@armorer94 Жыл бұрын
It works, but be prepared to re-blue everything.
@ZawHtetNaing-wt5ck Жыл бұрын
ပစ္စည်း မှာချင်တယ်
@oliverposselt160727 күн бұрын
I made my own evaporust. It works just as well, sometimes even a little faster than the original.
@Qigate Жыл бұрын
Wow, these restoration videos are such a Zen moment. It is so satisfying at a deep level to watch you begin and then complete each step... looking forward to the FN.
@TheKinzlerBros Жыл бұрын
Thank you we appreciate the kind words, thanks for watching!
@moosila5014 Жыл бұрын
p
@drone521 Жыл бұрын
Great video....just a tip, there were 2 different mags for these...commonly called old & new. One is 8 shot with square floor plate ( like your original) and the 9 shot like your new one. The difference is in the followers.....that's why your pistol no longer has a last shot hold open and when you remove empty mag the slide stays open. When you then insert another mag ( loaded or unloaded) the slide will close when the mag is fully inserted. If the mag is loaded, it will of course chamber a round no slide racking or slide release required. Makes for fast reloads....it's really a good system. Mauser actually had a prototype in 9x19mm...but military chose the luger there is also a 1917 .32acp that is mechanically identical th the 1910 , just larger. Thanks again .
@TheKinzlerBros Жыл бұрын
Thanks we appreciate it, I didn't know that but, on this one the top of the mag release broke, which holds open the slide when empty. Even without a clip it wouldn't stay open. Thanks for watching
@Daily_Knowledge2k24Ай бұрын
I watched most of your videos. The best part of all of the videos is “Test Fire”🔥
@TheKinzlerBrosАй бұрын
Thanks we appreciate it, that's the best part for us too. Thanks for watching!
@TheIndianalain Жыл бұрын
Thank you for this video. What amazes me most (apart for your skills!) is the incredible ingenuity of those designers at Mauser. Apart for the hand guards, not a single screw involved! As a Belgian, I can't wait for the FN ;-)
@TheKinzlerBros Жыл бұрын
Your welcome, thank you very much for watching! Ya the designs are amazing, ya we are too. Thanks again
@zonaken Жыл бұрын
I'm always amazed at how you can bring rusty old relics back to life. And absolutely astounded how you can get rounds to travel down that nasty barrel and actually hit something! Another great job. Zk
@TheKinzlerBros Жыл бұрын
Thank you very much for the kind words and support! Thanks for watching!
@bluescatreimer Жыл бұрын
Another great job guys! A well made pistol for it to function properly after all these decades and the condition it was in. Looking forward to your next video!
@TheKinzlerBros Жыл бұрын
Thanks we appreciate it, absolutely it is! Thanks for the support and for watching!
@bluescatreimer Жыл бұрын
@@TheKinzlerBros Your welcome!
@Andrew-sv6zq Жыл бұрын
You guys get the neatest guns and do such great restorations. Always cool stuff to add to your collection.
@TheKinzlerBros Жыл бұрын
We try our best, thanks for watching we appreciate you!
@j..9219 Жыл бұрын
@@TheKinzlerBroshey nice job have you tried to plate with gold or platinum instead to turning it black
@rp8133 Жыл бұрын
I like that you brought this nice little beauty to life again. Thanks.
@TheKinzlerBros Жыл бұрын
We were happy to do it, thanks for watching we appreciate it!
@amack1996 Жыл бұрын
Awesome job! Great addition to the brought back from the dead collection!
@TheKinzlerBros Жыл бұрын
Thanks, haha right! It is for sure. Thanks for watching!
@martinmarsola6477 Жыл бұрын
A great video as always. Great to see you again, Brandon. I missed a few of your videos, as to I’m in a nursing home suffering with ALS. But gazing at your videos really are tremendous. Hello to Austin for me. See you on the next! ❤❤😊😊
@TheKinzlerBros Жыл бұрын
Thanks Martin, this has always been Austin on the comments! We appreciate you so much buddy and we hope it gets a little easier, thanks for watching!
