Works Like Magic! Pour Super Glue on Thread and Be Amazed

In this video, we did a lot of repairs using super glue and cotton thread. Super glue is a very suitable material for repairing small plastic tools. Most people know how to fix using super glue and baking soda, but not many people know how to fix with cotton or cotton thread and super glue. By applying the methods in this video, you can learn an additional repair method to the super glue and baking soda repair method.

[@maxmustermann3777]

Thank you so much for NOT using some of these annoying music. It is a pleasure to hear only the sound of the tools. Thanks a lot for that! The content is not so bad either ;)

[@johngoodin3445]

My mom and myself did the same thing when the add a beed craze was all the rage in the mid 80s. You would purchase beeds and make your own customized jewelry. Only pushing that razor thin cord thru the beeds was one hazzle. I would put down a plastic grocery bag down on a table and drip a couple of drops of superglue on it and roll the end of cord in it. The end of the cord was stiffened enough to easily run through the beeds. Did you know you couldn’t glue a plastic grocery bag to itself. Just wrap some around your fingers and you’ll never glue your fingers to themselves. Did you know superglue was originally a surgical glue invented in the mid 50s?

[@marsbase3729]

Good tips. It's amazing how useful this stuff is

[@frogsoda]

Yep, that's why a glues fingers together better than anything else!

[@johngoodin3445]

A couple of points that I forgot about. After you dipped the cord into the super glue and got it nice and stiff was to cut the very end off at an angle. Made it really easy to push through the beads. Also when knotting the ends off so they couldn’t be pulled through the clasps on the ends put just as big of a knot as you could fit into the clasps so they couldn’t be pulled through. Pull the knot out and roll the knot In super glue and shove it back into the clasp as tightly as you could. You’re super gluing the knot to itself and the inside of the clasp. Hell would have to freeze over first before that clasp would ever come free.

[@pelopidassofokleous8967]

Exeleñd

[@janettfarrell1143]

They used glue to close me in when I had my knees replace this year.

[@jamesward5721]

You should do a video on fiberglass resin - the stuff they sell cheap for fixing holes in cars - if you mix it with sawdust, or metalfilings, or colourants or stone dust etc etc etc - it makes for a material that has 1001 uses when repairing stuff. It's like superglue, but you get loads so You can fix loads & fill big holes. Mix some with sawdust from the wood you want to repair - bang, you have the best wood-filler you ever came across - as an example.

[@jerichojoe307]

Yeah it would work great. Bondo has many uses but not very cost-effective cuz it's not cheap. Just buy a freaking dowel rod and cut it down and fix wood with wood like normal people do. A 4-ft dowel rod costs like a dollar 🤷 I'm all for DIYs and quick fixes, but only when they're cost-effective. And Bondo and super glue are not cheap so I'll stick to my dowels 🤷

[@kellycoleman715]

Super glue works great on everything except what it is intended for.

[@ThePrufessa]

What is it intended for?

[@yuryschkatula9026]

@@ThePrufessa not for water :) it dissolves it slowly

[@ThePrufessa]

@@yuryschkatula9026 what the fk are you talking about?

[@ThePrufessa]

I thought super glue was *_"intended"_* to fix things. So what do you mean it works on everything except what it's intended for?

[@yuryschkatula9026]

@@ThePrufessa some plastics (like LEGO one) can not be fixed by Superglue. And some environments (like water) are not friendly for that glue as well.

[@DIYTechTrends]

Amazing ! the person who invented super glue is a genius, now I can solder anything, thanks ❤🎉🎉

[@vainwretch]

I liked the pipe repair by dropping in a piece of pipe inside of the opening. The only thing i would do differently would be to use the correct pvc cement on the inside and epoxy on the outside. This would be a good repair for cast iron . Cut a piece of plastic for inside and clean the inside of the iron pipe really well , sand paper and TSP . Then use plumbers epoxy to hold in place. Probably wouldn't work well on pressure but for drain pipe or a vent stack. I can think of a few other extras to add to it for a more permanent repair . Or even epoxy the plastic pipe to the outside with a couple of hose clamps around your repair. If you have the stuff laying around anyway .

[@user-ik4br3nk2w]

or use a .99 cent coupling 🤭

[@user-heieodors]

О нет ремонтировать трубу для воды суперклеем бесполезно ! БЕСПОЛЕЗНО ! Сцперклей боится воды и все равно отслоится ! Что же до пропитки шнура суперклеем ... Ну надо было и я пробовал такое ... В общем крепко получается но ... Но на много слабее чем с эпоксидной смолой ! На много слабее ! Так что сильно надеяться на композит с суперклеем не стоит !