@EduardComan Жыл бұрын
Thumbs up and thanks for adding the metric values as well!
@TheKinzlerBros Жыл бұрын
Thanks and no problem! Thanks for watching!
@MarkSproson6 ай бұрын
It’s great that you bring back to life fantastic machines and let them do as they were made for
@TheKinzlerBros6 ай бұрын
Ya I really enjoy it and they deserve it! Thanks for watching
@squirrelsmagnetfishingoutdoors Жыл бұрын
Hi guys that was a good clean up on this small pistol and you got it in good condition to make it shooting again awesome video guys can’t wait until the next one you clean up
@TheKinzlerBros Жыл бұрын
Thank you very much, we appreciate it! Thanks for watching
@69Willis350 Жыл бұрын
I love watching restoration videos
@TheKinzlerBros Жыл бұрын
We appreciate you watching our videos!
@johnfisher71436 ай бұрын
Putting on that new grip transformed the gun. Nice group too.
@TheKinzlerBros6 ай бұрын
Ya for sure, thanks!
@spooderdoggy Жыл бұрын
Hey, nice work on that nice little gun. So glad it turned out so well. Congrats!💪🏻🇺🇸
@TheKinzlerBros Жыл бұрын
Thank you very much we appreciate it, thanks for watching !
@charleshamilton5356 ай бұрын
These videos are fascinating. Lovved the "73 Winchester. Can't get enough
@TheKinzlerBros6 ай бұрын
Thank you very much we appreciate the kind words and thanks for watching!
@raydavies52493 ай бұрын
So cool..... love the detail !!! Thanks !!!
@TheKinzlerBros3 ай бұрын
Glad you like it! Thanks and thanks for watching!
@max.m.8873 Жыл бұрын
Great work! A very nice little pistol, congratulations on your addition to the collection. I'm looking forward to the new project 👍👏💪
@TheKinzlerBros Жыл бұрын
Thanks Max, ya I really like it! Thanks for watching
@kevinbovin785611 ай бұрын
I was drawn in like a moth to a light..great job was surprised to see you struggle with the magazine . Great restoration again.
@TheKinzlerBros11 ай бұрын
Thank you very much we appreciate it, ya it was difficult. Thanks for watching!
@irafowlerjr.74926 ай бұрын
I would have never got that gun apart or back together. Fantastic job.❤
@TheKinzlerBros6 ай бұрын
Ya it's tough, thank you and thanks for watching!
@ludwigderzanker9767 Жыл бұрын
Yessir, you can shot I said it before! Yes,it's a Mauser but a little ugly too, and I m a german Mauser fan...Marvellous work bros ,your'e awesome! From Northern Germany Ludwig.🎉
@TheKinzlerBros Жыл бұрын
Ya its not a beautiful gun, thanks Ludwig we appreciate it! Thanks for watching
@ВладимирКукалев-ж5с Жыл бұрын
С УДОВОЛЬСТВИЕМ СМОТРЮ ВАШУ РАБОТУ , ПЛЮС ТЕСТ НА СТРЕЛЬБУ, ЭТИМ ВЫ ПОКАЗЫВАЕТЕ ВОЗМОЖНОСТИ СТАРОГО ОРУЖИЯ, В ОТЛИЧИЕ ОТ ОСТАЛЬНЫХ ХАЛТУРЩИКОВ ,КОТОРЫЕ НАВОДЯТ ЛИШЬ ВНЕШНИЙ ЛОСК! , ДЛЯ МЕНЯ ВАШ КАНАЛ ЛУЧШИЙ ПО ДИНАМИКЕ И РЕЗУЛЬТАТУ! .
@TheKinzlerBros Жыл бұрын
Thank you very much for the kind words, we appreciate your support ! Thanks for watching
@georgeclontd4984 Жыл бұрын
Hello again boys. Looks a little rough but shoots nice 8/10. Keep doin what ya do. Much respect.