[@user-ix6wp5hz7i]

Спасибо. Поучительно. Возьму на заметку.

[@user-tf3wi5no3j]

Если постоянно пользоваться супер клеем . тем более в таких количествах . реальный способ остаться без штанов.

[@ShirleeKnott]

omw ty! downsized from a turn of the century triple brick to a brand new pre manufactured home and nothing has worked to keep the curtain rods up. going to try this with new set of plugs.

[@user-ox9yb1qr6l]

Я Оху.. Пардон, я обалдеваю, что этот клей "животворящий" делает!!! Чудеса!!! Он способен " Впихнуть невпихуемое"!!! Дальше- больше! Год назад я таким манером отремонтировал замок дверки стиральной машины, который просто рассыпался. Найти- купить новый не удалось. По " косточкам" собирал, как хирург. И СКЛЕИЛ!!! Держится- ВО!!! Теперь- ничего не боюсь!

[@elizabethmarrero5887]

Como hacer el superpegamento con bicarbonato. Excelente su video. gracias.

[@georggeiersdorf1077]

Примеры хорошие, кроме первого. Лучше взять калиброванное сверло и потом не морочиться с суперклеем.

[@CrisTina-tp2jg]

At the beginning of your clip you glued the rope, what is the significance of this? What is the use for the glued rope?

[@aaronisaacs3765]

What was the significance of Any of this. This guys house has to be held together with toothpicks and superglue

[@joxterthemighty]

Cotton also works very well for this, pull some tufts from a cotton ball and twist

[@geemac7267]

Dude!

[@Ehbs0907]

Muito bom, agradeço pelas dicas

[@zmaxx21]

Super glue, the answer to and the source of all our problems.

[@wirasantosa4924]

the power of super glue, great idea

[@T1M6]

Matchsticks or any sliver of wood - useful when the screw hole is too large.

[@johnknight375]

I always keep a good supply of toothpicks in my workshop for just this reason. Slide them in the oversized hole, snap off at the surface, and there you go ...

[@rotten-Z]

В мене зломався штекер живлення від ноутбука. Відірвався дріт від контакта. Після ремонту я замість корпуса роз'єма намотав нитку і клєм просякнув її. Тримає добре

[@bradmaas6875]

You can also use paper towels as reinforcement, like doing a fiber glass repair. Hogged out screw holes in wood, I prefer wood glue and matchsticks.

[@almotik8514]

Зачем нить если есть вата, сода, дресесные и пластиковые опилки? Даже кварцевый песок подойдёт, а возможно и цемент.

[@Viktor_Pertsovich]

Кварцевым песком ремонтировать отверстие в дереве это конечно очень умно, от чего не забить мраморный чёпик в дерево, так ведь прочнее и проще, чем взять верёвку )))

[@theyoungupstarts1243]

Cool tips, especially the bong repair!

[@flamingfrancis]

Bong repair? Shoulld be concerned with the effects of toxic contents of supeglue on the toxic chemicals in dope. Who knows the long term effects?

[@theyoungupstarts1243]

All joking aside, you are correct on both points.

[@user-heieodors]

Диэтилцианакрил боится воды ! Такие вещи лучше делать с помощью ПВА !

[@Pon-o6h]

selalu ada saja ide-idenya....

[@user-heieodors]

Даже не думайте ремонтировать трубы суперклеем ! Вода все равно отслоит суперклей !

[@Aristarx0581]

Этот супер клей дороже 1 метра новой трубы, привет идиотам.

[@nicfarrow]

Wow! A rare video of hacks that look like they will actually work!

[@vvvvvv8007]

Nada nuevo que otros no publicarán antes. Algunas opciones son caras como reparar el tubo, porque es más sensato usar un pegamento de PVC que cianocrilato, debido a qué el pegamento de PVC fusiona los materiales entré sí, lo qué no pasa con su solución. Si realmente fuera una opción se instalarian las tuberías con cianocrilato, pero no es así. Lo sustitución de los taquetes tampoco es una idea nueva, se venden los taquetes de fibra, ya un poco difíciles de conseguir, pero aun los venden, y se han descontinuado porqué no tienen un factor de anclaje bueno, terminan por ceder. Aquí las pruebas qué les hacé para justificar que sirven, realmente muestran qué son "mañosas", porque son son "caricias". Que sirve, pues sí... Pero qué sea una opción de uso preferente, no. Y lo digo por experiencia, en ningún casó son una solución de verdad. Esté material tiende a ser útil para unir, no es un material para rellenar. El éxito de usarlo con bicarbonato es debido a qué los espacios entré granos son minimos y contienen humedad, lo que cumple con las condiciones que hacen al cianocrilato eficiente. Pero hasta ahí. Normalmente quiénes lo hemos usado, vemos qué tiende a fallar cuándo se somete a esfuerzos mecánicos, porque su adherencia es química, tiende a granularse ante los esfuerzos. Lo que no pasa con adhesivos específicos como los epóxicos que adhieren acero, o los acrílicos qué pegan mármol, hasta el pegamento para madera es mas eficiente en las uniones. Los asiáticos han usado de forma abusiva al cianocrilato en la fabricación de muebles por su velocidad en la fijación, por desgracia la madera tiende a absorber humedad lo cual rompe al pasó del tiempo las uniones, terminando por separarse. Hay adhesivos con activadores qué sirven para fijar entre piezas los muebles, pero no se usan de forma exclusiva, siempre se aplican otros medios cómo tarugos, espigas, clavos o tornillos. Así qué es importante hacer ésas observaciones, porque por el mismo precio es posible usar otros pegamentos cómo el poliuretano qué no sólo pega, sinó que se expande rellenando. Pará prisas, vá bien el súper pegamento, para una solución de verdad, hay otras opciones, más eficientes, de comprobada calidad y qué soportan los "madrazos del usó diario"

[@user-mk5hx9gh6j]

Точно!

[@AlexSolk]

Ааааа это импортный мастер, тогда, молодец, старается. У нас. такому даже не учат, а если учат на первом курсе ПТУ

[@user-jc9bs1gy1f]

Флакон этого суперклея стоит 350 рублей,а хлыст трубы такого же диаметра длиной ЧЕТЫРЕ метра! -450 .Да,буквально вчера нашёл аналог такого клея,цена 115 р.!

[@43painter]

One can also use cotton wohl in stead of rope plus the superglue

[@mihalykun6715]

Mitől lesz a vatta kemény?

[@43painter]

@@mihalykun6715 The super glue

[@margvelion]

у меня идея! бечёвку9 а её у нас дома много!) наклеить и покрасить в местах стыка, в углы вместо пенопластовых

[@miguelonubaelandevalo]

Con lo fácil y económico que es tapar un orifico con un trozo de tubo de PVC de diámetro superior o pegar entre tubos con enlace adecuados de PVC y con su adecuado pegamento para PVC y hay quien se complica con chapuzas de pegamentos rápidos, aunque entiendo que seguramente hacer un video de reparaciones mas profesional no tendría la misma cantidad de suscriptores que es lo que en realidad se busca en estos videos, cantidad mas que calidad, esta mas que demostrado que los pegamentos rápidos al ser rígidos con el tiempo quiebran antes que los pegamentos flexibles, como lo es el usado para PVC

[@snrankawat6819]

Very good your own technique

[@2ndbar]

Good to know! I have had some similar success with hardware cloth and MMA glue on auto bumper covers.

[@user-nw1lh4tk2x]

Как суперклей держит температуру? Можно ли заделывать подобным образом трубы с горячей водой (металл, пластик)? Не будет ли суперклей размягчаться от температуры?

[@KKoKoRR]

Actually superglue is a cyanoacrylate. It means when its hardened, it became acrylic. Acrylic is hard, transparent, glassy plactic material and doesn't melt or soften in water boiling temperature. It may be more flexible I guess. It's more durable against heat than polypropilen or polyethylen that used pipes, plastic water bottle caps and many plastic home stuff.

[@user-mq6gq1iz8l]

При постоянном контакте с водой, особенно горячей, цианакрилат белеет и отслаивается

[@erkanozdemir67]

Plastiğin üzerine döktüğünüz beyaz toz nedir?

[@Albert_Riseal]

(For wood) Is it really worth it, considering the cost of Superglue? Perhaps a cheaper (yet strong) alternative could be using just cheap wood glue.

[@janami-dharmam]

Is superglue really that expensive (when compared with their performance)? We use superglue by the drops and the common wood glue by the spoons.

[@DavidLaFerney]

You might be paying too much for your super glue. Check out hobby lobby.

[@user-bi4wb6rs4o]

Product from China user

[@glasshalffull2930]

Biggest difference is Superglue hardens in seconds and wood glue takes a day. Also, you can tack items together with a little Superglue and then add the Arm & Hammer baking soda and Superglue to strengthen.