@TheKinzlerBros Жыл бұрын
Thanks George, ya a little! Will do, thanks for watching
@sebetletirsportif5717 Жыл бұрын
Beautiful little gun....à piece of history....your gunsmisth job is really incredible....so happy to see your vidéo....thanks ❤
@TheKinzlerBros Жыл бұрын
Thank you very much we appreciate the kind words, thanks for watching!
@MASI_forging Жыл бұрын
Another great restoration 👍👍
@TheKinzlerBros Жыл бұрын
Thank you very much!
@condar419 Жыл бұрын
Very nice restoration! I'm always surprised when it's so easy to get 'new' parts for a 100-year-old gun.
@TheKinzlerBros Жыл бұрын
Thanks, its not always easy! Thanks for watching
@poowg2657 Жыл бұрын
It usually means another gun had to die so another could live. Just the way it is.
@Bacardibatman Жыл бұрын
Another good restoration, didnt think the rifling was gonna be anywhere near that good. Look forward to the next one 👍
@TheKinzlerBros Жыл бұрын
Thanks, ya me neither. Thanks for watching!
@MegaCAMARLENGO5 ай бұрын
It's an excelent restauration. Good job!
@TheKinzlerBros5 ай бұрын
Thank you very much!
@davidhandyman7571 Жыл бұрын
Your skill and knowledge always impresses me. Thank you for sharing.
@TheKinzlerBros Жыл бұрын
Thank David we appreciate it, thanks for watching!
@johnbennett72443 ай бұрын
Nice gun. Good video.
@TheKinzlerBros3 ай бұрын
Ya it's cool, thanks we appreciate it!
@H0YII Жыл бұрын
These videos are great! What do you do with these once you restore them or are these jobs people as you to do? Also what does the WD-40 bath do?
@TheKinzlerBros Жыл бұрын
Thanks we appreciate it, when they are customers we ship them back. When it's something we have bought, we keep it! The bath helps cure the hot bluing solution, thanks for watching!
@asenfilipov1872 Жыл бұрын
Thanks for the video, I was interested to see how this relatively little known model was disassembled. I would never shoot a barrel that worn, it's a gamble.
@TheKinzlerBros Жыл бұрын
Thank you and we are glad to hear your interested in it. Yes it is a gamble but, we test fired it and it was good. Thanks for watching!
@ibanez7412 Жыл бұрын
Soooooo many parts....it is a puzzle Good job!
@TheKinzlerBros Жыл бұрын
Absolutely, thank you very much! Thanks for watching
@paulricelli5520 Жыл бұрын
🟥 Great resto. Curious why you hot blue versus cold blue. I could see hot blue when the final product would be less pitted and more pristine. It's a thin line between patina and placenta.
@TheKinzlerBros Жыл бұрын
Thanks, cold bluing isnt as dark and doesn't hold up as good! Thanks for watching!
@shintokatana17 Жыл бұрын
amazing restoration
@TheKinzlerBros Жыл бұрын
Thanks we appreciate it!
@donfrentzel2739 Жыл бұрын
Good video. I have one just like it. Better shape. Believe grandfather kept it in his butcher shop. Shoots good with fail to eject sometimes. Quality weapon.
@TheKinzlerBros Жыл бұрын
Thanks, very cool! Ya this was does sometimes to. Thanks for watching
@larrykelly2838 Жыл бұрын
Nice restoration. Nice gun.
@TheKinzlerBros Жыл бұрын
Thank you very much we appreciate it!
@josephadamkovich1887 Жыл бұрын
Excellent as always .Brandon
@TheKinzlerBros Жыл бұрын
Thank you very much Joseph! Thanks for watching
@hondahowto9 ай бұрын
Can't wait to see the Walther!
@TheKinzlerBros9 ай бұрын
You don't have to wait, it's on the channel! Thanks for watching
@hondahowto9 ай бұрын
@@TheKinzlerBros my bad, I thought you were doing another one! I might have a gun for you guys to restore. When I get enough time I will figure out how to contact you guys
@abinalex3173 Жыл бұрын
Good restoration ✌✌👏
@TheKinzlerBros Жыл бұрын
Thanks buddy!
@ember5837 Жыл бұрын
Nice restoration guy's.
@TheKinzlerBros Жыл бұрын
Thank you very much!
@mattellis4794 Жыл бұрын
one of the few real restoration channels...so many fake ones out there. thanks for the good content.
@TheKinzlerBros Жыл бұрын
Thank you very much, yes there is! Thanks for watching!
@5.56Media Жыл бұрын
Excellent job!
@TheKinzlerBros Жыл бұрын
Thank you very much!
@stevenstrempke8883 Жыл бұрын
Nicely done!
@TheKinzlerBros Жыл бұрын
Thanks!
@joycechenette5184 Жыл бұрын
Awesome Job 👏👏
@TheKinzlerBros Жыл бұрын
Thanks we appreciate it!
@petegibson863 Жыл бұрын
Magnificent restoration Brandon , job satisfaction is everything , you must sleep well at night ! As always , very fine marksmanship , love your work .
@TheKinzlerBros Жыл бұрын
Thanks Pete, yes it is! We appreciate the kind words and thanks for watching!
@PaulFalder-g7b Жыл бұрын
A better job than some of the butchers one sees on KZbin who use hammers rather than oil to release parts
@TheKinzlerBros Жыл бұрын
Ya there are some that are really rough on them!
@chacal-le-vener Жыл бұрын
Best ASMR ever seen. Thx ! you rock dude👍
@TheKinzlerBros Жыл бұрын
Thanks we appreciate it, thanks for watching!
@JohnnySwedishScrapper Жыл бұрын
another awesome restore ;) great video
@TheKinzlerBros Жыл бұрын
Thanks Johnny we appreciate it!
@terrytytula Жыл бұрын
A friend of mine uses a solvent in a ultrasonic cleaner to free up rusted component's. Works real well.
@TheKinzlerBros Жыл бұрын
Ya we plan on getting one, thanks for watching
@hooks_and_horns Жыл бұрын
Good video! My uncle has one identical, he used to concealed carry it, for some reason 😂
@gablor452 Жыл бұрын
Based uncle
@TheKinzlerBros Жыл бұрын
Thanks we appreciate it, ya they are handy to conceal carry!
@eduardotrillaud696 Жыл бұрын
Reasons, probably. Small, light, discreet, cheap ammo, easy to use, not so loudy I guess... Yes, some might argue the .25 is an anemic cartridge, but getting shot 3 or 4 times is not nice, whatever the caliber. In such short distances and even more if it's aimed to the face, even a mouse gun can give anyone a bad day. And it does comply with the rules of engagement, considering the reason to use a gun is to cease your attacker's intentions, whether by killing or seriously wounding him, or just scaring the shit outta him and alerting the neighbors.
@thomasmacdonough77634 ай бұрын
Stubbled onto your channel love it! Just subscribed! I can watch this stuff all day!!
@TheKinzlerBros4 ай бұрын
Glad you found us, we appreciate the support!
@minstrelgelotte Жыл бұрын
At what temperature do you do the bluing bath? Very good job, I am also a gunsmith, but I am starting with restorations and repairs to my weapons.
@TheKinzlerBros Жыл бұрын
At around 250, thanks and good luck with your projects! Thanks for watching
@andreibirgoanu19899 ай бұрын
Just found one of this today with metal detector in the woods.. It is in really bad conditions.. But is still in one pice! I will try to do someting with him... Thank you!
@TheKinzlerBros9 ай бұрын
Awesome, good luck to you! Thanks for watching!
@cosmo9882 Жыл бұрын
Sorted, looking forward to the next one, 😎👍
@TheKinzlerBros Жыл бұрын
Thanks Cosmo, thanks for watching!
@BladeShowMan Жыл бұрын
i love the sound of this gun
@TheKinzlerBros Жыл бұрын
Thanks Tim, me too! Thanks for watching
@HopliteWarlord Жыл бұрын
Great little pistol.
@TheKinzlerBros Жыл бұрын
Thanks!