[@MrCreativeEZ]

Though I am a skilled craftsman, I'm still blown away by his skills

[@joselucianomateusmelo84]

What white powder is this?

[@gurshaanbasra3639]

But what does the superglue and rope do?

[@bbwachter]

Super glue find the cord of the cotton or nylon together. This creates a very tight bond that acts like plastic. You can also take super glue and mix it with cornstarch. It makes a great quick drying drywall patch, simply put the superglue on the wall throw some cornstarch on it on a piece of paper Doing that until it becomes solid then paint it normal ever know the difference

[@bbwachter]

Find should be bind

[@dli-cashare5942]

@@bbwachter- - i had tested superglue on cornstarch -- they wouldn't mix, like water and oil don't mix.

[@rubenfranco4956]

Excelentes ideas 👍

[@59131dd]

Super!! merci pour le tuyau!👍👍

[@EXPLOREBLEND1]

القطن أيضا يستخدم لنفس الغرض بدل من الحبل

[@jmartin778]

Thank you

[@user-jd2pu7gt1v]

...конечно же 👍👍👍 !!!....

[@KOT_MATROSKYN]

Заклеить дырку в трубе клеем - гениально. Или в раздолбаную дырку в стене, можно поставить потолще дюбель и всё, так он напихал каких-то тампонов и залил клеем. Сударь, по вам я смотрю всеми известный нам доктор плачет.

[@flamingfrancis]

A cut to length piece of whipper snipper / line trimmer cutting line is also good for filling holes that have become too big. I save the pieces remaining on the head when worn down. Hardware shops also sell plastic spaghetti.

[@krainey]

Dude is the Elon musk of super glue

[@GpunktHartman]

I fix with this stuff a floatchamber from a Suzuki 12oo ...

[@danbromberg]

So that was baking soda you used with the pipe for even more strength?

[@mariaabreu9085]

Excellent!

[@kernchapman]

What about the blue lines on the pvc? Nice tips tho

[@brucewrandol]

Super glue also works as a finish on wood. Work in good ventilation! Use a lint free rag. Put glue on fag and rub all over as you would furniture wax. Hard durable finish. Use the slower to cure glue it works the best. Also use rubber gloves to protect skin.

[@fattmoley6558]

1:30 Now we know how Russia fixed Nord Stream 1.

[@OlivierS-eh3nl]

Génial ! MERCI !

[@michelerendine2830]

Molto interessante, bravo, ma che polverina era? Quella che hai messo con la colla?

[@giulianobianchi1291]

E' UN TRUCCO GENIALE NELLA SUA SEMPLICITA'.

[@brown_krs1]

Oh yeah,I like this!

[@abbyhoffman3867]

MUCHAS GRACIAS, MUY BUENAS IDEAS 🇲🇽👍❤️

[@sarahrenfrow9795]

I just subscribed, first time I have seen you. We’ll have to a M in a little while. OK? These are wonderful fixes.

[@user-if2vd9bm2f]

Спасибо.

[@SamiElwan]

أخي كيف نحفظ علبة سوبر الغراء من الجفاف وخاصة عند أنبوبة مخرج الغراء لأنه دائماً يجف ويمتنع عن الخروج؟؟؟ وشكراً لكم

[@vovanhz7803]

перелей в медицинский шприц с иглой, когда засохнет погрей иглу огнём и всё польётся или купи нормальный тюбик с клапаном

[@user-mq6gq1iz8l]

Храни в zip-пакете в холодильнике

[@user-mq6gq1iz8l]

@@vovanhz7803 И сколько он хранится в шприце? В родном тюбике он густеет постепенно из-за попадания влаги в воздухе, а при переливании в шприц он наберётся влаги ещё больше. К тому же, резиновый поршень приклеивается.

[@SamiElwan]

@@user-mq6gq1iz8l My brother, how do we keep the super glue can from drying out, especially at the outlet tube of the glue, because it always dries out and refuses to come out??? Thank you

[@user-mq6gq1iz8l]

@@SamiElwan Храни тюбик с клеем в zip-пакете в холодильнике.

[@fishingwithfilitsa]

Super

[@JillofAllTrades2]

What did you use on the PVC pip .?

[@traianhristov748]

Probably baking soda.

[@fourgedmushrooms5958]

Lash with dental floss then super glue over. Super strong and light

[@sweetdrahthaar7951]

I’ve been doing things like that with superglue for 40 years.

[@bharatwarsh8926]

Making gear teeth! Just got me stunned. Thanks!