@trevorsocia2300 Жыл бұрын
Do you ever polish them to make them super pretty again? Or do you just clean and such to make them shooters?
@TheKinzlerBros Жыл бұрын
I do polish sometimes but, it takes away the markings sometimes! Thanks for watching
@DiegoHernandez-ip9hk Жыл бұрын
Heck yes now you have done two .25 caliber guns. One is American and one is German. 👍👍 I like the variety also love that you include the year of production and you actually restore legit old guns not guns that are 20 years old.
@TheKinzlerBros Жыл бұрын
Thanks Diego we appreciate it, thanks for the kind words and for watching!
@cmb420. Жыл бұрын
My favourite KZbin video at the moment
@TheKinzlerBros Жыл бұрын
Thank you we appreciate it!
@ВикторНечипорук-ш8л Жыл бұрын
Респект за работу👍👍👍
@TheKinzlerBros Жыл бұрын
Thanks we appreciate it, thanks for watching
@milospopovic697828 күн бұрын
Well done
@TheKinzlerBros28 күн бұрын
Thanks
@mikedavis38415 ай бұрын
Cool video. 👍
@TheKinzlerBros5 ай бұрын
Thanks!
@JamesAlsup-e7b Жыл бұрын
Excellent!
@TheKinzlerBros Жыл бұрын
Thanks!
@koopsjunta Жыл бұрын
Great work, mate. Love your vids. Love the art of it. ✊🏻
@TheKinzlerBros Жыл бұрын
Thank you very much we appreciate the kind words!
@JeffY-y3z6 ай бұрын
thanks for sharing I always love your videos. You never disappoint, always entertaining and the results are consistently great.
@TheKinzlerBros6 ай бұрын
Thank you very much for the kind words and thanks for watching!
@teran2211 Жыл бұрын
Отличная работа бро как и всегда ☺
@TheKinzlerBros Жыл бұрын
Thank you very much, we appreciate it!
@donparker1823 Жыл бұрын
This was the first gun I ever shot about 60 years ago. Dad had a nickle plated one. I hoped to inherit it but he gave it to my uncle who's house got robbed a couple of months later and he lost it. Along with a model 1894 Winchester lever action with an octagon barrel that I also very much wanted.
@TheKinzlerBros Жыл бұрын
Thats cool but, you not getting it and it getting stolen really sucks! Thanks for watching
@danielliguori83244 ай бұрын
Have you ever tried a blow torch? I know the heat may be able to loosen parts up
@TheKinzlerBros4 ай бұрын
Yes I have, it doesn't work too great. Thanks for watching
@holymoly6829 Жыл бұрын
I’m always amazed at your work Also at the fact these weapons are still functioning as well as they do 👍
@TheKinzlerBros Жыл бұрын
Thank you very much we appreciate it, sometimes I surprise myself. Thanks for watching
@jannovak1311 Жыл бұрын
Nice job.
@TheKinzlerBros Жыл бұрын
Thanks!
@tiredlawdog Жыл бұрын
At the end of this totally successful video, I'm left wondering what this operation cost. I have the pocket pistol in the 32 caliber. Haven't fired it in ages. Thanks for the great video.
@TheKinzlerBros Жыл бұрын
Enough that is for sure. Very vool! Thanks for watching
@diggerdave51 Жыл бұрын
Great Job !!!!
@TheKinzlerBros Жыл бұрын
Thanks we appreciate it!
@davidwylie5921 Жыл бұрын
I miss you magnet fishing videos
@TheKinzlerBros Жыл бұрын
Ya it was fun, thanks for watching our restorations!
@marat3759 ай бұрын
Видео, огонь👍👍👍
@TheKinzlerBros9 ай бұрын
Thank you very much, we appreciate it!
@Inkybel4 ай бұрын
Where do you find guns for restoration? Been wanting to get into this type of stuff, already started with bayonets. But yeah where would you recommend looking?
Do you use schematics to take apart & reassemble?.. & if so.. where do you get them from
@TheKinzlerBros5 ай бұрын
Sometimes, google.com. thanks for watching!
@supervivet911 Жыл бұрын
Great vid as always! Keep it up!
@TheKinzlerBros Жыл бұрын
Thanks! Will do!
@marciodossantosmanganelli2542 Жыл бұрын
Outra restauração excelente! ☺️👍⭐⭐⭐⭐⭐
@TheKinzlerBros Жыл бұрын
Thanks Marcio!
@MikenShadow Жыл бұрын
Can't wait for the FN!!
@TheKinzlerBros Жыл бұрын
Me too, thanks for watching!
@MeshFrequency Жыл бұрын
Nice to see hot blueing. I dont see it often being used.
@TheKinzlerBros Жыл бұрын
Ya we haven't been using it too long but, we like it! Thanks for watching
@gdevelek9 ай бұрын
So much metal has been lost in the form of rust, and yet these guns can still function...
@TheKinzlerBros9 ай бұрын
Ya they are built well! Thanks for watching
@michaelvolovik45169 ай бұрын
чем замысловатее, сложнее, тем лучше? Прекрасная альтернатива этим штучкам кольт 1911 года, до сих пор в пользовании US Army; и с которого сделаны и делаются и сейчас клоны в десятках стран. Русский ТТ включительно.
@TheKinzlerBros9 ай бұрын
Yeah some were a little too much, ya you can't go wrong with Colt! Thanks for watching
@grayharker6271 Жыл бұрын
Try taking a piece of glass and wet dry fine grit then wet polish the flat surfaces of the frame and slide. 1500 will make the engraving pop.
@TheKinzlerBros Жыл бұрын
Thanks for the advice, we appreciate it! Thanks for watching
@FrFr224 Жыл бұрын
With hot blueing are you able to do a high polish or no also thanks for the hot blue tutorial
@TheKinzlerBros Жыл бұрын
Your welcome, you have to polish the metal and make it smooth before hot bluing to get that finish. Thanks for watching!
@erfan_st8 ай бұрын
Is it possible to fix that partial crack and restore the pistol to shoot again?! 🤔 The appearance of the pistol is completely clean and without scratches, the only problem is at the end of the barrel.
@TheKinzlerBros8 ай бұрын
You will need to buy a different barrel for it, thanks for watching!
@lannyfloyd61318 ай бұрын
Does the rust remover also remove the bluing?
@TheKinzlerBros8 ай бұрын
Ya for the most part, thanks for watching!
@aidanmenez9624 Жыл бұрын
Yesss back again
@TheKinzlerBros Жыл бұрын
Absolutely, thanks for watching
@wraithmaker30818 ай бұрын
I need some information. In your process you do not show the removal of the extractor or reinstalling it. It is simply missing during cleaning, and then in place when finished. I need to see how you removed it and how you reinstalled it please. Thank you.
@TheKinzlerBros8 ай бұрын
I don't have that footage sorry, there are other videos out there. Thanks for watching
@pablomarcelocastro685211 ай бұрын
Impecable.
@TheKinzlerBros11 ай бұрын
Thank you very much!
@grahamparr39337 ай бұрын
How far away was the target, looked very close, not really a man stopper though is it, I think it would take the whole mag.
@TheKinzlerBros7 ай бұрын
Idk probably 30 to 40 feet, thanks for watching!
@76629online5 ай бұрын
Why do you hot blue some of the guns you restore and cold blue some others? What's the difference?
@TheKinzlerBros5 ай бұрын
Early on I cold blued because it was cheaper and easier but, now we are set up to hot blue and it gives the gun a much more consistent and better look. Good question and thanks for watching!
@LasseD4L Жыл бұрын
My apologies if this question is ignorant. Why did you not try heating the gun handle?
@TheKinzlerBros Жыл бұрын
I tried everything else, so I didn't think it would matter. Thanks for watching
@СергейКузубов-н2о Жыл бұрын
Спасибо за ролик очень интересно и подробно то что в конце Вы показываете работу что он работает стреляет
@TheKinzlerBros Жыл бұрын
Thank you for watching, ya we always shoot them when we can! Thanks for watching