[@kabukiarmadillo]

Good trick with the screws. The wall screw though? What happens when you want to remove it because you no longer want to hang the wall art -- or whatever else -- there?

[@AzTurboMini]

I would assume you'd spackle over it/cover the small hole then texture and paint?

[@user-vy9pz8kc6x]

Отличная идея, 👏👏👏

[@user-kt4rh3lu1k]

у нас на Руси есть такая вещь с незапамятных времен! Называется деревянный чопик! Говорят помогает...🤦‍♂

[@user-mq6gq1iz8l]

Херня этот ваш чопик. Он постепенно разваливается, особенно в ванной и легко разбалтывается. Я как минимум 10 отверстий с чопиком переделывал на супер клей с мелкими опилками, получается намного надёжнее и прочнее, от влаги не разваливается.

[@brokenheart9997]

من فضلك. ..هل . اذا قمنا. بخلط سوبر غلو ..مع مسحوق قلم رصاص ...يصبح. عندنا غراء ..بمعايير. arametale

[@sdavidleigh6642]

What is the white powder he used in fixing the tube?

[@mikeanthonyevans]

Probably baking powder. It works great with superglue.

[@REIRBL]

very good! 👍👍👍👍

[@aKAP7681]

What kind of powder do you use to fill the cavity? Baking soda?

[@randomtask9029]

Think it's talcum powder, not sure though

[@covid_is_lie]

Baking soda

[@glasshalffull2930]

I didn’t have any Arm & Hammer baking soda and tried talcum powder and the talcum powder didn’t work well.

[@aKAP7681]

Ok, so the backing soda is better. Thank you very much.

[@perkinscurry8665]

Baking soda is used as an accelerant, causing the superglue to cure almost instantly. I would use something inert as a filler and then top it off at the end with baking soda to quickly harden.

[@teunbonhof837]

wordt duur aan secondelijm zo nieuw buisje is goedkoper en helpt toch maar even zo

[@ilyas5607]

Мудро!

[@tiempoveganoprovida2247]

Excelente...!!!

[@guv1940]

Мистер СуперКлей!

[@adolfoperez7761]

Que significa Súper Glue soy de Venezuela

[@z454]

Cool!!!!

[@serdarsert13]

Teşekkürler

[@sudokero5422]

Good

[@MAKAR_3.14]

Что за хрень собачья?!!! Саморез в дерево и так завернётся. В стену - сначала хороший дюбель, коих великое разнообразие имеется, потом уже саморез. Суперклей недешёвый для такого баловства. Да, в некоторых случаях он в содружестве с содой и, ладно уж, верёвкой, может сработать на ура.

[@chuymartel1778]

Nice 👍

[@user-fx9fh9cc1s]

Здравствуйте, скажите пожалуйста что это за клей такой?

[@Aleksandr_Ivanov41]

Вот ты дятел)))

[@softveres]

Nice! Could you please send me what the name is this glue? What kind of glue is it? Thank you in advance!

[@user-mq6gq1iz8l]

Judging by the preview, GoldFix

[@starkwedder9787]

Superflue? There are many different types… can you specify?

[@probleemnpoarneemn3215]

never put somthing one the inside off the pipe [1.48 min]

[@R.C.425]

nice 😁

[@alexkirlian]

Like this.... 👍🏻

[@igorigor213]

Любая конструкция должна быть разборной, для ремонта, или модификации. Правила технологии производства, преподаваемые в технических Университетах 60х-70х. годов.

[@user-hk1tp2li1z]

what kinde of glow is it name

[@ChainsawFPV]

Who would have thought super glue would make thread hard........

[@jaystonkey]

I'm doing that!

[@donwright3427]

I think the fumes are bad and make eye stingy if hot indoors bad sticky use rugby

[@ulixesulixes5768]

Очень годная информация.

[@BECHA1977]

разве пвх труба клеится суперклеем?

[@michaelschum840]

легко

[@naomisnider8841]

Am I missing something? What is the point of #1 in the video?

[@fatiherguner1134]

what is that powder?

[@philsharp758]

In the description to the video it says baking powder.

[@andries1704]

There are plenty videos on youtube regarding the use of baking soda.

[@jerichojoe307]

Good in a pinch. But cyanoacrylate is not exactly cheap so it's not really cost-effective. Just buy a wooden dowel rod to cut your own dowels and fix 90% of those problems for the cost of what just the cordage costs🤦

[@pierrericard4687]

Quelles idées géniaux

[@user-pd1ki4ns6g]

если сделать соду с порошком 1:1 от простого карандаша, то будет вообще бомба, исключив чистую соду...